You can also press Confirm TO Data to auto-populate the perf page, instead of entering the V speeds and flex temp manually.

At last I was able to set everything right. Thanks to your step by step instructions I succeeded to fly an airliner. and even landing it safely. Nice video. Keep up the good work. Thank you very much

This is just wonderful to watch, over and over, you make it look so easy. Respect due.

Great content as a tutorial and really informative. Thank you. I will have to watch you more often.

OMG, simple and to the point. No nonsense, no extra bs. you sir got a new subscriber.

This is really brilliant, everything in under 7 min. Thank you

Oh wow. Favorite airliner by favorite 3rd party dev, favorite tutorial youtuber. Now I am *hyped* to fire up the sim once again.

Yes love this channel, It has great vids full of info. Thanks

thank you so much for this, been stuggling like mad with the new A320 new v2

Great video

Excellent video, thank you. Is there a magic click spot to get the up or down arrow to utilize managed mode?

Thanks for this video, excellent! I do have a couple of questions. At 5:25 when you start decent - you show having a down arrow on the mouse. I have tried about 50 different angles - mouse button presses - from the top, from the bottom, etc. I never see that down arrow, just left click, right click, center click. I managed to get an actual vnav decent only once out of about 30 tries, and I'm afraid I don't remember what I clicked. Ugh.... Also, at 4:35 you look at the iPad thing... Mine looks different, it does not show the "///"s or QNH. No baro no matter how many times I refresh or search. Any assistance would be appreciated. Thanks. Also,

Thanks for this concise and informative video! I have 2 questions that I hope you can help me out: 1. In V2, some important Instrument Views are missing. In V1, I was able to quickly switch to the MCDU view (to set INIT, PERF and F-PLN) with Ctrl+5, and the overhead panel view (to toggle Battery and lights) with Ctrl+8. Did you find these 2 instrument views missing? 2. After landing and with throttle stick at 0%, my V2 will somehow have enough thrust to be moving forward. I apply full brakes to stop it, and then when I release the brakes, it moves again. I verified visually that the throttle position was indeed at 0%, right above "Rev" zone. Does this happen to you too? I also noticed steering during taxiing is very unresponsive. This is because by default, Rudder controls tiller is disabled; so we have to enable it at the EFB. That took me a long time to figure it out, and I just saw that you have a video on that.

Can you do a video on the A320 v2 from cold, setup, takeoff ,landing setup,landing and shutdown all in one??

They updated the default A320neo??? This is absolutely gangster news.

5:10 the aircraft DOES calculate top of descent but you need to enter the weights in the init B page which can only be done with engines off.

If the ils frequency is wrong or isn't in there you have to put a / in front of it or it won't take it. It's not like the others. /110.7

Bro this video is great! Really helped me out. You should do one for the A310

Really helpful video. Although at 1:58, when I hit calculate I just get “unable to find safe performance data”

Just to share my experience: at 1:54 to enter weight into EFB, I cannot enter using the format "047,8" as the EFB gives an error. Instead, I use this format "47,800" and it works. Interestingly, the EFB gives me V1 and V2 at 150 knots, much less than yours at 138. My A320neo V2 has the same weight as yours but weather conditions is very much different; ambient temperature is around 30 degrees Celsius.

In my experience of this plane so far, I can't get it to show the "dot" indicators for managed mode most of the time , and never at all for the airspeed selector. It also went bananas on descent suddenly, at about 4000ft it suddenly tried to power climb as I was approaching Paris .

I just wanted to know how to turn on auto pilot on Xbox external view because I got the frontier pack so it is the a320 V2 but the tutorial is nice. Still not sure how to turn on autopilot on external view because when I press Y is does not turn on is there a way to make my liverys on the first one?

Great video. For some reason I can not get ATC clearance. It won’t let me select it. Could this be something to do with GSX I have installed? Thanks

No matter what i put into the fmc the hdg green line on the nav display is a straight line ahead without any waypoints. I put the flight plan into the world map in game, no simbrief. Can you help me?

So thats why the auto land isn't working here... i forgot to switch off the auto throttle and he floats all the runway... (actually in FBW this happens automatic) in fact i find this Ini better that the FBW, more realistic, more stable. the internal sounds are great (the external sounds are horrible however...) now we just need to know if he can do RNAV/RNP approaches, can you make a video trying that? Thanks

Answered some questions I had. 👍. Idk why they reversed the rudder inputs on this aircraft. Every time I input left, it goes right, vice versa. So annoying for landing and takeoff. I’m literally on the dirt by the time I roll or stop. That, and I have random hard crashes and bugs. Glad this apparently won’t get updated anymore since this was the last update.

After take off which dial am I using for the managed altitude? The left one or the right? Also, this doesnt seem to work for me on xbox. Am I clicking it in or out?

Not sure if this is just me, but the ILS freq no longer seems to pull through to the radio nav screen even though it was set on the world map.

for me the nose wheel feels tight and i cant taxi it Edit: i figured it out there is a setting in the ipad abt the tiller and the rudder. Turn both of them on. I think its the auto tiller disconnect and smth else right above.

Is the approach phase for example activating it self after setting it up in the mcdu or do i have to activate the phase

Is the waypoints integrated when you select your dept-arrival? bc i need to whrite the waypoints manual

Tried turning on approach on g/s and AP1 and 2 but the plane doesnt descend lower than my set altitude. It should lower my plane automatically.

How do u turn on nose wheel steering cause I can bearly turn sharp

Does the V2 have auto landing as well as there are confusions on Whether it needs manual landing or it has autoland like default

I’m not sure if it’s only happening to me or other people to but when I put rudder input the rudder only moves the plane a tiny bit to the side that I want to go

Could you do a retake on this and enter the airways in between the arrivals and departures please

that was quick

How do you find the QNH? I cant seem to find it in the tablet

why does the inibuilds a320 neo v2 fmc say not allowed on every input i make

Great video, but sorry to ask a ridiculous question. I can not get my PFD or ND to start up properly. I'm obviously missing something simple, but could you please enlighten me?!! The ND will show the plan page but not the ARC. The PFD just shows outlines of the information in red....TIA

How do I get it to follow my flight plan? Cause all I can do is take off and it won’t follow the flight plan

Can anyone help. I do all that it says and then my plane ends up just doing circles in a very steep climb

How do you find your SID and TRANS on simbrief

Whenever I start taxing the plane doesn’t respond to rudder inputs

the rudder and ground steering doesn't work for me. Does anyone know why

My plane wont even autoland when i have enterered The arrival runway and selected the right ils freq it is not saying landing what do i do wrong?

I must be doing something wrong when it comes to the descent phase. When the plane levels off at the lower altitude the engines stay at idle, and even changing the speed in the speed window does nothing. The aircraft continues to slow until it reaches almost the stalling speed, Then the automatic protections kick in and the plane accelerates and climbs. Any suggestions would be appreciated.

I need help, whenever I try to enter the weight on the EFB it says unable to find safe performance weight can you make a video on this or help in any way

Im playing on Xbox and the throttle dosent adjust to the speed i want, instead when I try to move it, the throttle has different adjustments, like 0, 1, 2, 5, 10 etc. how do I fix this?

Just wondering do you still have to use rudder/tiller control when you land on the runway or does auto pilot 2 keep it straight?

I don’t get how this plane doesn’t calculate TOD, is it a limitation of inibuilds? Or is this something has to do with the neo itself? How the a310 is doing this automatically while the newest neo cannot? Thanks for your tutorials 😊

When I clear the flight plan discontinuity it says “not allowed” everything else is spot on though great video.

Does the MCDU calculate the miles to destination whilst flying?

Is there a way to make the game ATC work with the aircraft? It doesn't work for me

Ty for this video tis EFB confuses me im used to the FBW EFB

I start cold and dark and after all is done, engines are running and as soon as i move the thrust levers to move the aircraft, it goes back to cols and dark....what a waste of update...

Is it normal that when you activate managed descent, it descends half heartedly at about 300ft/min until it's about 1000ft lower than cruise, then levels off for 8 minutes, then starts descending at 1200ft/min but dropping airspeed to about 150 knots because it's too close to the destination already ? EDIT: as soon as it turned onto the STAR (still thousands of feet too high) it shut off the AP and accelerated upwards with "TOGA LK" in the annunciator. I had been following your tutorial exactly, using the same route ,same altitudes ,same STAR. The only thing different was the weather and weight. None of this makes sense.

How can I make this aircraft follow a VFR flight plan on the World Map, without having to punch data into the MCDU?

It does have TOD marker.

My Auto pilot always turns off on the Xbox. Does yours?

Nice demo. But what about ATC?? No option to send the flight Plan to ATC.

How to communicate with ATC? and increase the volume of the dispatcher's voice

Thank you so much you gained a follower from me I’ve been looking for an easier way to fly this plane I would like to join the discord as well

I’m guessing you still need to select activate appr on fmc

Is there a way to set approach speed? Thanks!

Are the liveries on the marketplace?

Where we get a320 neo by inibuilds?

For the V Speed you can just click Confirm data and it will do it 2:13

Nothing you say is working atc makes me climb to 380 managed mode doesn't work. Plane flying to fast and I followed every step

Will ATC automatically tell me when to start descending?

Do only I have prbolem with turning plane on one side while ganing speed on a runway? It is impossible to keep the aircraft on the runway, because its runing right :/ Anyway great tutorial

Everything worked fine, until I was close to GLW. Then the plane went straight off the the course without a notice. AP was on and also approach mode. Very strange. Had to abort the flight.

What is a SID and how do I find it

Why does the Mcdu say gps primary

Love the content but plane is bugged as hell i cant even use the rudder blus throttle doesn’t work ( I know what I was doing)

What is "BARO" In the appr PERF PAGE?

First thing Switch on Power Supply-Battery.

why terrain inop ?

Could do with it at a slower pace

No gira la rueda de nariz, helpme

Omg nothing works I'm flying away from the flight path how is this possible when following this video exactly

Does this work om xbox

This might be better than flybywire

Can not clear F-Plan discontinuity… why is this?

how to set NAV mode?

Aircraft is completely broken on xbox. Doesn't follow flight plan, either just flies straight on or just keeps spiraling above depp airport. When pressing B button to reduce throttle from TOGA to climb, it just snaps back to idle, and ILS FREQ for Glasgow is wrong and it won't let you change it. Unbelievable!

This aircraft is way too out of control I can barely control it even with the auto pilot off and with autopilot on it doesn’t even go in the flight plan path it goes off in the opposite direction and when I press the A button on the Xbox controller it automatically goes full speed even when I’m just barely nudging the button so when I’m taxing it goes full force it’s too buggy on front the Xbox version

This new addition A320 is a nightmare to steer on the ground anyone else having trouble?

autopilot isn't work 😥😢

Its full of bugs cnt do a normal flight allways something not responding or not working properly or jaming🤬

One video closer to the 777 lol

Xbox version is very different here

Has to be the worst ever. All aircraft are 'pink' when you get on the runway, etc. And yes, I have Premium & Deluxe versions of FS2020.

your tutorials are really bad you don’t take time to explain anything and you move way to quick