Vince Abednego It’s actually going up for sale tomorrow, I’m up for a new project / challenge

@@FearOrFreedom oh ok nice. Are you going to build another one?

Vince Abednego I’m going to build a K1500 truck, 9” lift and 37” tires

@@FearOrFreedom Sweet!

@@FearOrFreedom dropping an LS in that build maybe?

Guten Tag Erhardt ;) Thanks! I don't know haha, I try to growthe channel but it's hard. Didn't upload videos for a while but got some plans for videos soon :)

The Outcast Rider Goede morgen... Well, in keeping with the language of the international business Traveller...English 🥳 In order to raise numbers on U-Tube... you have to ... HAVE TO ... post ....REGULARLY...👍 Like everyday ... would be BEST ... but ... some of us have a life 😉

nsascn Thanks! Sure I can give you the parts list that I used. Do you have Facebook? May be easier to send you the parts list that way. Look fot Vantasy Car Products on facebook that’s my page, send me a PM and I will look up the parts I used for you. It’s pretty easy to do but you need the right parts or it won’t drive right

@@FearOrFreedomI'd like that parts list.. or even to know where to start lol. I just bought a 1500 last week

Thanks! I’m from Holland, Europe. New build coming soon!

Tbh I never even considered it. My budget was pretty tight, but looking back that would have definitely been an option!

Yeah no clue what they did to that engine. Luckily I had a spare engine and I ended up swapping the crank. The damage where the rod hit the bottom of the cylinder was only minor. Machine shop trimmed it a little and I ended up re-using the block itself. I sold the Van last year but it’s still with the new owner and still running strong as far as I know. Currently working on a new project. ‘97 K1500. Good luck on your G20 man they are great if you get them right

I have the stock shocks in the front, and Gabriel 58403 from Rockauto in the rear. Not too sure about the Gabriel shocks tho, they ride a bit sloppy. But you can look what height they are and get the same height from another manufacturer

Hi Neil, Unfortunately I did not make a video fitting the LPG. It also depends what kind of system you want to fit, injection or mixer system. Moest of these older engines use a mixer system which is very easy to install. Should be some videos on youtube. Good luck!

Ok no problem Thanks for replying 😉

Thank you! Sure I can help you out I have a parts list of everything I used for the lift. Look up my page on Facebook and send me a message: Vantasy Car Products. I will look up the parts list and send it to you on messenger, along with some tips and tricks. It’s easier communicating than here

@@FearOrFreedom thank you. I will do that right away

Patrick Witkamp Dankje😁 Ja hij is inmiddels verkocht, ik zit indd ook in die facebook groep! Check mijn facebook pagina Chevy ‘The Flying Dutchman’ Truck Build, deze gaat nu verder met mijn nieuwe project maar daar staat de GMC van begin tot eind op! Super leuk dat je ook opzoek gaat naar een Van, als je vragen hebt kun je altijd bij me terecht!

@@FearOrFreedom t of man, wordt zeer gewaardeerd! Aanstaande donderdag komen er potentiële kopers voor de Jag. Hele fijne, snelle, mooie S-type R met 400pk. Maar niet zo heel erg praktisch. Laatst plinten moeten halen en die zijn 2,40m =( dan maar door het dakraam haha!

daviz1972 Yeah the lower arms are basically impossible to find new.. Even used they are getting increasingly rare. Also the vulkanised rubber bushing that runs through the lower arm always has play. I cut it out and replaced it for a solid shaft wayy better. Also replaced the rubbers that mounts the axle in the lower arm of course. Handles way better that way. Good luck!💪🏻

Adam Bomb I used 3” blocks in the rear (made them myself) and 2.5” spring spacers on the front. You need to cut away the bump stops for 3/4 above the upper control arm or it will rider very very rough. Give it a few weeks to set, in the beginning it will ride pretty rough but it will get better in a few weeks. Imo it drastically improves the handling, it doesn’t ‘dip’ as much in the corners anymore. Installing the spacers can be a huge pain, i suggest you undo the lower ball joint, jack up the van as high as you can and then insert the spring with the spacer, put a jack under the lower control arm and jack it up until you can attack the lower ball joint. Good luck!

@@FearOrFreedom Thanks for the reply that helps a lot!

@@FearOrFreedom Also are those tires 31's or 32's?

Adam Bomb 31X10.5R15 front, 31X11.5R15 rear. So 31”

Thanks for all the advise! I got my van done, it looks and handles so much better now. Did you get longer shocks? I think I need some. Go check it out on Instagram, @adambomb

rod reddick Please send me a PM on facebook: Vantasy Car Products. I will look up the parts for you that I used

Coil spring spacers for the front, lift blocks for the rear. Also longer shocks and driveshaft

I used coil spring spacers in the front. Bought them from ebay

My question exactly!! I hear that G30 HD springs will fit a g20 to lift the front end

So blocks an coil spacers how many inches?

Alex Lane I believe the spacers were 1.25 inches thick which gives 3” of lift. I made the blocks a little thicker than 3”, depends on the amound of weight you will be putting in the back to level it out. You could also add a leaf while on it, since most of the time the leaf springs are pretty worn. I don’t know about the G30 springs for sure, but that might work!

Around €8000 included purchase

TH700R4

@@FearOrFreedom Thank you!!!

I’m not sure what size I had in it, I sold the van a while ago. I did need to fabricate a frame to make it fit though

A few months if I recall correctly. But a project like that is never really 'finished' lol

31X10.5R15 in the front on 8J rim, 31X11.5R15 in rear on 10j rim

@@FearOrFreedom thankyou

31X10.5R15 front, 31X11.5R15 rear. Front rim 15” and 8” wide, rear 15” and 10” wide

JT Fore It’s already been sold, unfortunately. I do build custom Vans and Trucks for people so if you’re interested you can contact me at thijmen.duim@gmail.com

You know there's a slider underneath the video where you can turn the volume down? Have a nice day😉