My OX CNC is running, WOoT!

No video

My OX CNC is running, WOoT!

Рет қаралды 49,477

Todd Optional

Күн бұрын

Пікірлер: 38

@pfsmith007 7 жыл бұрын

Nice machine, thanks for posting. I can only imagine that it is very satisfying watching your machine cut. I'm hoping to be there soon.

@jeffbeck6501 9 жыл бұрын

Great video. I mainly like the concept of making your own brackets and parts for other projects, ...or for another CNC machine.

@stevenreynolds2580 9 жыл бұрын

Thanks for reply got all my parts now going for 1000 x 1000 9best for my work bench your vid very helpfull for ideas, will post pics of mine when finished

@bryanlemoniccle 9 жыл бұрын

I believe that the "extra digits" are keeping track of partial steps.

@MajikSpoon 9 жыл бұрын

Looks like you got it working pretty good! Awesome job man!

@JhonnyCake91111 8 жыл бұрын

Wow im super impressed by this machine is there by any chance you can do a step by step how to build it! I love your work

@pump4546 8 жыл бұрын

Hi Jonathan, Thanks for checking out this video.. I'm going to be making a couple of update video's on my Ox, it's had some up dates to it :) Here's a link to some step by step build video's put out by OpenBuilds.. Enjoy :) kzfaq.info/get/bejne/pLljZcVmmtXZgZ8.html

@markgrevatt4867 7 жыл бұрын

hi tod thanks for the info I'll check them out.

@markgrevatt4867 7 жыл бұрын

hi tod wonderful cnc router can I ask what the whole price for this build cost. As i would love to build this for a future project ounce my workshop is fully built. And up and running. You did a great job. And a decent size too I've subscribed by the way. Thanks in advance 👍👍👍

@costaaddict 7 жыл бұрын

Lovely machine, stumbled upon this by accident, but how does it cost so much? (not counting the router)

@basilenglish 8 жыл бұрын

Can you please make a video building one of these with the arduino side to, I can do stepper control off my pc but how to build one is hard to grasp for me and I so want to build one

@markgrevatt4867 7 жыл бұрын

never mind the question Todd just seen your comment to the same question. But am going to ask you buddy where did you get all the parts if I may ask I'm based in the UK. So not sire if that's going to make any difference with purchasing the parts.

@pump4546 7 жыл бұрын

Hiya Mark, check out this link link below. I've purchased all my parts from openbuilds.com and I believe ooznest. It looks like they have oX kits to! ooznest.co.uk/V-Slot?gclid=Cj0KCQjw3drIBRCOARIsAO-hZCnFh-hkmjv-36smsId_yLYf5NrqwxX4Nohb9cpjMpk82GrYcQ0IhJEaArLvEALw_wcB

@azrulharis1332 5 жыл бұрын

Nice, can i know stepper motor torque?

@stevenreynolds2580 9 жыл бұрын

Nice Machine, what size is it? Thanks for shareing Steve

@pump4546 9 жыл бұрын

Steven Reynolds Hi Steve, this OX is the 1500mm X 750mm...

@ryanbutler4785 7 жыл бұрын

Great video! I'm having trouble finding free CAD drawing software. I see in the video that you used Google Sketchup but when I go to their cite it appears they only offer free 30 day trials. I looked into SolidWorks but it is way over priced. Any thoughts on this? I appreciate the help.

@pump4546 7 жыл бұрын

I like to use "Draftsight", works very and its free draftsight.en.softonic.com

@jerrypetri 7 жыл бұрын

Why did you change your spindle motor from a Makita to the Bosch? Jerry

@pump4546 7 жыл бұрын

jerrypetri ... I originally started with the Bosch but switched to the Performax brand from Manards just because it can reach a lower RPM (10k), and it's cheap :-)

@northwestone1 9 жыл бұрын

Just finished my ox, same size as yours. but having trouble with the grbl settings. 750 x 1500 mm . xpro v2 controller board. 24v power supply and grbl panel, (also free). nema 23s all around x-y-z. when homing machine wants to go to back left position. should be front and left? I'm sure this is all calibration problems. any help would be awesome. Thanks

@pump4546 9 жыл бұрын

northwestone1 Yes, you should be front and left of your table. Their are a couple of different ways to reverse the desired axis. In this case the "Y" needs to be reversed. You can reverse ONE winding pairs, or you can set your "invert mask" ($2=2).. Check out this link for more info... I hope this helps :) github.com/Spark-Concepts/xPRO/wiki/5.-Troubleshooting

@northwestone1 9 жыл бұрын

thank you, i did fix the problem. i should have been more clear with the problem, i was referring to the homing cycle finding my limit switches on the left side and not the right as they should. all is good for now. next step cal the steps/mm on the stepper motors.Thank you for your assistance i do appreciate any advice as this is all new to me.

@chadwalker4873 8 жыл бұрын

what are your grbl settings? is your build on the openbuilds site?

@pump4546 8 жыл бұрын

+Chad Walker Hi Chad.. My build is not on the openbuilds site. Unfortunately I have not had much time to post my build there. I am going to be make a updated video to this one as I've made a few minor changes and learned a few things that I think some folks would find helpful. I can certainly pass my grbl settings, if you are on the openbuilds forum just send me a message and I will pass my settings on... I have to verify my current machine setting with what I have recorded.. I think I made a couple minor changes and have not noted them yet :) oops lol ... My user name on OB is The Todd