Multi Winding Transformer Ratings and Connections

No video

Multi Winding Transformer Ratings and Connections

Рет қаралды 12,186

3 жыл бұрын

This video covers basic connections and rating of multi-windings transformers
For more Transformer Videos check out: • 1-Phase Transformers
#Transformer #Multi #Winding

Пікірлер: 10

@pablocalles9304 Жыл бұрын

excelent explanation , without any complications.

@mattharvey8712 5 ай бұрын

Bravo........u should be more famous.........great job...........using a auto transformer configuration ......does the split phase 240v or 2 chanels of 120v are in phase with each other.........I need one phase 180 degree out from other phase.......like u.s. grid power system ...... cheers

@iosefoyagomate5647 3 жыл бұрын

Thank you Zack...well explained

@ZackHartle 3 жыл бұрын

Glad it was helpful!

@iosefoyagomate5647 3 жыл бұрын

@@ZackHartle Oh yes you bet..Keep them coming...Can you give a presentation on transformer grouding primary and secondary single and three phases please

@LouisNhlanhlaKunene-yu1ud Жыл бұрын

a1 a2 A3 and a4 on the secondary terminals or bushing , which terminal is neutral and which ones are hot

@aheropcs2009 9 ай бұрын

Question: I am receiving a transformer 3P with 2 secundaries 12.47 Primary and 480/277 and 415/240, my location needs both and I design this to fullfill the requierement, now the company said it is one primary or the other, if part of my location is using 480 including panels and transformers to reduce to 240/120, is possible to connect my 480 transformers primary with 415 V and expect to keep going working in the same way. Please advise, thanks for your help

@keep_proud Жыл бұрын

شرح رائع

@insylem Жыл бұрын

Question: Why are the H2 and H3 lines drawn crossed? Why are the X2 and X3 lines drawn crossed? I see that on the ones at work all the time too. Also, if you power only ONE H1 and H2 with 240VAC, could you use H3 and H4 to get 240 VAC? But at 2.08 Amps? If X1 and X2 are powered by 120VAC, can you use X3 and X4 for 120 VAC as well as the H windings ?

@wolfvash22 Жыл бұрын

Regarding why terminals are shown crossed, it has to be with how they are disposed for physical connection, just like how the terminal box is disposed in motors. This is a guess though, cause I have worked with motors but not with transformers. Now, regarding what you said about just using a half winding as a primary, you got it right, according to theory, you could even use only one winding as a primary with three secondaries available, and as long as you stay withing the power rating, it should work without a problem. Just for clarification, I am referring just to the theory behind transformers, could it be that a real world design doesn't allow to do such a use, due to other kind of constrains.