No video

Much easier way to recover SD card data? FIGHT

  Рет қаралды 75,687

StezStix Mix

StezStix Mix

4 ай бұрын

Thanks for all the comments on the last video on this. Yes, I told you I was an idiot.
Anyway, some people suggested simply using cardboard to stick the remains of my SD card to, whilst others suggested repurposing an old Micro-SD to SD card adapter.
Other suggested a 3D printer, but I don't have access to one of those yet!
So let's test out cardboard vs Micro-SD adapter. I'm sure both will be easier than my ridiculous wires. Right?
Hope you enjoy!
Steve 2

Пікірлер: 240
@digitalgord5694
@digitalgord5694 4 ай бұрын
Those criticizing Steve haven’t been watching since the start. Steve’s been teaching himself over the years and is sharing his journey with us. He’ll even say in the show, “I don’t know” or “I’m not sure”. Ignore em’ Steve, good on ya.
@MarcWeertsMusic
@MarcWeertsMusic 4 ай бұрын
Absolutely, the man has a positive attitude, is eager to learn and will not easily give up. And he’s fixed stuff more often than not. Also, he’s a great singer. 😅
@ikkezegtie
@ikkezegtie 4 ай бұрын
"i wish i knew more" is probably gonna end up in his obituary. Well done Steve, because of your channel i now have an entire setup and fixing stuff myself.
@minmogrovingstrongandhealthy
@minmogrovingstrongandhealthy 4 ай бұрын
We live and learn. That's all there is to it.
@yosoydorex4517
@yosoydorex4517 4 ай бұрын
😊
@yosoydorex4517
@yosoydorex4517 4 ай бұрын
😊
@Loki-
@Loki- 4 ай бұрын
"Why didn't he do a thing I thought of?" Because hes a different person... what a concept!
@danbrown5569
@danbrown5569 4 ай бұрын
Yes the cardboard worked but the first way soldering the SD and figuring out the clip touched for ground was way more interesting and entertaining, well done Steve for being creative informative and entertaining and making money off the haters with an extra video for them to falsely feeling smug about, keep being you that's why we watch
@StezStixMix
@StezStixMix 4 ай бұрын
Haha, very true! Thanks Dan 😁
@andymerrett
@andymerrett 4 ай бұрын
yes definitely much more interesting. I mean, how interesting is cardboard anyway? :)
@squidjam
@squidjam 4 ай бұрын
Always remember: they are brave enough to criticize, but not enough to have their own channel. You're great, Steve! Lots of love.
@StezStixMix
@StezStixMix 4 ай бұрын
Thank you! 😊
@minmogrovingstrongandhealthy
@minmogrovingstrongandhealthy 4 ай бұрын
I agree but only with the 1st part. While for the 2nd all I will say that having a profile or channel whatever, especially in the past 10 years up to today is a miracle and overall luxury. And in my case I am lucky to be alive let alone be able to do jack s--t online, aka ocean of spam, AI, bots, parasites, politics and overall an cesspool of human waste ... Many of my friends and me were used and abused by Google and others, we burned years on these parasite platforms. Learned on that mistake and never do it again. So if someone doesn't have content, it doesn't mean they are less worthy by something ... that is just too ignorant and dumb to say. But yeah nothing wrong with Steve's channel, it's a pleasant step out of the common trash, is like one of those needles in a haystack that when you find it you kinda wonder if you traveled to another dimension or something ... If someone hurts you online, don't read too much into it, block that person or bot and move on, life is too short, even now we talking about it is a luxury and waste of time at the moment ... Should be common knowledge by now really that mean, sick and evil people exist online and will be more and more of them each year because A) questionable people casually reproduce and there is zero parenting going on B) the kids are left to be parented by media and the internet and sadly they are exposed to the worst things, one of which is brainwashing and the 1st "program" they run through It was a thing for 15 years or so, so yeah sadly we live in this mess, learn to ignore and move on. But on topic of the video. Yeah cardboard is great but if you want to repurpose old cards and actually still use them (I highly suggest repurposing and recycling things) I suggest make them out of plastic, like credit cards, payphone cards or similar things. On a related note in my entire life I never bought a single guitar pick, instead I made them out of random plastics phone cards and the things mentioned above. I could never find ones in stores I like or fit my needs, also they tend to be expensive so as easy to loose so I rather make them out of scrap if I loose them I can make another. All I need are two things: scissors and nail file. Saves me time and money for other things ... Thanks for reading and as always hope you learned something just as I learned too from things on here. Have a good one.
@stevenbenson9976
@stevenbenson9976 4 ай бұрын
@@StezStixMixwhat about repurposing an old like 512mb or 1 gb sd memory card?
@ekspatriat
@ekspatriat 4 ай бұрын
You wanna get that published.@@minmogrovingstrongandhealthy
@VashStarwind
@VashStarwind 4 ай бұрын
Or maybe they were just trying to help out, and also they dont have the resources.. Pretty entitled statement
@wat5713
@wat5713 4 ай бұрын
If you guys ridiculed Steve for something he didn't know or think of, just think of all the times you didn't know or think of something that you later knew about.
@1337Shockwav3
@1337Shockwav3 4 ай бұрын
It's not about making him look like an idiot or making fun of him - his initial solution is perfectly fine and if you enjoy soldering way better than working with scissors/snips and hot glue BUT with a certain size of audience and a certain skillset one can make a solution that works for steve (that has a certain risk of failing) look way more accessible than it is. He's been greatly living up to his responsibility as a youtube creator with this video - very well done.
@chandlerbing7570
@chandlerbing7570 4 ай бұрын
it's the internet, they'll ridicule a block of cheese for being a block of cheese
@Loki-
@Loki- 4 ай бұрын
​@@1337Shockwav3 You are optimistic if you think some people in the comments aren't coming from a place of hostility.
@adamgrimsley2900
@adamgrimsley2900 4 ай бұрын
Never
@dougaltolan3017
@dougaltolan3017 3 ай бұрын
Didn't you know, some people are born perfect... Just in case of doubt, that IS sarcasm.
@bokkenka
@bokkenka 4 ай бұрын
Whoever said, "Whoever said, 'Cardboard', well done," well done.
@HappySlappyFace
@HappySlappyFace 4 ай бұрын
Whoever said, "'Whoever said, "Whoever said, 'Cardboard', well done", well done.'" Well done.
@StezStixMix
@StezStixMix 4 ай бұрын
🤣🤣
@MrMistoffelees
@MrMistoffelees 4 ай бұрын
This little exchange has brought a 40-year old memory crashing back, when someone wrote into Smash Hits about ELO's song saying, "I can't get 'I Can't Get It Out of My Head' out of my head".
@charlesmott8863
@charlesmott8863 4 ай бұрын
@@MrMistoffelees🤣
@paulsengupta971
@paulsengupta971 4 ай бұрын
@@HappySlappyFace Who said that?
@Poweruser75
@Poweruser75 4 ай бұрын
it's sad to hear people were mean to you... You seem like such a nice fellow :) You're only here to entertain us with fixing stuff and you do a BANGER job!!! I appreciate you and everything you've done for us thus far! Thanks for the years of awesome :)
@StezStixMix
@StezStixMix 4 ай бұрын
Thank you! 😊
@DocRekd-fi2zk
@DocRekd-fi2zk 4 ай бұрын
I can't believe that the "just cut a cardboard and paste it on" was the less jank solution
@SchlegFace765
@SchlegFace765 4 ай бұрын
Bravo on the follow up, Steve. Just goes to show you, there's more than one way to skin an SD card!
@StezStixMix
@StezStixMix 4 ай бұрын
😁
@kevinwiseman5313
@kevinwiseman5313 4 ай бұрын
Steve is a stand up guy. Entertaining, instructive and no arrogance. I support him on Patreon and here because he is doing what I am not brave enough to try. Go Bro!
@Sunila_DragonladyCH
@Sunila_DragonladyCH 4 ай бұрын
Worked fine, but was it as much fun? :) Never apologise for being creative! That's why I love this channel so much.
@OlegSmileSSToRM
@OlegSmileSSToRM 4 ай бұрын
I liked the wire one more. It was amazing
@rog2224
@rog2224 4 ай бұрын
For some reason, it seemed very 11th Doctor.
@mintpalmer
@mintpalmer 4 ай бұрын
The idea that someone was mean to you makes me a little sad. You're such a nice guy!
@_Doc_Holiday
@_Doc_Holiday 4 ай бұрын
The ones being mean are just bottom feeder losers hopefully he didn't lose any sleep over it.
@TheMadFlasher
@TheMadFlasher 4 ай бұрын
Gotta love the KZfaq comments. No, "hey Steve, have you tried cardboard instead?". They'd rather say "why didnt you try cardboard you daft, hairy bollocks". Keep up the good attitude Steve, to hell with the arses.
@StezStixMix
@StezStixMix 4 ай бұрын
🤣🤣🤣 brilliant
@No1BRC
@No1BRC 4 ай бұрын
I hope me mentioning fixing my broken card with a mSD adapter didn't sound rude. It wasn't meant to, I just said it as I needed a permanent fix for it as back then, 16Gb SDs were rather expensive. Keep up the good work, it's always different approaches that inspire all of us looking for solutions.😊
@brandoncolemire4220
@brandoncolemire4220 4 ай бұрын
How the hell can people be criticizing Señor Fix?!? This is one of the best (actual best in my opinion) channels producing this type of content. What a bunch of Schmucks
@Namistai17
@Namistai17 4 ай бұрын
As someone who has watched almost all of Steve’s videos in the last 6 months his solution was more fun. Efficiency doesn’t always develop a skill and that’s what he has done. I’ve been practicing my soldering since COVID started and I can say for certain it’s always more fun when you find a project to use your tools on. Cheers Steve, keep up the good work.
@MrBobWareham
@MrBobWareham 4 ай бұрын
I dont understand why people are so rude when they could just be helpful, much nicer!
@zorko8920
@zorko8920 4 ай бұрын
Yeah don’t listen to the negativity. Most of your viewers like myself are learning with you and are enormously thankfull for experiencing your discoveries with you Steve! Thank you for all the great and entertaining content!
@coryrosenberg3954
@coryrosenberg3954 4 ай бұрын
I watch your videos everyday as a way to relieve stress, forget the world around me and learn new things. Your channels awesome and fun!
@PJ-wm9nq
@PJ-wm9nq 3 ай бұрын
Just think, if you hadn't done it the other way, we'd never have seen the depths of your ingenuity!
@HuskyObscura
@HuskyObscura 4 ай бұрын
Can’t afford to give much money due to medical bills, but this was in my algorithm and I love the channel. Keep your chin up, i’ve been dealing with my own issues of criticism too. People are harsh, but we appreciate you. I hope my contribution helps, even if in the slightest.
@StezStixMix
@StezStixMix 4 ай бұрын
Thank you! Very much appreciated 👍
@markhearsey4294
@markhearsey4294 4 ай бұрын
I preferred the first way you did it, the general consensus is that you repair/modify electronics with your soldering iron… It’s even better though when you launch components with your hot air station 😂
@ScandalistRick
@ScandalistRick 4 ай бұрын
You could just argue that people come here to watch you perform microscopic solder jobs. You were just giving us the content we want by choosing to do it the hard (Steve) way. For years my soldering has been very surface level, you've given me the confidence to finally try micro soldering jobs I went and bought a digital microscope!! Always inspirational and entertaining Steve, keep up the great work!
@TheFalcro1234
@TheFalcro1234 4 ай бұрын
Bravo! And now that you have done this experiment, you now have those to use technically, as long as what you have modified on the micro SD adapter or made from cardboard doesn't break or become compromised in some way, neither of those needs to be remade. Simply toss into "custom tool" place and re-use as needed . Thanks for doing all of this interesting content for us to digest and enjoy
@ProfSimonHolland
@ProfSimonHolland 4 ай бұрын
as a fellow YT creator....its a amazing the comments we all get from folk who have never made any content.... peace
@M.W.Zastrow
@M.W.Zastrow 4 ай бұрын
To your defense, it was a much more interesting video then using a cardboard, every one can do that😉
@fearbot69
@fearbot69 4 ай бұрын
Whatever way works is always going to be the right way at the end of the day.
@StezStixMix
@StezStixMix 4 ай бұрын
Very true! I got my video file either way, so I'm happy! 😁
@Enjoymentboy
@Enjoymentboy 4 ай бұрын
Watching you trace the SD card adapter onto the cardboard RIGHT IN THE MIDDLE reminded me of my high school auto-shop teacher who taught us how to cut custom gaskets. If he saw you do that he would smack you upside the head and call you a dummy for not putting one of the flat edges directly up against the flat edge of the card material. I can still hear him berating us saying "Why would you cut four sides when you only have to cut three of them?". Good times. Good times.
@StezStixMix
@StezStixMix 4 ай бұрын
🤣 I knew that would trigger someone! 😁
@Nightenstaff
@Nightenstaff 4 ай бұрын
As someone who works in a print shop, I instantly thought this. One cut, one time, eh, doesn't really matter. But when your day can be filled with cutting and cutting and more cutting, you become hardwired to make as few cuts as possible.
@Okurka.
@Okurka. 4 ай бұрын
@@StezStixMix Should have drawn it at an angle.
@jasonpatterson8091
@jasonpatterson8091 4 ай бұрын
I enjoyed the first video and was impressed that your tangle of tiny wires did the job. I also read the comments. Maybe they got nasty later, but the cardboard comment I saw and that was heavily upvoted (it used the word cardboard about 17 times) made me laugh and I think was intended as more gentle ribbing than any sort of insult. If that was the one that hit a nerve, it's a great example of the loss of context when you're communicating via text alone. Don't let it get you down, friend. :)
@DisectUK
@DisectUK 4 ай бұрын
I think you do a great job in showing different ways to tackle electronics. At the end of the day you got your data off the broken card. I would say your the real winner out of all this 😊
@MrJouji5555
@MrJouji5555 4 ай бұрын
When I saw the original video, my first thought was that you could just open up one of those adapters and solder the contacts to it (not completely replace them). But looking at this video maybe there isn't even enough space for that either! Anyway love ur videos man keep 'em coming!
@tomhekker
@tomhekker 4 ай бұрын
Love your vids Steve. Learning this myself as well, so seeing you learning along the way is a great motivator (and you are funny while doing it, so it’s entertaining as well). Thanks!
@antoinemichels2488
@antoinemichels2488 4 ай бұрын
All three solutions are good, but the way Steve handles the negative critics is brilliant! Nice...
@RiNOFocus
@RiNOFocus 4 ай бұрын
Brother, you're still my current favorite youtuber because you went the hard way and made it more entertaining to watch. At the end of the day, those people who got extremely butt-hurt about the way you fixed it aren't real fans in my book, you still did the job and got it complete. Keep doing everything the way you do it and don't listen to those idiots.
@PaulFisher
@PaulFisher 4 ай бұрын
A semi-permanent solution might be to glue the remaining board to a thin piece of plastic, like a piece of a blister pack or a milk carton. That would be stiffer, more durable, and maybe that little bit thinner that would make it work. You might even be able to use it in your camera and other hardware as-is that way. I’m kind of shocked that the entirety of the electronics are included that tiny area under the contacts. Considering how small μSD cards are, maybe I shouldn’t be, but it comes as a surprise to me!
@brianlamtman7361
@brianlamtman7361 4 ай бұрын
You’re doing a great job… keep up the good work….. I love watching your videos…. Ever since you started your channel…..
@SwapPartLLC
@SwapPartLLC 4 ай бұрын
As for the cardboard, maybe thin plastic would be better. The lid from a butter or cottage cheese container would probably be perfect.
@johnnyc.5979
@johnnyc.5979 4 ай бұрын
Thanks, I learned something valuable. I have a few SD cards that came apart. Now I can get the data off them.
@isitmeoru216
@isitmeoru216 4 ай бұрын
I love your vids, steve! Now i self try fixing my broken stuff and even if i fail, maybe i learned something because of trying
@bristolrovers27
@bristolrovers27 4 ай бұрын
I'd have asked Dave, he clearly knows more than I do on the subject Great channel
@vincesieber8828
@vincesieber8828 4 ай бұрын
I feel like I'm watching arts and crafts time with Steve. But in a good way. 🙂
@eddietowers5595
@eddietowers5595 4 ай бұрын
Quite frankly, I like how the remains actually look rather than th whole SD card. I’d rather make an adapter to the remains of SD cards, when one is full I’d interchange them within this “adapter”.
@maxxaddict
@maxxaddict 4 ай бұрын
I questioned the method while watching the video too, but Steve's whole schtick is that he's learning as he goes and he's winging it. The original solution was overengineered, sure, but it worked. The goal was to get the files. He succeeded and he got to make some bonus content and got engagement out of it. Steve, Good on you for taking the criticism as constructive and trying out the ideas, regardless of the tone of the commenters. Keep it up, love your content.
@mikecrane2782
@mikecrane2782 4 ай бұрын
Some people are mean, don't let their inadequacies eat at you. New to your channel because I saw the original SD card content... take away for me was I never knew the SD card chip was constructed like that. Keep on tinkering and fixing.👍
@SylvesterAshcroft88
@SylvesterAshcroft88 4 ай бұрын
Using cardboard is something i never would have thought of myself, I'm surprised that works, it just goes to show the pins are all you need, and the rest is mainly there to protect the card from wear and tear.
@typxxilps
@typxxilps 4 ай бұрын
3:13 - looks perfect and simple for daily use ! I still wonder that this format still exists after over 25 years I guess since I got one the first time for a Olympus digital camera back then. And have not bought those for over 20 years i guess.
@KORUPTable
@KORUPTable 4 ай бұрын
I wasn't criticizing like some of the others, I just shared my solution to the same problem (also my micro sd to sd adapter fit my card perfectly lol) I love ya Steve thanks for the video
@S-I-T
@S-I-T 4 ай бұрын
Easy to criticise from behind a keyboard. Maybe they should make their OWN awesome channel like Steve's
@NaoPb
@NaoPb 3 ай бұрын
It is fun to learn new things :) I've used cardboard one time to repair a diskette that got disintegrated in the mail. Only to find out the contents had been overwritten at some point. At least I learned how to fix it :)
@JanA-yb8lh
@JanA-yb8lh 4 ай бұрын
Seeing the follow up video made me smile. You get a like and a comment for that 😂
@barshak
@barshak 4 ай бұрын
Great job Steve, thank you for creating wonderful content even with all the negativity out there. I'm one of the many that enjoy your content no matter what you're working on, it's just very uplifting to watch. Have a fantastic day and looking forward to your next project.
@mlonster
@mlonster 4 ай бұрын
..but then we had to miss your epic soldering skills.
@afterthewar54
@afterthewar54 4 ай бұрын
Sure cardboard is easier, but the original solution is a lot cooler, AND you learned more in the process (and so did the viewers).
@SimonLeeds
@SimonLeeds 4 ай бұрын
Your Amazon list needed updating. Stick a 3d printer on there instead.
@ianortiz3133
@ianortiz3133 4 ай бұрын
Screw them haters, Steve. You do you, I love your channel. All the struggles and creativity are some of the best parts of your content. Keep up the great work man. Cheers 🍻
@kirtose
@kirtose 4 ай бұрын
keep doing you man. you do a great job.
@rychu_Plays
@rychu_Plays 4 ай бұрын
I think you did amazing and it was so cool how you got it to work!
@C5films
@C5films 4 ай бұрын
Dude.......carry on inspiring and entertaining. Ignore the haters. Sadly, the internet gives a voice to many who shouldn't have one.
@mikebowers7161
@mikebowers7161 4 ай бұрын
Yeah but… your Heath Robinson approach looked great fun. I would choose your way because it was miles more interesting
@rugby1687
@rugby1687 4 ай бұрын
I’d like to see you trying to solder some wires from the micro SD adapter pins to the broken SD card pins.
@imaginitivity7853
@imaginitivity7853 4 ай бұрын
To a hammer, everything looks like a nail. Soldering Steve's gonna solder...
@pixelpuppy
@pixelpuppy 4 ай бұрын
More content from Steve is always good!
@petereastwood1
@petereastwood1 4 ай бұрын
Fair play for accepting the challenge, but I enjoyed the original video more anyway. Wires everywhere, soldering... like fixing Arnie up.
@steelcityreseller8170
@steelcityreseller8170 4 ай бұрын
Very nice! I'll have to remember this if my SD card gets crunched. Which I'm surprised hasn't happened yet.
@opticienopdekoffie
@opticienopdekoffie 4 ай бұрын
I always like your content. Thanks
@joeman5490
@joeman5490 4 ай бұрын
If it works, is it really a bad idea? Personally i would have went for the iron first as well. Makes it more fun, plus you can get more soldering time in, which will increase your skill level. Great job Steve! All your videos are very entertaining, helps a fellow like myself learn and try things with the ol' iron.
@psdaengr6155
@psdaengr6155 4 ай бұрын
I like to see people trying things that they haven't done before to see if it will work. If they learn anything then it's not a failure. That's the basis of engineering progress (science usually follows engineering, not vice versa.) imo The cardboard shim was the better of those solutions. There are thinner common materials than the cardboard used that might work better - photo print paper, some plastic wallet ID cards, index card stock, and clear plastic anti-theft packaging come to mind.
@harryandy44
@harryandy44 4 ай бұрын
I preferred the original fix, sure it's alot more hassle but i enjoyed it regardless of the simpler fix's. Thanks for the video.
@SwapPartLLC
@SwapPartLLC 4 ай бұрын
If this was something I did all the time, I would make a test clip with pogo pins, or maybe just modify a card reader.
@logothaironsides2942
@logothaironsides2942 4 ай бұрын
There isnt a right way because everybody is doing what works for them. Maybe there is a best way but who cares, providing the way they use, works.
@OriginalMorningStar
@OriginalMorningStar 4 ай бұрын
Hack hack hackety hack 😄 Spike Milligan once said [of 'cardboard']: String is a wonderful thing, rope is thicker but string is quicker.
@andrewduff3452
@andrewduff3452 4 ай бұрын
We all default to our comfort zone. I would have gone cardboard as my soldering is "not solid".
@wallysprint
@wallysprint 4 ай бұрын
don't criticize Steve, he is a proper gentleman, and above all, he is winging it most of the times and getting things done.. XD
@GameRaveTV
@GameRaveTV 4 ай бұрын
NOBODY YELLS AT STEVE. You hear me?
@fixins
@fixins 4 ай бұрын
I'll bet you a cup of tea someone has a 3D printable solution to this.
@MichaelHunt185
@MichaelHunt185 4 ай бұрын
the one comment saying "everything looks like a nail when you're a hammer" made lol
@orange11squares
@orange11squares 4 ай бұрын
another method is to have an SD card reader with the socket metalic cover removed and you just press from above your card. An instant operation.
@VVerVVurm
@VVerVVurm 4 ай бұрын
If the thickness of cardboard+hotglue+SD is too much for the reader I would have trimmed the cardboard and used scotch tape to glue it edge to edge to the cardboard
@yummyklown9226
@yummyklown9226 4 ай бұрын
I wouldn't listen to the Captain Hindsight's. Do you, forget the keyboard "professionals".
@SovietCaptain03
@SovietCaptain03 4 ай бұрын
The micro sd to sd adapter has the pads seperate from each one of them with a gap, that’s where the plastic housing goes in between.
@chriskaprys
@chriskaprys 4 ай бұрын
I think the methods from both vids are pretty darned impressive. Plus next time you need to solder finicky lil wires in an awkward spot, now you've got more practice in the can. Either way it's chicken dinner! 🏆
@kurtadkins880
@kurtadkins880 4 ай бұрын
As a pro photographer I learned a long time ago not to use full size SD cards at all and just use micro-SD cards in a full-size adapter. I learned that lesson after having a full SD card break on me. I lost the data, however if it's used an adapter all I would have had to do was change it from the drawer full of unused adapters I had. 🤔
@pedromimoso8804
@pedromimoso8804 4 ай бұрын
Well done, Steve! ✨👍
@ThomasToSpace
@ThomasToSpace 4 ай бұрын
I usually dont comment, but I always appreciate your videos. Sorry to hear some people were rude, I hope those have been banished to the 'Hide this users comments' realm. Keep up the amazing videos ❤
@Gustavofeanor
@Gustavofeanor 4 ай бұрын
We love Steve. Not so much his nails though
@JustMatt87
@JustMatt87 4 ай бұрын
I got you stez.... Stupid SD card thing
@ParaSytius
@ParaSytius 4 ай бұрын
Problem with the cardboard/sd converter solution is that it just wasn't as much fun to watch as the soldering video being done was. Why take the boring and obvious route when there are more interesting and complicated ways of doing things. Granted, the cardboard option works for people like myself who don't have any kit for soldering but then, I watch these videos for the entertainment factor rather then any plans to fix anything.
@degtyarev708
@degtyarev708 4 ай бұрын
I imagine some stiff paper, like card stock or maybe photo paper, would make for an even better method. Just a smidge thinner. But I suppose the cardboard works just as well, especially now that the card reader is already bent out lol.
@philchurch927
@philchurch927 3 ай бұрын
Vote REFORM - To keep our way of life.
@Vexcenot
@Vexcenot 4 ай бұрын
in all fairness some of us just really wants an excuse to solder
@pseudonym3690
@pseudonym3690 4 ай бұрын
Clever ideas.
@Yet_Another_Steve
@Yet_Another_Steve 4 ай бұрын
First attempt was too floppy to go in, second attempt was too thick for a comfortable fit. Life's little problems.
@superamario6464
@superamario6464 4 ай бұрын
Nice one Steve!
@Kikay0n
@Kikay0n 4 ай бұрын
Haters just gonna hate man you rock! Don’t let the man get you down!
@andymerrett
@andymerrett 4 ай бұрын
My idea of a mod is using an AAA battery with scrunched up tin foil when I've run out of AA batteries, so really, the naysayers can just go do one!
@t1d100
@t1d100 4 ай бұрын
Please do not let the nay sayers get you down. They just need to learn how to speak with kindness. Bottom line, you got the job done. Bravo!
@zach123101
@zach123101 4 ай бұрын
Don't mess with my boy Steve
@xuniwor
@xuniwor 4 ай бұрын
I would've probably 3d printed a new sd card model with a proper cutout for the 'pcb'. I think it would almost function as well as the original card
@markc1793
@markc1793 4 ай бұрын
The fact you had to faff around with both of these to get them to work, just shows that the majority of the clever clogs in the last video obviously never actually did this themselves! Honestly, i wouldn't have thought of these ways either and would've done as you did in the first vid, but appreciate you showing us these alternatives.
@Okurka.
@Okurka. 4 ай бұрын
You don't have to do something yourself to know what's easier.
Amazon... more like SCAMazon - Fake SSDs
19:06
Linus Tech Tips
Рет қаралды 4,7 МЛН
bargain hunting on eBay | how I search for stuff
14:12
StezStix Mix
Рет қаралды 58 М.
Get 10 Mega Boxes OR 60 Starr Drops!!
01:39
Brawl Stars
Рет қаралды 14 МЛН
Look at two different videos 😁 @karina-kola
00:11
Andrey Grechka
Рет қаралды 13 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 37 МЛН
لااا! هذه البرتقالة مزعجة جدًا #قصير
00:15
One More Arabic
Рет қаралды 51 МЛН
Scammers PANIC After I Hack Their Live CCTV Cameras!
23:20
NanoBaiter
Рет қаралды 9 МЛН
How waterproofing works (and fails)
15:33
TechAltar
Рет қаралды 118 М.
Storage Media Life Expectancy: SSDs, HDDs & More!
18:18
ExplainingComputers
Рет қаралды 391 М.
My Nvidia SHIELD Remote Stopped Working | Won't Pair | Not Fair
17:08
Paying for Cloud Storage is Stupid
11:55
Linus Tech Tips
Рет қаралды 2,8 МЛН
Confusing Symbols on SD Cards
5:20
Techquickie
Рет қаралды 506 М.
The ULTIMATE Raspberry Pi 5 NAS
32:14
Jeff Geerling
Рет қаралды 1,8 МЛН
How bad is this $20 SSD??
13:27
Linus Tech Tips
Рет қаралды 4,1 МЛН
Get 10 Mega Boxes OR 60 Starr Drops!!
01:39
Brawl Stars
Рет қаралды 14 МЛН