MTM Hydro PF22.2 | The Best Foam Kit

Рет қаралды 34,871

4 жыл бұрын

We’ve teamed up with Detailing Shed, in conjunction with MTM and Gtechniq to test out what is widely viewed as the best performing Foam Cannon on the market - after setting it up and now having down experience with the PF22.2 - we can agree!
In this video we test out the full setup from MTM, including the SGS28 spray gun, the MTM angled lance, and the PF22.2 Foam Cannon adapted to work seamlessly, with a quick disconnect system on a Karcher K4 Pressure Washer.
SGS28 & PF22.2 Kit:
detailingshed.com.au/collecti...
Gtechniq W4 Citrus Foam:
detailingshed.com.au/products...
Thanks to Detailing Shed, MTM & Gtechniq for supplying the products tested.
detailingshed.com.au/
www.gtechniq.com.au/
Disclaimer: Products were supplied by Detailing Shed, though this video is NOT a paid sponsorship.
Check out the Omni Garage website omnigarage.co.nz
#MTM #FoamCannon #SGS28

Пікірлер: 59

@OmniGarage 4 жыл бұрын

Just a couple of quick corrections we’ve noticed since publishing, and some handy additional information: - The MTM lance has a 15° degree Bend (not 40 degrees as mentioned in our discussion during the video) - The PF22.2 nozzle can switch to 90 degrees, from 180 degrees. - The Stainless Steel Swivel is built into the SGS28 - extremely handy! - 3/8 SS plug comes with the kit, so if you need to upgrade from a Karcher to Kranzle the fitting is included and ready to be switched out. - Foam Cannon comes with the regular 1.25 mm orifice installed and 1.1 mm orifice in the box. It's better to use the 1.1 mm orifice with regular pressure washer with less flow < 1.9 GPM. When the higher flow pressure washer that has more than > 2.0 GPM use the standard 1.25 mm orifice.

@detailingshedau 4 жыл бұрын

Excellent Video. Please keep them coming. Thank You

@OmniGarage 4 жыл бұрын

Thanks for the collaboration. Looking forward to the next part of the series.

@cleftoftherock6797 2 жыл бұрын

Excellent review. Thanks Mate!!!

@OmniGarage 2 жыл бұрын

Glad you enjoyed it!

@nessviggo 2 жыл бұрын

Just a tip, always water first, then product at the top when diluting your soap👍🏽

@JC-dc9oz 2 жыл бұрын

good tip. I didn't know that either. thanks

@vikhyatraghav Ай бұрын

Hey there! Just watched your video and have couple of questions. Please answer it:- 1. I am also looking to buy MTM HYDRO SGS28 Gun with swivel but amazon doesn’t offer the fittings like quick connects. 2. I have Bosch Aquatak 125 bars pressure washer machine, so how do i connect hose pipe with MTM Hydro SGS28 swivel gun.? 3. And, what was the angle lanced(just before you plugged the kachre connector) the will you provide link from amazon so i can buy it

@fozzie145 4 жыл бұрын

Don't forget as well you can adjust the front grey part of the foam gun nozzle section to change the fan direction from horizontal to vertical. In the video it was halfway between and as you started foaming you even turned the bottle sideways to compensate it being in the wrong spot.

@OmniGarage 4 жыл бұрын

At first I didn't think you could. But naturally the more I used it the more I figured it out! Thank you for noticing and dropping a comment! How do you like using the MTM foam gun?

@fozzie145 4 жыл бұрын

@@OmniGarage I haven't got mine yet. About to order and just watching every video ever made of them during my research phase :) I came across your video on the detailing shed website. Now I have a new channel to watch. 👍

@OmniGarage 4 жыл бұрын

I hope the video helped in making your decision. The video is a true representation of the foam cannon in action. We both recommend this foam cannon over the Meguiars foam cannon (check our other video on this). Detailing Shed has a few different options when choosing the right connection for your pressure washer. Especially good if you have a Karcher.

@edgarm8933 3 жыл бұрын

Would this connect with a sunjoe pressure washer without having to purchase any other fittings ?

@OmniGarage 3 жыл бұрын

In order to connect to a Sunjoe, two other fittings are required. See 24.0481 and 24.0448 to adapt to these models (linked below). www.mtmhydroparts.com/products/m22-screw-adapter-x-3-8-coupler www.mtmhydroparts.com/products/14mm-plug-x-15mm-plug-conversion-adaptor

@michaelmosberger1245 3 жыл бұрын

The little screw you refered to in the package is a smaller orfice for lower power pressure washers. It's a 1.1 vs a 1.25 that's in it from the factory. If you install it with your electric pressure washer. There will be even thicker foam! 😁 And there is no need to Teflon tape fittings with o ring's. Have my set up on the way. Without the lance it's $107 in the USA. Plus I'm not planning on using lance with the spray gun. Also another nice thing about the MTM 22 you can adjust the spray horizontal and vertically I just bought the 40° MTM nozzle guard. Check them out. You will really like them for your spray gun. 👍

@OmniGarage 3 жыл бұрын

Cheers for the info.

@juansotelo2748 2 жыл бұрын

What electric pressure washer do you recommend for the mtm 22?

@OmniGarage 2 жыл бұрын

The Karcher K4 is the pressure washer we have and is the only one we have experienced. We haven’t tried any others.

@joshuaschubert6276 4 жыл бұрын

Available for the gerni ?? In Australia 🇦🇺

@OmniGarage 4 жыл бұрын

If you go onto the detailing shed website there is a option you can click for a Gerni adaptor. See link below detailingshed.com.au/products/mtm-hydro-pf22-foam-cannon?variant=31412776304779

@ProxityProductions 3 жыл бұрын

Is the older pf22 and sg28 bundle still good ? Got it off amazon for 100$

@OmniGarage 3 жыл бұрын

It’s a great bundle! You’ll enjoy it for sure.

@pengasus 2 жыл бұрын

Same cannon, different canister.

@MatheusSantos-wn9io 3 жыл бұрын

Your pressure washer which one is it ?

@OmniGarage 3 жыл бұрын

It’s a Karcher K4.

@antonyv8171 3 жыл бұрын

Since u have the K4, did u change the inner orifice in the foam cannon to the 1.1mm orifice that Nick provided? Or did u leave it standard with the 1.25mm in the cannon? Thanks

@OmniGarage 3 жыл бұрын

This is the 1.1mm oriface.

@antonyv8171 3 жыл бұрын

@@OmniGarage I find it strange how my K4 doesn’t like the 1.1mm orifice in my PF22.2 - it makes the foam kind of thick but watery, but when I change to a 1.25mm orifice that I have, I get absolute shaving cream foam? 1.1mm perhaps putting too much strain on the K4 unit and it flows much better with the 1.25mm? I get literally shaving cream suds.

@OmniGarage 3 жыл бұрын

Not sure what is going on here. May be have a play around with your soap to water ratios.

@antonyv8171 3 жыл бұрын

@@OmniGaragereally strange. I use the 1.25mm in my PF22.2 with 100ml soap and 500ml warm water and it produces shaving cream foam. 1.1mm just won’t work properly with my K4 with the same ratio. No idea why!

@donalexey 3 жыл бұрын

@@antonyv8171 This could be due to Karcher K4 is different for 110 and 220 outlets. 110 volt versions have restricted power. more noticeable difference with K5

@Mathewmartialart 3 жыл бұрын

so the swivel adapter needs remoworking since as you just showed, you might aswell has just turned the handle itself to do the same job.

@OmniGarage 3 жыл бұрын

👍

@23hublock1 3 жыл бұрын

Come on guys, get a Kranzle...and end the frustration of 26:13 lol

@MJJCvideo 3 жыл бұрын

Hi guys, would you like to review the new MJJC foam cannon pro？

@OmniGarage 3 жыл бұрын

We’d love to give it a go! Feel free to email us theomnigarage@gmail.com

@KM-gh3ob 3 жыл бұрын

For a product that's up there price, the reservoir could certainly increase in capacity. Refilling would be irritating after a while i.e washing my truck, a lot more surface area to cover

@OmniGarage 3 жыл бұрын

@PerpetualApex you could get another MTM replacement bottle. They’re pretty inexpensive.

@nessviggo 2 жыл бұрын

I use 3:7 dilution in the bottle and I can wash around 8-10 cars on that so it’s very efficient . If you use a lot from the bottle dilute it with more concentrate.

@OmniGarage 2 жыл бұрын

Is that what you’re getting from a gallon at a 3:7 ratio?

@nessviggo 2 жыл бұрын

@@OmniGarage a gallon? No, the bottle I have is 1000 ml and I use about a 100 ml diluted product on one car.👍🏽

@OmniGarage 2 жыл бұрын

We use 150mL of product to 600mL product in the foam cannon. So a 1:4 ratio for us, seems to work really well!

@SomeMadRandomPerson 3 жыл бұрын

I thought he was saying Detailing Shit instead of Shed 😂

@OmniGarage 2 жыл бұрын

😂

@pengasus 2 жыл бұрын

Interesting review. But you don't screw on plastic to brass or any other type of metal EVER. They included that teflon tape not only for the gun but for protecting the canister from getting ruined by the cannon head. Or you'll end up getting new canisters constantly.

@OmniGarage 2 жыл бұрын

@pengasus we have had this foam cannon setup for 1 year 10 months which has been used nearly every week. The canister has been unscrewed and washed out after every use. To date never had a problem with it and haven’t had to replace the canister.

@SUPERSID1968 2 жыл бұрын

Big disappointment you get a brass connection with the stubby gun I've bought all mtm extras to go with my kranzle all with stainless steel swivel connections that cheap brass fittings would play havoc with my o c d lol the kit is pricey as it it over in England it's £130 for the s28 and version 2 snow foam lance i purchased both separately for £110 all with stainless steel connections and swivel on the gun best set up in my opinion with the king of pressure washers the kranzle 1152 tst just wouldn't entertain them yellow peril karcher plastic tat with the pants motors lol 😝🤣🤔

@OmniGarage 2 жыл бұрын

One day we’ll have the opportunity to experience a Kranzle!

@bohmdan81 3 жыл бұрын

what the ,!!!!! 400$ 🙄

@OmniGarage 3 жыл бұрын

It is better than our other $100 Meguiars one.

@joefro9473 2 жыл бұрын

WE'LL SAVE KZfaq VIEWERS A BIG HEADACHE:: ACTUAL FOAMING DOESN'T START UNTIL THE 15: 15 MARK!!!!!

@OmniGarage 2 жыл бұрын

👍

@Nikosone1 9 ай бұрын

It took you 27 minutes saying the same things over and over again to make a video that takes 5 minutes very tired watching this plus you don't know what some parts are for

@OmniGarage 9 ай бұрын

Looking forward to watching your 5 minute version of the video 👍