Multi Axis Wood Turning - The Emerging Ball

Рет қаралды 24,544

2 ай бұрын

Hello folks! In this video I will be experimenting to make an emerging ball piece. This is something I have wanted to try for a while but never gotten round to it.
Starting with a blank approximately 20mm square by about 150mm long, mounted off centre to create the first hemisphere. The blank was then rotated by 90 degrees along its length to create the second hemisphere matching up with the sides of the first.
The results look like a ball emerging from a straight sided square piece of wood.
This was all done by eye so there was a lot of fettling and minor adjustment of the blank in the jaws during the process. A decent share of off camera sanding was done too.
Watch this space as my next one of this type, the ball itself will also be a hollow from! Also I will most likely make a half and quarter circle template to make sure it will be a perfect ball shape.
Thanks for watching! Please feel free to leave a comment on what you liked or disliked. If you enjoyed this, please consider subscribing to the channel. It's completely free and helps a lot! Hopefully see you all again soon! Thank you for your support.
Follow me on the socials:
tfturning
tfturning/
My pieces are often for sale on Etsy:
www.etsy.com/uk/shop/tfturning
If you would like to purchase something that isn't on Etsy please feel free to send an email to: tfturning@gmail.com
Alternatively, if you want to directly support the channel, you can here: paypal.me/tfturning
No amount is too small and this money will always go towards the purchase of tools and materials for more turning content.
#tfturning #Woodturning #Woodworking
00:00 - Intro
00:12 - Sycamore Maple - Mounting to lathe and getting set up
00:52 - Marking the centres and outline for sphere
01:21 - Removing material from the edge
02:23 - Marking and shaping the hemisphere
03:34 - Rotating blank to shape the second side
03:54 - Removing material from position 2
05:24 - Shaping second hemisphere
07:17 - Sanding and first look
07:47 - Close-ups
08:08 - Thanks for watching!
*These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk, my practices may not always be correct or the safest. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment!

Пікірлер: 46

@mpart_woodlathe-stuff 2 ай бұрын

Ok, that's impressive ... let us know when you've built a dodecahedron with each leg having an emerging ball ! Way to go Tim ! Take care. -Mike

@tfturning 2 ай бұрын

Cheers Mike!! That's definitely a project for the future 😂😂 Thanks for watching buddy, take care.

@mpart_woodlathe-stuff 2 ай бұрын

@@tfturning 👍😎

@WoodenItBeNice 2 ай бұрын

I've just watched all of this and still have no idea how you managed this. Superb piece of turning Tim. Take care mate. Cheers, Huw

@tfturning 2 ай бұрын

Thank you Huw, this was one of those 'don't blink or even breathe' kind of projects 😂 Cheers mate!!

@denisvienat849 2 ай бұрын

Salut Tim tu as beaucoup de patience et de la précision bravo 👍👏👋

@tfturning 2 ай бұрын

Thanks for watching and the kind words, Denis! 😁

@kinggimped 2 ай бұрын

Wow man, that's pretty impressive work! Nice job. How about a balloon knot next?

@tfturning 2 ай бұрын

Cheers buddy and a great suggestion!! #cigarcutter 😂

@pmwoodstudio 2 ай бұрын

Really nice quick project!!!

@tfturning 2 ай бұрын

Thank you sir!

@crocuscreekwoodworks 2 ай бұрын

That was really cool to watch! Nice job.

@tfturning 2 ай бұрын

Thanks Terry, glad you liked it! 😁

2 ай бұрын

A different and interesting design. Congratulations

@tfturning 2 ай бұрын

Thank you Mehmet! 😁

@oneturnatatime6309 2 ай бұрын

Very neat my friend 😊

@tfturning 2 ай бұрын

Thanks Jojo, much appreciated 😁

@mashmade-airth 2 ай бұрын

That's pretty cool Tim. I'd find it scary & knuckle bursting to try but I might put my big boy pants on & have a go......... possibly ! 😊

@tfturning 2 ай бұрын

Thank you so much! To be fair, it doesn't have to overhang at all so it could definitely be done with a lot less madness flailing around. I didn't know where I was going with this at the start so left it on there just in case. The added danger is kinda exciting too 😂

@TheGrantAlexander 2 ай бұрын

That is cool!

@tfturning 2 ай бұрын

Thanks Grant!

@MikeHolton 2 ай бұрын

Wonderfully technical bit of turning Tim, I don't think I could have done it without loosing my knuckles lol

@tfturning 2 ай бұрын

I thought about this after Mark mentioned but it didn't actually need to stick out of the chuck at all really, adds to the excitement though ay 😂 Thanks for stopping by Mike!!

@MikeHolton 2 ай бұрын

@@tfturning Always a pleasure my friend, you have such a beautiful turning style!

@DougMilleratWoodSpunRound 2 ай бұрын

Fun stuff

@tfturning 2 ай бұрын

Cheers Doug!

@jakegevorgian 2 ай бұрын

Tasteful form❤

@tfturning 2 ай бұрын

Thank you so much! 😁

@user-tw9bh8kz4b 2 ай бұрын

90 процентов травм, начинаются после слов, смотри как я могу! 🤣👍

@tfturning 2 ай бұрын

This is very true 😂😂

@robertcornelius3514 2 ай бұрын

This is Black Magic.

@tfturning 2 ай бұрын

Quite possibly, yeah 😂

@johnkemas7344 2 ай бұрын

Nice job!! What do you actually use this for??

@tfturning 2 ай бұрын

Thank you so much! There is no purpose beyond being a cool thing to hold. Also with it being an odd shape it doesn't look like something that could be made using a lathe. Makes people question how it's possible, especially wood turners. 😁

@BensGotWood 2 ай бұрын

Nice one Tim. How did you even think to do that? 🤯

@tfturning 2 ай бұрын

Thanks Ben! I actually saw one but on a bigger scale which needed all kinds of jigs to hold the wood, probably the reason I put it off for so long. Didn't realize it could be done with what I had. Cheers mate!

@MarkMcCluney 2 ай бұрын

In. Credible. That had me guessing the whole way. And that was a long time to hold my breath. But why the assymetric length of wood? Am I i missing something obvious? (Feel free to enter your own joke there.) Thanks Tim, fascinating, informative and enjoyable as always.

@tfturning 2 ай бұрын

Thanks Mark!! The length of wood was because after the initial part was made and the piece rotated, it's then only held in the jaws on one side by the part I didn't touch. Realistically, I probably could/should have cut the full length down to just clear the chuck but what can I say, this way is definitely more exciting 😂 Cheers mate!