Digging that red 3 hunnit in the background. Cool vid as always
@Bkirkk3 ай бұрын
🔥 video as always!
@brook59573 ай бұрын
Nice vid 👍🏻
@jonmaher86993 ай бұрын
Lots of bikes have a "remote" idle speed adjustment via a small short flexible cable with a thumb screw at the end. If you ran a much longer one and mounted it to the dash, you would have your waterproof idle speed adjustment.
@dxsplay3 ай бұрын
how big of tires your going on this 1
@courtneymcghee093 ай бұрын
Still making the rear arch arms for Honda rubicon ??
@FergusonBoatworks3 ай бұрын
I wonder if you could do a switch to a pwm signal generator and use it to hold the Iac where you want the high idle. Kinda alot of stuff to wire and keep waterproof would be the down side.
@MudPuppyOffroad3 ай бұрын
That's exactly where my head's at. I know I can make it work but could I make it waterproof LOL
@mattaltman63443 ай бұрын
Hey man I still have that 60 percent reduction I told you about if your still interested I’m going to holowpaw this Saturday
@mattaltman63443 ай бұрын
Still in box with heavy springs and paper work
@slow_polarisАй бұрын
with the 1000 air box gasket do you still need gress?
@MudPuppyOffroadАй бұрын
I don't use any grease. I did put some ultra Black where the brake in the gasket is
@slow_polarisАй бұрын
@@MudPuppyOffroad thanks man appreciate im gonna to try it on a 450 foreman
@jeremijr2 ай бұрын
What model and year talon for the airbox seal? About to head up to powersports now..
@MudPuppyOffroad2 ай бұрын
Theyre all the same, try 2019
@jeremijr2 ай бұрын
@@MudPuppyOffroad is the p1000 lid seal the same exact material
@MudPuppyOffroad2 ай бұрын
@@jeremijr I think so. I've used those too
@itsgatlin40353 ай бұрын
What gear reduction do you recommend for 28" azteks on a 300? i can already almost turn these tires, i havent really had an issue yet with not being able to turn them, but i havent had it in anything like peanut butter mud yet, i did your gear reduction calc but im thinking 40 might be a bit much because i can already turn them decent, my main problem is when its dry out my 300 over heats trying to turn them in deep sugar sand all day, any tips? hoping a gear reduction might help with the over heating because it would be easier for the motor to turn them
@MudPuppyOffroad3 ай бұрын
A 40 is about as small as I ever go on a 300, they need all the gear they can get LOL. Yes you might be able to get away with a smaller reduction but there's going to be plenty of times you wish you had done the 40 at least. I honestly only install '60s because people always want to go bigger
@itsgatlin40353 ай бұрын
@@MudPuppyOffroad so a 40 would be good? My main concern would be if it would help with overheating or if i would be better off investing my money into an oil cooler, either home made or a kit
@itsgatlin40353 ай бұрын
@@MudPuppyOffroad i just was thinking if the gear reduction might help my overheating issue because because it wouldn’t be so hard on it turning the 28s in deep sugar sand, being able to sling them in thick mud would just be a big bonus to that
@MudPuppyOffroad3 ай бұрын
@@itsgatlin4035 I mean, unless you're having to drive around in first gear, no it's not going to help that issue
@itsgatlin40353 ай бұрын
@@MudPuppyOffroad if i keep it in 2nd then it helps a lot but if i put it in 3rd it struggles and overheats
@Hondatwan3 ай бұрын
Would adjusting the idle work on a rubicon 500?
@justin_steen3 ай бұрын
Yes
@MudPuppyOffroad3 ай бұрын
Yes, it should help. It's just not as easy to adjust as the Pioneer 500. I'll make a video on that.
@justin_steen3 ай бұрын
You can only adjust by the thumb throttle or drill a small hole in the butterfly
@MudPuppyOffroad3 ай бұрын
@@justin_steen adjusting the thumb throttle tight is 1000% a bad idea and is dangerous. Drilling. A small hole works but I'm trying to find a more elegant method
@justin_steen3 ай бұрын
@@MudPuppyOffroad yes!!! definitely I’m sorry I forgot to add that you HAVE TO HAVE a clutch kit with a higher stall for that to work and not run you into a tree
@NCMATT3 ай бұрын
Hey buddy
@MudPuppyOffroad3 ай бұрын
Hi
@kyleprichard98723 ай бұрын
I feel like your way of cleaning a bike it’s not washing with a pressure washer but just taking them to a creek or whatever you would call what you were in