Option 2, switch to metric. I switched a few years back and don’t regret it one bit!
@shanethomas12024 жыл бұрын
Just came down here to see if I needed to make the metric comment but it's okay you and a heap of others beat me to it... I don't understand America's love of imperial. "Foot Inches per freedom eagle"
@Foureyes.Furniture4 жыл бұрын
Yes, many have and will make that comment. I admit it's a better system. So as soon as my country makes it easier to switch I'll be glad to. That said. The problems or topics in this video didn't have a lot to do with metric vs imperial. For example. If you subtract 3/8" or 9.525mm from a gap...you'll end up with a panel that is too small.
@shanethomas12024 жыл бұрын
@@Foureyes.Furniture correct for sure, although there does seem to be a lot of measurements flying in this video it is simple. But important. Mostly I like your comment near the end, it's not that big of a change to anyone else. But it was important to you and your partner. You live there and see it every day. You'll notice a mistake or a bad job and be annoyed by it. This simple change easily takes one flaw out of your daily routine.
@brazwewn4 жыл бұрын
It’s funny, the US has already switched to metric and you don’t know it. All measurements are based off official objects that are, pause for dramatic effect, in metric. All rulers produced in the US are converted from metric to imperial. It is also a law that anyone can switch to metric if they want, but they are not mandated. So, your country, mine too, has technically already switched. I will await a video of you buying all new rulers. 😂
@marknahabedian18034 жыл бұрын
I use imperial instead of metric for woodworking because it's easier in imperial to divide a measurement by 2 and not need to remember an extra digit when I do. Sometimes I need to work in metric or both because if whatever parts and tools I'm using for a given project. Also, at the scale of furniture making, the foot seems more like the right size to be thinking in than millimeters, centimeters or meters. I don't think I've heard or seen a measurement given in decimeters in my lifetime. There's no need to be pedantic and closed minded about measurement systems. I expect most of you metric advocates don't measure room temperature in degrees Kelvin.
@juhakoskinen2128 Жыл бұрын
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzfaq.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
@genelomas3324 жыл бұрын
I feel Chris needs to invest in a metric tape measure.. In fact, I CHALLENGE him to do a video in JUST metric.. :D Being Australian, It's metric here, but I fully understand the Imperial system, and even talk in in sometimes, but I almost got a migraine (my eye actually started to twitch a bit) listening to Chris try and work out the fractions in his head, by talking them out loud.. 6 and 3 quarters inches, plus an inch, minus 3 8ths.. gahhrghhgraAHH!! *stroke out* Metric is the only way to go, RARELY do you need to go into half millimeters in woodwork.. So, the above mess would become (yes I'm rounding for clarity) 172mm plus 25 = 197mm, less 10mm = 187mm. cut. No messy fractions, whole number calculations, and the entire system is Base 10 - you can do metric on your fingers..!
@Foureyes.Furniture4 жыл бұрын
I admit it's a better system. So as soon as my country makes it easier to switch I'll be glad to. That said. The problems or topics in this video didn't have a lot to do with metric vs imperial. For example. If you subtract 3/8" or 9.525mm from a gap...you'll end up with a panel that is too small.
@thecrazyisreal4 жыл бұрын
tell me how to divide 10 cm into three equal parts.
@MatiuPirihimana4 жыл бұрын
@@thecrazyisreal tell me how to cut 10 inches into three even pieces.
@andrewdavis90214 жыл бұрын
@@thecrazyisreal sure. 10cm is 100mm. So divide by 3 = 33.333333 I have gone to a millionth of a millimeter (you tell me what that is as a fraction). But for wood working we would never go to that accuracy level.
@MattNZ19754 жыл бұрын
@W B I’ve just checked my imperial drill bit set and I can’t seem to find a 1/3” or a 5/6” drill bit anywhere??? So you have the same issue if you divide 10 inches into thirds also.
@user-ld9sd8tp5q4 жыл бұрын
love the comparatively more casual style of this vid right when we could all use some people to hang out with. hit the spot - thanks
@Foureyes.Furniture4 жыл бұрын
Appreciate it! That was kind of the idea. Also fun to do something different :)
@Larcenycrook4 жыл бұрын
@@Foureyes.Furniture this might be the best vibe video you've ever done...that's extreme but...
@naterapp78814 жыл бұрын
Thought you guys would like to know that my kid’s high school woodworking class had to watch your videos as homework while they are all out of school. Keep up the great work!
@Foureyes.Furniture4 жыл бұрын
That's cool...but has me second guessing some of the foolery we put into this one :)
@3x3CustomTamar4 жыл бұрын
I felt like I was hanging out with you guys on this one. Good job 👍
@katieourmatie82504 жыл бұрын
I love your usual chill voiceovers, but this is also such a fun change of pace, kinda like getting to see behind the scenes :D
@haydenbird83064 жыл бұрын
“I open all my cabinets with a dead blow hammer” hahahaha Cheers guys fun vid to watch and just maybe given me the confidence to give it a go on my kitchen cabinets Stay safe,
@Foureyes.Furniture4 жыл бұрын
thought that was the perfect line to end it on :)
@841tl4 жыл бұрын
When I'm using a miter saw like that and want to cut consistent length pieces I cut one piece and then use the built in clamp to hold that in place. Then that becomes your new fence and you can flush up the ends of that with the next piece and cut it exactly the same. It will also serve as a backing piece to help with blowout.
@scottvanderhaeghen20004 жыл бұрын
Never seen Sandlot!?? You're killing me, Smalls!!!
4 жыл бұрын
when i see you doing the math, i'm so glad i use metric. also are your lights broken?
@Foureyes.Furniture4 жыл бұрын
Just off...I only like about half of them on. It might look dimmer than you're used to seeing me because Shaun was using his camera (a diff camera)
@OVHabitats2 ай бұрын
Learning while laughing....What a concept. Works for me.
@robertbailey24584 жыл бұрын
We need more of these vids in this style, there so good!!! 🔥
@Foureyes.Furniture4 жыл бұрын
Thanks Robert. They are definitely fun to make :)
@joshuacoutinho3354 жыл бұрын
Chris I don’t know if you’ll see this but I haven’t been here in a while and seeing you in this “live” type of dynamic is so great as opposed to the older videos where it was only voiceover. Please keep making great videos and more importantly, great projects!
@michaelhlinka944 жыл бұрын
I know i'm really late to the party for this one, but I just got to say this video was one of my favorites. Don't get me wrong I love the cinematic, relaxing shots where it seems like everything just flows together perfectly, but it's really nice seeing some of the complications that come with any project! Also the banter was really great too. "you know those Reese's commercials, there's no wrong way to eat a Reese's? Those were fun'
@nal13nal134 жыл бұрын
When your square cost more than the miter saw you're squaring up.
@njbaquatics48273 жыл бұрын
Don’t know how I missed this one when you originally did it. Absolutely love that you guys come across as a real good laugh in the workplace definitely think you should do more like this
@Sjoholm134 жыл бұрын
I wanted to say thank you. Your videos always inspire and motivate me to become better at woodworking. I was working on a project yesterday and everything just came unraveled during the course of the day. Long story short; inconsistent tools can be extremely disheartening. Come bedtime I was pretty irritated still, but getting to "hang out" with you guys for a while blew all my troubles away. I really needed that. So, you know, thanks.
@Foureyes.Furniture4 жыл бұрын
Thanks man... appreciate the kind words! Hopefully the project is salvageable. I’m sure it will be
@joseescoto9069 Жыл бұрын
The mess ups and changing direction gave me anxiety. The exact same anxiety that I go through when I’m making something. Reassuring to know that others go through it too
@davido14904 жыл бұрын
Similarly to another commenter, there are usually holes in the fence of miter saws that you can use to screw a long 3" wide board to the fence and then use as an auxiliary fence to clamp a stop block. This was my setup for awhile before I got a table saw and it works fairly well for repeatable cuts
@ianjamesevans4 жыл бұрын
I come to the comment section for the endlessly interesting metric system comments. Keep 'em coming, y'all!
@JackStolz4 жыл бұрын
Chris I don't know if I relate more to a person on this planet than you. Being a silly dude that is a huge Nintendo fan, that makes relaxing content and enjoys the process of things, I feel right at home here on your channel. Thanks for everything in these wacky times.
@Foureyes.Furniture4 жыл бұрын
That is basically me in a nutshell :)
@sullivanwagner19964 жыл бұрын
I would like to see more of these kind of raw videos, I really enjoyed this one
@Foureyes.Furniture4 жыл бұрын
Thanks Sullivan :)
@errolpereira82924 жыл бұрын
Like the longer format videos as well. Picked up so much in this video. Thanks! Stay safe
@JesusArellano4 жыл бұрын
I love this type of video, please do more and keep them this long
@rolandgdean4 жыл бұрын
You two should have a family video for quarantine. Bring family members in to help with a simple build so we can get to know the people in your lives.
@craigchingren-hamann97004 жыл бұрын
WHAT... You've never seen the Sandlot?!? OMG man.. you're killing me smalls!!!
@timpa822 жыл бұрын
This is so interesting that imperial is still used. Making everything so hard for no reason.
@smithssillyscience41564 жыл бұрын
Also had great results with the Kreg Ripcut and my circular saw. Again in budget and accurate.
@smithssillyscience41564 жыл бұрын
I made some repeatable cuts with my $100 saw from Harbor Freight. I just used a miter sled and a stop block. It worked great and was easily in budget for a beginner DIYer like myself.
@dougywilson29114 жыл бұрын
Viewer of 2 years to the channel. Probably never commented. But I much prefer this video than your usual vids. Way more enjoyable getting to know you Chris than the highly edited beautiful Chrispy vids we’re so use too. To be honest. I love your other vids. I like this one more for the above reasons.
@Foureyes.Furniture4 жыл бұрын
Thanks Douglas. It was definitely fun to do something new. If suspect we’ll mix it up moving forward. With everybody social distancing, I thought something with a bit more of a “hang out” vibe would be enjoyed. 😊
@dougywilson29114 жыл бұрын
Really appreciate your reply. And your creativity. I particularly like the “outta the box” kinda builds like the crayon projects and technology inspired or melded furniture. Keep up the great work.
@Foureyes.Furniture4 жыл бұрын
Thanks! Yeah, switching it up from time to time is a must. Keeps it interesting and let’s you develop new skills
@woodshop74874 жыл бұрын
Fantastic build gents. Love the interaction and chatting added a fantastic entertaining element, really enjoyed that. 👍👍👍
@Wordsnwood4 жыл бұрын
I've never seen any of those movies either, Chris.
@Foureyes.Furniture4 жыл бұрын
my dude :)
@withthesehands57994 жыл бұрын
You guys seem to be having a blast
@goldenbois24874 жыл бұрын
hi Chris. Im a big fan. Been watching both your projects and Shawn’s. Both of you are, in one way or another, my mentors.
@wadsface4 жыл бұрын
Loved the format, others mentioned this seemed like a great "hangout" we all need right now. Keep it up, stay safe!
@Foureyes.Furniture4 жыл бұрын
Thanks Ben. Appreciate it. And most definitely. I’ve got a tight circle of good people. But definitely missing my friends.
@millerunruh50234 жыл бұрын
The shoe collection is fire
@Foureyes.Furniture4 жыл бұрын
Thanks :)
@krisrd Жыл бұрын
Being British, watching this video gave me a whole new appreciation for the metric system 😳
@TotalBoat4 жыл бұрын
The Sandlot is a classic movie. Great time to check it off the list.
@unitwoodworking54034 жыл бұрын
The color match and mood is modern, simple and awesome. Thanks for your tips and fun and interesting video.
@Foureyes.Furniture4 жыл бұрын
Thanks! Appreciate it. 😊
@unitwoodworking54034 жыл бұрын
@@Foureyes.Furniture You're welcome. Take care.
@shawnacapp41284 жыл бұрын
You guys made me feel so much better about my own skills. ;) I had similar issues- double and triple checking measurements when I recently made rail and stile doors for the first time. They were easier than I had thought! Thanks guys - always informational and entertaining!
@Foureyes.Furniture4 жыл бұрын
Thanks Shawna...we are definitely full of mistake making
@jaredthipthorpe16544 жыл бұрын
Is that an aj1 push block... I love it. Keep up the great work
@vilmarmoccelin4 жыл бұрын
The math on 1/8 and 1/16s broken dimensions is harder??? Metric to the rescue! I love to watch a lot of you North American makers, but your dimensions system make me crazy! Fractions all the time, crazy math when adding different base fractions: 3 1/16 + 4 1/2 + 1/8... Crazy stuff... So I learn to just ignore the dimensions and try to just get the big picture. We "metric rest of the world" just add. 1mm is measurable with simple tools and precise enough for a lot of things (like woodworking) at the same time. You have control over the dimensions? Centimeter is a precise enough to a design phase without using fractions (or in our case the millimeter). In the very precise world you don't need to change the way you calculate, no tenths, hundreds and thousands of an inch (in base ten) mixed with fractions, just more zeros between the comma and the number. And if you have mm and cm mixed in the project in different tolerance parts? No worries: 50cm + 23mm + 2,5cm don't confuse since everybody use base 10 math in day to day tasks and learn to move decimal cases around when needed (like with money). Just a rant... Still love the content, just hate the measuring system.
@Foureyes.Furniture4 жыл бұрын
I admit it's a better system. So as soon as my country makes it easier to switch I'll be glad to. That said. The problems or topics in this video didn't have a lot to do with metric vs imperial. For example. If you subtract 3/8" or 9.525mm from a gap...you'll end up with a panel that is too small.
@vilmarmoccelin4 жыл бұрын
I understand the difficult in the transition, but metric will never catch up in USA if everybody wait to be a more accessible thing. The ruler manufacturer will never sell metric rules if all the buyers waits to every rule be in metric (oversimplification in its worse!). Some channels are doing a thing that I think is a disservice for metric, telling that the plans are in both systems but showing metric dimensions in a simple conversion: 1" or 25,4mm... 1/8" or 3,18mm... It creates a sensation of complexity that doesn't exist... But the main reason of the metric will never catch up in USA is the fact that when the discussion start the argument that "it's better because it's our system" prevails in the comments... The "freedom unit", "Murica, duck yeah", etc... This is the main reason it will never change in my opinion, since any act towards metric is seen as almost an offense and an obvious reason that nobody in the maker scene (mainly KZfaqrs) not even try, since the backfire could be disastrous. And my comment was based on a part that you say in the middle of the video about the added complexity when you start to add lots of broken dimensions on the calculations, sorry for the off-topic and for any errors in the english and I wish you the best from a lock down Brazil!
@redcard30834 жыл бұрын
The door style is rail and stile. Great video guys.
@SpencleyDesignCo4 жыл бұрын
Loviing this video style guys! Keep up the great work!
@Foureyes.Furniture4 жыл бұрын
Thanks! Glad you enjoyed.
@breyleighgegelman43594 жыл бұрын
I liked how casual this was! Super fun video to watch!
@Foureyes.Furniture4 жыл бұрын
Glad you enjoyed! Thanks :)
@GeeDeeBird Жыл бұрын
Big Bang Theory was a great show. I didn't discover it until after it was off the air, but It's worth the watch.
@user-hd8ej8yx9p4 жыл бұрын
Comment section: metric! Home Depot: sorry, we don't have 19.05 mm plywood Me: goddamn it youtube!!
@stas_from_haisyn4 жыл бұрын
It's 18 mm, not even close to 3/4".
@genelomas3324 жыл бұрын
@@stas_from_haisyn dude, it's 40 thou off.. that's pretty much good enough for timber work.. ;)
@robertmoran98864 жыл бұрын
Terrific video and like the alternative door. When I was a cabinetmaker (before you were born) we would use spaceballs in the mortise to allow expansion and eliminate rattle.
@Foureyes.Furniture4 жыл бұрын
Now that movie i've seen :) JK, I've actually never heard of spaceballs as a "tool"
@robertmoran98864 жыл бұрын
It’s all about merchandising!
@DerekHauser4 жыл бұрын
I'm pretty sure this is a giant commercial for the metric system!
@gavinhillery31304 жыл бұрын
I too open all of my cabinets with dead blow hammers, Shaun.
@kjkuchma2 жыл бұрын
"Expert level" stream of consciousness video. Same conversations occurs in my head between "us."
@marcelw64404 жыл бұрын
Can't believe you haven't seen those classics!
@Foureyes.Furniture4 жыл бұрын
I guess I've got my quarantine work cut out for me
@anneoreilly49002 жыл бұрын
Total shop envy!
@savagetackle664 жыл бұрын
500k! Congrats bro!
@The42Joker4 жыл бұрын
“I open all my cabinets with a dead blow hammer” hahahaha 🤣🤪😜
@ohalloranpeter3 жыл бұрын
The metric system is so much easier and logical and would take all the thinking out of it. It's almost like there's a secret society keeping the metric system down. Or something.
@ryanmartens56674 жыл бұрын
I like the loose video style. Fun! Next fake trip to the home store, your 1 x 2's might only be 1 3/4" wide! Lol Keep up the good work!
@ggosbenton3 жыл бұрын
oh man... the metric system is so nice!
@z4zuse4 жыл бұрын
Love the struggle with the obfuscated metric system.
@deeranfoxworthy60694 жыл бұрын
I loved the animations and everything, very helpful! I would maybe label the parts that you're talking about in them. I don't mind googling what a rail, tenon or a style is, but it may be a bit easier to comprehend if labeled in the animation. I know you did mention that the vertical pieces are the styles, thank you for that!
@jeffforbes37724 жыл бұрын
Never seen The Sandlot??!!! You're killin' me Schmalz.
@caeeylots4 жыл бұрын
I like responsible shoppers!!!
@alsanova4 жыл бұрын
Metric all the way! Inches are waaaay too confusing, that hurt my brain! 😀🤪 Btw I like this style of the video 👍🙂
@CyrusHostetler3 жыл бұрын
Question: Why did you take off 3/8" on the doors? Couldnt you just take off like 1/8" for glue? Why so much room?
@user-hd8ej8yx9p4 жыл бұрын
i also put my left hand behind my back pushing the piece through the table saw
@garagemonkeysan4 жыл бұрын
Great video. Different style. Fronts turned out looking great. Mahalo for sharing! : )
@Foureyes.Furniture4 жыл бұрын
Thanks! Yes we are really pleased.
@christianjanes4 жыл бұрын
Really like the new style of video. Great work.
@zkahen4 жыл бұрын
Loved the sneakers in the wall at 1:04, i would love to see a sneaker showcase shelf or something like that, im looking for ideas to do one my self in my house. Love your work dude! keep up the great work.
@Foureyes.Furniture4 жыл бұрын
I did one a few months ago. Scroll back about 15-20 videos on my page and you’ll see it.
@zkahen4 жыл бұрын
@@Foureyes.Furniture ow don't know how I missed it, I'll check! Thanks!!
@WatchMeDIYIt4 жыл бұрын
Nice, Chris! I like the color. I’m going to try to update our vanity this summer, but probably just repainting it. 🤣
@Foureyes.Furniture4 жыл бұрын
Go for it!
@Larcenycrook4 жыл бұрын
really digging the handheld stuff guys
@Foureyes.Furniture4 жыл бұрын
Thanks Kyle.
@handymadness4 жыл бұрын
Love the format! Super fun and entertaining!
@kypass4 жыл бұрын
15:00 Brilliant!
@kylefisher4883 Жыл бұрын
I just watched the video about not needing a mitre saw lol!
@williamellis89934 жыл бұрын
Great video, Chris. It's a good thing you had Shaun there to keep you straight. As an aside, have you ever used Miller dowels? I always finish my panels before assembly for the same reason as you. You and Shaun stay safe and healthy. Bill
@Foureyes.Furniture4 жыл бұрын
I'm not familiar with miller dowels. I'll check them out
@ThomasKempDesign4 жыл бұрын
Do/would you ever router in the handles to makes them flush? It seems odd to have them sticking out the just slightly.
@Foureyes.Furniture4 жыл бұрын
I would on a piece of furniture. For these I just did it exactly as they were made
@marknahabedian18034 жыл бұрын
Bad News Bears? I love Big Bang Theory.
@Foureyes.Furniture4 жыл бұрын
I feel like I saw some iteration of Bad News Bears as a kid. Never watched big bang theory
@TheWindseed4 жыл бұрын
Base 10 on the left side of the decimal point, base 2 on the right side. What kind of show are you running over there guys!? :)
@kylecarson23954 жыл бұрын
What about the original door and drawer fronts made them not hold up so well (material, finish, construction method,...)? Also and I guess this is kind of the same question; why do you think these new door and drawer fronts will hold up better?
@williams152033 жыл бұрын
Can you make a modern front door. Maybe a pivot door? Or just a modern one
@appalachianmountaindesigns77134 жыл бұрын
Great video Chris excellent detail. I wasn't confused by your math 🤔 not sure what that really means. 🤣 thanks for sharing. Until next time. *Chris*
@Foureyes.Furniture4 жыл бұрын
it was easy math. It's just that Shaun's got no brains
@appalachianmountaindesigns77134 жыл бұрын
@@Foureyes.Furniture Good thing he's good with the camera. Lol jk Shaun
@laurenemilie20484 жыл бұрын
The black is dope But I kind of hoped you would change it up with a wood colour finish. But maybe that would totally clinch with the rest of the bathroom.
@Foureyes.Furniture4 жыл бұрын
Yeah...i'm sure all walnut would have looked sweet :)
@donaldpowell77624 жыл бұрын
I also open all my cabinets with dead blow hammers!
@Foureyes.Furniture4 жыл бұрын
The way to do it
@_thegrayman4 жыл бұрын
Fun edit 👍👍
@FredMcIntyre4 жыл бұрын
Awesome work Chris! 😃👍🏻👊🏻
@Foureyes.Furniture4 жыл бұрын
Thanks Fred
@Jermmz4 жыл бұрын
Hi Chris, very impressed by the quality of your creations and videos. Could you give us more details on the way you stain and finish your build to get that result. What kind of dye was this (Brand - Color) and what black poly do you use ? What is your process to apply it all ?
@novas29054 жыл бұрын
13:15 There's a comic for that, made by Adam Ellis!!
@hp_games934 жыл бұрын
Oh my lord, i love all those movies!! I cant believe he hasn't seen them!! I'm not sure how old y'all are but I'm 26 and I've seen all of them.
@Foureyes.Furniture4 жыл бұрын
We're older...prime age for these movies :)
@hp_games934 жыл бұрын
I think you guys are probably just 30-32, not too much older. :)
@andrewbrown81484 жыл бұрын
OMG, this was a great video, guys, and I laughed out loud several times~!! Love it~! I'm "a couple years" older than you two and recognized the names of the movies you named....from watching several of them with my kids. A few you'll have to look up..."Slap Shot" (hockey, obviously?), any of the "Bad News Bears" movies, and the original "Longest Yard"~! I'll bet Shaun's familiar. Maybe? Keep the great content coming~!!
@Foureyes.Furniture4 жыл бұрын
I’m familiar with all of those movies. I think bad news bears is the only I’ve seen. But I don’t remember much.
@lorismith88874 жыл бұрын
Now that I see you’re dying the wood I can see that MDF would never work for the finish you’ve selected. They look awesome!
@Foureyes.Furniture4 жыл бұрын
MDF is a thirsty material
@lorismith88874 жыл бұрын
Chris Salomone yes indeed and sometimes it sucks!
@vsmochent4 жыл бұрын
I thought Chris was listening something music or podcast but I realize he was talking with his friend. Hahahahahaha
@WalkaboutLifeVideos4 жыл бұрын
honest question, do you think this ended up more or less expensive than just buying doors and cabinet fronts? we really need to reface our kitchen cupboards before selling the house, but I can't justify doing any work when just buying somewhere might be drastically cheaper
@Foureyes.Furniture4 жыл бұрын
Definitely cheaper if you have all the tools. I'd say total cost was $60-80
@kapalupundu4 жыл бұрын
Thou shalt list featured coatings in the description aswell :) Cuz I liked that black satin whatsit...
@Foureyes.Furniture4 жыл бұрын
Black polyurethane by general finishes
@kapalupundu4 жыл бұрын
@@Foureyes.Furniture Thanks, dude! You're like the first youtuber in my entire internet career who actually replied )) Keep it gangsta )
@lorismith88874 жыл бұрын
I’ve become a pro and doors. I’ve found that MFF makes for a nice shaker style door.
@HybridWoodworks4 жыл бұрын
Have you ever considered buying a shaper? Seems like a lot of your operations could be simplified with one.
@JSeed473 жыл бұрын
ok so i need to come back and comment on this older one now that we've all been stuck inside for MONTHS. you watch any of the CLASSICS you missed out on growing up yet Chris!?
@Foureyes.Furniture3 жыл бұрын
haha...nope. I still haven't. Maybe when my kids get a little older, and Uncle Shaun get's them interested in hockey. Of course, keeping the kids attention while explaining the intricacies of icing might prove to be too difficult as they'll have to ignore the foul stench of doing it over my dead body.
@JSeed473 жыл бұрын
@@Foureyes.Furniture lolol
@arronnorton84572 жыл бұрын
What did you use as finnish ie to get the wood black and any lacquer or varnish etc looks very nice black great job
@seanoreilly36654 жыл бұрын
Nothing was wrong with the bathroom, except the cabinet fronts, and the toilet paper turned the wrong way!! 😡
@JSeed474 жыл бұрын
YOU MISSED SO MANY CLASSIC 90s kid Films! @.@ a*faints*