My New Flats Boat

No video

My New Flats Boat

Рет қаралды 234,548

Күн бұрын

You can support the channel by using the Amazon Affiliate link when making purchases:
amzn.to/3fb8dfn
You can also donate directly to my PayPal:
www.paypal.com...
Follow me on Instagram:
/ thatboatguyofficial
Follow me on Facebook:
/ thatboatguyofficial
Follow me on TikTok:
/ thatboatguyofficial

Пікірлер: 139

@billiondollardan 6 жыл бұрын

What's the update, dude? Is it fixed?

@ThatBoatGuy 6 жыл бұрын

billiondollardan I installed the head and the motor wouldn't run still. After a leakdown test the motor needed to be opened up and new rings installed. I ended up selling the boat and motor because I really needed the room. The people who bought the boat installed new rings and it runs good. I lost the footage of me installing the head so thats why I haven't uploaded a video. Sorry guys.

@billiondollardan 6 жыл бұрын

Well, at least it's running now. I hate to see something like that just sit and rot. Hope you made a few bucks on the deal!

@matthewwhalen4212 5 жыл бұрын

Do you’ll sell motors

@hawkie333 4 жыл бұрын

Dang, Zombie Post. Glad to see such a new motor get a continued life.

@jesusisalive3227 4 жыл бұрын

There is absolutely nothing wrong with composite intakes, infact most times they are better because of the weight saving and they don't conduct heat and they don't corrode.

@unsaltedlife5998 3 жыл бұрын

For people who don’t do maintenance boat stands for break out another thousand, for us that do the maintenance it stands for freedom.

@TheDstark408 6 жыл бұрын

It's amazing to me how many people spend their hard earned money on boats and cars and then don't care of them. Really enjoy your videos, learn a lot. Please keep 'em coming.

@dwaynebrandenburg408 5 жыл бұрын

What you call smoke coming out of the throttle body is compression coming back through the intake do to intake valves not seating properly

@richie2dicks468 4 жыл бұрын

Exactly it spun over fast cause it wasn’t building compression cause the valve was open

@vdubbub1986 4 жыл бұрын

Or blow by. I don't know if it's done on outboard engines, but it looks like positive crankcase pressure. Quick trick would have been to soak the combustion chamber with transmission fluid to help break down the rust. Might help reseat the rings and valves.

@marzipan4993 4 жыл бұрын

Advantage #376 of having a 2 stroke over a 4 stroke, we have a 2003 mercury 200, and we had some problems with water in the fuel, the fuel water separator got completely saturated with water, and the motor just shut off, we drained the fuel lines, and installed a new fuel water separator and it ran like new.

@lt.dantaylor7185 3 жыл бұрын

well you did that obviously pretty quick after noticing and preventing further damage. dude let his sit for months.

@tedschmitt178 Жыл бұрын

It still amazes me that many people don’t understand that you also should NEVER run ethanol gas in a boat which gets used infrequently. Those are the people who don’t believe in maintenance either.

@cup_and_cone 5 жыл бұрын

Painful to see how the owner neglected and destroyed what was essentially a new outboard motor.

@shellbackracing3999 2 жыл бұрын

I feel like this motor was submerged at some point, and I can’t stress enough how important regular maintenance and flushes are!

@forbiddenvisuals 4 жыл бұрын

1:16 Nice S2000 in the backround haha

@jonscarboro123 4 жыл бұрын

For the love of the Lord, get a table to keep your tools on. I get anxiety watching you step on things...:)

@garylucas6511 4 жыл бұрын

Jon Scarboro oh, he will start using tables when he gets older and it hurts to bend over!

@auramsafaris-tanzania-east5632 3 жыл бұрын

hahahaaaa

@MrNino44 3 жыл бұрын

Very interesting video .

@exploreoutdoors3978 6 жыл бұрын

I like your new shop, nice change from your old garage probably, hard work pays off keep it up man

@kimdailey6881 6 жыл бұрын

Good luck with the new project boat.

@anthonylatronica5108 3 жыл бұрын

I would suspect this engine was overheated and this caused the subsequent issues. Composite intakes are far better than any cast metal. All new cars etc use them as they flow better and are less weight.

@wish2fish37 6 жыл бұрын

Cars have had plastic intakes for years!

@rprokopow 4 жыл бұрын

Exactly not poor quality. Its jyst normal in todays world. Like wtf u gonna do jump on the intake?

@jaredalexander3403 5 жыл бұрын

I love the way these boats look and good for fishing you dont ever see boats like this in cali

@richie2dicks468 4 жыл бұрын

No skinny water in Cali to fish

@michaelacres501 3 жыл бұрын

I love St. Petersburg!!! We stay there everytime we come down to Clearwater!!

@joemartin6439 3 жыл бұрын

Thank you for showing this broken Merc abused engine in salt water. You are great

@kenmazza1494 4 жыл бұрын

Good for you hope all works out for you I know you will figure it out

@daniellockwood291 6 жыл бұрын

all new cars use plastic intake manifolds and mercury put a single cam in for reliability, ease of maintenance and weight savings

@Jerry-sy8rd 4 жыл бұрын

Daniel Lockwood Yeah, right😂🤣😂

@seabreezeof 2 жыл бұрын

Moral of the story empty your water separator.

@Real.Alpheus 3 жыл бұрын

Perfect candidate for a leak down test. Those valves are easy.

@drumminsonlive9199 4 жыл бұрын

It’s a Pioneer I had one just like it and a 90 is a bit under powered a 115 optimax will push it around 45 mph. Nice boat...

@mathewdavenport593 5 жыл бұрын

Sea foam wd40. Done!

@daddski1 2 жыл бұрын

The only way to lighten a 4 stroke engine is with composites. Merc did not go cheap. They went 4 stroke. It looks like you have at least two valves stuck open, no guys its not just cuz of the cam rotation. Also, that smoke coming up from the intake when turning it over was because at least one or two valves were stuck open so was pushing everything back out the intake. Clear out the salt, new gaskets, machine shop and off you go.... Or lol put a real outboard on it... you know.. the proven type called a two stroke :-)

@Whalermansteve84 6 жыл бұрын

Man. U find all the nice boats in st Pete. Lol. I still know where a nice whaler is for $1000 that I may snag up next week. Hope it’s still there

@nelsonlima8968 5 жыл бұрын

Man I want to dream I have a little boat I'm a disabled vet one day I'm going to have my boat little one I don't want a big one one day I'm 62 years old let me see if I can get it before I die God bless you man I like your show

@johnwren3976 4 жыл бұрын

Look for a 176 Key Largo. Strong boat, low maintenance. One man operation & launching One of my favorites.

@jb41161 6 жыл бұрын

You need to just take out the valves and resurface them. Clean everythingelse. That's it.

@ThatBoatGuy 6 жыл бұрын

joanna bruno the whole head is at the machine shop

@themackguyverchannel7713 2 жыл бұрын

Looks like he has been running ethanol fuel. I run non ETHANOL only AND BLU STA BIL in the tank. 2015 40 four stroke. No problems so far.

@donaldandireneyoung3089 4 жыл бұрын

ThatBoatGuy...please update us on this refurb! Very interested in this one cause this is a great boat...thanks and be blessed.

@billyoung1338 2 жыл бұрын

2000 15hp evinrude 4stroke. No water at tell-tale, new impeller. Engine running i disconnect the water line going into a component where the 12” tell-tale line is also attached. Good water pressure coming out but nothing going through the component. Not sure what it is, a fuel cooler? Tried clearing with a wire, air and salt away without success. Any ideas? Next step is to take off component. Thanks

@robmitchell3633 6 жыл бұрын

You need some tables man! Get that stuff up off the floor. Make it easier for you to work.

@RichieRouge206 5 жыл бұрын

Nice boat. Like everything, made at low cost 😞

@SanSabath 4 жыл бұрын

How often should I empty my fuel separator? And do I just unscrew it and dump the whole thing?

@pitsmcgoo 3 жыл бұрын

the water is on the bottom just loosen the valve and the water comes out,

@toannguyen214dallas 6 жыл бұрын

How do you start the motor out of the water?

@ryanchampion8716 5 жыл бұрын

With a hose that plugs into the motor to pump water into it

@richie2dicks468 4 жыл бұрын

Sounded like it wanted to start Cause the valve stuck open so it had no compression and started spinning faster

@Brandewey 6 жыл бұрын

Tell huy to get the Honda S2000

@c.shoefish 4 жыл бұрын

You guys ever sell those Yamahas you build up? Really in the market for a 25-40 horse power 2 stroke tiller steer

@FreeAmericanSpirit 2 жыл бұрын

So what ever happened to this motor? Did you rebuild it? And what happened to the boat?

@fishmandad588 4 жыл бұрын

You just need to rebuild the motor and then u will have a brand new boat.

@AmericanConstellation 4 жыл бұрын

Sticking valves...Put some two stroke motor oil in the gasoline..put MMO on those valves and let em soak....Problem solved!

@curlcd 2 жыл бұрын

Nice s2000

@bigspoon8219 6 жыл бұрын

That's funny I have the same project boat but mine is done haha

@bakeot 5 жыл бұрын

That s2k tho

@blackcyops 3 жыл бұрын

what are you asking for the boat and trailer?

@brodyhennessy7385 4 жыл бұрын

Wish I had a mate I could go drop my motor off too for cleaning and tune up 🤦‍♂️

@KyleC0430 4 жыл бұрын

Do you all sell these tiller steer motors ? Need a motor for my boat 25 or bigger

@matthewgross6958 3 жыл бұрын

Seller clearly had more money than senses when it comes to boat maintenance.

@willster114 2 жыл бұрын

@ThatBoatGuy do you sell the boats you fix? is there a website or a phone number we can contact you at for some of these boats? I dont imagine you are keeping every boat for personal use. let me Know! thanks, P.S. ive been watching many videos just happen to comment on this one

@1Fine69c 3 жыл бұрын

Please flush your motors people. I dont understand why people dont do that when its such a simple task.

@hdman97 6 жыл бұрын

May have to pull the valves and clean or replace them

@adnanbegic7754 5 жыл бұрын

If its a 2015 what about the warranty?

@sbill474 4 жыл бұрын

Was that motor sunk?

@richardspengler1794 6 жыл бұрын

Are'nt those stainless steel valves?

@JeffWinter1 4 жыл бұрын

When eventually outboards go to full electric these motors will seem completely obsolete with the amount of work they require to maintain and fix.

@petertrout8140 3 жыл бұрын

What is the story on the Honda, my friend??? The car...

@giachica 5 жыл бұрын

do you ever keep these nicer boats or Jon boat for life?

@reaprrt 4 жыл бұрын

nice S2K

@fishmandad588 4 жыл бұрын

Give me an update on the motor slim

@daniellockwood291 6 жыл бұрын

why did you not hook the engine up to water

@evandickson19 5 жыл бұрын

Daniel Lockwood with all the work he’s doing an impeller is nothing. Also probably needed to be replaced anyways.

@richie2dicks468 4 жыл бұрын

Not to mention If it started he would’ve turned it off right away. It won’t hurt for a second. Then you know to go get the muffs and put water on it

@ovpearsonop 5 жыл бұрын

What make of torque wrench do you use?

@ianmangham4570 3 жыл бұрын

I use bicep

@philmcneal5891 3 жыл бұрын

Need to get a better lite.

@petertrout8140 3 жыл бұрын

Can you power wash the intake, lol???

@albierossouw3809 4 жыл бұрын

Thats why i never will buy a Merc only yammie and suzzie

@craftsmandude8916 4 жыл бұрын

Albie Rossouw etec

@devshewitt4809 4 жыл бұрын

And plastic intake isn’t them cheating out is techs improving less metal to rot bc of salt to bad we can’t get plastic blocks #hates salt

@jpwillkill 6 жыл бұрын

How much for the boat?

@sMFq11 3 жыл бұрын

Sounds like it hydrolocked

@devshewitt4809 4 жыл бұрын

Blowing out the intake like that is valve issue

@r.i.p.totheliesr.e.a4901 6 жыл бұрын

Is the boat and trailer for sale

@DuvalDashCams 4 жыл бұрын

Hey bud.. any chance you'd black board some ideas with my 140 evinrude.. free project I'm disabled and cant afford a mechanic. I can do the work it just takes me awhile in a chair.. making a handicapable bapting adventure for my bait and tackle company

@richie2dicks468 4 жыл бұрын

What’s the engine doing?

@DuvalDashCams 4 жыл бұрын

@@richie2dicks468 got a few issues.. trim motor motors working, been sitting a few years (2017) No power from switch to solenoid Turns over great.. If you search my name on F-b00k you can message me if your interested I could definitely use some guidance and basically someone to bounce ideas off really

@crankinbass5758 6 жыл бұрын

Whoever had this thing messed that pore merc up bad

@dzmalekvali1110 5 жыл бұрын

Clean them with acetone..

@davidd8435 6 жыл бұрын

That’s what neglect gets you.

@fgffishing6813 6 жыл бұрын

Dope

@cats400 6 жыл бұрын

Why I don’t recommend mercury outboards

@williamaichinger2358 5 жыл бұрын

I sure like my Mercury All motors have issues !

@richie2dicks468 4 жыл бұрын

Back in the day some mercs were actually made by Yamaha. Depends what model and year

@ramboassgoblin 6 жыл бұрын

That is an awesome job, I'm 19 and I live in tampa, I am really looking to get into the business, any tips on how to start?

@exploreoutdoors3978 6 жыл бұрын

Unless you really know engines, say from having a mechanic dad watching and learning from him when you where young, you'd want to take classes about that stuff

@JetSkiBuyFixPlaySellChannel 5 жыл бұрын

Or start off small with a cheap project boat or jet ski. You can pick up Kawasaki 550 standup jet skis pretty cheap and learn about two stroke engines working on them. Lots of info on KZfaq and Facebook groups that can help you out. Where there's a will there's a way.

@1TruePatriot 5 жыл бұрын

Exactly. This 19 y.o. should NOT do what "ThatBoatGuy" does and do a lot of useless work (in this Merc O/B's case) cleaning up rust and foreign matter in the intake tract WHEN THE VALVE TRAIN IS BROKEN! But he didn't understand that BROKEN METAL PARTS means it needs MAJOR WORK, so that "removing rust" on the UNBROKEN parts won't make ANY difference. Both "ThatBoatGuy" and anyone else wanting to work on engines, of ANY time, should READ SOME BOOKS on the subject. Like this one: www.amazon.com/How-Repair-Briggs-Stratton-Engines/dp/0071493255 Then, if still interested, see what your local COMMUNITY COLLEGE offers, in terms of coursework/certifications, etc.... Also (at least, in the 1990's) if you were a mechanic (they call them "technicians" nowawdays) at a Mercruiser dealer, the factory and/or dealer would pay to send the technician to "Mercury School" (or whatever they called it) periodically, to keep your training up to date. I'm sure other major manufacturers have similar continuing-ed. programs. Try contacting your local BOCES, as well. And there are good sources of education on KZfaq. Just not...this channel, which is more...entertainment based. Good luck! @@exploreoutdoors3978

@mmanut 5 жыл бұрын

Boat needs a motor with HP. Keep the damn motor, a 70 hp on that boat is useless.

@fpvhero8218 4 жыл бұрын

I agree why down size

@Ztof 6 жыл бұрын

Thats s2000 tho

@timothycole9232 6 жыл бұрын

@tarxantoo 4 жыл бұрын

Dude buy yourself a rechargeable stream lite 🙈

@stevewilldoitofficialfanpa9464 5 жыл бұрын

I had a mercury 25 hp I sold it for 700

@johnbishop1877 4 жыл бұрын

How the hell can u afford all of these boats

@bertofly9050 3 жыл бұрын

I wanna work for you

@rodneymatthews3944 3 жыл бұрын

Tehautsu makes them

@jeffkerr4249 5 жыл бұрын

Follow up Video?

@2fast4you25 5 жыл бұрын

Sorry but never seen water sip into the water separator from the outside, its a sealed unit. If the filter is not drained out then water will go into your fuel line and engine will start to missfire, outboards dont like water in the fuel at all. So this story about the filter been floded is not right. 👌👌👌👌👌👌👌👌👌👌👌

@richie2dicks468 4 жыл бұрын

Florida is really humid condensation can build up over time I haven’t seen it either but I could see how it could happen

@wsmvlogs3222 4 жыл бұрын

hey bro you what if i told you you could of gotten it start without removing the head! lol..... but what did you find

@maaxort6149 5 жыл бұрын

Cuánto cuesta un motor de 75 HP 4 Strokes?? O si tienes un bote como ese mándame el precio gracias

@tedschmitt178 Жыл бұрын

Here in 2023, they are about $9000 USD

@L8terdays 2 жыл бұрын

Hey Boat Guy. A much better brighter flashlight is cheap and easy to find. That Lary sucks. I have one. Good for nothing.

@tylerchile150 5 жыл бұрын

Can you contact me I’m in st Pete and have a motor I would like you to look at ??? Do you have Facebook or something I’ve tried to search for you there with that boat guy but no luck

@MsMrglenn 3 жыл бұрын

Dude buy a decent flashlight ffs

@williamaichinger2358 5 жыл бұрын

did you go to school to learn how to work on boats?

@BubbleBlower1 4 жыл бұрын

Bottle of gum out and she'll be fine 🙂.

@EG-mh4in 3 жыл бұрын

That flashlight is useless

@andrewwilson3663 3 жыл бұрын

Shame you didn't see it through. You might have learned somethng new for yourself and put something new on the channel. Viewers will only watch so many carb cleans, gear oil changes and impeller swaps...

@airlesscanvas2887 2 жыл бұрын

which anyone that has a boat can do