I removed the regulator valve today. It was very difficult to get to. I found the best way to get to it was by removing the shifter. Then using a 13mm shallow socket with a wobbly 6inch extension.
@monray3002 жыл бұрын
Yep there nothing easy on these engines
@harpreetdhindsa7774 Жыл бұрын
I have same problem can you till which side regulator valve please I couldn’t find
@elnmrouno Жыл бұрын
@@harpreetdhindsa7774 it’s on the driver side behind the block. Not on the head. The valve was fine. The low fuel pressure was caused by the transfer pump.
@harpreetdhindsa7774 Жыл бұрын
@@elnmrouno where they located transfer pump I already change regulator valve still same problem
@elnmrouno Жыл бұрын
@@harpreetdhindsa7774 the tansfer pump is located by the air compressor. It’s on the driver side of the engine.
@user-ph8di7oq6f Жыл бұрын
hello, I had a problem in the second section of the high pressure pump, I changed the plunger inside and the valve was jammed, now my question is with the cups is everything okay? what do you think?
@monray3008 ай бұрын
Sorry I don't think I saw this.
@luisresendiz20182 жыл бұрын
Thank you for your help, it help me a lot your advise.
@matthumble3585 ай бұрын
What was the fix to this mx that only has 3 psi on low side fuel pressure?
@monray3005 ай бұрын
I think I made this video to answer some questions, but I didn't get to work on the truck 😊
@matthumble3585 ай бұрын
@monray300 Darn, I got one that's doing the same thing as described in your video.
@mex20oax3 жыл бұрын
I appreciate the schematic, that definitely will help, I will go see that truck tomorrow, and hopefully one of those turn out to be faulty. Thanks @damon bramel
@monray3003 жыл бұрын
I hope it helps
@grumpystruckshop38072 жыл бұрын
Daf has mx, fuel filter module has valve built in,, need to replace it, complete.
@luisresendiz20182 жыл бұрын
Tanks ittt bery helpfully
@matthew6202 Жыл бұрын
Hey any idea why I can only get 20-23psi boost when it gets under 15 degrees outside and as soon as it is 15 or above it boost normal 30-32psi.
@monray3008 ай бұрын
I think maybe your fuel is jelling and restricting your filters
@matthew6202 Жыл бұрын
My MX13 misfires after hitting around 40-50 mph only when you let go of the gas pedal and hit another gear. Kinda like it’s starved for fuel but if you stay in the gear and don’t let off gas it’s fine. It also does it when I go to downshift up hill but if I don’t let off the gas pedal completely it won’t do it. Any ideas?
@matthew6202 Жыл бұрын
It’s an epa 10 also
@monray3008 ай бұрын
Maybe sucking Air
@matthew62028 ай бұрын
Was a bad injector. Replaced them all and it ran great.
@piotr34682 жыл бұрын
Hi, do you know where is fuel low pressure regulator on MX11 engine. I replace the lift pump but still have only 2 bars ☹️. Thank You
@monray3002 жыл бұрын
I'm not sure on mx11. But I think places you can loose pressure are at the lift pumps and the regulator on the high pressure pumps
@user-fv5qt4ge5n8 ай бұрын
good morning sir . do you mind providing a copy of the fuel flow diagram please
@monray3008 ай бұрын
I don't really have time. What problems are you having?
@sultanminhas Жыл бұрын
Sir i have problem with fuel restrict 100 change filters again and again change 3 different dealership nothing change facing this last 5 months any kind of sugession plz. ?
@monray300 Жыл бұрын
Is your fuel contaminated? Sometimes they put the wrong fuel filters in, if they don't use the vin number, but it's unlikely 3 dealers would. Is it restricted or sucking air? Request they change filters by vin number. I know Missoula Montana Peterbilt has 4 good paccar mechanics.
@mattlacasse19103 жыл бұрын
Can you post picture of this diagram?
@monray3003 жыл бұрын
Can you give me your email?
@jessicaguerra39373 жыл бұрын
@@monray300 could I have a picture of the diagram as well? Having a few low pressure codes.
@monray3003 жыл бұрын
@@jessicaguerra3937 I'm not sure where I put it
@kingspring1970 Жыл бұрын
I’m getting a low fuel pressure fault. Before getting a PM, the water separator would fill all the way up. After the PM it doesn’t but I’m still getting the same code (SPN-94)
@lilbitofhoney2 жыл бұрын
I have black smoke. Could this be the issue?
@monray3002 жыл бұрын
I guess it could, if you have a dpf it shouldn't. What else does it do?
@luisresendiz20182 жыл бұрын
Can you post a picture off the diagram please
@DB-bk9tr2 жыл бұрын
I hate these motors. Plastic on plastic on plastic