Рет қаралды 22,641
Today, is part three of my biggest project yet - building my giant DIY plywood aquarium! In the video, I work on waterproofing the plywood tan with fiberglass and pond shield. The pond shield seals all of the tank to make it waterproof, while the fiberglassing reinforces the seams and corners of the tank. After 2-3 more coats of pond shield, this plywood aquarium will be ready for water!
This is my first time building a plywood aquarium, and I'm bound to make small mistakes along the way. If you're looking for a true "how to" video, I'd look up some of the Fishtubers who have more experience with these builds. I'm confident that this tank will all work out fine, but just wanted to throw out that caveat.
- Part One: • Building the DIY Plywo...
- Part Two: • I Built a Huge DIY Ply...
Below are Amazon affiliate links to all of the materials I used in this plywood aquarium build. I'll keep an ongoing list here and throughout the series:
- Pond Shield (Black): amzn.to/4b6QzYm
- Pond Shield (Sky Blue): amzn.to/48Xbb3s
- Fiberglass Resin: amzn.to/3u2AUbX
- Fiberglass Mat: amzn.to/492RE1x
- Wood Screws - 3 inch: amzn.to/47Seyrk
- Wood Screws - 2.5 inch: amzn.to/496QJx3
- Wood Screws - 1 inch: amzn.to/47Qq8mK
- Wood Glue: amzn.to/3OfVsob
- Sander: amzn.to/3OihjLH
- Sand Discs (60 Grit): amzn.to/4bd1tvR
- Paint Roller Kit: amzn.to/3OeTfcy
- Paint Brushes: amzn.to/42flPk2
- Silicone: amzn.to/3SjsOnw
- Latex Gloves: amzn.to/4b3GTxX
Plywood/Lumber (so far):
- 3/4in 5-Ply Birch Plywood: x3
- 2x4: x16
- 2x6: x10
Tools used/eventually needed:
- Miter Saw: amzn.to/47HVn3u
- Power Drill: amzn.to/47P35c0
- Corner Clamps: amzn.to/4b3HeAJ
- Circular Saw: amzn.to/42oQgEa
Join this channel to get access to exclusive content:
/ @cichlidbros
Thanks for watching! Stay tuned for more updates on the plywood aquarium!