I curled to my mace and softly whispered "don't worry,you are still battle ready for me, don't listen to him..." while stroking it gently.

Question: Would you damage the edge to save a limb? Answer: Not if its an Albion.

Skall, the swords are made blunt as they are because India does not allow the export of sharpened blades.

2:22 That was a very impressive squeaky door impression :o

I like them for budget items in general. They are decent and useable if you have a small grinder to hone the edge typically.

but skal in a battle situation you're supposed to defend your edge with your own body before allowing it to take damage!

I own a Windlass Steelcrafts sword that I had custom sharpened and it was fantastic, it sliced through bottles and cartons like they weren't even there. Then I accidentally struck the 4x4 stand the bottle was standing on and the top six inches of the blade snapped off. It wasn't even a full-strength swing. I don't recommend them, myself.

I have a Kukri. It was passed to my great grandfather by a Gurkha he served with in Africa, apparently. Very nice knife.

Definitely in favor of more videos on individual manufacturers.

The company did explain the 1mm wide edge with the fact that it allows them to sell them to a much broader public and export them to far wider range of countries. I'm fine with that, I didn't get bent out of shape when I got my regimental kukri and saw that it was blunt. Calling it battle ready or whatever it was is of course misleading to say the least, but it's still a lot better than selling sharp crap, like all of these combat-/survival-/zombie- fantasy knife manufacturers do. That regimental kukri I bought once upon a time was flawlessly made, by the way, and once I took a file to the edge and then sharpened it, it turned into one of the least disappointing large knives in my collection. It was cheap, too, so it's not something I've felt I need to treat like a delicate little butterfly.

An honest and detailed opinion, as always. I like this review of weapon manufacturer. It would be great if you would do more for others as well. I think it can help a lot of people who are not sure which one to choose.

Throwing it out there skall, yes please more of these if you can. Always nice to have a baseline on manufacturers which is hard to find without a TON of bias behind it.

Yes!! Please continue making videos about the different companies available! I have no experience in sword collecting, so hearing the pros and cons of the major companies from someone like Skallagrim who strives to be objective would be super helpful.

Disclaimer: edge not included

"A sword is flying at me, but this sword cost a lot, look how good it looks, it'll be a shame if the enemy damaged my edge and- Aaaaaand there goes my arm" - The life of Medieval soldier according to windlass.

Definitely would like to see more of these for all manufacturers you feel like you have sufficient knowledge to talk about.

This is actually something I've been interested to hear from you. Cheers!

Windlass is a nice option for those looking for a specific type of sword they wouldn't usually collect and don't want to spend $400+ dollars on it. Also a great starting point for college students or other penny pinching HEMA practitioners.

I loved the style and honesty of the review, great job as always skall and looking forward to more product company reviews! I plan on getting the budget tatical gladius, but will defer to other companies for any higher end swords that i wish to buy. (I use them for hunting safety and protection in dangerous woods near where i live to conserve ammo for game.)

love these kind of videos please keep making them!!!

Over the years. Learn to appreciate your criticism and review well done

You should make a video about which countries have the fewer bans on weapons and which ones have the most.

great work skall I've been with you since you were at 5000 and the qaulity has remained the same over the years keep it up!!

I would LOVE to see more company reviews from you. +1 to that, definitely!

I like the little grin you made when that cut corner joke came out.

"kult of athena which i generally recommend because of the good prices and international shopping" yeah good prices u pay $200-$300 for a sword and shipping is $120 USD, kill me now

More videos like this would be greatly appreciated.

Thanks for the video, it was indeed interesting. Personally, I'd enjoy seeing your opinions on other manufacturers, and your picks of what items you would buy of theirs

Hold on a second, they're arguing that "Battle ready" means "Unsharpened" because in battle you could ruin a sword's edge by crossing it with another sharp edge?. So, in essence their whole argument is "would you have your sharp edge damaged in the battle?, no ,right?. That's why all swords were dull metal clubs, because if you had a sharp edge then it might be damaged, so better to have no edge to begin with, that way you don't get a weapon rendered useless in the middle of a fight...you go instead with an useless one to begin with". Holy shit do some people make no sense when inventing excuses....

I for one, would like to see more videos that cover specifics about the different manufacturers.

This would definitely make a good series. Thanks, Skall!

I'm definitely interested in more videos like this.

awesome review! great passion my brotha!

I appreciate your concise explanation!

We're people really not interested in manufacturer reviews? I would love to see more.

I would defiantly like to see more of this video type it was extremely useful; its good to know which manufacturers you can trust, especially for what specific weapon type. Are all the Windlass gladioluses bad? If so who is a good manufacturer of gladioluses and weapons from antiquity and the early medieval age which is my favorite period of to collect from?

More of these manufacturer history videos, please! :D

the pirate captains hanger they make is amazing. i cut into a grounding rod that i forgot to take out of the box my dryer came in. there was barely any edge damage, i touched up the edge for only a few minutes a couple days later and it barely looks damaged.

Thanks for the review - I have three windlass steelcraft swords so far. I don't do heavy cutting but the ones I have seem ok.

These are useful, please make more for the other companies you use.

You should do your opinion of cold steel. Haven't seen you review much of their stuff, great video as always, keep it up!

Good video Skall. To added to it, from my experience so far and from what I have heard it appears that Windlass's quality is improving as their newer lines so far appear to be of good quality. But I still need to run more tests on more of their swords. The Windlass Battle Cry line comes sharpened, the edge cuts out of the box but could be better as it is sharpened to a steep angle. From my tests with the Maldon Viking Sword I have found it to be durable, it was neither bent, chipped, nor was the finish damaged after many strong strikes into a 5in tree trunk. Also its handling felt good to me. I am planning to make a few reviews of different blades from the line, once the semester is over.

i have a cobra falcata that i used yesterday to go to work clearing brush and never chipped or dulled that much so i was pretty impressed

The Oakesshott type XIV is quite good, too and I am satisfied with the Erbach Castle sword as well.

I have several of their swords and the sharpening done by them is extremely sharp.

Can we get Hanwei next? I've been looking into their blades but I am very paranoid on brands.

I've had a Windlass rapier since the early 2000's. I've been pretty easy on it, but it's a very accurate thruster for someone of my limited skill/experience.

I've two Windlass swords, both came sharp from where I ordered them from. They cut just fine.

I used to own that Windless Shamshir you mentioned. I got it from MRL and it was called their Scimitar. It was very well balacned and fast and deadly in the hand. I loved it and regret getting rid of it. But you mentioned the guard being seemingly laquuered or something. Something else about the guard; I dropped my sword on my hard ceramic tile kitchen floor and th guard bent. So it is evidently made of pot metal or some other soft metal. But I still love it. I also owned the Cold Steel one which also made by windless has a brass guard.

Lindybeige made an entire video dedicated to explaining why hitting with the edge is often a good idea. He touched upon the brief points you made, among others. I recommend that for anyone interested in hearing more on that subject.

Very nice video, Mr Skall. Do a similar video about Del Tin.

I have a couple of their blades. I get the sharpening service done when I purchase them. They are pretty good quality.

I would enjoy more steel craft brand reviews

Just get them professionally sharpened! That's what I do and that works well!

I really like this video. Do more reviews like this. please.

I have the Sword of Roven (or European longsword) and their version of the Ulfbehrt. Both seem nice for the price. No major flaws or excessive wobbliness.

Skall, could you do a video on repairing rusty swords to usable swords. So tips on how to take rust off a dull blade, and sharpening it afterwards without harming it.

Skall, I've been looking over spears recently, and I have the same concerns about the design you were showing, where the blade is jointed to the socket and doesn't look reinforced. I was wondering if you could offer any advice on a few of their available offerings. Both the Greek and Euro heads look the best due to the central ridge running up a good portion of the length of the blade, giving a very sturdy design from the socket up. The Hewing spear is way too abrupt at the transition between socket and blade, but the Long Blade Hewing Spear has a longer transition.

Hey, Skallagrim do you know where i can the viking from your intro but without the name? i want to use it as my profile picture

I just received "The Dark Prince from" Dark Sword Armory. They are in my opinion nothing less that the Finest Forge on the Planet!

I remember reading a review on Cold Steel's Shamshir and the blade being reviewed had an almost faded "Windless made in India" stamp near the tang. So It's safe to say that Cold Steel = Windless + Sharpened blades.

Man, I want to play a weaponsmith dwarf right now! Nice job

As someone who's poor as f***, windlass's cutlass is my pride and joy, it cuts alright too.

Hey Skallagrim! Is there any chance you could do a video on the research of, "Bojutsu" I think it's called? I've been trying to search it up, but most of what I find is demonstrative youtube videos, but not much on history. Perhaps I'm not using the right search terms?

Gods, I love Kult of Athena. I've had nothing but good experiences with them.

What are your best options for Sabre reproductions for cutting? As in swords that can hold an edge and wont fall to pieces immediately? Are the universal swords 1853 sabres any good? Any input would be appreciated!

Could you talk about rapiers, Skallagrim? It's something I'm interested in and would love to hear what you think about them.

That background is so beautiful, I'd like one for myself =)

I believe another reason Windlass was founded was to make steady work for Gurkha soldiers who were retired or disabled

I always thought of them kinda like Hanwei. When they're good, they're okay. When they're bad, they're horrible.

I like, please, to have some more info or a link on that dagger you mentioned that could be bought on a limited budget.

Hey Skalla, i wonder, what the music in your intro ? c:

I echo your sentiments. For semantic purposes, I would say they are indeed Battle durable or Battle ready, but they are not Competition sharp. Over the years I've owned several Windlass swords, purchased through Museum Replicas or Atlanta Cutlery, and the selections I've made have been well-constructed pieces, despite lacking distal taper.

In the beginning of the video you talked about steel types, I was very interrested in that topic and want to learn more about the different steel types, so could you make a video explaining what type of steels are out there and what characteristics do they have?

Are there any manufacturers you'd recommend for buying a good quality transitional rapier?

I have Windlass' Sword of Tancred, and i must say, it came from the factory pretty damn sharp

Could you please do a video on what you think of Darksword Amory?

Have you tried their naval cutlass? I'd like to get one can't find a review

Hey skallgrim could you possibly take a look at hai to gensou no grimgar I really like it and wonder what your opinion on it is since it seems to be going for a sort of realistic feel rather than a flashy action one.

Hey I'm actually trying to start collecting Japanese and European weapons, and I was wondering, where should I go for high quality weapons. I live in the US and I know of kultofathena.com but are there any other websites you recommend

Dear Skallagrim, I'm trying to get into HEMA, but since I don't have much money I can't afford that expansive protection most people advise. Do you have any tips on where to buy cheap protection? The point is that I don't want any broken bones, bruses I can definitely handle. Also since I'm a For Honor addict, can you recommend any pole axes for me?

Indian export law dictates the edge thickness.

So, Skall, which manufacturer might you review next?

for those curious, 10XX steel is just carbon steel, some companies like zombie tools use a 51XX spring steel (I think the specific is 5160). As Skall mentioned the last 2 digits refer to the carbon content in 10ths of a percent. the 1060 mentioned has .60% carbon in the steel. The first 2 digits refer to the alloying elements.

How I got here from Jared Dines, I'll never know.

Their Viking type swords seem to be decent from my experience. I have several and have put them through hard use and they've held up. I have a couple high end swords but don't want to risk damaging them fighting so the Windlass swords are used.

please do more company review thoughts.like dark swords, ten ryu, maybe even swords of northsire

I've owned one sword by Windlass - their umbrella sword. I really liked the design. It had a long carbon steel blade that could be easily deployed with a button (as opposed to the short, stainless steel, screw-ins that you find everywhere). But ultimately, the umbrella barely worked and the blade was so thin and skinny that it was flexing under its own weight. I gave it one test stab on the box it came in and it went through nicely. But I really didn't trust how floppy and skinny the blade was. I also couldn't find any good reviews of the sword. Such as what it was made out of and whether or not it was heat treated. For the price point, I'd guess 1055 carbon steel and non heat-treated. I considered keeping it and doing a review so that there would be a comprehensive review on the product. But I decided not to since it was discontinued and I was really worried about the blade breaking. So I sent it back. Really a loss of potential. It was a darn shame.

Im looking for a cool wallhanger that i can take outside and cut some cans or whatever and not have it break. Ive heard generally good things about the bosworth longsword for its price point and im wondering if it would fit my needs?

not sure what your opinions on the accolade is but i think its pretty good. its my first sword too so that might be why i like it but it seems pretty good.

Their claims aside; are they allowed to export a sharpened sword?

Erm skall....can i ask for a request . Would ye kindly review the musketeer main gauche and rapier combo by windlass , please ? Kind regards and season's greetings 🙂❤

Thanks you made me buy one :)

Would it be possible to make reviews on Kaskara swords thanks.

Hey Skall, would you ever do another of your fantasy swords scrutinized videos? I really liked those. And if you would, could you do the Attack on Titan swords?

Can someone give me a few suggestions for sites to buy low-to-mid range price swords with more authentic items? I got a couple from this video and description but I wanted to see if anyone else had any to share.

Hey Skallagrim can you do a vid on sword breaker daggers?

I have a windlass steel craft 15th century German bastard sword so far my best sword yet, mine came professionally sharpened (most likely in the USA where I live and ordered it).

Well as you and others have pointed out if the edge was never to contact another edge, then the cruciform guards wouldn't have been in-line with the edge. I have two Windlass swords, the Eglinton Backsword and the Sword of the Thirty Years War rapier. I haven't sharpened either of them. The backsword is on the heavy side, though it appears within the weight range for an original, and has a rather chunky "edge." I keep meaning to travel the few blocks to the Royal Ontario Museum and see if I can compare it to the original on which it was based, but I just never seem to get there. The rapier wouldn't take a huge amount of work to sharpen as it has a thinner blade and more shallow geometry. The tempering on it seems to be fairly good as it's not overly floppy and returns to true, when bent perhaps 8" or more offline.

Could you make a video about the movie Hanibal (made by the BBC)?