No video
My boat, the ALUMA-SKIFF hybrid Jon Boat and why it’s amazing at what it does
Рет қаралды 87,812
Күн бұрынI’m now offering licensed and Insured GUIDED TRIPS IN CHARESTON. Visit my website below for info and booking! Lets go! ⬇️
fishandsurfchs...
Do me a HUGE FAVOR and follow me on NEW Instagram " @FISHANDSURFCHS " here: / fishandsurfchs
Also Check out my TikTok that I was told I should make to post my shorts and other creative videos! @fishandsurfchs or click here: www.tiktok.com/@fishandsurfchs
Check out my Website to message for charters, surf lessons, media services, or just to chat!: dyemedia843.wi...
Connect with me on Instagram!: fishnsurfchs
Subscribe to the channel to keep up with the latest action going on around Charleston! Likes and comments/questions appreciatted!
Check out some fishing and surfing videos I make for this channel:
Latest surfing folly Washout videos found here: 🤘🏻🤙🏼
• August swell continues...
• Summer is ending - sur...
More of my latest FLY FISHING action in Charleston found here: 🤘🏻
• Make the most out of y...
• Perfect Summer day: LO...
• The time is near - The...
• 9 Fish 1 Flat - My bes...
Some of the Gear I use! (With Amazon kickback links that help this channel):
Gopro: amzn.to/3xfShDm
Mount: amzn.to/3HIr9Bs
DSLR: amzn.to/3cvR2X9
HiFi Mic: amzn.to/3x7sRaJ
20mm lense: amzn.to/3r4pEro
7-14 Vlog lense: amzn.to/3nBRA47
Battery grip: amzn.to/3HzZJOp
Drone: amzn.to/3FB7ce4
My soloshot: amzn.to/3x7t9OR
Paddleboard: amzn.to/30GEOIY
Spinning reel: amzn.to/32baXZi
Fly Tying Stand: amzn.to/30PB2Nl
@chiphill4856 Ай бұрын
Dude, I had a Lowe 1448 Jon w a 40hp yam 2-stroke. Decked bow and stern, poling platform, more. One of the best creek fishing boats I've ever had. Poles like a dream with one hand. Had it all around the harbor and creeks in Charleston. Hard to kill a Jon boat. Great for dropping anchors or cast nets, etc. Even had a duck hunting blind for it. Gigged out of it, fly fish in the grass, spin fish anywhere, shrimping, oystering, and more.
@gspdude7183 4 жыл бұрын
This video is making me want to turn mine into a rig like yours! Super simple yet super effective.
@FishandsurfChs 4 жыл бұрын
Yewww minimalism opens your eyes for sure
@brettbarley 4 жыл бұрын
That rig is sick! I wanna put a poling platform on my Jon boat so bad... I just need to quit fishing from it for a bit so I can do it haha.
@FishandsurfChs 4 жыл бұрын
Appreciate the kind words Brett! Definitely worth taking some time off to be able to creep in the shallows! We were up there a few weeks ago in Nags head was gonna hit ya up but we never made it down to Buxton. Looking for some surf reds on fly 🤘🏻keep slaying brudda
@brettbarley 4 жыл бұрын
@@FishandsurfChs Hit me up next time you're around! I fish all over the Island, so meeting up in Pea Island or something is a breeze. But if you want Drum in the surf... this fall is gonna be the ticket. they are thick as can be in the sound right now.
@FishandsurfChs 4 жыл бұрын
I’ll be up there a few times to skim and surf over the next few months. I’ll link up with you when I get some dates. Keep killin it dude 👊🏼
@mikemcelveen2973 3 жыл бұрын
Got a 1448 g3 and have fished out of it for 10 yrs. man I can drive this thing up a tree. Mostly fly fish in Beaufort SC. My balls are pancake shaped cause I take this thing out in 20mph winds 😯 Gotta love the jon boats. Love what you did with yours. Thanks!
@FishandsurfChs 3 жыл бұрын
The ole pancake ball wind eh? Hell yeah man it’s not meant for everyone. But thanks for dropping by the channel!
@chiphill4856 Ай бұрын
@@FishandsurfChspermanent back damage!
@ricky33183 2 жыл бұрын
I definitely want to build something very similar to this. The only problem would be getting it to fit in my backyard
@clearconcisecourteous9647 2 жыл бұрын
🤔🤔🤔... I thought that I had the same problem... Then I went to Home Depot... Bought: 4 ... galvanized fencing pipe... 4... corners... 2... heavy duty gate hindges Heavy duty Gate latch... 2... bags of Qwickset Concrete I then picked my spot between 2 existing solid healthy posts... re-enforced them with the galvanized poles set in concrete. Once dried... I added another hundred or so nails with the nailer to the pickets to reinforce them... then simply cut out that panel... laid on ground... then built a metal "gate" on top of the panel using the 4 corners strapping/ screwing it down to the 2x4s on the panel. Since my panels are so wide... I then added a "trailer-jack". Works great...👍🏾👍🏾👍🏾 Now have 2 boats in the backyard under carports that I built. Been running underground power back there...(75ft) for the batteries because I'm tired of dragging 150ft of extention cords...!!! You can do it... too...!!! 🙂😉👍🏾
@davidlewis9572 4 жыл бұрын
I fish out of a Starcraft 16 ft. Aluminum V. Center console ( homemade ) 40 Johnson. Fished out of Jon boats for 40 plus years. Keep it simple ...don’t need 60K boat . Set the hook brother
@FishandsurfChs 4 жыл бұрын
Freakin awesome! That’s all you need bro, keep em tight my man🤙🏼
@jason8689 4 жыл бұрын
Just picked up a 15 ft Jonny with a 40 Johnson on the back. Splashing it tomorrow so naturally watching a bunch of videos on them haha
@FishandsurfChs 4 жыл бұрын
@@jason8689 yewwww
@jason8689 4 жыл бұрын
@@FishandsurfChs annndd we almost sank.... Hole in the boat.. Heavy leak haha tough
@FishandsurfChs 4 жыл бұрын
@@jason8689 shit happens lol
@chrisz.9974 3 жыл бұрын
I’m wanting a jon just because I can keep it for a lifetime without much restoring since fiberglass and wood will eventually deteriorate.
@FishandsurfChs 3 жыл бұрын
Exactly. Not a bad plan
@GraceFennell 4 жыл бұрын
I like your accent and your editing is really good. Wow beautiful sunset. Oh i live in mt. Pleasant too!!
@MrJhchrist 3 жыл бұрын
FYI, lockwashers don't work, and can even make bolts more likely to come loose. Apparently they're holding up, but it'd be more secure if you took 'em out. Use locktite if you care, red is forever, blue is removable.
@FishandsurfChs 3 жыл бұрын
they've worked so far? The remaining ones I will put locktite on. thanks Mr. Christ for your insight !
@Dats_marius 4 күн бұрын
Throw some evo flooring on there my guy
@dgalvan529 4 жыл бұрын
Bro that’s a nice build but an even nicer outro! Just subscribed looking forward to watching your videos!
@FishandsurfChs 4 жыл бұрын
Yewwwwww good shit coming homie! Thanks for tagging along ! Subbed back
@dgalvan529 4 жыл бұрын
Fishing & Surfing Charleston, SC Thanks bro I appreciate that. Same here lol hopefully once all this covid is over with I can go fishing more often.
@FishandsurfChs 4 жыл бұрын
I have faith in you, get after it 🤘🏻
@FishinWithFelix 4 жыл бұрын
Just came across your channel from your Facebook post on Low county Kayak Anglers. Been looking for a mission specific, inexpensive boat. This may be the one. Appreciate you sharing with us man.
@FishandsurfChs 4 жыл бұрын
I think the phrase mission-specific is spot on my man, thanks for tuning in. Keep an eye out for new videos
@Wilcero 4 жыл бұрын
Man, I have a very similar set up. Nice to see! I added horse stall mats on the floor, makes it nice.
@FishandsurfChs 4 жыл бұрын
Horse stall mats?! Interesting
@Wilcero 4 жыл бұрын
Fishing & Surfing Charleston, SC yes sir, dampens sound and just makes it more comfy. Easy to clean too! Comes on a roll at the TSC cut to your size needs and is pretty cheap.
@FishandsurfChs 4 жыл бұрын
Ima look into that!
@gasstationsushi1999 3 жыл бұрын
Working on me a river jon for catfish and fly fishing. Love your setup
@FishandsurfChs 3 жыл бұрын
That’s dope! Thanks for watching man🤙🏼
@webassin 4 жыл бұрын
So sick! Was looking forward to this one
@FishandsurfChs 4 жыл бұрын
You were one of the ones who asked! Enjoy!
@thejohnboatfaithfishingand8078 2 ай бұрын
I realize this is an older video and hopefully you still keep up with the comments, but I'm interested in how you built the poling platform. Or, if you didn't build it yourself, where did you buy it? Thanks!
@FishandsurfChs 2 ай бұрын
Got it built in Georgetown SC
@thejohnboatfaithfishingand8078 2 ай бұрын
@@FishandsurfChs Thanks!
@chiphill4856 Ай бұрын
@@FishandsurfChswho built it? I need one just like it
@cscsharks 3 жыл бұрын
Love the Content man. I live and Fish in Charleston as well. Born and Raised on James Island.
@FishandsurfChs 3 жыл бұрын
Right on. I subbed you. im born and raised MTP. glad to have you along. new video this week!
@McHounds17 4 жыл бұрын
Great content. A few of my buddies and I are going fly fishing in Charleston this fall
@FishandsurfChs 4 жыл бұрын
It’s a great time in a magical place 🤘🏻🔥 follow along
@colin-me 8 ай бұрын
This is sick! I’m hoping to do something similar this spring. Did you try polling off a cooler in the or did you avoid that for the weight?
@user-km6pe5vs6v 3 ай бұрын
Do you use count counterweight in the bow when you’re on the poling platform?
@craigkatzenmiller2776 4 жыл бұрын
Awesome boat. I'm currently working from a kayak, but I'm hoping to someday invest in a motorized contraption. This broadens my horizon beyond Gheenoe. Thanks!
@FishandsurfChs 4 жыл бұрын
Yeahhhh buddy! Even the “Bote Rover” is a comparable step up from the kayak! Consider checking them out!
@craigkatzenmiller2776 4 жыл бұрын
Fishing & Surfing Charleston, SC That Bote looks pretty cool too. I’ve not seen those before. It kind of has a Solo Skiff vibe. Thanks for the recommendation! Really enjoying your channel-especially the redfish content!
@FishandsurfChs 4 жыл бұрын
Thanks bro! Follow along more coming soob
@user-km6pe5vs6v 3 ай бұрын
How do you find your boat poling / tracking from your poling platform ( nice Jon )
@drumminsonlive9199 6 ай бұрын
That looks exactly like my 1981 16 foot sea nymph to a T might be a clone.
@FishandsurfChs 6 ай бұрын
That’s awesome man
@Charlestonkayakandfishing 4 жыл бұрын
Let’s go fish I live in Summerville
@TwigNTimberFishingOutdoors 3 жыл бұрын
Hey brother! Sick kit! I head to NC/SC and shoot videos every summer. I’d love to get together to chase some reds/trout or whatever sometime!
@FishandsurfChs 3 жыл бұрын
Yeah man lemme know if you make it down to the 843
@TwigNTimberFishingOutdoors 3 жыл бұрын
@@FishandsurfChs Will do! Im on Oak Island at the moment
@FishandsurfChs 3 жыл бұрын
Nice man!
@TwigNTimberFishingOutdoors 3 жыл бұрын
@@FishandsurfChs Flat beach but found a few!
@user-qp2zj7lc8o 5 ай бұрын
Where can I get a poling platform like that
@captstephenflookjr 4 жыл бұрын
sick rig!!! will it get on plane with 3 people? How fast will it go with 2?
@FishandsurfChs 4 жыл бұрын
Yooooo thanks dude. Yes it will plane out with three. The weight just has to be distributed evenly. And it hits 22-26 knots with 2
@LowCountryFishing 3 жыл бұрын
How is the bull slap? Im considering something like this for a floodtide boat
@FishandsurfChs 3 жыл бұрын
It hull slaps pretty bad with the aluminum
@factormovil 3 жыл бұрын
Great boat. What was the total cost for this boat. Did you buy the Jon used?
@FishandsurfChs 3 жыл бұрын
Brand new a few years back. Around 9k
@davescheer5038 4 жыл бұрын
Saw this video and this boat is the perfect set up, my question would be is an aluminum boat easier to pole than a heavier fiberglass boat ? How does an aluminum boat hold up in saltwater , and how much did your poling platform cost ?
@FishandsurfChs 4 жыл бұрын
So I’ll try to answer these in order. Yes the aluminum is way easier than a fiberglass boat because it’s a completely flat bottom and way lighter. Aluminum holds up fine in the salt water as long as it’s rinsed off and cleaned. Unfortunately all hardware suffers holding the boat together so I am slowly converting it to stainless. The poling platform was done by a family friend so the price really isn’t relevant because it was way lower than normal.
@captgregbrown5773 3 жыл бұрын
CMC Trim and Tilt thet are great.
@FishandsurfChs 3 жыл бұрын
Ohhh I love em. Next rig will have one
@working2bselfsufficient724 4 жыл бұрын
Sweet. I have a Lowe 16 ft modified V, riveted n welded Jon boat also. Love the thing more than any other boat I've ever owned. Glad also to hear you talk about all the bs people try and sell you. It's nonstop until you've done so much mods yourself people run out of things to offer you. Lol I build everything myself from deck, hatches, mini tower, etc every single thing that wasn't factory in 88' I've hand built myself. Worth buying a decent welder for aluminum especially for transom replacement etc. Some times need weld rivets just won't work but I didn't use rivets where I can get away with it. I'm also redoing my trailer atm the back brace is rusty n sagging a little so cutting it out and welding in a new brace, new leaf springs, and new solid axle to go with new tires and repainted trailer wheels. Would cost me more than the cost to buy a welder new and supplies vs buying a new trailer or bringing somewhere to fix it for me. Defanetly worth the investment for future and aluminum boats are the way to go over heavy fiberglass (unless going offshore).
@FishandsurfChs 4 жыл бұрын
They are just so easily customizable. And manageable at that. Thank god for tig welding! I think it’s possible to save money on trailer work but I see the possibility of just cutting losses and buying one new. Thanks for the interest man, stay fishing tight lines🤘🏻
@working2bselfsufficient724 4 жыл бұрын
Edit: I did use rivets where could and welds only where rivets do not work well.
@working2bselfsufficient724 4 жыл бұрын
@@FishandsurfChs I hear on some trailers but mine is galvanized and the only reason the back brace is shot is because some ahole hit it years ago and compromised the galvanizing on that rear brace. So over time rusted but besides needing that brace replaced and adding new u joints leaf springs etc is cheap. New trailer would cost me way more and someone would just fix this one and sell it. Since my boat weighs less than 600lbs loaded doesn't need a huge trailer. Will cost me couple hours of my time and probably $200 and trailer will be like new for next 5 years. My grandfather bought this Lowe new in 88' and we have already replaced everything a couple times over the decades of use it's given us. Unfortunately gramps passed away couple years ago so just me working on it these days. My son will take to it he lives boats n fishing but he's only 10 so the building repair parts are still too boring for him. In couple years he will pick up building/repairing things I'm sure. Also aluminum is so much easier to clean and maintain compared to fiberglass not to mention 6 gallons of fuel keeps me going all day/night with my 2 stroke 25hp and no fiberglass boats have a 6" draft and sip fuel (fuel doesn't seem like big deal but if your a daily sportsman it adds up quick) Tight rivets and tight lines✌🏼
@joeyjoe8892 4 жыл бұрын
I got the 1448 same motor tiller give me a little bit more room extension tiller and grab bar dopest boat I ever had trolling motor and welded Mount up front all weld I like the fact that I could stand and sit in the middle of the boat as well like a centerpiece you got a dope boat that's what's up
@FishandsurfChs 4 жыл бұрын
Yewwwwww
@FishandsurfChs 4 жыл бұрын
Love the tiller models. I bet the extra room is clutch!
@joeyjoe8892 4 жыл бұрын
@@FishandsurfChs yeah tracker grizzly
@joeyjoe8892 4 жыл бұрын
@@FishandsurfChs but like you said the real Beast sits up front that's 99.9% of my fishing day
@chrisgrigsby176 4 жыл бұрын
Great video! Which garmin is that I’m in the market and not trying to break the bank.
@BrianClunie 4 жыл бұрын
Very cool, I just Subscribed!
@FishandsurfChs 4 жыл бұрын
Yewwww thank you ! Stay tuned!
@marlinbite7051 4 жыл бұрын
Nice rig for around here man!
@FishandsurfChs 4 жыл бұрын
She does the job! 🤘🏻
@twopassionsfishing386 4 жыл бұрын
Nice setup
@FishandsurfChs 4 жыл бұрын
Yewww
@jacobwilliamson9367 Жыл бұрын
Yo I live in Conway SC that’s crazy
@FishandsurfChs Жыл бұрын
Nice man
@jake-d4747 Жыл бұрын
Who did your poling platform? I live In Georgetown and might know them.
@lukedejour 4 жыл бұрын
Thanks for sharing. Curious why did you mount your trolling motor on the left side if you fly fish?
@FishandsurfChs 4 жыл бұрын
Rarely have the trolling motor active when I fly fish. I de-mount and stow it so we can pole. If I’m solo I launch the minnkota and generally it is out of the way. It’s not perfect but I strip line behind me into the floor board and stand a little further back. Sometimes my laundry basket makes things even easier but I don’t mind the motor to the left
@MarshRunnin 4 жыл бұрын
you have lots of potential with youtube in my opinion dont stop the videos btw have you ever had problems spooking fish since the boat is aluminum? im 17 and looking to get into fly fishing around hhi. thinking about getting a jon boat like this or a kayak!
@FishandsurfChs 4 жыл бұрын
I ppreciatte the kind words dude. And no not any more spooking than any other water craft. Have you ever tried paddleboard fishing? Watch my belly crawler video (most recent before this one) I explain why I love paddleboard fishing more than boat or kayak
@sharonbraselton4302 2 жыл бұрын
buy evotion 552 cabin cruse 150 175 hp orp 150 hp jet oytbard
@dias2343 2 жыл бұрын
Just picked up a Max Gain Systems push pole kit. Did you water proof the inside of yours with polyurethane? Wasn’t sure if it was crucial. I came across it quite a bit when I was doing my research-wanted to see your thoughts before I epoxy this thing up
@FishandsurfChs 2 жыл бұрын
I did not. I just glued the hell out of it and have had no problems going on 3 years
@benevans1988 3 жыл бұрын
Yooo, I thought I recognized your boat then I saw the apartments. I live right down the street in anew farm.
@FishandsurfChs 3 жыл бұрын
Nice dude ! I grew up around there
@TriCSyndicate 3 жыл бұрын
Looking for the link to the DIY push pole you mentioned.
@FishandsurfChs 3 жыл бұрын
Max Gain Systems
@charliehebert4909 4 жыл бұрын
Love your rig. Was wondering how well it poles when/if you’re not using the trolling motor.
@FishandsurfChs 4 жыл бұрын
Poles as well as you can push 500 (ish) pounds! Aka very easy 🤙🏼Thanks for the kind words
@larryrose8851 4 жыл бұрын
Charlie Hebert it’s all about the weight
@larryrose8851 4 жыл бұрын
Try to keep it close
@larryrose8851 4 жыл бұрын
I fight weight all the time put the 2020 Motor on its heavy
@badoutdoors5958 Жыл бұрын
how does it poll? I am putting a platform on my xpress db16
@FishandsurfChs Жыл бұрын
Not the best at tracking, but it poles and gets skinny af
@Taylormadedrum Жыл бұрын
I realize this video is pretty old, but where did you find those stacks that you used under your trolling motor? Having a hard time finding them online.
@FishandsurfChs Жыл бұрын
From minn Kota through west marine
@Taylormadedrum Жыл бұрын
@@FishandsurfChs wow thank you for the reply!!
@jimaugenti704 Жыл бұрын
What lb thrust motor is hat and do you like it enough to buy it again? thx for the vid!
@FishandsurfChs Жыл бұрын
No idea it’s a Yamaha 25 but I love it and would buy it again. Would go 40hp 2 stroke if I had to build it again x
@edwardabrahamiii3742 3 жыл бұрын
What size transom you got on that boat??
@ChampionHomestead 3 жыл бұрын
I’m around the same area where Are you launching out of ?? I’m wanting to pull the a Boat with a AWD wagon too ……. Some of the ramps make me nervous with how slippery and steep they are
@FishandsurfChs 3 жыл бұрын
You’ll be fine with the wagon and a light boat man. They are all paced with super rough gravel
@jerrykrobby 4 жыл бұрын
That's an awesome back water boat! You mind if I ask what you have invested in it?
@FishandsurfChs 4 жыл бұрын
what I have invested in it and what everyone pays are two different things. All items are searchable on google. boat, motor, poling platform, pole, and trolling motor are the basics. Its an under 10k micro skiff
@jerrykrobby 4 жыл бұрын
@@FishandsurfChs gotcha
@screaminR6 4 жыл бұрын
How does it do in brackish and salt water? Do you rinse it religiously to avoid corrosion?
@FishandsurfChs 4 жыл бұрын
After every single trip. My dad always raised us to clean the boat real well after boating in the marsh around here! thanks for the watch my man, follow along!
@MRBOBBY8706 3 жыл бұрын
Great video man. How much are u into this thing?
@FishandsurfChs 3 жыл бұрын
About 11.5k
@MRBOBBY8706 3 жыл бұрын
Not too shabby. Thanks for the candidness. I am looking to start doing some shallow fishing around the Galveston Bay complex and I'm looking for a cheap route to get started.
@rufinogonzalez6020 3 жыл бұрын
I found a ten aluma craft with motor for really cheap wanna turn it into micro skiff do u think it could do well in shallow water
@FishandsurfChs 3 жыл бұрын
Ten foot? I’m not understanding you.
@rufinogonzalez6020 3 жыл бұрын
@@FishandsurfChs yes ten foot sorry
@rufinogonzalez6020 3 жыл бұрын
I’m not worried about standing plat forms really anything like that just getting there quick and moving around
@rufinogonzalez6020 3 жыл бұрын
@@FishandsurfChs also bearing able to load it in my truck and not need a trailer
@jordanvincent10 2 жыл бұрын
Where can one buy a tower platform like the one you have on there? I read you said a family friend helped build it but any ideas where I could find one just like that to put on my aluminum boat? Or if your friend sells that kind of service themselves?
@FishandsurfChs 2 жыл бұрын
You really just need an aluminum welder. My guy is up in Georgetown
@j.vincent 2 жыл бұрын
@@FishandsurfChs Ok that helps, I may actually know of one down here in Texas. Appreciate the reply!
@sharonbraselton4302 2 жыл бұрын
chief addibg furño 1621 radar on tower
@stevenkurtis1908 2 жыл бұрын
Where do I buy the push pole stand above your motor?
@FishandsurfChs 2 жыл бұрын
You get them custom welded by craftsman
@jarrodmorales 3 жыл бұрын
Which model is it? There are a couple different boats with same size and shape.
@FishandsurfChs 3 жыл бұрын
1665 !
@brianfarris9119 4 жыл бұрын
Yo im in Charleston and just built a tiny boat for some inland saltwater fishing
@FishandsurfChs 4 жыл бұрын
Dope man. It’s a great class of boat to own
@angler152 Жыл бұрын
How does she ride? I am so torn between getting a skiff Or a jon boat
@FishandsurfChs Жыл бұрын
She rides as good as a semi vee can. Theirs a give and take of pros and cons with each.
@Lifeadventure22 4 жыл бұрын
nice boat how much would a boat like that cost in total and how much per month? thanks
@FishandsurfChs 4 жыл бұрын
About 10k brand new hull, motor, trailer
@FishandsurfChs 4 жыл бұрын
Thanks for watching as always
@Lifeadventure22 4 жыл бұрын
@@FishandsurfChs that aint bad thanks again and tight lines
@FishandsurfChs 4 жыл бұрын
Thanks brother, keep em wet
@FishinWithFelix 4 жыл бұрын
Do you mind sharing who it was in Georgetown that made and installed your poling platform? I found a deal on 16ft Aluma Craft and would love to have a sweet setup like yours.
@FishandsurfChs 4 жыл бұрын
Let me look in some paper work and I’ll find the marina that fabricated it
@FishinWithFelix 4 жыл бұрын
@@FishandsurfChs Thanks man! I appreciate it.
@FishandsurfChs 4 жыл бұрын
The platform was fabricated by the boys at “Cramer Metals” in Georgetown
@TurfSurfer 4 жыл бұрын
Ever find the DIY push pole link ? Definitely interested
@FishandsurfChs 4 жыл бұрын
I’ll find it !
@FishandsurfChs 4 жыл бұрын
It’s from a place called “Max again Systems. They sell several different materials for DIY projects
@TurfSurfer 4 жыл бұрын
Fishing & Surfing Charleston, SC man of your word! I appreciate the fast response and the help!!!
@coryboyd7958 3 жыл бұрын
How much would you say you have in the boat ,motor and trailer?
@FishandsurfChs 3 жыл бұрын
Bought it for just under 10k brand spanking new
@veronicavelez9102 3 жыл бұрын
14 dislikes gotta be personal haters who are chapped ur skiff is too fyeee. well done dude
@FishandsurfChs 3 жыл бұрын
Damn straight. Thanks a lot 🤘🏻
@_georgeprince 2 жыл бұрын
Do you know the total weight of the trailer and boat? Thanks!
@FishandsurfChs 2 жыл бұрын
Nope!
@captgregbrown5773 3 жыл бұрын
Do you have TNT ?
@FishandsurfChs 3 жыл бұрын
what's that????
@jameswoodruff6716 4 жыл бұрын
badass boat where is the poling platform from?
@FishandsurfChs 4 жыл бұрын
Custom made in Georgetown SC! Rock and roll 🤙🏼
@boydrichardson7726 4 жыл бұрын
My family is in the Georgetown area. Trying to get a platform myself. What's the name of the purple who made it?
@boydrichardson7726 4 жыл бұрын
@@FishandsurfChs my family is in Georgetown area and I'm trying to get a poling platform myself. Do you mind sharing the name of the people who made it?
@sumpwhere_lost 4 жыл бұрын
Sweet boat, I'm trying to find a somewhat cheaper poling platform for my jon boat too. Can you message me on how much it was/where you specifically got it made?
@FishandsurfChs 4 жыл бұрын
This was a personal friend who did a one time job. I’ve been told to not share his contact bc he dosnt do this full time. There are tons of bolt on platforms available online and at your local boat dealer
@GuthrieBoys 4 жыл бұрын
Great video. Thanks for sharing. Do you have contact info for poling platform install in Georgetown? Thanks.
@FishandsurfChs 4 жыл бұрын
The fabricator has now asked me to stop giving out his number due to being backed up
@GuthrieBoys 4 жыл бұрын
@@FishandsurfChs I guess that's a good problem to have :). Thanks.
@FishandsurfChs 4 жыл бұрын
No worries Guys. They do sell pre made kits online or find a local aluminum fabricator 🤙🏼
@GuthrieBoys 4 жыл бұрын
@@FishandsurfChs Where? Thanks.
@ksfishingadventures 3 жыл бұрын
How much does a set up like this weigh with the trailer ?
@FishandsurfChs 3 жыл бұрын
I believe somewhere around 600lbs
@bobafatt2155 4 жыл бұрын
How well does it handle rough water ?
@FishandsurfChs 4 жыл бұрын
It does alright but for the most part it’s flat so you’ll get a whooping somewhat lol
@deadleyhawk7149 Жыл бұрын
How big is it
@FishandsurfChs Жыл бұрын
16
@zachjaeger2518 4 жыл бұрын
Sick
@FishandsurfChs 4 жыл бұрын
Yewww
@Roman-lu6sp 3 жыл бұрын
Where did you get the push pole?
@FishandsurfChs 3 жыл бұрын
Online. Built it from materials from Max Gain Systems
@Roman-lu6sp 3 жыл бұрын
Fishing & Surfing Charleston, SC thanks
@ashbucharon8263 4 жыл бұрын
What is the speed of the boat with that 25hp?
@FishandsurfChs 4 жыл бұрын
Roughly 25 knots 🤘🏻🤙🏼
@dduff4013 4 жыл бұрын
What do u do for work?
@FishandsurfChs 4 жыл бұрын
About 6 different side hustles haha
@lodogoutdoors9030 3 жыл бұрын
how much was the whole build?
@FishandsurfChs 3 жыл бұрын
Around 15k
@jwrcountry 2 жыл бұрын
where did you get the platform for it?
@FishandsurfChs 2 жыл бұрын
Custom made in Georgetown SC
@jwrcountry 2 жыл бұрын
@@FishandsurfChs they did a good job that’s badass
@FishandsurfChs 2 жыл бұрын
Thanks man. My new whip was made by the same fabricator and I’m doing a video on it soon🤙🏼
@jwrcountry 2 жыл бұрын
@@FishandsurfChs i just bought my first boat it’s a 16 alums craft flat bottom with a 25hp and i need a trolling motor for it asap!!! haha
@FishandsurfChs 2 жыл бұрын
Yewwwwww that’s awesome
@mommaneedsanap 3 жыл бұрын
How wide is this boat?
@FishandsurfChs 3 жыл бұрын
56” beam
@larryrose8851 4 жыл бұрын
I have been a professional boat builder for 35 years I have a 1987 bass tracker I built myself you can’t buy a better boat
@FishandsurfChs 4 жыл бұрын
don't get no better than self built homie!
@sharonbraselton4302 2 жыл бұрын
wrobg ejrrc baß boat ejrrc oytbar 20 tó 40 kies sing bartt 2 berrt 40 too noes tehsa crks 46 moes too 92 mîe ektrc rabge
@DownSouthAngler 4 жыл бұрын
Hey where do I find a boat like that
@FishandsurfChs 3 жыл бұрын
you build it
@eltonjrivers9402 3 жыл бұрын
where is a good spot i can take my 12' jon boat in charleston?
@FishandsurfChs 3 жыл бұрын
Wapoo cut is a good start! James island! Great fishing and access to all kinds of structure
@drjaywhitlock 3 жыл бұрын
@@FishandsurfChs No way in hell I would go through Wapoo cut in a 12 ft john boat.
@FishandsurfChs 3 жыл бұрын
Don’t do it on a weekend or a big tide with current but the upper stono and Ashley is awesome. I’ve kayaked out of it fine! Don’t be skurred!
@drjaywhitlock 3 жыл бұрын
@@FishandsurfChs LOL! I agree the other sides of the cut are fine but if he don't know how rough that tide can get going through there he's going to be on one hell of a roller coaster ride. That is if he makes it through. Awesome boat by the way!
@FishandsurfChs 3 жыл бұрын
You’re not wrong ! Thanks for setting him straight. All good points. Maybe try more chill ramps in a 12’ hahah
@DallasLopez1 3 жыл бұрын
I've got to pick your brain about this boat. How do I contact you outside the video?
@FishandsurfChs 3 жыл бұрын
This message thread is fine? Whatcha need to know?
@DallasLopez1 3 жыл бұрын
Where'd your pick up the polling platform?
@FishandsurfChs 3 жыл бұрын
Custom made in Georgetown SC
@AVRides 3 жыл бұрын
Where do you put in at?
@FishandsurfChs 3 жыл бұрын
All over South Carolina man
@AVRides 3 жыл бұрын
@@FishandsurfChs I gotcha, I'm in Columbia and am frequently down in Charleston. Picked up a Havoc 1656 last week and was wondering the best ramp to put in. I was thinking Remley's.
@FishandsurfChs 3 жыл бұрын
Remleys is where I grew up. Lots of traffic is the only bad part
@AVRides 3 жыл бұрын
@@FishandsurfChs What's your second favorite launch
@FishandsurfChs 3 жыл бұрын
Garrens bridge
@shotsrodsoutdoors5116 3 жыл бұрын
1648 or 1652?
@FishandsurfChs 3 жыл бұрын
48
@Outdoors-pb2sc 4 жыл бұрын
Whats the top speed?
@FishandsurfChs 4 жыл бұрын
28ish
@Outdoors-pb2sc 4 жыл бұрын
@@FishandsurfChs With how many people?
@FishandsurfChs 4 жыл бұрын
2. It will drop a couple knots every 100lbs
@leonardcubit5715 3 жыл бұрын
Toe'gripping ! Surf'on dud€
@FishandsurfChs 3 жыл бұрын
Yewwwwo