MY BACKPACK SPRAYER SETUP - TEEJET NOZZLES
Рет қаралды 36,013
Күн бұрынThis is a quick video explaining how I set up my Flowzone Typhoon backpack sprayer with TeeJet nozzles and quick connect fittings. Hopefully it is helpful to others who are looking to do the same. I get lots of questions about my setup so I felt a video would be best to answer.
Parts list:
TeeJet nozzles:
jimmylewismows.com/spray-nozzles
Flowzone now offers a quick connect adapter for teejet nozzles:
fzspray.com/collections/acces...
Parts used for the setup in this video:
Quick connect coupler option:
fzspray.com/collections/acces...
(Check your local HD or Lowes, etc. first to save on shipping)
45° nozzle adapter:
www.spraysmarter.com/teejet-a...
Teejet cap (locking nut):
www.spraysmarter.com/teejet-c...
Filter/strainer:
www.spraysmarter.com/teejet-s...
Thanks for watching! If you enjoy my content, please click the "thumbs up" button, drop a comment, subscribe and hit the bell if you haven't already!
jimmylewismows.com
Keep up with me on social media:
Instagram - / jimmylewis_1
Twitter - / jimmylewis_1
Facebook - / jimmylewismows
Email - jimmylewismows@gmail.com
Products/Gear that I use:
www.amazon.com/shop/jimmylewi...
My favorite lawn care products:
jimmylewismows.com/favorites
Send stuff to:
PO Box #31
Lehi, UT 84043
*I participate in affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking. I do earn a commission off of purchases made through the links contained within.
#CherishEachMowment
@jaygonzalez3555 3 жыл бұрын
Glad you shared this info. Just got my Cyclone 2.5 a few days ago, and now need to get my Teejet nozzle set up.
@MayweatherjrWONandsoTrump 2 жыл бұрын
As usual, worthy every minute of my time. Thank you for supporting us in the community and the time you invest on these great information videos
@MrMbrownjr 10 ай бұрын
I ordered the Typhoon 3 and all of the Teejet nozzles and accessories that you mentioned. Can't wait for them to arrive so I can try it out. Again, thanks so much!
@Barod52 4 жыл бұрын
Got both of these about two weeks ago on your advice. I've only used the foliar tip so far but it was so much better than the standard tip that came with my sprayer (not a flozone). I tested the other out but only with water. Really satisfied with both of these tips.
@JimmyLewisMows 4 жыл бұрын
Awesome. Happy to hear that!
@donslawns1 4 жыл бұрын
Good stuff Jimmy! I enjoyed the “tabletop build view”. 😎👍🏼
@JimmyLewisMows 4 жыл бұрын
Thanks dude!
@robguilfoil2470 2 жыл бұрын
Thank you for providing all this valuable information. Very helpful for us newbies.
@papamowslow196 2 жыл бұрын
I happened across this at the right time. Thank you for the simple yet thorough information.
@PacificNorthwestLawns 4 жыл бұрын
Always great TIPS Jimmy👊
@shane6002 4 жыл бұрын
Finally got my teejet tip and the accessories you posted in this video l used some Teflon tape on the threads just in case
@mikemorris8497 4 жыл бұрын
Yeah man . I got the Same Tee Jet Nozzles about 6 months ago. They are game changers for sure. W/SP EX 105.
@LawnJourneys 4 жыл бұрын
You keep teasing me with the FlowZone! I can't resist much longer!
@JimmyLewisMows 4 жыл бұрын
😉
@MrMbrownjr 10 ай бұрын
This video is EXACTLY what I was looking for. Thanks so much!
@dmoss9968 4 ай бұрын
Very Helpful my friend. I finally was able to connect an Extendable Two-Nozzle Boom that Flowzone no longer sells. Again Thanks uh MILLION
@thomaslahr9022 3 жыл бұрын
Man your lawn looks incredible.
@the-handy-fixer 4 жыл бұрын
Great info Jimmy. Ive been looking to upgrade to a teejet setup and you may have just pushed me to just do it!
@scottm405 4 жыл бұрын
Jimmy!! On point as always. I received my FlowZone Cyclone 2 on Monday, ordered the tips you recommended. I gotta say, going from the Ortho Dial and Spray to the FlowZone is great. No more hose to drag around.
@Travis2L 4 жыл бұрын
How long ago did you order yours? I’m still waiting.
@JimmyLewisMows 4 жыл бұрын
They’re manufactured in China, so they have been slow to ship recently. But back when I received mine it took only a few days.
@Travis2L 4 жыл бұрын
Jimmy Lewis truly saddening. My patience is running thin lol. I want to try and make a tank cover 8,000 sqft. Kinda like Pete. I need to figure this out!
@shion_lwn 3 жыл бұрын
Thank you for the detail explanation! I'm new to this, so your video is super helpful!!
@JimmyLewisMows 3 жыл бұрын
Glad it was helpful!
@shion_lwn 3 жыл бұрын
@@JimmyLewisMows Quick question..I'm so new to this and trying to figure out which parts I would need to fit my sprayer wand while watching your video and searching online.. you said 1/2" for the quick connect and adapter. Links of all the product show 1/4". I am embarrassed that I'm so confused.. did you mean 1/2" for the diameter ? is 1/4" thread pitch? (it's so obvious I'm so new lol) I just don't want to buy bunch of parts and all end up having wrong size :-S thank you..!
@MrCoiledcobra 2 жыл бұрын
Video is a Huge help !! Thank you brother
@TheLawnSensei 4 жыл бұрын
That is a serious tip set up! Thanks for the video
@JimmyLewisMows 4 жыл бұрын
Thanks for watching!
@TheJosa007 2 жыл бұрын
Thank you for taking the time
@andreadarrar5540 2 жыл бұрын
Very helpful!! Thank you!
@fredcurrier5912 3 жыл бұрын
I've got a My4Sons sprayer which has metric threads. Boy, do I love the quick connect idea though!!!
@briangallant5973 4 жыл бұрын
Found them Jimmy! Good video!
@milenstoimenov9532 4 жыл бұрын
To reduce drift for foliar (you are making clouds!) and if you can keep up the pace and have 60psi go to XR11006. I love it. For soil ramp up as well to AIXR11005. It extra coarse will penetrate better the canopy. Both will improve you app time. A middle ground is the turbo jets or even TT(twin turbo).
@JimmyLewisMows 4 жыл бұрын
Thanks, I'll look into those, too!
@YardGuy 4 жыл бұрын
Nice tips Brah.
@JimmyLewisMows 4 жыл бұрын
😎
@marionburgess5957 2 жыл бұрын
Thank you for the clarification!!!!!
@John-if8sx 2 жыл бұрын
Thanks for the Vid. I'm looking for some good aftermarket nozzels for a new sprayer I have arriving soon.
@jamzach4 4 жыл бұрын
Nice ! Thx Jimmy
@TheEnvelopeOZ 2 жыл бұрын
Ah thanks Jimmo mate, this helped
@ericstinnett9182 2 жыл бұрын
Great videos did you recalibrate your flow zone when you use the TJs compared to the other one If yes what was the difference in gallon per minute? Thanks
@richardmarino7720 2 жыл бұрын
Very helpful thank you
@BayouBeard 3 жыл бұрын
Just picked up the FlowZone Cylclone 2.5 and really appreciate this information. I'm stuck between the XR11003 (Blue) and the XR11004 (Red) TeeJet nozzles. I want to stay as close to 1 gallon per 1000 square feet at a normal (slow) walking pace. For chelated iron and urea applications, is it better to have a fine drop size or a medium drop size?
@trevormuggeridge4560 4 жыл бұрын
First Aussie 😁. Great tip. 😎👍👍
@BigBeardedBubba Жыл бұрын
If you like the pattern of the XR8004VS (XR= extended range) you can also get it in a TP8004EVS (even fan set up for perfectly even coverage of 20” at 20” above the ground) or you can get it as DG8004VS (drift guard) for the same 80 degree fan but with larger droplets to minimize drift) Basically if you hold any of these 22-24” above the turf you can follow your mower stripes (20” for you reel guys) It’s hard to believe what a difference a decent tip vs Chinese econo-plastic can make. I just upgraded this pre-season!
@troyhenry3267 Жыл бұрын
jIMMY what quick disconnect do you need to buy to connect to the end of your sprayer so the QD plug goes into it?
@troyhenry3267 2 ай бұрын
Hello Jimmy, I may be purchasing the Petra HD3000 (3 GAL SPRAYER) from Amazon soon, and would like to upgrade to the TEEJET 110° fan nozzle tip, what would you recommend or suggest i need to buy in order for this tip to fit into an adapter that goes into the OEM wand ? thanks,
@chuckhodges9227 3 жыл бұрын
I want to see if this product is useful on grass fires. Using dawn dish soap or fireice by gel tec as an additive to the water should work well. I'm considering adding this to my gear.
@TheLawnWhisperer 4 жыл бұрын
Hey, my tips look a lot like your tips!
@JimmyLewisMows 4 жыл бұрын
Same tips?! Let's be friends!! 😂
@erf601 3 жыл бұрын
Which would you use for a tenacity application
@btrook1981 4 жыл бұрын
Nice tip tips
@ottyee4886 2 жыл бұрын
Great video, can I get a list of all the updated parts?
@JamesDean53333 3 жыл бұрын
Very nice! I’m assuming a pressure regulator to stop the drips between sprays?
@robguilfoil2470 2 жыл бұрын
Try TeeJet QJT8360-NYB pressure regulating nozzle body and cap QJ8360-NYB.
@troyhenry3267 Жыл бұрын
JIMMy thanks for the updated links. my only confusion is how the pieces once put together fit onto the wand itself ? you didn't go over that piece with us... can you do a short video on how to connect the adapter pieces to the wand end? I'm thinking of buying the Sprayers' Plus YT25E 2 gallon sprayer, Do you think this quick disconnect TEEJET nozzle setup would fit this sprayer ??
@user-xm9pi1fy5j 3 ай бұрын
Same question. I must have missed something:)
@sebumgold3108 5 ай бұрын
Do the strainers bypass the need for a gasket, or did you forego the gasket by mistake?
@jimmymullins3063 Жыл бұрын
Is there an adapter/ fitting that will attach to a pressure washer gun that adapts down to a 3/8 barbed nipple to connect my gun to the backpack sprayer?
@aarce8819 2 жыл бұрын
Can teejet nozzles be used for my Milwaukee backpack sprayer? If I can, where is the link to buy all the parts I need?
@samwimpy2600 3 ай бұрын
Granted, your teejet quick connect set-up is for your Flowzone sprayer. Would these parts also work on a Petra Tools battery powered backpack sprayer? I assume as long as the connection sizes are the same it would work?
@Legendary_UA 4 жыл бұрын
Have you tried Pete Denny's nozzles?
@patrickt.7338 2 жыл бұрын
Hey Jimmy… which TeeJet would you recommend for fungicide applications with flowzone 2.5v? Amd which of the five settings do you use with said Teejet tip? Thanks
@JimmyLewisMows 2 жыл бұрын
Hey Patrick. I would go for a finer mist producing tip for fungicides. Settings depends entirely what's comfortable for you.
@Airstreamgene 2 жыл бұрын
Great video Jimmy. You didn’t mention o-rings. What o-rings or gaskets do you use for the threaded quick connect end and for the TeeJet tips? Thanks
@Airstreamgene 2 жыл бұрын
I'll reply to my own question: Found out you do not need any rubber gasket, o-ring, or washers for either the quik-connect threaded end or for the TeeJet nozzle threaded end. A washer is available from SpraySmarter for about $4 plus $9 something for delivery...no thanks. The part number is CP5871-BU. You must use a different washer if you use a quick-connect quarter turn TeeJet cap which I don't have. If you do add a washer and the filter mentioned there is not much thread left for the cap. With no washer the tip does not leak. The stainless steel quick connect does drip a bit, but a with few wraps of teflon tape...no drip. All the parts Jimmy mentioned in his video work great...Northern Tool is slow to ship and I think the same SS quik-connects are on Amazon for half the price...SpraySmarter ships really quick and customer service is where I got all my info..Hope this all helps.
@johndabeast7 Жыл бұрын
@@Airstreamgene Thank you for replying to your own comment. I was wondering if this was necessary and not having to spend $4 each is great news.
@drewrobinson36 3 жыл бұрын
How do you connect the handle to the hose line from the sprayer ?
@jamesfinnegan3154 Жыл бұрын
I don't understand how the elbow piece is working. the you said you had 1/4 inch elbow fitted into the 1/2 female quick connect. that 45 degree elbow is not fitting into my quick connect nozzle.
@raymondferreri3151 2 жыл бұрын
Very well presented. Any thoughts about My4Sons M4 sprayer¿
@JimmyLewisMows 2 жыл бұрын
Great sprayer. Comes with way too many unnecessary accessories though.
@mikeparker7895 2 жыл бұрын
What have you found to be the benefits of the teejet vs the standard green or silver tip from flowzone? I own a pest control company and I'm curious to know the difference
@JimmyLewisMows 2 жыл бұрын
The biggest benefits for me are the variability of flow rates and spray patterns, as well as the ability to connect them with elbow fittings to the spray shaft for better comfort. I should note that I use these tips to spray products on my lawn. When I'm spraying pest control, or spot spraying weeds in my lawn, I use the standard green tip.
@tausnowboarder2142 2 жыл бұрын
Do you need an O ring to go inside of the cap and between the nozzle and 45? Or does the filter also serve as the O ring for a better seal? If not using a filter do you need an O ring?
@JimmyLewisMows 2 жыл бұрын
I do have an o ring inside the cap. Always handy to keep them around just in case.
@ReefMimic 3 жыл бұрын
I’m finding that the filter in the nozzle clogs fast along with the flow zone filter it clogs fast . This is especially true for all N-ext products. You have use a metal coffee screen to filter it before adding it to flow zone and remove nozzle filter.
@JimmyLewisMows 3 жыл бұрын
How is your dilution when you use the products? I haven't had any clogging issues with this setup, and I've run some pretty thick mixes through it. Curious to know your experience.
@davidthreegun5278 2 жыл бұрын
I use this setup, but turn the 45 up instead of down and hold wand at a 45. This projects spray level out in front of you and keeps it off your legs and feet.
@glokuta 4 жыл бұрын
Do you have any other videos where you showcase the Flowzone and your sprayer components/upgrades. I would love to see the female quick connect and determine parts I need to modify my M4 sprayer to accept quick disconnects.
@JimmyLewisMows 4 жыл бұрын
This is my first impressions video: kzfaq.info/get/bejne/ap6Bg816m7nMlnU.html Should have more content coming soon.
@fredcurrier5912 3 жыл бұрын
glokuta, any luck modifying the My4Sons? I'm in the process of upgrading my tips now.
@grega2378 3 жыл бұрын
Great tip! You mentioned that the quick connect was 1/2" female threads. It looks like 1/4" though. Am I seeing it wrong. (Want to make sure I order the right size) thank you
@JimmyLewisMows 3 жыл бұрын
You can order the whole setup straight from flowzone now. Link is in the description.
@ayy1n 4 жыл бұрын
😎✌️💪
@chrisholland7184 4 жыл бұрын
I’ve got a Strom which is almost the same as the flow zone. It’s got a high and low flow option. I’m assuming running these tips on low?
@JimmyLewisMows 4 жыл бұрын
Strom and Flowzone are produced by the same manufacturer. This is the variable speed model. I typically run it on the higher end of the dial.
@chrisholland7184 4 жыл бұрын
Jimmy Lewis Thanks man!
@nayan5522 3 жыл бұрын
Hi Jiimmy, Which tip would you use for Pre/post emergent ?
@JimmyLewisMows 3 жыл бұрын
I would use the higher flow/bigger droplet one. You want a tip that produces droplets that will get to the soil and not sit on the grass blades.
@nayan5522 3 жыл бұрын
@@JimmyLewisMows thank you! Love the videos!
@tompeterson7917 3 жыл бұрын
This teejet setup is confusing, but this video sure helps. One question regarding that Flowzone quick connect adapter link, would that setup for $12.99 replace your other links with the smaller red teejet nozzle, quick connect coupler from Northern Tool, the 45 deg nozzle adapt, and the teejet cap (locking nut)? Assuming this Flowzone allows for swapping of other tips? Just not sure about the filter/strainer if that's built in or could be added. TIA.
@JimmyLewisMows 3 жыл бұрын
Hey Tom. Great questions. The flowzone assembly gives you everything you need except the teejet nozzles. I'm not sure about the filter part of it yet. I have some on the way and will be sure to cover them in an upcoming video.
@tompeterson7917 3 жыл бұрын
@@JimmyLewisMows Hey Jimmy, thanks for the quick reply. I went to order the flowzone assembly but backed out cuz the shipping was $19.00 to WI! So I'm trying to piece it together with the other individual links on this video. Thanks again!
@JimmyLewisMows 3 жыл бұрын
Hey Tom, just heard back from my contact at Flowzone, and they changed up their shipping strategy for the adapter to USPS flat rate. Will be significantly cheaper on shipping now.
@shane6002 4 жыл бұрын
Could you use 1/2 inch male quick connect with a locking collar to cut out that bend piece in the middle
@JimmyLewisMows 4 жыл бұрын
Probably. I like the bent piece because it allows you to hold the wand out in front of you naturally and the sprayer is aiming right at the ground.
@shane6002 4 жыл бұрын
@@JimmyLewisMows good thinking as I look at my manual pump Sprayer I see an elbow on that
@316thgenss8 3 жыл бұрын
Home Depot link in description is incorrect. The link is for the male adapter and the one needed is female. If you look at the other adapter link and compare it to the HD one you'll see what I mean. I just bought a 1/4" female barrel adapter threded at both ends and it works now.
@JimmyLewisMows 3 жыл бұрын
Sorry about that. I've updated the link for the female adapter.
@nedg3740 4 жыл бұрын
I think Allyn is into the longer tips. Not that theres anything wrong with that.
@tomhigbee5308 4 жыл бұрын
Great video, but where can your subscribers get that Toro hat? Thanks, Tom
@JimmyLewisMows 4 жыл бұрын
Thanks Tom. I got the hat at the GIE expo in Louisville last year.
@tomhigbee5308 4 жыл бұрын
That's probably the only way to get one. They would sell a ton of them if they put them on their website. Thanks, Tom
@thejarrod123 4 жыл бұрын
I orders a flow zone last night. Hope it comes in time for early fall applications
@dronemaddness5148 4 жыл бұрын
On the quick disconnect, can you get that at Lowes or Home depot??
@JimmyLewisMows 4 жыл бұрын
Not sure. That is definitely the most expensive item, though. So it might be worth checking. If I can find one, I'll update the link.
@condorusa7258 4 жыл бұрын
@@JimmyLewisMows www.fzspray.com/online-store/Quick-Connect-to-11-16-Threaded-Female-Adapter-p113642474
@JimmyLewisMows 4 жыл бұрын
@Condor USA Thanks for this. I think the idea is to find it locally and save on shipping. With the quick connect adapter that I have linked, and this one too, shipping costs as much as the item 😢
@dronemaddness5148 4 жыл бұрын
I have the quick disconnect with me now. Im going to see if I can fine it at "homedepot" or "house of hose".
@dronemaddness5148 4 жыл бұрын
Well I found the item at homedepot. It's in the Power Washer ile. SKU# is 719-874. The cost is $10.00 but also includes the female quick disconnect as well. I will send a pic to Jimmy to share on his YT channel. 😁
@jeremyespinoza279 2 жыл бұрын
What products are considered a foilar application?
@JimmyLewisMows 2 жыл бұрын
Anything that needs to be absorbed through the leaf blades of the grass.
@TheAleman03 2 жыл бұрын
Where can i buy the elbow piece and the quick connector
@JimmyLewisMows 2 жыл бұрын
There are links in the description of this video.
@troyhenry3267 Жыл бұрын
The link for the northern tool quick disconnect doesn't take you to the actual specific product.
@jayward6524 3 жыл бұрын
What's the link please?
@brianyoung3651 3 жыл бұрын
Can you please do an updated parts list. I got all the parts from your lost and it doesnt work. I got the 1/2"-1/4" 45° and 1/4 quick connect and it leaks like crazy and doesnt fit well.
@ReefMimic 3 жыл бұрын
Use plumbers white tape on threads
@robrabachuk750 3 жыл бұрын
The adapter you linked to Home Depot is the wrong one. We need a female end and the one you show has a threaded male end. Am I allowed to say that anymore? I really need to know where to get that threaded female to quick disconnect adapter.
@JimmyLewisMows 3 жыл бұрын
Hey Rob, sorry about that. I've updated the link. Let me know if it's not working. Thanks for the heads up.
@robrabachuk750 3 жыл бұрын
@@JimmyLewisMows well that was quick. Link is working. Thanks for the great content, love the channel. Have a great weekend.
@briangallant5973 4 жыл бұрын
Where are the links? I’m using an IPad.
@loganc1839 Жыл бұрын
I ordered everything in this video and it literally does not fit my 40v kobalt sprayer. This is so frustrating constantly waiting on parts just to use the damn thing and then they don’t even work.. what gives? My plastic curved piece isn’t the same sizes as yours and I used your link?!
@Mike--K Жыл бұрын
Why would you think parts for a Flowzone Typhoon sprayer would be compatible with a Kobalt sprayer? The lances are completely different.
@loganc1839 Жыл бұрын
@@Mike--K How am i suppose to know that? This video says to outfit your sprayer everyone saying majority of sprayers are the same? Couldn't find anything on the kobalt so i sold it and got the yard mastery
@hshpegel 3 жыл бұрын
Hi Jimmy, thanks for the helpful video. Here is a link to the tip-adapter that I found--www.amazon.com/gp/product/B07RHK7HK2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
@jerseylife8701 3 жыл бұрын
Thanks for the tip! Pun intended
@dronemaddness5148 4 жыл бұрын
#1 First
@nedg3740 4 жыл бұрын
Too slow
@dronemaddness5148 4 жыл бұрын
@@nedg3740 You must be really board to watch this.......😴
@nedg3740 4 жыл бұрын
@@dronemaddness5148 lol. Board
@ReefMimic 3 жыл бұрын
Your Home Depot link shows a male quick disconnect and not the female threaded one. 3/4. Generally all the pressure washer fittings tend to be 3/8. Hard to find the 3/4 fittings. I ended up buying the one in your link but it’s not correct. The 45 degree body adapter you linked has a 1/4 inlet and 1/2 outlet . Not 1/2 on both sides. Although the do make them
@brianyoung3651 3 жыл бұрын
I just bought 2 different adapters a 3/8 and 1/4. 1/4 seems to small and to much play when plugging in. 3/8 has a different connector end. Maybe I have an air compressor one? Anyway what would be best to get?
@316thgenss8 3 жыл бұрын
I did the same thing.. Got the one in the link which has the male adapter when you really need the female. I just used a brass 1/4" female adapter between the two and it worked out fine though.
@nedg3740 4 жыл бұрын
Never knew the SLC area got such high heat.
@JimmyLewisMows 4 жыл бұрын
Yeah we don't get much higher than 100 typically, but it gets pretty warm.
@dronemaddness5148 4 жыл бұрын
Technically, its a desert here. Its a very dry heat.
@DRK_BBQ 4 жыл бұрын
I was actually first, I don't care what the other comments say. There's grass on your 4K face
@JimmyLewisMows 4 жыл бұрын
Shot the video in 4K solely for the purpose of people being able to distinguish that as grass and not a booger 😉
@erf601 3 жыл бұрын
Which tip
@tazblink 4 жыл бұрын
I don't think that is a 1/2" female it looks like a 1/4" on the quick connect.
@nedg3740 4 жыл бұрын
1?
@JimmyLewisMows 4 жыл бұрын
Never question it.
@jaymetheaccountant 4 жыл бұрын
Fiiiiiirst
@nedg3740 4 жыл бұрын
Too slow
@jaymetheaccountant 4 жыл бұрын
@@nedg3740 Damn you - I had the phone in my hand! Prolly standing right next to Jimmy aren't you lol
@nedg3740 4 жыл бұрын
@@jaymetheaccountant i was actually watching a connor vid when it popped up.
@ryan-gf5fv 2 жыл бұрын
Is that actually how you spray man?🤔 you’re kidding right? Wave the wand back and forth, with the tip faced the other direction. That’s terrible information for out newbies. 😅
@raybaker8653 2 ай бұрын
I’m failing to see the part where he waves the want back and forth.
@troyhenry3267 Жыл бұрын
The link for the northern tool quick disconnect doesn't take you to the actual specific product.
@JimmyLewisMows Жыл бұрын
Sorry about that! Thanks for letting me know. I've updated the link.
The Lawngineer
Рет қаралды 26 М.
Fabiosa Best Lifehacks
Рет қаралды 38 МЛН
Eater Straw Hat
Рет қаралды 15 МЛН
Pest Geek Podcast Pest Control Training
Рет қаралды 23 М.
Prevent sprayer drift / evaporation with a TeeJet sprayer tip(upgrade your backpack sprayer for $10)
Next Level DIY
Рет қаралды 15 М.
Arslan khan_007
Рет қаралды 30 МЛН
Santi Oficial
Рет қаралды 4,2 МЛН
BigXep. Канал озвучки
Рет қаралды 1,7 МЛН