No video
STEELFLEX SUPER SLICK 2000 BOTTOM COATING EPOXY - 1436 Jon Boat Project Build
Рет қаралды 25,378
Күн бұрынJoin the community on Discord: / discord
- For this video I water test and seal the bottom rivets on my WACO 1436 Jon Boat using Fasco Steelflex Epoxy. Check out the end of the video for final thoughts and things I would do different. If you have any questions about the process, drop a comment below! If you want to follow along with the Jon Boat build, don't forget to subscribe. Thanks for watching!
Follow us on Instagram: @MVBOutdoors
/ mvboutdoors
---Product Links*------
Super Slick 2000 Epoxy Bottom Coating - amzn.to/3HDfYKz
3M Pro Grade No-Slip Grip Sandpaper - amzn.to/3DGgKUO
---Related Videos------
How To Repair / Add Bow Eye to Aluminum Boat
-- • REPAIR / ADD BOW TOW E...
How To Remove Jon Boat Bench Seat
-- • REMOVING JON BOAT BENC...
Jon Boat Transom Rebuild
-- • Jon Boat Transom Repla...
*Orders through the Amazon affiliate links above provide us with a small referral commission at no cost to you. Using affiliate links in no way affects our opinions expressed on this channel and merely serve as a method to help this channel grow while still providing useful, relevant information. ------------
#jonboat #boating #fishing
@mvboutdoors 2 жыл бұрын
0:22 - Leak Test 01:14 - Bottom Prep 02:20 - Epoxy 03:25 - Results 04:12 - Tips and Suggestions
@SouthernRancher13 4 ай бұрын
just curious, I have some of that steel flex but I only need it for a little section. Can I make an equal smaller amount and be OK?
@mvboutdoors 4 ай бұрын
Yep, just make sure to mix to the correct ratio and you can do any amount
@michaelpayne8691 2 жыл бұрын
Did you paint over it? What paint? Did paint stick?
@mvboutdoors 2 жыл бұрын
Yes, I painted over it with white enamel, it stuck well -- gave it a light sand before painting. The only places it's come off has been from wear and tear, not peeling. I like having it on the bottom so I can see where the steelflex is wearing
@atrboi8171 2 жыл бұрын
Where did you get the superslick all I see on Amazon is steelflex
@mvboutdoors 2 жыл бұрын
It looks to be out of stock right now, this is the listing I purchased from: amzn.to/3HDfYKz
@straightwhitemale5753 Жыл бұрын
How strong would thing be against scratches. Being dragged against rocks and concrete alot?
@mvboutdoors Жыл бұрын
It would provide some additional durability but it's still epoxy so it will wear down. The upside is you can always apply more!
@straightwhitemale5753 Жыл бұрын
@@mvboutdoors Exactly. Lol I've been trying to decide between epoxy and truck bed liner. It's gonna be excessive dragging. I can't use a boat ramp and I will have to drag it either up a rocky slope and a small concrete hill.
@billedwards8755 2 жыл бұрын
why didnt you reset the rivets? it only takes two guys and an hour to reset a 16 ft john boat and stop the leaks . its easy to do and better than paint
@mvboutdoors 2 жыл бұрын
All of the rivets were re-bucked prior to the bottom epoxy. 👍
@oldhippiegirl2137 2 жыл бұрын
👍😎🌻
@atrboi8171 2 жыл бұрын
You only use 1 pint? I have a 12ft I was gonna get 2 orders but seeing you have a 14ft maybe I only need 1
@mvboutdoors 2 жыл бұрын
I wish I used two, it would have been a more even coat. I stretched it with one but with a 12ft you might be okay.
@atrboi8171 2 жыл бұрын
@@mvboutdoors im just get two better to be safe then sorry since I'm gonna do it mindest well do it right 😅
Obi Ski TV
Рет қаралды 4,1 М.
Олимпийскому чемпиону Елдосу Сметову и его тренеру вручили ключи от квартир и машин в Таразе #Сметов
KAZINFORM
Рет қаралды 835 М.
Harley Quinn with the Joker
Рет қаралды 27 МЛН
Take’emTv
Рет қаралды 2 М.
Backwater Boat Rehab
Рет қаралды 30 М.
Chattanooga Fiberglass
Рет қаралды 7 М.
Care Again Fishing
Рет қаралды 3,1 М.