A brief overview showing the working parts of my home made slab roller.
Пікірлер: 90
@edwardshearer79314 жыл бұрын
Its amazing that something posted so long ago is still useful today. Just finished making my own slab roller after watching this video. So wonderful of you to post it all those years ago. Works perfect and I'm sure the grand children are going to love it! (they hate the roller pin)
@doriecronin4 жыл бұрын
edward shearer Hi, I’m interested in building one also. Did you use pvc? Any changes from video? What size did you make yours? Thank you, dorie
@newearthclaypottery4 жыл бұрын
oh funny about the grand kids; I feel glad it worked out for you. I always intended this one to be my 'working prototype'.. but it actually works fine for what I do. Be sure to add plenty of structure under the table top for nice even slabs. I believe someone else posted the same design but used oak boards and filled the rollers w concrete.. both great improvements. I wish you well edward
@NickCantrell12 жыл бұрын
Thank you so much for posting. This is not only going to fill out the wife's studio equipment list very nicely, but it will be the coolest Christmas present EVER!
@ford765313 жыл бұрын
This looks great. I would say you do not need steel rollers. Just fill the pvc pipe with concrete to stop the flexing.
@designfordeen7 жыл бұрын
I have been dreaming of making my own die cutting machine. I did figure out how to make one that uses a lever after watching many KZfaq videos. I still kept wondering what it takes to make one that uses a roller. Thank you very much for posting this video. Now I know that I am one step - a HUGE step - closer to making my dream come true, alhamdulillah! I like that it truly is so easy. May Allah reward you for generously sharing your knowledge.
@newearthclaypottery15 жыл бұрын
Thanks. I believe the larger thicker PVC is best for up top. You can also do it with smaller tube down below with crank on it for greater torque. Take care.Bill
@zalt5712 жыл бұрын
Well explained. I am going to build one and I will use the PCP but will fill it with concrete plaster.
@aerohour5 жыл бұрын
Ohh thank you very much for sharing, a boon for someone like me who cannot afford the expensive ones
@DavidDeWittStudio9 жыл бұрын
Brilliant! This is why I Love KZfaq!!!
@newearthclaypottery8 жыл бұрын
+David DeWitt yes I've and still do.. am getting much inspiration from the vids here thank you for youtr kind words
@annhogg75006 жыл бұрын
Brilliant have you the plans
@bloomingtonmike12 жыл бұрын
Built mine last week. Super awesome. I will cut 3/4" plywood parts (latest design) for lower 48 folks (for $100 plus wood/materials and shipping) if folks want them.
@newearthclaypottery12 жыл бұрын
yes I've heard of doing that sounds like a good idea; at least for the upper roller. You can also use a smaller roller on the bottom and put the crank there for more leverage.And the table obviously doesn't need to be that deep. Mine is the working prototype; the final would be made from channel iron. But his is a cheap way to get a slab roller I wish you well, Bill
@ThatLynnGirl15 жыл бұрын
I love that!! Thanks for the info! I might just give it a go! I don't DO a lot of slab work but a smaller one of these would be a treat!!
@belp48234 жыл бұрын
Thank you so much! I made one and I love it ! I am making handmade tiles for my shower !
@bluegirl14459 жыл бұрын
So smart.. Thank you for posting this.
@codyjones196913 жыл бұрын
Thanks I made my own and it work great!!!!!!
@whoiscodyblood9 жыл бұрын
DOING IT!! hope to make the tile for my kitchen remodel.
@Agamimg3608 жыл бұрын
Now I like this one simple design and operation sweet only thing I would do different would be to make it table top or with fold away legs as I have a very small work shop so Foot print is always a worry. Great idea.
@newearthclaypottery8 жыл бұрын
+Th Linn gill thank you Jill others also noted that possibility good idea
@jacknastytravels11 жыл бұрын
I think I'm giving this a shot!!! Thanks
@bloomingtonmike12 жыл бұрын
@newearthclaypottery Built mine last week. Super awesome.
@jmg195715 жыл бұрын
that was great...keep up the good work.......
@newearthclaypottery11 жыл бұрын
it is pretty simple I wish you success
@marnunez54319 жыл бұрын
Gracias!!! es un gran invento para planchas o placas. Muy muy bueno!!!!
@newearthclaypottery9 жыл бұрын
Marisa Nuñezez: danada (sp?)
@Sylviara20108 жыл бұрын
+newearthclaypottery De nada :)
@Agamimg3608 жыл бұрын
to make drum more rigid add caps to each end and fill with tightly packed mud before second cap there is a guy on youtube that does wood working that made a thikness planer that has a bed adjustment design you might barrow so you can do away with the extra planks. it is also very inventive in its design. By using simple geometry he has it to were he can adjust it a little or a lot as his need dictates.
@dianewebb26897 жыл бұрын
I like yours. Mine required some machining. Got the directions from an old Ceramics Monthly issue.
@salman1236511 жыл бұрын
thats so cool and easy to make thanks a lot :)
@newearthclaypottery11 жыл бұрын
hi Ayala my rollers are 4 1/2" diameter but the diameter doesn't matter too much bigger better for one that contacts clay you can use a smaller one on bottom and put crank there for more leverage I would keep distance between rollers close... mine are probably too far i wish you well Bill
@newearthclaypottery13 жыл бұрын
@ford7653 Hi, Thanks. I've heard of that: however the flexing, if it actually does flex is not a factor w sizes I roll.
@carlosdegroot69664 ай бұрын
awesome thanks
@newearthclaypottery4 ай бұрын
thank you carlos
@newearthclaypottery11 жыл бұрын
thanks I wish you well Bill
@credenza113 жыл бұрын
Brilliant.
@TheMom2three6 жыл бұрын
Awesome!!! Thanks so much!
@newearthclaypottery13 жыл бұрын
@juneyb01 You're welcome Thanks for saying... Bill
@truthiseverything95117 жыл бұрын
Very cool!!
@dafnadagan678710 жыл бұрын
thank you, i made one and i love it! you are grate!!! Dafna :)
@newearthclaypottery14 жыл бұрын
@resolutionist Thanks. Making the model helprd me work it out
@newearthclaypottery12 жыл бұрын
thanks Shanna 1950
@newearthclaypottery13 жыл бұрын
@nicksmiley Hi nick, yes I've heard of that.. these dont flex enought to even notice Probably if the thing was wider they would but yea I'm sure that would eliminate flexing I wish you the best Bill
@newearthclaypottery14 жыл бұрын
@juneyb01 You're welcome. I wish you the best if you try to make one. Bill
@akasha121114 жыл бұрын
love it!
@TheCheesemelter12 жыл бұрын
very cool. thanks.
@juneyb0114 жыл бұрын
superb, thank you for sharing.
@DirtKickerStudio15 жыл бұрын
Awesome!
@2lashmit2quit969 жыл бұрын
I made my own and it works very well. The only issue I have is that the cable walks along the rollers and the rollers don't stay parallel to each other. I've tried to make sure the tension is the same by making them the exact length and the eye bolts tightened to the same length. Any advice?
@newearthclaypottery9 жыл бұрын
hi 2L,I've not had that issue; but, thinking about it 'bout the only thing I can imagine is that the distance between the two rollers is different one side to the other.. in other words the two sides upon which the rollers ride are of unequal thickness dimensions. also i found it a little difficult to get the two rollers to start out exactly from the same place; finally i turned the thing on end and secured the two rollers all the way to one end and to the frame before I ran the cables around the figure "8" pattern. Are the cable both wrapped in exactly the same pattern. Or just loosen the cables enough that you can gragually work them both back all the way to one end then snug up the cables.
@newearthclaypottery15 жыл бұрын
Thank you. I git a kick outa makin' my own quipment
@newearthclaypottery14 жыл бұрын
@DirtKickerStudio Thaks.
@newearthclaypottery13 жыл бұрын
@credenza1 Oh my.. never thought of it that way but.. thanks!
@ClownWhisper2 жыл бұрын
you can get two nice steel rollers from old discarded treadmills
@newearthclaypottery2 жыл бұрын
thanks for that suggestion; I will keep it in mind when I start on the final version
@newearthclaypottery14 жыл бұрын
@karenchristutube Cool....cant wait to see what u come up with
@shanna1950-281212 жыл бұрын
pretty cool
@blinkybillism8 жыл бұрын
Hi maybe you could cast concrete into the pipe, that would make it more rigid
@newearthclaypottery8 жыл бұрын
+John Gleeson Hi John that's a great Idea. Actually this is only a working prototype; I have a couple steel rollers about same diameter as these PVC pipes I plan to use on the final version
@ayalaassaf11 жыл бұрын
magnificanet! I am going to build one like this. Can you specify what size the table is? and what is the diameter of the roller? What shall be the distance between the rollers? (I was thinking to make the internal surface 60X100 cm and to use 4" diameter pipes as a roller ). Your response will be gighly appreciated.
@lindarivers24076 жыл бұрын
What does it look like under the masonite bed? Trying to figure out the structure of what is holding up the masonite pieces.
@newearthclaypottery6 жыл бұрын
under the masonite I built a 2x4 frame like floor joists; then 1" boars on that, then the masonite
@amsluvsagf Жыл бұрын
This is great! Can you tell us how much cable wire you used for this?
@newearthclaypottery Жыл бұрын
that will depend on the size of the slab roller and the diameter of the rollers; you'll figure it out as you go... maybe assemble the table and rollers and use a length of string to run it as I ran it w cable then go get a little more than that length of the cable you want to use
@amsluvsagf Жыл бұрын
@newearthclaypottery thank you!
@Benstube1234567 жыл бұрын
How about plaster cast rollers (from your pvc pipe) instead of metal? I find clay sticks to metal rollers.
@newearthclaypottery7 жыл бұрын
yes it does but I always use a medium of some sort; most potters do be it paper canvas andf old sheet something between the rollers and the clay
@Saramics4 жыл бұрын
Great video! May I ask what kind of metal wire is used here? Thanks :)
@newearthclaypottery4 жыл бұрын
hello Sara, I used mostly 1x6 boards, 2x4s under table top for strength; masonite sheets to govern slab thickness. also 5" PVC pipe steel cable, cable clamps, "I" bolts with wing nuts to tension rollers and a wooden dowel through holes to turn the top roller. hope that helps
@newearthclaypottery14 жыл бұрын
@jmg1957 Thank you
@sabrinaflipse77323 жыл бұрын
Can you show it compress a slab?
@NickCantrell13 жыл бұрын
so what about pouring concrete into the rollers?
@newearthclaypottery12 жыл бұрын
@nicksmiley Hope she likes it ! Bill
@maureenduck13799 жыл бұрын
Just what I am looking for, and the plans were offered but the link would not open, am I too late, I do hope not. Mo Duck
@newearthclaypottery9 жыл бұрын
Maureen Duck I did not offer actual plans; perhaps you're thinking of one of the other home made slab rollers on you tube
@pj69915 ай бұрын
you make it seem as if the cable is one length that goes from one end of the table, around the rollers, to the other end of the table. I don't believe that's the actual case. It seems like you have cables on each side that keep the roller in line with the table and figure 8s on each side of the table going around both rollers and inside of the cables on each table side. Amiright??@@newearthclaypottery
@newearthclaypottery5 ай бұрын
@pj6991 yes; two cables one n each side beginning at one end of the table to the roller.. then a couple fig 8s and then to the other end
@Mr123bears10 жыл бұрын
Made a Slab Roller and turned it into a Woodblock Press Woodblock Press
@sharonkeef05225 жыл бұрын
Hi I was wondering do u still have the little mini one if so could I have it or one like .
@newearthclaypottery5 жыл бұрын
Hi I do have it and will keep it to show friends and visitors to my shop... look close; I feel confident you can replicate it yourself
@newearthclaypottery13 жыл бұрын
@codyjones1969 Cool!...Not very hard was it..? I'll visit yur site ...... maybe see it in action...? I wish you the best.. Bill
@jasonfrew6 жыл бұрын
Hi do you have a link to the plan i would like to build one too. TIA!
@newearthclaypottery14 жыл бұрын
@akasha1211 Thanks!
@alexle35989 жыл бұрын
Hi! can you provide some draws or scetches, dimensions etc, pls?
@mibrahi053 жыл бұрын
Does it really work?
@newearthclaypottery3 жыл бұрын
yes it works well; not as precise as I imagine the final welded metal with metal rollers will work.. but it suite me for the amount and size of slab work I do
@mibrahi053 жыл бұрын
@@newearthclaypottery I am thinking of making one! copying the idea of 2 pvc pipes, filling it with concrete to make sold . Attach both of them to the same side holders. Make the lower one as a drive by adding handle to the side. While The upper piper will move up and down for variable thickness!! What do you think?
@newearthclaypottery3 жыл бұрын
@@mibrahi05 well a crank on lower (possibly smaller one for more 'leverage') roller seems like a good idea.. but it's easier to just change thickness by lowering and raising the bed than trying to create a rising upper roller. I wish you success