"My dados don't fit!" - Fine tune them with this clever jig!

Рет қаралды 35,887

6 жыл бұрын

CLICK "SHOW MORE" BELOW FOR LINKS & NOTES►
SUBSCRIBE (FREE) TO STUMPY NUBS WOODWORKING JOURNAL►www.stumpynubs.com
SUBSCRIBE TO OUR KZfaq CHANNEL► / stumpynubsworkshop
LINKS TO TOOLS SEEN IN VIDEO (clicking on these links helps support us, at no cost to you)►
Fisch Wave-Cutter Forstner Bits: amzn.to/2xKSBhj
Video about Forstner bit types: • What you need to know ...
Self-adhesive sanding discs (6-inch, 80-grit): amzn.to/2F0DKCA
Build a homemade Jig-Saw: www.stumpynubs.com/jig-saw.html
Buy other DELUXE woodworking plans: www.stumpynubs.com/homemade-to...
HELP KEEP OUR VIDEOS FREE! Please support those who support us by visiting their websites and having a quick look around-
Sjobergs: www.boratool.com/brands/sjober...
MyWoodCutters: mywoodcutters.com/
Fisch Tools: www.boratool.com/brands/fisch/

Пікірлер: 52

@albertm8576 Жыл бұрын

Excellent idea, I was building a free floating TV cabinet and cut the dados with a router bit for 3/4”plywood. Made for a very tight fit. Grabbed an 80 grit 3m cubitron diisk wrapped over a 1/2” scrap of wood and 3 passes on each side of the dado and now perfect for glue. Thank you for that great idea!

@738polarbear 6 жыл бұрын

Excellent .i told you that your jigs were the best ,thanks.

@dsbeesapiaryupdate8759 6 жыл бұрын

If you keep these videos coming, you're going to make me subscribe. I'm getting too many channels to watch. Thank you!

@bobclifton8021 6 жыл бұрын

Very clever solution to a perennial problem!

@clydedecker765 6 жыл бұрын

Love you ideas and ingenuity .. and that you're finally putting more videos out.

@watermain48 6 жыл бұрын

Great idea James. And simple enough for someone like me to accomplish...thanks.

@stevenkofoed1698 6 жыл бұрын

Thanks Stumpy! You always have the best tips and tricks, but this has to be one of the best!

@MrMarkpeggy 6 жыл бұрын

Very clever James! You are awesome!

@PSCThrillSeeker 6 жыл бұрын

James, I would have never thought of this in a million years! Always very informative James!

@jraglob5924 6 жыл бұрын

Thanks, solves a current problem and I do buy some of your plans. Keep them coming.

@garyschmidt7320 5 жыл бұрын

I have a side rabbet plane , but it is tough to use on plywood. May build one of these. I almost always pre-sand all inside surfaces to get all the way into corners and for ease of sanding. This also helps when plows or dadoes are tight.

@BrianTimmonsTX 6 жыл бұрын

Clever and quite useful. I dig it.

@AndrewScheier 6 жыл бұрын

Nice and simple tutorial!

@Captleemo 6 жыл бұрын

Once again a very enjoyable and educational video.

@harrylogan9778 6 жыл бұрын

Great idea James

@davemccracken6436 6 жыл бұрын

Cool idea, and wonder how many other uses for this kind of thinking we all can come up with? Thanks James!

@deweygravesjr.122 6 жыл бұрын

Nice video! I would of never thought of this. Thanks James

@FranksDIY 6 жыл бұрын

Great idea

@linotrillo9297 6 жыл бұрын

Pretty cool, simple and effective 😎

@jimkownacki3629 6 жыл бұрын

That is an awesome jig!

@gorjanaczl1 6 жыл бұрын

Thank You! :) Like your stile, and the jig is awsome :)

@jean-marclabonte2844 6 жыл бұрын

Nice Simple Solution. Thanks for posting the build.

@StumpyNubs 6 жыл бұрын

First.

@LouAdzima 6 жыл бұрын

Nice idea!

@samuelroberts334 6 жыл бұрын

That’s pretty cool!!!

@wjphillip 6 жыл бұрын

Clever solution!

@scotttovey 6 жыл бұрын

Good Tip and trick.

@namelessgarrett3052 6 жыл бұрын

Another winner.

@juginstr1019 6 жыл бұрын

Nice jig!.I think I can do that.Thank you.

@TonatiuhMellado 6 жыл бұрын

Gracias por compartir, muy útil

@TheDonJoyner 6 жыл бұрын

Clever, indeed. Nicely done. I strolled over to the website to peruse all of your available shop plans. I'll likely return soon as I'm beginning a renovation of my own shop, such as it is. I'm curious whether you've ever seen or considered the practicality of an X-Y positioning/holding table for the typical bench-top mortiser? Inquiring minds, and all that.

@toysoldier46552 6 жыл бұрын

I'll stick with my bumblery Dremel router attachment, always faster than sanding and if I set it properly it never takes too much away lol. The other option is just find a flat piece of stock and get those square sanding pads for palm sanders, spray or tape them to the board and so long as you sand in a straight line it will do the job as well. Thanks for sharing James, this would probably be much easier than the way I do it lol.

@DiHandley 6 жыл бұрын

Pretty damn clever!

@cobberpete1 6 жыл бұрын

Ditto everything below. Thanks James

@jeremys5904 6 жыл бұрын

Get some sandpaper rolls from Style Line Inc. ... the best sandpaper!

@OmarFrias 3 жыл бұрын

Clever

@mikepierce4216 6 жыл бұрын

We should call Moustache Mike "Wren" from now on. You can have the Wren and Stumpy (Stimpy) show. ;-)

@Bang-C4 6 жыл бұрын

Thanks Stumpy but I've been widening for years. Now I'm thinking about doing some slimming, any ideas on that?

@blueairwoodworking7735 6 жыл бұрын

Love it.. May have been asked before, do u have and links to Canadian tool sites that will help you out.

@StumpyNubs 6 жыл бұрын

One of our web sponsors is Mywoodcutters.com, a Canadian retailer of router bits, jointer/planer knives, etc. We don't get anything from their sales. But it never hurts to use their website's contact link to tell them you're a fan and that we sent you :)

@thechristmascarpenter496 6 жыл бұрын

Neat idea! Do you by chance have a link to that little combination square you used in this video?

@StumpyNubs 6 жыл бұрын

amzn.to/2EN6J9G

@ryanhowlett891 6 жыл бұрын

If i may ask what type of plane was the one used at the begining, i have one very similar made by sargent but with 2 blades. Also great way to solve a problem if you dont have the right tools.

@StumpyNubs 6 жыл бұрын

Side rabbet plane. I mention it in the video.

@garyschmidt7320 5 жыл бұрын

Stanley still makes the two bladed left/right version. No.79

@seanflanagan2441 6 жыл бұрын

I'm sad, Stompy; expected you to solve problem of dado being too wide. I happen to have bought a few Lee Valley mini planes, including a side plane. It worked well enough that I don't need this tool. However, I do appreciate it being free; thanks! Now... what about my dado?

@totobill22 6 жыл бұрын

à 5:57....la vis du milieu a foiré, elle ne tient plus rien :( Sinon, gabarit sympa, merci du partage :)

@David_K_pi 6 жыл бұрын

I love it. I'm gonna make one. I do have a suggestion for a slight improvement, though. Round over the rear edges on the vertical block and you won't have to worry so much about scraping your knuckles on the sharp edges. Do that before you screw it to the base. Easy peasy with a round-over router bit or a little sanding.

@mikeimho 6 жыл бұрын

To call any jigsaw ideal for cutting straight lines, is ... well it doesn’t sound right in my ears.

@StumpyNubs 6 жыл бұрын

I didn't say it was ideal for cutting straight lines. I said it was ideal for THAT job, which was cutting out a recess where you couldn't enter from an edge, as you would with a band saw.