muOS Complete Setup Guide (ROMs, BIOS, Box Art, Tweaks) - BEST CFW for the RG35XX Series!
Рет қаралды 42,565
Күн бұрынIn this video, we're going to be installing muOS on the Anbernic RG35XX Plus, H and 2024 models.
Buy the Anbernic RG35XX Plus here: joeysrh.link/ANB_RG35XXPLUS
Buy the Anbernic RG35XX H here: joeysrh.link/ANB_RG35XXH
Buy the Anbernic RG35XX 2024 here: joeysrh.link/ANB_RG35XX2024
Buy the 128GB SD card here: joeysrh.link/AMZN_128GBSD
Buy the 256GB SD card here: joeysrh.link/AMZN_256GBSD
Buy the SD card reader here: joeysrh.link/AMZN_SDREADER
muOS: muos.dev/release/plush (use Jdownloader if slow)
muOS Discord: / discord
Antikk Github: github.com/antiKk/muOS-Artwork
ROMs & BIOS: • Retro Game ROMs & BIOS...
-----------------------------------------------------------
Support Me:
Recommended Handhelds/Accessories/Stores:
Linktree - joeysrh.link/Linktree
Website - joeysrh.link/website
Patreon - joeysrh.link/Patreon
Ko-Fi - joeysrh.link/Kofi
Subscribe - joeysrh.link/YT
Discord - joeysrh.link/Discord
Merch - www.underarmour.com
Music - www.canva.com/p/gravitasign/, www.epidemicsound.com/track/t....
Background - Free Stock Footage by Vecteezy.com
Note: Some of my links may be affiliate links, which could earn me a small commission if you purchase through it, at no extra cost to you.
-----------------------------------------------------------
Timestamps
00:00 - What is this?
02:36 - Install muOS
04:11 - Adding ROMs & BIOS
06:03 - Adding Box Art
12:00 - muOS Tour
14:05 - Theme Picker
15:17 - muOS Tour Continued
15:55 - RetroArch Settings
17:59 - Removing Overlays & Shaders
19:02 - GB Colors
19:24 - Setting Cores for Systems
@JoeysRetroHandhelds Ай бұрын
Note: According to muOS dev's, here's the explanations for shaders in case you don't want to remove them, they serve a purpose: "The reason we ship with a default shader is to remove jittering/stuttering you'll see in some games. You'll notice this very easily if you boot SMB1 on NES without shaders or filters and just run right for a few seconds. There's been a lot of time put into fixing this (it's actually particularly egregious on StockOS). I think we have a fix that should make the next build (and is already in the 28xx build) that won't require a shader. You could also enable the Normal4x filter which will remove that issue as well."
@manishi7 Ай бұрын
Just ordered my first retro handheld ever and will be using this guide to set it up with beans. Praying I learn to flash the sd properly. Thanks for the guide!
@PsychoStorm88 4 күн бұрын
Using this guide right now to set up 3 separate handhelds for gifts. Thanks, Joey!
@nl8345 Ай бұрын
"joey sucks" you've sealed your own fate
@efdee Ай бұрын
Just got myself a 35XX H and this was very helpful. Thanks!
@ASAN2042 Ай бұрын
Best darn retro handheld channel on KZfaq in my opinion 👾🤖💯
@JoeysRetroHandhelds Ай бұрын
No, you're the best.
@tripsb97 Ай бұрын
This video was extremely helpful! I really appreciate you making this. I was using stock OS because I actually liked it but was having issues where it kept crashing every time I booted it up. Finally decided to download muOS and got everything working perfectly including moving my Pokemon Emerald save file over because of this!
@antiKk_00 Ай бұрын
Stellar work again mate!
@zayanahmed6915 Ай бұрын
Thanks for the guide, Joey! I'm gonna be using your tutorial to load MuOS into my 35XX Plus Cheers! ♥️
@JoeysRetroHandhelds Ай бұрын
Have fun!
@hyperplayrpg Ай бұрын
Nice Joey nice! Thank you for all the awesome H stuff recently
@JoeysRetroHandhelds Ай бұрын
You bet!
@weakvar Ай бұрын
This person must have more followers. Great content!
@chocho2188 Ай бұрын
Nice looks good. Thanks joey
@ReadGameCraftCook Ай бұрын
For anyone curious, I see some people asked in the comments, your sd card might show different under "Partition Scheme" and "Target System". You don't need to format or reconfigure partitions before using Rufus as after it completes it will be correct. Excellent guide, thank you for your hard work.
@PurestBollocks 21 күн бұрын
Wow! Super smash bros looked like it was running super smoothly. This is something I need to do. Thank you so much for this vid
@PurestBollocks 21 күн бұрын
Did you happen to try Goldeneye? Any luck?
@JiggityJiggity Ай бұрын
Might have to revisit this for the xx sp
@wizzel22 Ай бұрын
I follwed your Tips and now 2 days later i have a full blown 128GB Setup. MuOS is good, but it has a few bugs that don't pop up at first glance... BUT if you put your mind deep into it, it finally works. MuOS has RetroArch 1.18.0 vs. Stock with 1.10.3.
@dvornikovalexei Ай бұрын
Spent my entire day watching this, setting up muos and scrapping box art. My disabled self didn't like this manual labor at all. Great vid btw
@franarteaga6355 Ай бұрын
This is amazing. I just ordered my 35xx h from aliexpress today. I hope someone makes an updated video of how some n64 games run on this new os while I wait for it
@agalvez4 Ай бұрын
Loving muos simply for the fact that drastic works on it without any tweaks. It was completely broken for me on batocera
@AdrianoDennanni 18 күн бұрын
Congrats on the tutorial, Joey. The wiki for muOS is very lacking and I got very important information from this video.
@yadspi Ай бұрын
You should ask why they ship it with threaded video ON by default, the devices are good enough to not use it, it creates stutters and adds input latency. At least you can turn it off in the config file in a PC (it freezes if you do it on the device)
@stephenmontverde Ай бұрын
Thanks!
@JoeysRetroHandhelds Ай бұрын
No, thank you! I appreciate the support :)
@cauzaster3467 Ай бұрын
Hey great video thank you o followed all you instrc but my joysticks are not working on some games is that normal i have the H model
@sergiomer6 Ай бұрын
I just made an IMG and booted up MuOS..truly smooth. Question: Does it have video player support (MP4, MKV, etc..), like the latest stock Ok of anbernic??
@mazapatero Ай бұрын
Is the battery drain issue fixed with this OS? It happens to me even with stockOS (that I switch off with full battery and I switch on next day to maybe 80%). Thanks!
@GentlePianoMusic Ай бұрын
Amazingly useful video! I'm thinking of moving from Batocera to Muos - can I just cut and paste the saves and box art from one to the other?
@SanzaSense Ай бұрын
This looks soooo clean! Going to work on this on my 2nd xxH handheld. Now I understand that this guide is meant for the handhelds being mentioned But Is muos also on the OG Rg35XX and is it any good?
@JoeysRetroHandhelds Ай бұрын
Still in development!
@hello_artem 6 күн бұрын
Спасибо большое! 🤩🤩🤩
@MonsieurKaZe67 Ай бұрын
Thank you very much for this highly detailed tutorial about muOS on RG35XX Plus. Would it be possible to explain how to use the script from antiKk to get the meta text with Skraper?
@pspsmallz Ай бұрын
Good guide but do I need to format my 252 gb sd card to fat 32 before flashing the cfw onto it with rufus? Any specific settings for formatting and flashing I should have too? Cant wait ti try out this cfw on my rg35xx h for some n64 emulation.
@v1982on 10 күн бұрын
Awesome guide, thanks for your work. BTW, some box arts I scraped are sideways. How do I fix it?
@lonealextech5446 Ай бұрын
Awesome video man. I've noticed that removing the shaders makes NES and SNES roms stutter for some reason. Also happens in Botacera. Not sure why. Also, the DOSBox-Pure core won't recognize the DPad inputs in MuOS for dos games.
@JoeysRetroHandhelds Ай бұрын
Yep! Found that out after, check my pinned comment from the dev.
@strapanasi Ай бұрын
I have two problems with muOS: I can’t configure the controllers for N64 and most importantly I can’t boot up games using the external rice core, but I know that my roms are not the issue. Is there any guide available?
@KawikaLee408 Ай бұрын
The silver lining of not being able to afford a 35xx h with accessories is waiting for the firmware options to mature haha. They all seem almost there. All of this manual scraping is kind of a deal breaker for me atm
@FrancescBruVandellos 28 күн бұрын
Thanks for the video! Great help! Though, i followed all steps for adding artwork and it does not show on the system.
@gem8164 10 күн бұрын
big thanks for scraping tutorial
@Agumon5 Ай бұрын
Hey Joey, is this thing still in beta or is it fully fledged now? Is it better than Batocera that came out for these a few months ago, if so in what ways?
@Hunter_S_ Ай бұрын
Great walkthrough as always! You are my go-to for all handheld reviews and CFW videos. I am still having trouble launching N64 and Dreamcast games on muOS however. You mentioned at 19:29 that you also had issues booting N64 so I am wondering if you could clarify how to resolve this issue. Thanks! --EDIT: I pressed select in the games list and selected a core for N64 (rice) but my games still won't launch. Any idea why?
@JoeysRetroHandhelds Ай бұрын
Hm, zipped? Try unzipping them.
@Hunter_S_ Ай бұрын
@@JoeysRetroHandhelds that worked! You’re a genius! Thanks!
@MrSkinnedpuppy 22 күн бұрын
Any clue how to add custom artwork for rom hacks etc? I thought it would as easy as dropping a properly named file in the right directory but that just gives a white screen with "No Dat" displayed, looked at the dat file but there's nothing obvious to edit in there either 🤷🏻♂
@kput99 Ай бұрын
does muOS support stylus usage on NDS games on the RG35XX plus? setting things up for the kids and am so confused
@TM-vn3ei 27 күн бұрын
how do you set to auto boot last game? also for some reason I done the scraping and it worked but they do not appear when I scroll through my games list, no preview or box art. Not sure what I've done wrong. Great video helped me set up my RG35xxH.
@TM-vn3ei 27 күн бұрын
I figured out you cannot have roms in seperate folders it has to just be the rom file within the console folder itself it cant be console folder>rom folder>rom otherwise the skraper will put all your image files in a sub folder too and they will not appear when you scroll games.
@caviasjeannete 12 күн бұрын
Hello, good morning, I have a couple of questions, can you play nds? With this OS, platforms such as n64, dreamcast, psp are optimized? With this OS, are the same filters applied as well as the Gba logo in the games? Do they serve functions like WiFi and Bluetooth? Thanks, I'm using the translator so my English won't be perfect
@anthonycaico5351 Ай бұрын
Is there a reliable way to flash the image file onto the sd on android? I keep trying to flash it, but it keeps getting stuck on the splashscreen boot up
@UniqueJ Ай бұрын
Looking to do a two card setup so I can have tiny best set go game library on card number two. Is it a big difference in setup? And isn't it easier for future updates or to try different OS to have a 2 card set up?? 🙏
@JoeysRetroHandhelds Ай бұрын
You can: muos.dev/help/addcontent / muos.dev/help/sd2issues
@doggojotaro7420 22 күн бұрын
I'm lost at 4:47 what am I supposed to do everytime i press add it tells me to browse and choose a file
@kruger2635 Ай бұрын
Is it true that bluetooth and HDMI out is till not wokring with this OS. Is it aksi possible to hot swap Firmware?
@moonyvilanful Ай бұрын
My RG35XX H doesn't boot up when I insert the SD card freshly flashed with muOS beans for the initial boot. It doesn't have a problem booting up when I go back to the SD card I previously used with batocera. Can anyone please help? :S
@g.v.a2607 Ай бұрын
Hi, Just did the scrapping according to your video (just the preview pics, no boxart cause I do not need it) but they do not show up when cruising through the games... Looks like everything is there in the right folders on the SF card though. System icons work perfectly though. Do you know what might be the problem ?
@g.v.a2607 Ай бұрын
Ok, got it. Whatever artwork you put in the "box" folder is displayed in the game list. What you put in "box" and "text" is displayed when you push the menu button to see more information in the game.
@OceanTechh Ай бұрын
Any idea if it maintains the same battery performance as the original software?
@Blizky Ай бұрын
What’s wifi useful other than retroachievents?
@zetacorn3749 Ай бұрын
Can you use a dual card set up? Specifically. Having my ROMs on one card in the case of the plus and my OS on the other.
@JoeysRetroHandhelds Ай бұрын
You can: muos.dev/help/addcontent / muos.dev/help/sd2issues
@sxixlxnx Ай бұрын
The RG35XX series taught me not to be a FPGA snob. This thing performs better than my Analogue Pocket.
@TheAlixSH Ай бұрын
Can somebody tell me how in the world I don't have a bios file in my stock OS 240409?
@BruceForte 27 күн бұрын
Bought a name brand sd card and still got fucked; not showing up in windows after flash and install, not even via diskmgmt... Any idea what to do?
@Zoroasterisk 13 күн бұрын
Try connecting it to an alternate device, or use a different reader. I have an Anker card reader that will not read the new Sandisk 512gb card I just got, but it'll read other cards, and that card will work with other readers. I think there's probably a software solution that could fix your problem, but it's above the my pay grade
@YubzTv 9 күн бұрын
After flashing the sd card, insert it into the device and let it boot up fully until you are presented with the main menu etc, then power off the device and put the sd card back into your computer or laptop. You should be able to see it appear in disk management and assign a drive letter after that.
@jajolnakjajanonlineenak9056 23 күн бұрын
Hi, is there any tutorial to scrap box art on MacOS? thankyou!
@ADHDreams Ай бұрын
Is their a quick shut down shortcut? Thanks for the Vid Joey!
@JoeysRetroHandhelds Ай бұрын
Not yet no.
@ADHDreams Ай бұрын
@@JoeysRetroHandhelds awww it’s the only feature that has me stuck on stock OS. Thanks, Joey.!! 🙏
@wizzel22 Ай бұрын
@@ADHDreamsLeft on the Main Menu, Shutdown Device, boom.
@Maor595 Ай бұрын
Hi, I'm currently doing your guide and now I'm in the Scraper stage and after a while I got the message that I've reached the end of the daily scraping but it's not good because I have a lot more ROMS to do for them and I wanted to ask if you know of another option where it's also possible to do this and thus work simultaneously with two Software instead of waiting?
@JoeysRetroHandhelds Ай бұрын
Only way is to donate on the site.
@johnweak9041 Ай бұрын
i am planning to buy 35xx H,is it required to use 128gb? i only have an extra 64gb
@WillC1020 Ай бұрын
Does MuOS support OTA updates? If there’s an update, not sure I would like to set all of this up over again.
@TexasBaker 13 күн бұрын
Not yet, but it DOES have built in backup utilities that greatly simplify updating the OS. Also, it's 100% NOT complicated putting your roms on a secondary SD - in fact, you can scrape all your systems and then your games and box art will stay there, and you can backup your saves and configs before flashing a new update, then restore those backups and be up and running immediately.
@iamalittler Ай бұрын
And by long while you really mean long while, after 45 minutes I restarted with a different SD
@JoeysRetroHandhelds Ай бұрын
Oh more like 5-10 minutes max, any more and something is wrong. If you mean the first install of muOS.
@iamalittler Ай бұрын
@@JoeysRetroHandhelds yeah, it was definately the fault of the microSD I used. I threw in the SD I got with the device and I'm already setting it up
@alucard779fx5 Ай бұрын
what if after I do the Rufus part the device dont turn on? I followed the steps correctly im using a onn. A2 micro sd 128gb my device is the RG 35XX
@JoeysRetroHandhelds Ай бұрын
35XX Plus or 2024? If you have the original 35XX, this doesn't work for that.
@Syko1985 Ай бұрын
Just putting my Gameboy games into my "Joey Sucks" folder right now 😁
@keeganmaffiore6462 17 күн бұрын
Mac user, is there any other way to get box art? I have all the image files
@eight-fold-path 6 күн бұрын
Hey Joey, never mind on my inquiry. My 35XXSP does not charge, so I’m sending it back to the retailer.
@robinhuang Ай бұрын
It unable to display non-ASCII file names 😥
@MrCrammer Ай бұрын
How does performance compare to Koriki?
@eight-fold-path 6 күн бұрын
Hey Joey, based on your review of the RG35XXSP, I bought one today. I’m concerned since I use a Mac, your instructions of firmware upgrades is way beyond my comprehension. Do you know if there is a community member that can set up my new SP with CFW? Of course, I’d compensate that individual for their time.
@JoeysRetroHandhelds 5 күн бұрын
Apologies, don't have a Mac. Likely only need to find a Rufus equivalent for Mac.
@daisyj1199 5 күн бұрын
it doesn't look like folder is in the Catalogue anymore? do i make a new folder with the name folder or do something else now?
@riccardoosvaldonana9359 5 күн бұрын
Same problem here!
@JoeysRetroHandhelds 5 күн бұрын
Weird. Yep you can just make the folders like they show on screen.
@shinobukimetsu Ай бұрын
Does this OS supports external Joystick and TVout?
@timcn3602 24 күн бұрын
@JoeysRetroHandhelds Hi Joey, my DC roms are folders containing CUE and BIN files. MUos doesn't see them as games so I need to enter the folder and find the CUE to launch the game. It also means I can't select a default core for all the games in the system. Any tips?
@JoeysRetroHandhelds 24 күн бұрын
Hey, I would convert them to CHD - joeysretrohandhelds.com/guides/recommended-file-types-for-roms/#Sega_Dreamcast
@timcn3602 24 күн бұрын
@@JoeysRetroHandhelds Thanks! One more thing: I've got TMNT running through Portmaster but the scaling is way off (RG35XX+). I can't seem to find the config file to change the resolution manually. Do you know this by any chance?
@JoeysRetroHandhelds 24 күн бұрын
Apologies, I do not, I would check on the muOS Discord.
@Maor595 Ай бұрын
I would appreciate your help. I got to the part where the theme is set and I downloaded the ART BOOK zip file, but when I get to the device and select it, the display on the device goes crazy and turns into strange colors and not like yours. How can I solve this? ? Thanks.
@JoeysRetroHandhelds Ай бұрын
I would join the muOS Discord and try troubleshooting there, that's unfortunately out of my knowledge.
@Maor595 Ай бұрын
@@JoeysRetroHandhelds oh now it’s working I’m so happy thx for your guide I love it🙏🏻
@youplaymenot Ай бұрын
@@Maor595 How did you fix it?? I am getting the same error.
@budgetking2591 23 күн бұрын
How to connect usb gamepad on muOS?
@daorothtv8177 Ай бұрын
What would be the best Os for a R35S? I bought one and tried to install R36S Arkos but im having lots of trouble
@JoeysRetroHandhelds Ай бұрын
That's unfortunately the only option, you can follow my setup guide and the pinned comment on that video.
@paulmarchetta2516 Ай бұрын
So I’m trying to add box art from Skraper on my XX SP I just got. After I select the ROMs location on my stick and hit next twice it just closes out. Any ideals?
@JoeysRetroHandhelds Ай бұрын
Hm, no, sounds like something is broken with the program. Try a reinstall of Skraper?
@paulmarchetta2516 Ай бұрын
Thanks man I’ll try that when I get home. The card is all set and working just fine. Been using my system just fine too but not sure why skraper isn’t working, would it be the stock OS?
@ZsH85 Күн бұрын
why cant it play snes games for me i dont understand, it was the same with original os.
@Tugennov 9 күн бұрын
Dreamcast core or other advice? I'm not having any luck running Dreamcast games? Does anyone have a recommendation of which of the five Dreamcast cores works best for most games? Thanks for the video! Cheers.
@JoeysRetroHandhelds 9 күн бұрын
Flycast VL would probably be best. If they're not working, make sure you're using the right bios.
@Tugennov 9 күн бұрын
@@JoeysRetroHandhelds Thanks!
@ItWasWritten516 Ай бұрын
anybody know if the set up process is the same for Mac users? im using an old MacBook and had the hardest time setting up Onion OS on my Miyoo Mini Plus, being borderline computer illiterate def didnt help
@tswan137 Ай бұрын
Classic mac L
@ItWasWritten516 Ай бұрын
@@tswan137 a more useful reply would have sufficed but it's cool
@drickph3066 Ай бұрын
is rg35xx 1st gen included ?
@Equalz420 12 күн бұрын
Hi, Can't seem to fetch the box art, it's like the script is no longer useable?
@JoeysRetroHandhelds 12 күн бұрын
Just did it yesterday, so I would double check your steps.
@Equalz420 12 күн бұрын
@@JoeysRetroHandhelds Thanks, got it working. I had to download the raw script and not just right click save it.. oops
@Switchcollector Ай бұрын
I dont have the BIOS Folder or ROMS I accidentally deleted my original sd card
@JoeysRetroHandhelds Ай бұрын
You will have to source them unfortunately. If you want the ones from the device, the Anbernic stock firmware has them, from their firmware download site.
@knyaz3v Ай бұрын
4:12 RIP midnight users
@greezelybear8211 Ай бұрын
How do I scrape the box art if my roms are on TF2?
@JoeysRetroHandhelds Ай бұрын
No clue, it's why I didn't recommend two SD cards :)
Ай бұрын
Anybody knows if this firmware works for regular RG35XX?
@JoeysRetroHandhelds Ай бұрын
Not currently no.
@Yas_lacerda 14 күн бұрын
My box arts and previews don't show up, I don't know why 😢
@JoeysRetroHandhelds 14 күн бұрын
Try going through the guide again and making sure they're in the right folders. muos.dev/help/artwork
@JeromeGdlt Ай бұрын
What about rg35xx (no H, no plus)?
@JoeysRetroHandhelds Ай бұрын
TBD from the dev.
@Happy-Hunter89 Ай бұрын
Came to ask this too.
@nicolasfells5929 Ай бұрын
can I use two SD cards one for SW and one for ROMS?
@JoeysRetroHandhelds Ай бұрын
Yes, but you won't be able to scrape artwork as easily.
@brunan-gi147 15 күн бұрын
Does that OS work on RG35xxSP? Thanks
@JoeysRetroHandhelds 15 күн бұрын
In the upcoming update, yes.
@gboyzgaming4824 Ай бұрын
Theres no bluetooth setting
@Rayu25Demon Ай бұрын
can you trade pokemon in the GBA games?
@UniqueJ Ай бұрын
I don't think you can. But I'm sure hoping that we're able to with the future update. Along with Bluetooth audio, over there updates, and HDMI.
@Rayu25Demon Ай бұрын
@@UniqueJ retroarch 1.17 and higher with the latest gpSP core version can do it.
@mipad4491 28 күн бұрын
64gb enough?
@smulligan Ай бұрын
what do we select if we're using the SP?
@JoeysRetroHandhelds Ай бұрын
Currently, the Plus.
@smulligan Ай бұрын
@@JoeysRetroHandhelds Thanks but lets say hypothetically i picked the wrong one... is there a way to reselect that once its installed?
@JoeysRetroHandhelds Ай бұрын
@@smulligan Yep, in Configuration.
@mrgjames4065 Ай бұрын
Dual Card setup supported?
@JoeysRetroHandhelds Ай бұрын
It is, but annoying for box art.
@CheezzyBoii 8 күн бұрын
bro it dosent show my sd card on my pc
@JoeysRetroHandhelds 8 күн бұрын
I show in the video, but head to disk management and assign a letter.
@ArtistCameron Ай бұрын
N64 is much better than in trimui smart pro... 😢
@CarlosDiaz-fs6cv Ай бұрын
No 28xx?
@JoeysRetroHandhelds Ай бұрын
Not yet.
@dynastyl8877 Ай бұрын
What if you don't have Windows? Can you use another platform ? I have Chromebook will that work with this as well?
@ganjagaming3222 12 күн бұрын
Work RG35XXSP?
@JoeysRetroHandhelds 12 күн бұрын
kzfaq.info/get/bejne/icmqq7CJnsXcd3U.html
@ganjagaming3222 12 күн бұрын
@@JoeysRetroHandheldsthank you 😊
@iamnotyourbuddyGUY Ай бұрын
Comment
@TheManWithTheFace Ай бұрын
I prefer botocera far more
@shinobusensui9395 Ай бұрын
same, it has bluetooth, which is major. My 3.5 jack on my rg35xx plus lasted 3 days.
@TheManWithTheFace Ай бұрын
@@shinobusensui9395 thats crazy Ben using my RG 35XXH That One has been my favorite so far for PlayStation. I just picked up the trim UI Smart pro I like it a lot when I opened it the right LED buttons would not work. I was gonna return it, but I work on electronics so I took it apartfrom the factory, the ribbon from the motherboard was not connected to the board so I reconnected it and it works great now
@TomekAG Ай бұрын
Does botocera support Bluetooth audio?
@shinobusensui9395 Ай бұрын
@@TomekAG yep its been there for some months. justs a head up, if you dont connect a bluetooth audio device but device continues to play on the handheld, go in audio and switch the audio channel.
@TheManWithTheFace Ай бұрын
@@TomekAG I’m not sure I will have to test and I will let you know
@LucidLPO 26 күн бұрын
This is unbelievably tedious, why doesn't it just recommend which core is best for each particular rom? That's what you're doing manually, why doesn't a list exist already? Not to mention you can't even save the core settings for each rom... im just supposed to remember? This is like when i go to play skyrim, i add all the mods i want, get them configured perfectly... then by the time i'm done I don't wanna play anymore...
Joey's Retro Handhelds
Рет қаралды 29 М.
Joey's Retro Handhelds
Рет қаралды 147 М.