Short tutorial how to tune satsuma engine. I have many other satsuma building tutorials so go check my channel if you have problems building car.
Пікірлер: 113
@awesomo92625 жыл бұрын
you are my hero!!! my satsuma runs perfect now thanks!!!
@CroPro89012 ай бұрын
Great guide. I didnt know how to "blindly" adjust valves like that, thanks!
@braydenon4wheels6295 жыл бұрын
I just built my satsuma and got it running and i did not know how to tune the engine then I watched this video and now I can tune the car 😃
@brunofernigrini9474 Жыл бұрын
You just saved my life, I love you
@generallasagna7784 жыл бұрын
I would suggest you screw in a techometer when you have the chance and put in a clock instead of the rpm meter becouse the techometer already shows you the rpms but other than that this is a nice video and i am just rambling by now... anyway it was realy helpfull thx
@void_xd430 Жыл бұрын
this is the best tutorial I've seen also how to get the car to start running in first place my doesn't even crank
@fd_trueno18053 жыл бұрын
Thank you so much dude, now why car doesn’t blow up after 5 minutes.
@michaelmoskal49715 жыл бұрын
Thank you. This video helped me alot.
@OwO_X3_4 жыл бұрын
boom super smooth 64 hp nicely done!
@jasperdomacena64912 жыл бұрын
they should do an update you don't do valve lash adjustments on a running engine, it is impossible and it will spray pressurized oil all over the place! 😂 it should be done on a cold non running engine using a feeler gauge to know if there's too much or too little gap between the rocker arms and valve tappets but yeah you use a screw driver and a 12 or 14mm wrench to adjust it. Distributor Advancing or Retarding is spot on. there is a locking screw you advance the ignition until it starts to knock then retard it until you get the highest rpm. Carburetor AFR adjustment is an art though. it's not as easy as turning just 1 screw 😂 since it's not as "Simple" as to how electronic fuel injection work on Carburetors you have to adjust 3-4 Mixtures Screws or sometimes Jets (jets are basically tiny screws that has a hole in it) jets have different sizes of holes (bigger hole more fuel, smaller hole less fuel) then after any alterations the only way to tell if you have the AFR settings and Ignition Timing right is to check the spark plug and HOPE YOU DID IT RIGHT THE FIRST TIME.😂 it is a very complex task to do without an AFR Gauge and a Timing Light to do the checking for you. then you have to put it on a dyno to do precision "almost unnoticeable" adjustments to get the most power out of the engine.
@samjb782 жыл бұрын
….. this game is a simulator of life in Finland in the 1990s! There won’t be smart stuff like that, yes some things are out of order, like the taking cover off. But automated technology is not going to be implemented.
@Emm928 Жыл бұрын
no one cares
@ilikememes78243 жыл бұрын
Not all heros wear capes. Some make my summer car videos
@ivapir0042 жыл бұрын
Dám dude your tips are making my gameplay super SUPER cool thx man
@ivapir0042 жыл бұрын
My car after i did lil mistake: A PUM KALAKAK- me: no *fix* My car: son or a bi-
@joonamatic3 жыл бұрын
Thanks for help My satsuman Works well
@pompek77452 жыл бұрын
Thank you so much for this tutorial.
@DonutsAreOP3 жыл бұрын
Thx man now I now how to tune my satsuma
@magic_salam Жыл бұрын
Thanks bro very helpfuly
@bencrosbie5 жыл бұрын
My engine blue up as soon as it stated first time. Holes in the block
@rockergta52185 жыл бұрын
No oil
@charliemaahs42003 жыл бұрын
Or timing on the crank gear wasn't lined up
@charliemaahs42003 жыл бұрын
@@rockergta5218 I ran my engine for 1 min without oil and it is still fine?
@nic_the_grekk02623 жыл бұрын
@@charliemaahs4200 please dont
@damiannunez22002 жыл бұрын
I still can’t tune it because I’m trying to fix the ticking but my engine randomly turns off and I’ve started my engine 200 times trying but I can’t
@Mangroveamin3 жыл бұрын
my satsuma can't idle properly even i push her choke this happens when i changed her racing carb into twin carb.this problem is so important that i can't properly tuned up the engine even the engine temperature is normal.
@tamperneezy36623 жыл бұрын
your distributor might not be tuned right or could be broken
@Mangroveamin3 жыл бұрын
@@tamperneezy3662 i just forgot to change its spark plug lol
@strandedsurvivor78885 жыл бұрын
what if your engine doesn't start in the first place.
@grizzofeu6535 жыл бұрын
I have this problem, I try to start my car, it does whining noise, and then the engine stops and can't try to start it again and the power goes out too
@strandedsurvivor78885 жыл бұрын
Doctor Grizz, the whining noise you experience is because the alternator belt is too tight. However I found the cause of my problem after removing the valve cover and finding that a couple of the valves didn’t have any springs on them, which is a pain.
@grizzofeu6535 жыл бұрын
Thanks
@karsonhevener87735 жыл бұрын
I straight up forgot to buy and put in spark plugs
@mspaint63132 жыл бұрын
Scroll up to loosen, down to tight... I keep forgetting that...
@stanley42906 жыл бұрын
Im gonna ask you, is the valve adjustment for most performance? Do you know how to tune for most hp? Or you maybe have a msceditor value for best setting?
@randomstuff54476 жыл бұрын
I have tested different valve settings and by feel this what i show on video is the best for performance i have found. I dont know any msceditor values.
@stanley42905 жыл бұрын
Ok, thank you very much for the answer :D
@aca52564 жыл бұрын
@@randomstuff5447 i adjust carburator but fuel mixure still shows 09.9 and 10.4
@normanlandstruck39852 жыл бұрын
Tighten the exaust valves one or two ticks extra to increase compressions a tiny bit.
@drny86052 жыл бұрын
Thanks u very much, my car ride like devil 🤣😍
@Daniel-uv5nx5 жыл бұрын
whenever i try to go it gets to like 20rpm then just shuts off and backfires
@davidjurik81054 жыл бұрын
Fuel pump 350mk change and its Like new
@trevor48575 жыл бұрын
when I move the distributor no ticking sound happens
@rileyburns85743 жыл бұрын
Same
@Akotski-ys9rr2 жыл бұрын
What is going on? The engine was running perfectly fine but I wanted to check the coolant and when I opened it I got blinded so I saved and reload and now my car has zero power like the battery is dead even though it’s charged
@Torth1214 жыл бұрын
Thanks bro, works like a charm. Sub + Like
@isaacsrandomvideos6672 жыл бұрын
I don’t even know why I’m watching this my satsuma runs relitevely well. It’s hard to kill it. Really hard Also I’ve got the DCOE carbs on.
@casperholm785 жыл бұрын
Thanks man!
@peltihattu3 жыл бұрын
im unlucky i dont even get car on
@Legendary_Frank3 жыл бұрын
The issue with mine is I have the donner turbo and ecu and I am having trouble driving it cause if I gas then shift into first I could blow the engine
@motorenbastler92896 жыл бұрын
I need help, my car runs, but now i didt run anymore and i don't know what to do.
@MrPateu3 жыл бұрын
you are real helpfull
@isaacsrandomvideos6672 жыл бұрын
Mine never heats up And then when it isn’t cold it’s on fire
@SuperNintendoPlaya6 жыл бұрын
after tuning, my car doesn't start. Even if it has full on everything.
@ballsin3d2053 жыл бұрын
if you are using nitrous the spark timing may be the problem
@Torth1214 жыл бұрын
I do have a light grey smoke out of the exhaust though its not big just small. Is that normal?
@luminescent922 жыл бұрын
You want your smoke to be near transparent.
@RichTexas825134 жыл бұрын
How much is a mouse step?
@drifter6972 Жыл бұрын
mine doesnt stay on very long
@33axsu2 жыл бұрын
my piston always break when i try this what do i do?
@kardaanipauk4 жыл бұрын
very helpful!
@BaLar_7 ай бұрын
thanks
@kevinfreccero3894 Жыл бұрын
My satsuma catch fire hahahahaha
@Kilbot1924 жыл бұрын
What's the difference in performance between a lean mixture and a rich mixture?
@hugieboi53014 жыл бұрын
Torque and horsepower
@mustafabostanci6423 Жыл бұрын
Rich mixture means more fuel given to the every piston movement. Basically more fuel / more power but less fuel efficient.
@zawggy4313 жыл бұрын
boi,this helped!
@vuggie51004 жыл бұрын
nice thank you
@staryardumian6205 Жыл бұрын
hehe funny story uhh.. i tried starting my engine too much and i broke the rocker shaft :/ help
@eddynoob67995 жыл бұрын
what should i do if the car started emiting a white smoke after i tuned the valves?
@ethanperreault74705 жыл бұрын
Not a car expert, but I believe that may be a head gasket problem... Here is the way to replace it - Buy a new head gasket, from Fleetari. Then use this to get down to the head gasket (Remove in order) - airfilter - rockercover - electrics - unscrew bolts connecting exhaust pipe with headers - top radiator hose - cylinderhead - headgasket Now just reverse until you get everything back on. You should confirm with others that this is what is actually happening. This is just an educated guess from somebody when is an intermediate armchair mechanic.
@thecheekibreeki31974 жыл бұрын
air mixture too lean
@ethanperreault74704 жыл бұрын
@@thecheekibreeki3197 Or this, if its mild then probably this if you've tuned a carb before than you can tell the afr by the color of the exhaust. But I wouldnt believe it to be concerning him visually if it was just too lean.
@naoki75664 жыл бұрын
Thks
@czechslavicvideos4 жыл бұрын
I cant do it, my Satsuma keeps dieing
@googleaskmefornamee90323 жыл бұрын
Nauč se to děcko
@czechslavicvideos3 жыл бұрын
@@googleaskmefornamee9032 :facepalm:
@Ben-pz5hb7 ай бұрын
Ran out of fuel while tuning :/
@thedeere10125 жыл бұрын
How is this compared to what fleetari will do is it better for performance
@michaelmoskal49715 жыл бұрын
Well you can do it yourself for free or pay Fleetari to do it for you
@mahuba25535 жыл бұрын
what does adjusting the valve do to the car?
@DaisyHead6665 жыл бұрын
IT makes it so that the car brings in air, and fuel in the best way possible to allow the engine to run at peak performance.
@jarnowitte44614 жыл бұрын
@@DaisyHead666 Also to get rid off the exhoust fumes
@nahkaremmi69174 жыл бұрын
my car doesnt run idle so i cant do this
@fugg35435 жыл бұрын
Thanks
@j.pgaming54694 жыл бұрын
What dose the red light on the dashboard mean
@hugieboi53014 жыл бұрын
It turns on when the revs are low, basically warning you it might stall if it's cold
@hugieboi53014 жыл бұрын
I think
@juppe28953 жыл бұрын
my satsuma doesesnt work ;(
@jessegeary24666 жыл бұрын
I keep trying this but my rockers keep breaking
@randomstuff54476 жыл бұрын
Does your valves tick all the time?
@2stroke2smoke506 жыл бұрын
RandomStuff i cant even adjust it, the springs keep jumping away and my engine keeps breaking.
@xXGAMESPROXx5 жыл бұрын
adjust your camshaft
@michaelmoskal49715 жыл бұрын
While building look for camshaft gear. It has a mark on it and needs to mach with mark on block. Hope i helped
@Ward5hofie3 жыл бұрын
Soo I tuned my carburator to around 13-14 but for some reason when I start the car the fuel mixture is at 16-17
@SimpCatcher3 жыл бұрын
Because when you tuned it the engine was warm, once the car warms up it should go back down.
@gruiaarfire28876 жыл бұрын
but if i don t do this my car will work ?
@randomstuff54476 жыл бұрын
Probably it will work, but performance and idle can be terrible. You can also take your car into repair shop and get it adjusted there.
@gruiaarfire28876 жыл бұрын
ok thx
@seba203pl36 жыл бұрын
in the video you writen (because not said) that the timing you showed deosent work with nitro, so whats the timing for it to work because it has no effect the only thing that changes is the rining nois of the mixture exploading back into carbulator
@palovalenta88355 жыл бұрын
Hi! I have problem when I turn off the engine I hear rattle, ticking, I don't know how to fix this problem. Can you help me ?
@bradiechapman79944 жыл бұрын
Palo Valenta it’s normal for that to happen
@savannahblankenship54514 жыл бұрын
If you pop hood you can tell it's either the radiator fan slowly coming to a stop or just fluids draining to the oil pan. A very nice touch, And a very realistic sound to accommodate the game
@majkel37025 жыл бұрын
What is this clacking at 3:59? I
@azan54745 жыл бұрын
thats just the engine cooling down. cars in real life do that.