Your videos are great! I hope that you doing more of them
@DaveTheRPAGuy Жыл бұрын
Thanks =) I'm actually uploading one now about Blue Prism. I often find it difficult to make time for videos.
@imitry Жыл бұрын
@@DaveTheRPAGuy i think it's time to automate your routine by yourself. Type the focus funnel by Rory Vaden, super helpful information
@axelmuller19332 жыл бұрын
Thank you for your videos. I learned a lot from them. And they are fun to watch, too. I tried using the "Run JavaScript Function on web Page" action to insert the values from the Excel sheet and I was able to finish the challenge in about 800 ms. Seems to be faster than normal selectors.
@joevaran3 жыл бұрын
Thanks Dave, you really answered my question in the other video quickly!
@DaveTheRPAGuy3 жыл бұрын
I get motivated now and then hahaha
@anshumanp5753 жыл бұрын
Great video Dave !!
@Geekboarder3 жыл бұрын
Amazing video, so many nice tweaks that I can apply on my end thanks so much !
@GopalBhaire3 жыл бұрын
Awesome videos Dave 👍
@amanuelgashu21973 жыл бұрын
Thank you Dave
@ayazshaikh2043 Жыл бұрын
Hi, thanks for sharing your knowledge with us. It really helped a lot. I had one question. Can I run multiple flows at the same time?
@DaveTheRPAGuy Жыл бұрын
It used to be possible to do this with the free version. When I most recently tested this, it seems they have essentially disabled the ability to run more than one at a time. Maybe that has changed or maybe it will change in the future, but I kind of expected this limitation. I would imagine that with the paid version, there wouldn't be a limitation like this though.
@rameshbeta3 жыл бұрын
i did this RPA challenge in Power Automate Desktop With same scope in 178 milliseconds... cheersss
@DaveTheRPAGuy3 жыл бұрын
Nice!
@smac7712 жыл бұрын
HOW ??? !!!
@yvesaubry Жыл бұрын
I noticed in your video, the 'Set Delay time' status bar on the bottom of the window, is set to 100 ms. By changing it to 1ms, it will run faster. How close is it to the score of running the flow from the Console?
@DaveTheRPAGuy Жыл бұрын
It's still slower than in the Console. I don't remember if I tested this at the time, but since then I noticed that delay time setting. I used it a lot when automating minesweeper and it was fairly painful even when set to 1 ms and it seems like it is more an issue with going inyo subflows and such. They have made some performance improvements there but still slower than the console view.
@jimfuldner23383 жыл бұрын
As I experiment more with PAD, I noticed this too but I never got it to run as fast as 3 seconds. It did cut my original 80 seconds in half but nothing faster. I also noticed the text boxes went from being dark yellow when being filled out to a pale yellow but that's it. I'm wondering if it has do do with your PC or network speed to account for the time differences. Just an FYI
@DaveTheRPAGuy3 жыл бұрын
If only we could easily share code then we could compare lol
@jimfuldner23383 жыл бұрын
@@DaveTheRPAGuy I ran this flow again today .. although it did not run in 3 seconds, it ran just under 10 seconds - so much speedier than yesterday (40 seconds). It would be nice if this were more consistent but as the old saying goes ... your mileage may vary.
@DaveTheRPAGuy3 жыл бұрын
@@jimfuldner2338 Awesome! And you ran from the PAD Console? I did find my flow runs slower sometimes, but it was usually around 3 seconds. Are you sure you removed the waits from all the UI actions? Also, I don't know if your flow is exactly like mine or not, but the excel data extraction happens before my flow clicks the start button, though I wouldn't think that'd cause a slow down.
@jimfuldner23383 жыл бұрын
@@DaveTheRPAGuy FYI to your comment about "... If only we could easily share code then we could compare ...". You can highlight all your actions (CTRL+A), copy (CTRL+C) and paste into Notepad. It's JSON mostly with some preamble stuff at top and some ugly binary values for screenshots). I then created a new flow and pasted (CTRL+V) the entire contents of the Notepad file into the action pane and ... Viola - there's my original flow. So in a crude way, we CAN store our flows in simple text files. Makes for backing up, sharing and (dare I say) a method by which you can put your flows in a Git repository.
@DaveTheRPAGuy3 жыл бұрын
@@jimfuldner2338 good point! And I guess if you have subflows then they just go into separate files. I’ll have to test that!
@nareshkumar-qo9qy2 жыл бұрын
How to click last hyperlink in a table using PAD. I am having different parent links when i enter into each parent link that link contains different number of hyperlinks i.e., first parent link have 10 and 2nd one having 15 like that. But i want to open every last hyperlink of each parent link. Plaeses reply
@DaveTheRPAGuy2 жыл бұрын
Super late response here. I'm the worst. I would have to go look into this concept, but I would have more questions about what your purpose is in clicking the last hyperlink. I feel like there's more reason behind it that would help me to give a suggestion on how to accomplish it.
@nareshkumar-qo9qy2 жыл бұрын
@@DaveTheRPAGuy tanx for the reply. The last hyperlink contain data what i need. So i have to click each parent link and after entering into parent link, I have to click last hyperlink and extract data in it.
@Rocklipinhow2 жыл бұрын
Really loved it but tried to do the same thing in 2022 and it's only giving me errors
@DaveTheRPAGuy2 жыл бұрын
What kind of errors? It still works for me.
@Rocklipinhow2 жыл бұрын
@@DaveTheRPAGuy Thank you for taking your time to answer. It was just a mistake just like the ' in the video. I missclicked co"i"ntains instead of contains. I tried again and now it works fine. The videos about RPA challenge really saved me thank you.
@busrayetik50052 жыл бұрын
since the day before yesterday the page no longer exists. Does anyone have more info on this? Are they perhaps changing something up to date?
@DaveTheRPAGuy2 жыл бұрын
Looks like the domain registration may have expired. That’s unfortunate. Hopefully they renew it.
@DaveTheRPAGuy2 жыл бұрын
Looks like rpachallenge.com is back up now.
@arunyandrapati49103 жыл бұрын
Hi Dave, can you please make video for Mainframe Automation
@DaveTheRPAGuy3 жыл бұрын
Unfortunately I don’t have access to any mainframe emulators so that I could even test it. I have looked around online to see if there’s a free test version. Let me know if you know of one and I’d be glad to test it out.
@arunyandrapati49103 жыл бұрын
@@DaveTheRPAGuy thanks Dave for your quick response.❤️❤️
@prashantrai59113 жыл бұрын
My timing 3.3sec
@DaveTheRPAGuy3 жыл бұрын
Exciting to see it run that fast lol
@prashantrai59113 жыл бұрын
@@DaveTheRPAGuy bro I don't understand the selector concept,can u make a video on which you can show how to make selector dynamic
@DaveTheRPAGuy3 жыл бұрын
@@prashantrai5911 yeah I plan to make a video soonish about the Selector Builder. But if you’re just looking to make it dynamic, you can just put a variable directly into a Selector like %variablehere%
@prashantrai59113 жыл бұрын
@@DaveTheRPAGuy actually I don't understand like that brother,can u please make a demo video or forward the link of those video where selector is dynamic