MY $350 Titanium Martinez hammer broke

No video

MY $350 Titanium Martinez hammer broke

Рет қаралды 5,373

Күн бұрын

What does Martinez think of their hammer breaking in under a year?
#tools #bluecollar #bluecollarlife #construction #work #dirtyhandscleanmoney

Пікірлер: 43

@KC-rk1hx 6 ай бұрын

I’ve been using an m1 for a few years. 15 oz head steel bolt. I have heard steel has better shear strength then titanium. I work in bridge construction primarily and do some remodeling when I can. Never had any issues aside from wearing out a handle.

@whilomforge3402 7 ай бұрын

Anyone that thinks that $300 for a tool you use every single day is a lot money… doesn’t actually use a hammer on a daily basis. I know guys that spend tens of thousands of dollars on aftermarket parts for their trucks, just to make them look “cool”, but will bust my chops about buying a Martinez hammer… well, I’ve been using my hammer everyday for years, without fail, and their trucks? Well, let’s just say I spent my money more wisely…

@ScoopsTVtools 7 ай бұрын

No lies told

@whilomforge3402 7 ай бұрын

@@Grauenwolf you’re wrong, though… see, I can make many tens of thousands of dollars from my hammer, and in the process save myself years of tendon damage. Just for a couple hundred dollars? Also, comparing a tape measure to a hammer is disingenuous. A tape measure will last me 6 months, maximum. And I pay $30 or more for them. So, given the fact that my hammer is a lifetime tool, I don’t mind paying $300 for it. Again, this is setting aside the health benefits, which are priceless.

@ScoopsTVtools 7 ай бұрын

@Grauenwolf Well , I just paid $249 for a tape ...you guys will hear all about it when I release the video

@chriscalderin6677 7 ай бұрын

Exactly the comments are full of people that are not professional but just general labor

@whilomforge3402 3 ай бұрын

@@rocko-go4vf good for you, but I don’t want to damage my elbows and wrists more than I already have.

@clarencelewis6506 7 ай бұрын

It's the best hammer on a market and they back it up no more elbow issues stop hating in try one

@ScoopsTVtools 7 ай бұрын

100% ...I am going to try an Earnerbrand soon but it's gonna be hard to beat martinez

@chriscalderin6677 7 ай бұрын

Metal fatigue is real I had a ratchet I took a few times way past the torque I thought it would take and was rated for and was surprised it still worked and then broke later down the road on a lot less torque

@chriscalderin6677 7 ай бұрын

A hammer is extreme shock consistently

@ScoopsTVtools 7 ай бұрын

Titanium is also not as strong as people assume it is .

@user-cs5gj9zk9z 7 ай бұрын

Love to see it, bro!

@mikekevelder1193 7 ай бұрын

Where was it made ?

@ScoopsTVtools 7 ай бұрын

Martinez hammers are made in the USA

@ricktbdgc 3 ай бұрын

Titanium bolt too brittle? Wouldnt you want a grade 8 steel bolt?.

@ScoopsTVtools 2 ай бұрын

I prefere the slight weight savings of the titanium , steel is an option though

@dvig3261 7 ай бұрын

Let me giess...it broke when pulling a nail?

@ScoopsTVtools 7 ай бұрын

My coworker broke it pulling a pinch nail out of concrete

@Mark-op6tx 5 ай бұрын

The guy probably knew he was doing something a little naughty..... like putting a 3 foot pipe on a snap-on rachet before you torch it lol

@bowhunter9288 3 ай бұрын

That's a fighers nose right there.

@ScoopsTVtools 3 ай бұрын

Deviated Septum

@ellwoodwolf 7 ай бұрын

You bought a 350$ hammer? Hahahaha

@brianbecher5781 7 ай бұрын

Welcome to the cost of professional/quality tools for the job. Ask your barber/stylist what they pay for their shears....easy $200-500

@Drater-the_slow 7 ай бұрын

Hey fellas, this guy just ousted himself as a nerd. He doesn't even know the cost of professional grade trade tools! Hahaha.

@kickyourfaceandlaugh607 7 ай бұрын

I think $350 is a stretch but mine cost $270 shipped 3 years ago. Still enjoying it every day at work.

@H43339 7 ай бұрын

Anyone that would pay $350 for a hammer is Dumb $[-]!+ !!!! I have been a carpenter all my life and my 28oz Vaughan drivers nails better than a Titanium hammer could ever think of.

@kickyourfaceandlaugh607 7 ай бұрын

@@H43339 in my 10 years experience framing. Lowes hammers and Home Depot hammers don’t last. My m1 after 3 years still has a milled face not as sharp but still there. Now I did use my old craftsman hammer and holy cow it reminded me why I bought a Martinez. The craftsmen has a lot of vibration and for a 22oz hammer it doesn’t pack the same punch as my 15oz Martinez

@H43339 7 ай бұрын

Only a knucklehead would pay $350 for a hammer.

@ScoopsTVtools 7 ай бұрын

Do you know any carpenters ? I own 3 hammers all of which are over 250$ Cheap hammers cause tennis elbow

@H43339 7 ай бұрын

@ScoopsTVtools Yes I am a carpenter, I have been one for Oh 50 years give or take, I am a custom roof cutter and stacker. So far the largest house I cut and stacked was a little over 20,000 sq ft. But I have framed apartments, tracks homes, multi story condos, done gov. work for the military you name it and I have built it. When I stated out we didn't have nail guns. Good Day P.S. I always had a 28oz Vaughan framing hammer. And my elbows are fine, I bet I can take you arm wrestling.

@chriscalderin6677 7 ай бұрын

If it works for him it is worth not being out of work for a injury that sucks I also have a Vaughan all metal hammer but I do not use it every day