N54 V2 Precision Raceworks Fuel Filter/Regulator Install

Рет қаралды 2,337

Жыл бұрын

This is Precision Raceworks new V2 IN-TANK FILTER/REGULATOR. This significantly increases fuel low on your low pressure side. By utilizing just this filter/regulator your single pump will achieve 37% more flow and dual pumps will yield a 43% increase. Precision Raceworks also makes various regulator upgrades to pair with this tophat. By using their return style regulator upgrade with this tophat you will gain a 99% increase in fuel flow. This would be like going from a single 450 Walbro to dual 450's.

Пікірлер: 9

@tronn_carter 10 ай бұрын

Great vid

@n54_andy37 6 ай бұрын

Is there an boost line needed to connect with the regulator ? Or does it works exactly how you installed in this video without anything connected to the regulator (I mean this small next to the fuel line connection)

@n54enthuziast66 Жыл бұрын

So right now I am running single walbro 525 (bucketed) If I get this thing will my 525 perform better? Right now it's droping lpfp pressure down to 36psi.

@HAMinc Жыл бұрын

Most likely your pump is getting weak. My 450 was getting weak when I installed this so I was only seeing about 55-65 psi. After a new updated style 450 (higher pressure) the pressures are perfect. And yes, definitely beneficial especially given the fact it’s a 525. They pull much more amps than a 450 therefore straining the EKP. With this your amps drop quite a bit. That being said it will also aid in additional fuel flow given the factory filter/regulator is a major bottleneck

@amadorvelazquez5618 Жыл бұрын

Any updates on how it performs?

@HAMinc Жыл бұрын

Performs great. No issues so far other than the updated bracket they sent me to prevent fuel leakage. This is described in another video. Have definitely had better flow and seen less timing pulled throughout the pull