The Ultimate Ender 3 - Creality Ender 3 V3 Plus
Рет қаралды 13,714
Күн бұрынJLC3DP 3D Printing & CNC Service Starts at $1,Get $60 for New Users:
jlc3dp.com/?from=nbr
Creality Ender 3 V3 Plus and K2 Max: shareasale.com/r.cfm?b=201599...
On Amazon: amzn.to/4aLTLr6
My Patreon: / nathanbuildsrobots
PRUSA MMU: www.prusa3d.com/#a_aid=NBR
Today's Watch: Casio Classic G-Shock GWM5610-1 amzn.to/3wKVIG3
My Store: nathansellsrobots.com
Discord Channel: / discord
The links in this description may be affiliate or tracking links. I may earn a commission on sales made through these links.
Thanks to JLCPCB for sponsoring this episode.
Thanks to Creality for sending this printer for review.
Creality Ender 3 V3 Plus
0:00 Intro
3:05 Creality Print OrcaSlicer
4:40 Compared to the smaller Ender 3 V3
6:37 Filament and Wire Path
7:33 Core XWhy
7:58 Early Firmware Underextrusion
10:05 Hotend and Extruder
11:04 Differences from Ender 3 V3
15:18 Speed Benchy Closeups
20:00 Someone else do the rest of these Im bored
@hrdcpy Ай бұрын
The under extrusion on the cheater test print reminds me of VWs diesel-gate situation.
@hrdcpy Ай бұрын
Thanks for validating.
@NathanBuildsRobots Ай бұрын
Oops, haha look how well it performed on this test! Lol? We didn’t do it on purpose, pinky swear
@sevagjb Ай бұрын
thanks Nathan, very honest review
@limatronic Ай бұрын
Very nice review! thanks.
@speedy3d524 Ай бұрын
Nice review
@mortenkallesen923 Ай бұрын
Looks like what the S1 Plus should have been.
@user-vx2zt1wm2c Ай бұрын
That thing must be huge to get your head through it. Lol
@IvanJoel Ай бұрын
Great video! Looking forward to the Mmu3 video. Someone really needs to make a better solution to hold all the filament spools though.
@TheButchersbLock Ай бұрын
Very thorough video mate. 👍🇦🇺😊
@KAKAFU Ай бұрын
I bought the K1C .. so I'm good for awhile BUT might also get the MAX next ..lol
@NotDoingThisToday Ай бұрын
Looking forward the one and only printer from Nathan in a few years!
@TNX255 Ай бұрын
You mean the NBR Quadrupolar Express Pro V1 Basic SE Chunky It Just Works MAX?
@raphofthehills4405 Ай бұрын
Very disappointed that no fan was thrown over the balcony and replaced by a 4x larger Noctua inserted by force through a nibbler-hacked hole... But, to be fair, within a few minutes we saw drilling into the chassis to relocate the spool 😅 So there's that !
@anthonyz.4560 Ай бұрын
An idea to solve the screen is maybe print a bracket to move the screen to the side of the bed with an ribbon cable extension.
@3DandTeePrinting Ай бұрын
209 hours on it and other than the noisy stepper driver at slower speeds it has been great.
@petercallison5765 Ай бұрын
The Neptune 4 Max has no problem with a speed benchy but does it at 20 minutes (you really need to check layer height and number of walls for a proper comparison). the acceleration is only 8000 but this will print more than twice the speed of the CR M4.
@SuperYanhan Ай бұрын
i skip V3 and V3 plus, gonna go for K2 max
@MattPD Ай бұрын
FYI I just recently got a standard size ender 3 v3, and the top holes for the spool holder are missing on this rev. Spool clamp thing is injection moulded now too.
@NathanBuildsRobots Ай бұрын
Interesting. It looks like they stopped drilling that out to save cost. It sort of makes sense as it would require an additional setup in a CNC machine to perform that operation, and isn't exactly a feature that people are looking for when cross-shopping. But on the Plus, since it has the braces to make the vertical frame super stiff, it totally makes sense to put the spool holder up there. Hopefully they come around to the idea.
@25252525etrexft Ай бұрын
If creality makes the bed lighter it may lead to warping issues or it would be a very expensive BED slinger.
@NathanBuildsRobots Ай бұрын
Why don’t they just make it out of carbon fiber 🥸
@jameskellam2980 Ай бұрын
You kept talking about the size of bed slingers, but I did not hear the size of prints this printer makes. I may have missed it, if so, sorry. Ok. i saw it at 5:20. Great video btw.
@svengeres92 Ай бұрын
Have it next to the A1 and P1P. Needed it for the size but straight lined walls are cleaner on the A1 and P1P. Probably because of the wobbly head of the V3 plus. Any change we can change the rods for carbon to make it stiffer like on the P1P?
@andreasu.3546 Ай бұрын
2:36 "He didn't write his name on here, that seems like a missed opportunity" - At the same time, there's a huge raised pod in the middle of the print that says "3D PRINTER TEST by Marian Trpkos". - Am I missing an inside joke here?
@TNX255 Ай бұрын
Perhaps the joke was that the name is very hard to see unless you enlarge the print that much? I'm just guessing though.
@heatedpoolandbar Ай бұрын
My understanding is the filament run out sensor only detects a change in state so you might not need filament in there at all and or be able to leave it disconnected. I'd love to know the answer for sure. Also, I'm excited about this printer and I want to buy it but I think I should wait maybe 6 months for software and publicly available profiles and tweaks to catch up.
@NathanBuildsRobots Ай бұрын
It’s a limit switch just like any other it can tell if it’s on or off. But if they implemented firmware to only care about state changes, that would be neat
@The-Soulless Ай бұрын
Hey man, does the quality get better if you turn down the speed to a normal speed? Or should i put more money into it and buy the k2 plus?
@MrBaskins2010 Ай бұрын
they could solve the bed blade issues by putting a long metal tab on the left of the bed. most users are right handed and the screen is on the right side of the printer
@NathanBuildsRobots Ай бұрын
I like that idea. But still, the screen is in a bad spot since the bed moves directly over it
@das250250 26 күн бұрын
The flow is proportional to the print plastic, it is tunable for each spool and for each type / brand. I am not sure it is a function of the machine ?
@MrUniq 29 күн бұрын
As of this date, Microcenter is running a massive discount on the regular Ender3 v3 .. I got mine for 279...so I guess this plus verssion is the reason why. I mainly got it because they are klipper based machines, I assume I'll eventually be able to take full control of it software wise...and it's kind of a bargain for the all the included parts.
@johnkavouras2355 24 күн бұрын
How does this compare to the Ender 3 V3 SE?
@ZZZFest303 8 күн бұрын
Does it make any difference where you buy? Third party or direct? I saw these on Ceality's website for between 500-600 dollars.
@jrmh096 7 сағат бұрын
Hi, I am looking at this printer because i want to print tall props. you mean this still has Z banding issue ? I’m hoping it will solve the issue
@ToxicXzombieG Ай бұрын
Replacing the bed carriage and heat bed with a carbon fiber plate would speed it up a good amount
@NathanBuildsRobots Ай бұрын
Yeah it would be a speed demon with a carbon bed mod
@ToxicXzombieG Ай бұрын
@NathanBuildsRobots I'm doing it on my max neo and I doubt it would be more than 150-175 for both the bed carriage, bed and a bed heater the lh stinger has a custom flex pcb heater that if scaled up would be better than a silicone heater
@KaitoKaze 26 күн бұрын
I can't find the slicer at all online, the 5.3 on github doesn't have the profile for V3 plus, do you have any link or file in your usb?
@NathanBuildsRobots 25 күн бұрын
I made a custom profile. It’s the k1 max profile but slower. Hit me up on discord if you want me to send it to you
@artplus5757 Ай бұрын
What's the filament you used for Benchy? It's sliced for HyperPLA!
@NathanBuildsRobots Ай бұрын
I used blue hyper PLA and white hyper PLA
@kitcarlson6033 Ай бұрын
You seem more mellow.
@NathanBuildsRobots Ай бұрын
REEEEEEEEEEEEEEEE!
@oldman1944 Ай бұрын
They seem to be stuck in the era of 3D printers being for tinkerers who enjoy tuning flow rates and tightening all the screws. Times have changed thanks to Bambu, and it needs to be assembled and tuned properly out of the box from day 1.
@NathanBuildsRobots Ай бұрын
No necessarily, this was faster to assemble than the A1, and the setup and calibration is fully automated. The cable management and filament pathing works fine, but it is sort of lazy IMO
@oldman1944 Ай бұрын
@@NathanBuildsRobots Fair enough, but I'd argue that automated setup and calibration should deliver you a good print without intervention, not an under-extruded one, or on my Creality a z offset that is way too high for decent adhesion. These are simple, fundamental things that should be fixed in alpha versions, not shipped ones.
@artplus5757 Ай бұрын
About that plate hitting your hand... why not using it via wi-fi. Only thing I use the display for is to retract filament when I'm changing spools...
@NathanBuildsRobots Ай бұрын
I don't like messing around with wi-fi. But the wifi integration on all the latest creality products is very good
@darenlim1584 Ай бұрын
Writing it on the print wasn't missed: 3D PRINTER TEST by Marián Trpkoš is what I can see at 2:43
@NathanBuildsRobots Ай бұрын
Oh, there it is. I was looking at the front face that says 3D PRINTING TEST
@countryboy4247 Ай бұрын
If the printer profile isn’t in the slicer, did you just edit the bed size in the slicer? Purchased this printer end of week last week and expecting it to arrive end of the week
@NathanBuildsRobots Ай бұрын
I made a custom profile based on the K1 which is the same size. It’s annoying that they don’t have everything figured out for their customers from day 1
@countryboy4247 Ай бұрын
@@NathanBuildsRobots can you share your profile settings?
@kreinova2747 Ай бұрын
How do we mod existing printers with K1C E3V3 series Unicorn nozzle. I would like to thinker with that. I replaced the hotend on my CR-10 SE before but was thinking if i upgrade it unicorn nozzle now there is no blob of death problem anymore
@NathanBuildsRobots Ай бұрын
You would need a new hotend and heatsink. No idea if creality plans on making an upgrade kit for the older Ender
@kreinova2747 Күн бұрын
So if the connector is the same, or at least the specs is the same and mod that connector, then without different software or firmware for that extruder board, it might be possible right ?😂
@jorel973 Ай бұрын
I have to ask if I heard you correctly, you use the 4 kg bin as a bed pan or does that mean something different in the USA ?
@NathanBuildsRobots Ай бұрын
Idk I keep my 3D printer beds in there
@petercallison5765 Ай бұрын
@@NathanBuildsRobots That is a relief to hear, almost as much relief as using a real bed pan.
@Declopse Ай бұрын
What is your opinion compared to the Bambu Lab a1 vs the Creality Ender 3 V3 Plus?
@NathanBuildsRobots Ай бұрын
The Bambu A-what? Never heard of it...
@NathanBuildsRobots Ай бұрын
But serious answer - A1 is tuned better out of the box, and a bit quieter, but 1 size class smaller, and has AMS lite option if you wanted to do multicolor. K1 is bigger (the bump from 256 to 300 is more significant than it sounds) and probably has higher max flow rate, (though I didn't test that in this video)
@3DATHENS-qi1tu Ай бұрын
@@NathanBuildsRobots
@stephanbrenner3317 Ай бұрын
does anyone know if a even larger version of the Ender 3 V3 is planned by creality? I mean something like 420mm x 420mm which what seems to be a common print bed size as other manufacturers show?
@NathanBuildsRobots Ай бұрын
They have the CR-M4 which is 450x450. I made some great prints with it before giving it to someone. I doubt they'd make an Ender product like that, but maybe I'm wrong.
@stephanbrenner3317 Ай бұрын
@@NathanBuildsRobots yes I know this Printer. But it is quite expensive in comparison. Thanks for the reply.
@petercallison5765 Ай бұрын
I sell 3D printers and the Max models(Kobra 2 Max, Neptune 4 Max) are more popular than mid-size. So unless they update the Cr6 Max then really need to upsize this.
@user-rr1sb8dh2g Ай бұрын
How wide is it with the filament on
@user-rr1sb8dh2g Ай бұрын
Ordered one but not wanting to relocate the spool so hoping it’ll fit in my space please let me know thanx
@matejrifelj1299 Ай бұрын
Any reason why I'd buy it instead of SV08?
@NathanBuildsRobots Ай бұрын
TBH That is a really tough call. The Sv08 is a stellar deal right now, and is bigger. I will say, the Ender 3 V3 Plus has a much better user interface when its not tethered to a computer. Setting up Wi-Fi, browsing print jobs, loading up prints from a flash drive, etc. is all easier in this machine. Plus this looks better than the milk crate. But purely in a spec-war, and a modders perspective, I’d probably pick the SV-08
@matejrifelj1299 Ай бұрын
@@NathanBuildsRobots I appreciate your honesty. Thanks :)
@worthmor5146 Ай бұрын
"#CrealityK2Plus"
@haroldyoung2254 Ай бұрын
would love to try out creality prints 5 but no support for cr-10 smart pro or my little ender 3 v2
@3DandTeePrinting Ай бұрын
Creality has said over next 2 to 3 weeks they will have their older line up in 5.0.4 release (current version is 5.0.3)
@AndrewAHayes Ай бұрын
Have Creality claimed to have written this new version of Creality print from scratch like they claimed they wrote the first version, but was yet another fork of Cura? The Benchy gets its name from being a benchmark of QUALITY print. I don't see the point of the speed Benchy as you can't really determine the quality. Surely people should be trying to print the perfect Benchy as fast as possible
@NathanBuildsRobots Ай бұрын
I would tend to agree but companies like marketing by numbers. And I blame 24/7 printing for this 🤪
@martinskamla6789 Ай бұрын
You ruined the print quality by moving a 1kg spool on top This massively increases vibrations of the frame
@NathanBuildsRobots Ай бұрын
It’s not as big of a deal, print quality was good
@einsteind Ай бұрын
My only comment is that it's a bit ratterly, compared to the k1c
@DeviantFrogman Ай бұрын
I have this printer and my god it is LOUD. The squeaking at slow speeds is headache inducing.
@nathankean7968 Ай бұрын
It may just be on my end but your share sale link didn’t work
@NathanBuildsRobots Ай бұрын
Yep, the whole site is broken right now. Yet another reason why aff links are the worst form of monetization.
@NathanBuildsRobots Ай бұрын
Just went back up! 🪤
@nunovicente34 Ай бұрын
Doing a review of a new printer and you already had to make mods to it, hmm
@NathanBuildsRobots Ай бұрын
Yeah, it’s probably fine in the stock setup but I like it a lot more this way.
@TNX255 Ай бұрын
You must be new here.
@nunovicente34 Ай бұрын
@@TNX255 im not 😅 but it would make sense to test it how he received no?
@TNX255 Ай бұрын
@@nunovicente34 On any other channel, yeah, but this is NBR, where things are done the NBR way!
@JohanFasth Ай бұрын
4kg trashcan. Or $100 trashcan. But cool.
@NathanBuildsRobots Ай бұрын
You’re overpaying for filament
@JohanFasth Ай бұрын
@@NathanBuildsRobots Well, I just took a number in the air more or less.
@Seaofjitsu Ай бұрын
First comment is the best comment 🎉
@joehimes9898 Ай бұрын
No comment
@lifegettingintheway2710 11 күн бұрын
Too much drama. If you get bopped on the head it is not the machine's fault.
@worthmor5146 Ай бұрын
"#CrealityK2Plus"
Aurora Tech
Рет қаралды 19 М.
Scary Teacher 3D Gaming
Рет қаралды 40 МЛН
Major Hardware
Рет қаралды 30 М.
JOON Italian
Рет қаралды 2,4 МЛН