Multi Impact Driver Drill/Driver Restoration | National / Panasonic EZ6507 12V 1/4”

Рет қаралды 99,947

8 ай бұрын

National/Panasonic Multi Impact Driver 12 Volt
1/4” Hex Impact Driver or 1/4” Hex Drill/Driver
Made In Japan
Model # EZ6507 or EY6507
Extremely Rare!! Labels are all in Japanese
Features:
Tough, impact resistant housing
Powered by National/Panasonic's 12V "system" of battery packs
National/Panasonic built high performance motor with fan cooling delivers
maximum power and durability
Steel-planet transmission provide job site durability
Variable speed, Reversing, Electronic Brake
Feed-back circuit delivers maximum torque at all speeds
21-stage clutch for more precise torque setting plus Drill Mode
Specifications:
Chuck Type: Keyless Quick Bit Change 1/4" Hex
RPM Drill Mode: 0-650
RPM Impact Mode: 0-2,200
No-Load BPM 3,300
Clutch Torque 9 - 50 in-lbs (approx) 18 stages. 2.4 in-lbs per stage
Max Torque:
Drill Mode: 286 in-lbs.
Impact Mode: 1,100 in-lbs.
Capacity in Steel: 1/2"
Capacity in Wood: 1/2"
I bought this tool from Japan recycle shop only $15. It doesn't work anymore because the permanent magnet move and the battery is also dead.
I restore this tool by disassemble, clean every part, and rebuild new battery replacing NiMH by Li-ion battery cell.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show

Пікірлер: 137

@kilastrika 7 ай бұрын

that tiny pin holds the entire drill together!

@achmadmunif 8 ай бұрын

vintage restoration never fails to impress, top work !!!👋👋👋

@gear_show 8 ай бұрын

Thank you very much!

@vinceianni4026 8 ай бұрын

Good job mister beautiful restoration beautifully restored well done

@gear_show 8 ай бұрын

Thank you! I'm glad you like this restoration.

@xtender5 8 ай бұрын

The ultrasonic cleaner seems to have worked really well this time!

@gear_show 8 ай бұрын

Yes, It is. Thank you!

@marianpintilie7799 8 ай бұрын

The grand master always do great job and never dissapoints anyone🇷🇴🇷🇴

@gear_show 8 ай бұрын

I'm glad you like this video, thank you!

@mishkomirceski3493 8 ай бұрын

I love your work. dedication and time you put into making things perfect. I love vintage restorations.. especially when you restore flashlights. Keep up with an awesome work dude.

@MonkeyOk-bh4hs 8 ай бұрын

Love your content , very satisfying to watch.

@gear_show 8 ай бұрын

I'm glad you enjoyed it, thank you!

@MASI_forging 8 ай бұрын

Beautiful restoration 😃😃

@brianwood5220 8 ай бұрын

Great job once again.

@gear_show 8 ай бұрын

Thank you so much!

@user-kt2hb8xr3p 8 ай бұрын

thank you teacher❤❤❤ Great job, thank you brother. You are so talented

@gear_show 8 ай бұрын

You're welcome, thank you!

@nathkrupa3463 8 ай бұрын

Nice job sir 👏 Great restoration 😊

@gear_show 8 ай бұрын

Thank you kindly

@Gary.Poltava 8 ай бұрын

Congratulations, great job.

@gear_show 8 ай бұрын

Thank you so much!

@johnbradford9235 8 ай бұрын

Another top job dude 👏👏👏. And looking at the corners of the screen, seems like your ever-reliable little cordless screwdriver is due for a bit of a clean-up 😁. 😎

@gear_show 8 ай бұрын

You are correct, thank you!

@Mustafa.B 8 ай бұрын

Nice work .

@gear_show 8 ай бұрын

Thank you!

@TEMHblU_PblUAPb 2 ай бұрын

Good job! 😉👍🏻

@gear_show 2 ай бұрын

Thank you! Cheers!

@alexandres8846 8 ай бұрын

Four poles in dc motor and very powerfull. very rare in the old cordless tools!

@gear_show 8 ай бұрын

Yes, that is right. Thanks

@larrykelly2838 8 ай бұрын

Nice restoration and conversion

@user-bz3bo9ye8y 8 ай бұрын

He is from which country?

@user-bz3bo9ye8y 8 ай бұрын

2800 view ,why only 366 like?😮

@johnriddel6671 8 ай бұрын

Good Friend ...Thank you my friend for the video ...my Grearting from iraq to you ❤❤

@gear_show 8 ай бұрын

Thank you, my friend, I'm so glad you like this video.

@johnriddel6671 8 ай бұрын

@@gear_showThank you my friend . Continued ....

@nikolaos9906 8 ай бұрын

Perfect Work Congratulation

@gear_show 8 ай бұрын

Thank you!

@UlissesdeSouzaPereira 8 ай бұрын

YOU IS MASTER, CONGRATULATION....

@gear_show 8 ай бұрын

THANK YOU SIR!

@meninoandrade9833 8 ай бұрын

Too good restoration

@gear_show 8 ай бұрын

Many thanks!

@Ghost-fc3kc 7 ай бұрын

I always put a like before watching

@memutu 8 ай бұрын

Nice work! Quite complex the gearbox and somehow strange...

@gear_show 8 ай бұрын

Yes, It is a bit complex and it was designed logically.

@Benjamin.L.Clement 8 ай бұрын

You have great content! Have you considered making a printer run off of a Milwaukee battery pack? Job site printer would be handy.

@Hang_bai_Can_Tho_65 8 ай бұрын

Máy nhỏ mà khỏe thật, đúng là hàng Nhật 👍

@gear_show 8 ай бұрын

Đúng vậy, bạn thực sư đúng.

@YenNguyen-is7ky 8 ай бұрын

perfect

@gear_show 8 ай бұрын

Thanks

@davidepiccini9254 8 ай бұрын

Wow

@kahlid-ataya 8 ай бұрын

like before watching 😁

@gear_show 8 ай бұрын

Thank you!

@lecafoutchdenico9950 8 ай бұрын

Very nice restoration. What type of grease do you use ? Do you use different grease if it's for plastic gears or metal gears ? Have you a favorite brand? Thanks a lot !!

@kadirince 8 ай бұрын

Güzel başarılı bir çalışma olmuş.

@gear_show 8 ай бұрын

Teşekkür ederim, bu çalışmayı beğendiğinize sevindim.

@449shivakeshavamachani6 8 ай бұрын

This rc drill machine also good one to give away to your subscribers sir😊😊😊

@gear_show 8 ай бұрын

That is a good suggestion, I will think about it, thank you!

@jailsondasilva223 8 ай бұрын

Driver multi impacto 😉

@gear_show 8 ай бұрын

Yes, it is.

@triceratops1988 6 ай бұрын

great work as always! only one question: where do you get all therse interesting models of instruments? you buy it on a flea market or you've clients who bring you all these things?)

@reginaldbowls7180 5 ай бұрын

He lives in Japan.

@Tatal.b 8 ай бұрын

👍👏 P A R A B É N S 👍👏👏👏👏

@abed6127 8 ай бұрын

I would love to see your videos❤

@gear_show 8 ай бұрын

Thank you for alway support my works.

@user-xs3qb2tp8i 8 ай бұрын

ラジオペンチがフジヤなのが好き。

@x84pav84x 8 ай бұрын

С настолько сложной отвёрткой никогда не сталкивался.

@liftrucs 8 ай бұрын

Lovely job well done, does the impact bit have a magnet on the end??

@gear_show 8 ай бұрын

Thank you! Yes, that bit has a magnet on the end.

@liftrucs 8 ай бұрын

@@gear_show Thank You

@JoJoTavern 8 ай бұрын

Rare impacts

@gear_show 8 ай бұрын

Yes, it is.

@darkside59 8 ай бұрын

I went through 2 Milwaukee 1/4" brushless non fuel impact wrench. 1st one, motor seized on me. My employer replace it. Within a month of use, it seized again. Went and bought the fuel version and took my broken one to an authorized repair center to have it warrenty repaired.

@RegiPavan 6 ай бұрын

😎😎👍👍

@user-xv8re2eh1s 8 ай бұрын

Great content, thanks) Can you tell me what kind of white powder you use to clean plastic?

@reginaldbowls7180 5 ай бұрын

It’s baking soda

@user-xv8re2eh1s 5 ай бұрын

@@reginaldbowls7180 That's what I thought.. thanks

@Saber_Matrix 8 ай бұрын

👍💯

@gear_show 8 ай бұрын

Thanks

@yufadanpratama4011 8 ай бұрын

MBK modifl Chuck universal menjadi Chuck wrich drill donk bang

@gear_show 8 ай бұрын

Ya, Anda benar, terima kasih atas tipnya.

@taunteratwill1787 2 ай бұрын

You had to redo that last label . . . . . right? 😋

@user-dc5di9qj4u 8 ай бұрын

ดี

@marjukii-ze5vw 8 ай бұрын

Indonesia nyimak ....

@gear_show 8 ай бұрын

Thanks

@juarezborges7434 8 ай бұрын

🇧🇷👏🏽👏🏽

@gear_show 8 ай бұрын

Thanks

@B4uneed 8 ай бұрын

HEY THERE SIR! Please stop using chemicals this way, when you breathe them in and they touch your skin, and basically it happens all the time. I've seen you solder wires, for example, you make sure there's a device that pulls the air out of you, but just as important, it's important that the chemicals don't reach you, it narrows a lot of serious diseases. Beyond that Thank you so much for sharing, your videos are great!

@gear_show 8 ай бұрын

You're welcome! I do appreciation with your advice, I will think about this.

@user-ip6nw6ws7i 8 ай бұрын

шикарный аппарат,кострукция изумительная

@gear_show 8 ай бұрын

Да, это японский продукт.

@Varmadheeraj6 8 ай бұрын

Why don't you use your 3d printer for new modify plastic body cover

@AntiIlluminati_GR 8 ай бұрын

Why you choose not to repaint the plastics but just give them a clear laquer? Excellent work!!

@gear_show 8 ай бұрын

New paint on plastic is not to last long.

@AntiIlluminati_GR 8 ай бұрын

@@gear_show I disagree. You can use a first hand primer and a second hand acrylic and the clear laquer at last. Then, the tool will look like a new one.

@sergueiothonucci1638 8 ай бұрын

😃

@minions4108 8 ай бұрын

hi i need to ask about 12v impact drill upto 4S1P (16.8v) or 3S2P (12.6V) where is the way of perfect performance ?

@gear_show 8 ай бұрын

3S2P (12.6V) is the good choice.

@lightbatmen 8 ай бұрын

9:04 Ох ты. Велики ещё чинишь?

@gear_show 8 ай бұрын

Да, я ремонтировал свои велосипеды, заменяя подшипники.

@ЖелезнаяЖизнь 8 ай бұрын

А отвёртка та что ты постоянно работаешь, она ударная или просто с трещёткой?

@gear_show 8 ай бұрын

Отвертка, которую я всегда использую, это ударная отвертка Makita 7,2 В.

@ЖелезнаяЖизнь 8 ай бұрын

@@gear_show 👍🤝

@user-zx5ol4yg7i 8 ай бұрын

내 최고 수면제..

@gear_show 8 ай бұрын

도움이 되셨다니 기뻐요, 감사합니다!

@MrMahmood74 5 ай бұрын

I own like this ☝🏿 and I have replaced batteries to lithium

@gear_show 5 ай бұрын

So nice you have this model too

@lightbatmen 8 ай бұрын

7:56 Ммм... Цианокрилат и пальцы...

@gear_show 8 ай бұрын

Этот клей безопасен для пальцев.

@lightbatmen 8 ай бұрын

@@gear_show м, тогда ладно.

@anatolvinogradov6615 8 ай бұрын

Покажите, как Вы делайте наклейки? Show me how you make stickers?

@gear_show 8 ай бұрын

I make it with adobe photoshop.

@repair_and_restoration 8 ай бұрын

Nice machine but it's lost speed control.

@gear_show 8 ай бұрын

Why you know a bout that?

@repair_and_restoration 8 ай бұрын

@@gear_show i see that when you make triger swicht.

@robertobezerra8376 6 ай бұрын

👏👏👏👏👏👏💯💯💯💯💯💯👍👌🇧🇷🇧🇷

@mazharabbasi1574 8 ай бұрын

#gearshow hello dear,! please you Convert the juicer machine to 220 volts to 12 volts .

@gear_show 8 ай бұрын

That fantastic idea, thank you so much!

@mazharabbasi1574 8 ай бұрын

@@gear_show welcome 🤗

@TheOlympisch 8 ай бұрын

так себе решение не заменить обезмасляные в солярке подшипники ))))

@dennywildann2170 8 ай бұрын

for sale? I need to buy

@gear_show 8 ай бұрын

Just for sharing video with fan.

@Lil_bled 8 ай бұрын

Было бы ещё ипоксидка я думаю ты бы лучше оригинала сделал

@gear_show 8 ай бұрын

Спасибо за идею.

@RobinYee-xc9vf 8 ай бұрын

Too plenty of used , out of service, old , vintages of cordless powertools , do had ban in the bins...( I know, because, ....many users, said so ...

@gear_show 8 ай бұрын

Thanks for sharing !

@dragonubtalovic6210 8 ай бұрын

Science-fiction

@harkbelial 8 ай бұрын

That's one dry gearbox.

@hot-top-top 8 ай бұрын

Слабый ПЗДЦ ( но может мощный?

@moises7877 6 ай бұрын

It power tool

@Stephan312 8 ай бұрын

the 421. Impact Drill or Wrench Restoration :/

@gear_show 8 ай бұрын

Yes, thank you!

@user-mk4li5yi7n 8 ай бұрын

Уке сенин кылган иштерин жагат,ар бир ишти кылдат талдап жургузосун

@gear_show 8 ай бұрын

Сизге чоң рахмат!

@user-sl8cc5df6j 8 ай бұрын

Э Н ИНН

@nelchan2421 8 ай бұрын

@gear_show 8 ай бұрын

Thanks