Air Mouse on Ebay: ebay.us/LJ0Htd ebay.us/tCYlyv 😀 Thank you for watching. Please Subscribe to this Channel. I will appreciate it.🙏

I have this same remote without the name brand at the bottom and all of the buttons are programmable. I programmed the actual volume buttons, pg (or channel) +/-, mute button, home key, arrow buttons, OK button, back button, etc. Really awesome. It's better in my opinion to use actual volume buttons for volume instead of the little ones at the bottom of the remote.

I'm confused, what does the volume keys do? If they can't be configured, what's the point of having them?

Thank you. With your explanation I was able to configure almost all the Air Mouse buttons. TV button, Then button that I want to configure, Press the same button but on the other remote control, Finally to save the TV button

Factory reset is as followed: hold down the "TV" button and the "DEL" for three seconds. The red led light will blink repeatedly, when it stops the process will be completed.

IR RANGE ISSUE - If your programming doesn't seem to be working, you may need to be closer to the IR target. My TV remote works from over 10 feet away, but the air mouse IR signal is weaker, and only works from 5 feet away.

Thank you. This helped me tremendously. Was about to buy another remote control bcoz i thought my mx3 was broken.

Thanks, took a while to figure out your vid. be better with narrative instead of music as it appears you are touching the top power button when you are just pointing to light. But eventually figured it out.

Thumbs down for making me mute by volume from that loud annoying soundtrack

Yeeaah.... Confusion with the music and subtitles. Will try it tomorrow

I wish I could find the instructions in writing as a step by step. This is useful but I cannot take it with me.

Too bad, I explicitly bought "yours" with the Bonusis branding to get one of those remotes that would enable programming of more than just the colored keys. But apparently they put out a new series in 2017. Remote looks exactly the same, but programming is slightly different, and unfortunately only colored keys can be programmed. Bummer! I want a replacement of my TV remote, not an extra one. :-(

This video would be 100% better with a voice explanation

Hello I can not connect my 2 remote control. I tried a dannie of faith but nothing

I've always found that when I removed the batteries from MOST electronics of this type--automatic reset to factory specs. Hope this helps.

good video, but that music is a kiler ..

Can you please tell me how to turn on the TV while I don't have the original TV remote I lost it, I switch on my smart TV manually I used every thing smoothly and turn it off with air mouse but it doesn't turn the TV on every time I need to switch it manually

I have purchased many of these remotes over the years. Lost count of how many I have. The original is Aerb remote but the the manufacturer sellers to many sellers under different names. You can find on amazon. Same shit, different seller. They have different models. Some have mic, some don't. Different colors. Newer model has backlit. On all of them you can program the 4 colored buttons and the power button (by default the power button will shut off the unit your're controllig (eg: PC, TV, DVD player, etc). But maybe you are controlling the PC but want power button to shut off TV instead. Problem is there is a defect in the backlit unit. When you program a new function, the old one doesn't get erased. So now, pressing power button shuts off TV AND computer each time. Also, the reason I have purchased so many of these remotes over the years is because all of them have a major physical defect. There is a weakness on the lower right hand side near battery compartment. Eventually, it will weaken and crack. I'm careful with remotes. But any slight handling, bump or anything and the very fragile piece of poor quality plastic chips. Big deal right? Well that small part is like the exhaust pipe of the the death star. It chips and then the whole thing falls apart. I can't get a remote to last me more than 3 -4 months in for any of my 3 tv's. Other than that, remote is great but I think I need to move on to another remote.

Thanks for the tips, my air mouse is with the cursor of the direct pointer going up alone, already tried the hint of pressing Home + ok keys, together, but the light is on, does not blink, what should I do to try to solve this problem?

Thank you. that was very helpful

Thank you!!!!! Nice video

I bought one of these, its bad is that it has no touch pad, then it does not work in some apps that have to go down in more options, like movie apps etc ...

Thanks for the video. It helps, given the manual is a bit hard to read. I have a Measy branded one. It chews through a pair of batteries just about in a day. There seems to be a power wasting problem with this device.

if usb misplace, what should be the next for remote active?

Same here i have one and could program other buttons but for some reason i could get the channel down to work but not channel up bummer.

Having an issue with the remote where I plug in the USB dongle to android box an it's causing the audio to glitch

thanks you was very helpful

How can I program a remote to work with my MX3 without an already working remote ? I received a remote that does not work with the receiver and the remote does work.

Have the same remote, can you please guide me step by step how to transfer the input selection function from my tv remote to the air mouse remote, if possible.

My remote can only learn on those 5 buttons and nothing else. It looks exactly the same, it is just missing the brand logo at the bottom.

How do I customize the air remote to increase the size of a mouse pointer? Please help me cos it little for me on the huge TV screen really.

How do I get the air mouse to power up the android box. All works on air mouse including powering down tv box, just not powering up

worked perfect

رهيب

When i press and hold my tv button on my mx3 it starts blinking every 0.5 seconds.

Hello, the numpad on the front face is working as a pc keyboard input or only as an IR TV input ? Thanks

how to default reset back air mause if dont want yet ir copy function in remote.

Hello, I can program the buttons to turn on the TV and the android box. That works fine, BUT then it's impossible to use the air mouse in the android box. How can I make that work?

Svp le voyant rouge il ne s'arrête pas de clignoter pourquoi

Thanks. How can make the microphone to work? I have it on a tv box (gt1) but have not a button for voice orders. Any idea?

hellou, is there some ´´ right mouse button´´ on this remote? update i find it, it is back button btw this is best air mouse which i had,

Can you copy a macro from other remote or it will just copy a single command?

hi Din Vision, nice info for us . i ask you if you know if exist some air mouse -keyboard that have the Navigation virtual Keys ( home-Back and this is importante to use --the Recent - key-- that do what this virtual button do at Android (Recente virtual buttons) - the Recent square button - the multitasking square button to acess /change /close aplications running, on device. Can Help ... ??

How to reset all settings? After trying to set it up, pressing any button blinks fast and doesn't work! Does not work through your USB receiver!

how do I set this up with no remote

Is there a way to get it out of program button mode? It seems to be stuck in that mode for me can't get the LED light to stop blinking

does someone know if there is a software on PC , able to test individually all the 6 motion independantly, thanks

Anyone know how to make the pointer larger on the screen for the T3?

Can this be programmed without the tv remote

Does anyone know how to access the TV Text from Rii?

Do you know if the back light version of the MX3 can also IR program other buttons besides the five buttons (4 color and 1 power)? If so, I can combine all my IR remote controls into one

Do u know how to reset the button ?

It's not working for me :(

Doesn't work for Android box a96z

How do i canal ActiveX gaming modelo giroscopy

The red light doesn´t stop blinking, it´s that normal?????

Ai amigo você tem o controle do duosat next uhd para mim usar no Dousat next uhd lite fala ai amigão

cant exit programming mode :( mine keeps blinking any idea?

my mouse cursor has started moving on its own for this remote does anyone know how to reset it?or fix the issue?

Can you program this without another remote?

I understand

Curser keeps drifting away, any solution?

I also use MXQ Pro 4k. MX3 Air Mouse it can search by voice?????

Does it loose its programming when you replace the batteries?

How to can reset the programming of the IR keys?

For fucks sake when I clicked on this video almost blew my speakers, does music need to be so loud!!!!

Not a visual leaner despite multiple gaslighting attempts of psychiatry, do you have written instructions this video seriously doesnt work

These boxes that only have 5 programmable buttons are JUNK! What good are all of those other buttons on the remote if they also can't be programmed to control TV functions? The volume control, mute, navigation pad, home button, etc are all just useless fake buttons for TV control. MOST of these Air Mouse remotes are this way - but not all... Shop carefully and you will find that there are a few which support programming all 42 keys. The price is almost exactly the same also. I got one with all the keys programmable on Amazon for $16. UPDATE: I got one from Amazon seller pendoo that promised to be able to program all the keys, but had a hell of a time figuring out how to program the keys for IR mode. The supplied instructions did not work. I had to modify the programming technique and did eventually get most of my TV remote functions transferred over to the Air Mouse. Unfortunately, it lost the programming for the power button and it has resisted all efforts to reprogram it using the exact same technique that worked to program at least a dozen other keys. I can sometimes get the power button programming to work one time (after reprogramming) but then it quits again. All of the other IR programmed keys for my TCL Roku TV continue to work though. VERY FRUSTRATING. These things must have buggy firmware in them.

This is the most confusing shit I ever seen. 🤣 Why point it at another mouth/remote? What if u don't have another remote? My old one was smashed so I can't do whatever ur doing with 2 remotes

My mxq pro remote stops working. Any clues?