Cordless Drill Chuck Removal

No video

Cordless Drill Chuck Removal

Рет қаралды 466,100

Күн бұрын

Amazon links:
RÖHM Extra RV80 Keyless Chuck RV 80 1.5-13 mm Socket 1/2 Inch Metal www.amazon.com...
CHUCK JACOBS 400 SERIESNON CARB www.amazon.com...
Keyless Drill Chuck Extra50-RV13 Röhm 1322450, for Milwaukee, 1/16"-1/2 Clamping Capacity, 9/16"-18 Mount www.amazon.com...
1/2"-20 Rohm Keyless Chuck: www.amazon.com...
3/8"-24 Rohm Keyless Chuck: www.amazon.com...

Пікірлер: 356

@cjjuddaustralianartist 10 күн бұрын

Hey thanks, you saved me from having to buy a new drill. I was on the verge of throwing mine out, as I've never been able to remove a chuck before. The allan key trick did it. Also as a bonus, once the chuck came out, I was able to fix the three grippers that had partially jammed for some reason. Luckly, they jammed wide enough to take the allan key. Back to normal now, no money spent. Many thanks mister. Much appreciated.

@AroundTheHome1 9 күн бұрын

You are welcome!

@SirFeatherfoot Жыл бұрын

This video may be 5 years old. But it's still useful to me today. Thanks for the no fluff content. It's much appreciated.

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@markfrenzel4718 9 ай бұрын

Fantastic! My dad and I were scratching our heads for a minute until he said “just KZfaq it”. And here I am. Took us 2 minutes after that. Thanks for the video!

@AroundTheHome1 9 ай бұрын

Glad you enjoyed it!

@bjhonusa Ай бұрын

Very simple and efficient. I am watching you tube due to creaters like you. ❤❤❤❤❤❤

@AroundTheHome1 Ай бұрын

Thank you so much 😀

@shawn576 4 жыл бұрын

Thanks for sharing. One tip is that you can use an impact driver to tighten or loosen the screw inside the drill chuck. This way you won't risk anything grabbing, smacking you in the face, etc. Drills are probably in the top 3 causes of testicle-related injuries.

@AroundTheHome1 4 жыл бұрын

Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org/

@bigoljohn3313 2 жыл бұрын

Exactly what I was thinking :)

@wrblue08 2 жыл бұрын

Yesterday I was trying to twist off the screw with a screwdriver till my skin almost came off. Then I mounted a flat head bit to my mid torque impact wrench and it loosened with just a flinch of the trigger.

@cyeelai1852 2 жыл бұрын

Curious, What are the other top 2?

@jimbo3267 3 ай бұрын

Your very detail video saved my Harbor Freight Hercules 1/2" 20V Model HC92K1 drill which sold for $120. It was advertised as "comparable" to the Dewalt drill and a compatable chuck sells for $16 on Amazon that one reviewer indicated it fit Hercules. My drill's chuck would open to full width but would not tighten enough to hold any drill less that 1/4". The screw in the chuck was a Toric 15 and it turns out that it was very loose. I tighten the screw (left threads) and now it works just fine and no new chuck needed.

@AroundTheHome1 3 ай бұрын

Glad to help

@danielshelton9724 3 ай бұрын

Thank you! I just did this after watching your video and swapped out my Chuck with a older drill that had burned out and it worked great now. Thank you for the content!

@AroundTheHome1 3 ай бұрын

Glad it helped

@Dm-dk9zp 2 жыл бұрын

I was going to buy a new drill but thought I’d check out KZfaq, that’s what was wrong with my drill!!! You just saved me $200.00 dollars!!

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@stephensmyth6363 Жыл бұрын

Second time changing a chuck on a makita drill . First time was for a friend , the chuck was completely broken. Teeth were broken so couldn’t use an Allen key . Cut outside chuck casing with a grinder and locked a 24” pipe wrench on chuck to lock it and used a steel site box for mechanical leverage to spin the chuck off . Tried your method today and had no luck . But decided to just use the vice grips as leverage with the Allen key and it came off . Good video ,thanks !

@rickanthony8259 2 жыл бұрын

Always thinking I can do things with no assistance! This video shows lots of ways to assist a stubborn chuck! Don't tell my kids I didn't know how! Now I do!!!

@AroundTheHome1 2 жыл бұрын

Don't worry, I won't tell. So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@beerless2950 3 ай бұрын

If I would have found this video long before, oh boy! Thanks! Saved my life!

@AroundTheHome1 3 ай бұрын

Glad to help.

@5850Corazon 3 жыл бұрын

Thank you, outstanding presentation! I hadn't considered using the strength of the drill itself to do the work. Thanks again.

@AroundTheHome1 3 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@claudegoldstein2788 3 жыл бұрын

Nice video helped me out! Ready to replace the crap chuck that came w my Hitachi cordless

@testgames4028 Жыл бұрын

Thanks a lot man, you're brilliant. Very helpful video, it's how smart you work with things, not how much force you use or waste efforts and time. No damage or scratches or anything to the drill. Clean Work 👍.

@AroundTheHome1 Жыл бұрын

Thank you very much!

@ladeda7033 4 жыл бұрын

Nice, thanks for the helpful video. Saved me some headaches . Just a little help there.... When you show something to the camera try holding it very still so our eyes can adjust, second hold it in place twice as long as you think nesessary. It gives US time to look, focus, and study without getting agitated about missing the picture. David west fire videos has this technique mastered. 👍 Again thanks for you taking the time to make educational videos ! Much appriciated!

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@crazykittenvideos855 2 жыл бұрын

Thanks man! Just took a decent Chuck off a cheap drill where the battery was dying. Hoping that the thread will match an old corded drill I have with a key. Keyless is just a whole lot nicer for low torque jobs like the softwoods I tend to use. Thanks again

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@PDjargon 3 ай бұрын

Thank you for this video as I could not for the life of me find a drill that had a chuck to accept anything above 10mm but plenty of chuck replacements that could. I thought it would be possible to switch it out but man the drill chuck did not want to let go of the drill..makes me think that they really don't want you do switch them out yourself since it moved my arm at a few points. But again your video made me keep on going and I've gotten it off just need to get the replacement chuck on now.

@AroundTheHome1 3 ай бұрын

Glad to help

@martiniindustries 5 жыл бұрын

Thanks for the video. I ended up using a breaker bar and the largest 1/2" drive hex bit that I could fit into the chuck, which ended up being a 7/16" hex for my 1/2" drive drill. I pinned the breaker bar and the drill against the ground and bumped the trigger to break the chuck loose.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@TheWinger1008 4 жыл бұрын

Nice! You just saved me a bunch of time. Thanks for taking the time to make this video.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@thewildbunch2782 Жыл бұрын

thank you, this is the best and straight to the point video I have watched yet.

@AroundTheHome1 Жыл бұрын

You are very welcome.

@ashleycowen5104 5 жыл бұрын

Your method worked beautifully on a Makita drill! This method worked when all other methods didn't. Thank you for your tutorial!

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@andyZ3500s 5 жыл бұрын

Most drills are the same style, I only came across one that was different in probably 30 years. 1/4, 3/8, 1/2 and 5/8 each have there own threads thought.

@vladster264 Ай бұрын

Thank-you! 🙂This is what I need, to loosen my chuck-and unfortunately maybe even replace it. I do agree, that does suck! For Milwakee to replace the chuck size.

@AroundTheHome1 Ай бұрын

Glad to help.

@baka120y4 3 жыл бұрын

Awesome! Just what I was looking for. I replaced the chuck in my Ozito in 10 mins after watching your vid. Thanks!!

@AroundTheHome1 3 жыл бұрын

Glad it helped! Thank you! 😊 And thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@mikesmusicden Жыл бұрын

Great video; thank you for taking the time to make it!

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@timc1341 11 ай бұрын

Brilliant Just used this trick to remove stubborn chuck on ridgid drill that was not coming off with the normal allen key/hammer trick everyone else recommends. Just be careful about the allen key / vise grip combo whipping around. Just touch the trigger at first to give you a gauge of how strong the kickback is going to be then brace yourself accordingly!

@AroundTheHome1 11 ай бұрын

Excellent!

@GregEpkes 4 жыл бұрын

Awesome advice! Best solution I’ve seen. Worked with no effort.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@dillwiggle2 6 жыл бұрын

I had a Makita drill that would not come off by hitting it with a hammer and allen key like the other videos showed. This one actually works ! Just make sure drill is in the lowest speed (1) for most breaking power and it is in reverse. Also I put the other end of the allen key in a vise. And USE 2 HANDS ON THE DRILL. It can tear your wrist off if you don't hold it very secure and with both hands. Another method that looks like it would work is using an air powered air gun with a hex bit in the drill and the drill in a vise.

@AroundTheHome1 6 жыл бұрын

Thanks for watching, and I am glad to help. Don't forget to stop by our website www.greatwhiteninja.com

@mohankrishnasamy1456 2 жыл бұрын

Thank you for your patience

@AroundTheHome1 2 жыл бұрын

No worries!

@kuntakoolkinte4242 5 жыл бұрын

Nicely explained. Your Calm relaxed attitude helps too. Thanks

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@garyr7027 Жыл бұрын

Oh yeah, this is the way to do it, the chuck on my drill came right off. After trying the, hit the Allen key with a hammer trick multiple times, but not too hard, the chuck still refused to come off. Did it like this and she spun off with ease. Thank you sir for this advice... it does indeed work. Only thing I did different was I use a number 3 Phillips to remove the screw, it holds better than a flat... just sayin.

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@Chokani 6 ай бұрын

I learnt something within two minutes!!!!

@christopherbrown5338 4 жыл бұрын

Thank you! I'm making a 1/2 impact to drill chuck adapter using the chuck you recommended. I just didn't want to mess with the 1/4 hex drive version, my setup will be much stronger & versatile.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@christopherbrown5338 4 жыл бұрын

@@AroundTheHome1 I had to use a T20 torx on my Dewalt and vise grips (sucker was on there!) but I just removed it and I'll put the new chuck on the drill & make the adapter from the old chuck.

@AroundTheHome1 4 жыл бұрын

Sounds great.

@samdang5246 Жыл бұрын

Thanks for taking the time to make this video.

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@marlagoode7099 8 ай бұрын

Your Cool......Explain well for a Lady with no Man to Help at Home ......Thanks. .....😉

@AroundTheHome1 8 ай бұрын

Happy to help!

@rgbungee1420 2 жыл бұрын

Wow thanks, my dad was so happy when he came back home from work and seeing his drill is chuckless lol he's been struggling for days to remove it until i watch this video and followed the step the hardest part was putting the screwdriver in because one of the chuck's teeth is broken and protruding making it hard and almost broke my wrist lol

@AroundTheHome1 2 жыл бұрын

Yeah, sometimes those drills have a ton of torque. Sounds like you did a great job.

@rgbungee1420 2 жыл бұрын

@@AroundTheHome1 yep he was proud of me and saved him to going to a repair shop and paying a hefty price but the downside is i got 4 blisters because of it lol but its worth it

@paulkremastiotis6296 7 ай бұрын

Thank you so much 🙏

@AroundTheHome1 7 ай бұрын

You're welcome 😊

@burtwillis1418 3 жыл бұрын

Great idea, thanks. I used a bench vice and that work perfectly

@AroundTheHome1 3 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@Jericho_bella 4 жыл бұрын

Now this is a truly good KZfaq how to video nicely done bud and thank you 🙏

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@KRSBU 5 жыл бұрын

Thanks for the video which is very helpful. My only comment is, circa 3’ 10” in, I would not suggest placing any tool under torque anywhere near the groin area, as it could lead to painful consequences, or worse, injury. Better to put the mole grips in a vice.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@victoryfirst2878 2 жыл бұрын

I have a 1/2 inch magnum drill motor 5.5 amps that uses a keyless chuck. That uses the best keyless chuck. They should of used that chuck in there heavy duty cordless drill. They are just making things a lot cheaper these days. But the price is does not go down.

@AroundTheHome1 2 жыл бұрын

You are right. Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@victoryfirst2878 2 жыл бұрын

@@AroundTheHome1 Thanks for the confirmation and will watch more of your videos Sir.

@victoryfirst2878 2 жыл бұрын

@@AroundTheHome1 Can you tell me if my Porter Cable drill motor 18 volts can get a replacement drill chuck that is of high quality ?? My chuck does not hold drill bits firmly. Can I purchase a high quality one from say Jacobs ??? Thanks

@andrewmarsh4920 Ай бұрын

I busted my middle finger after taking the screw out and attempt to use the vice-grip and the biggest hex key (6mm) that I could find my hands on. The vice grip slipped and by the time I had noticed the hex key had already struck my finger. Tip 1. after taking out the screw use wd-40 and wait 15mins for it to soak into the chuck's rod and it will come apart easily. 3 weeks until my finger heals. It's just a scratch still but I wanted to avoid it altogether. Use a decent pair of gloves too.

@hasambition 5 жыл бұрын

Thanks for the video. Exactly what I needed.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@machonsote918 Жыл бұрын

I shouldn't have watched the video so close to the screen, now I'm coughing just like you.

@oilsmokejones3452 2 жыл бұрын

Smart all the way..thanks..I'm going to try replacing a 19.2V Craftsman chuck with one from a Ridgid parts drill..hope the thread matches..the Sears is a strong drill but never really gripped bits very well..

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@PowerScissor 4 жыл бұрын

Explaining that's just the way you learned to use a chuck. Oh, and also, I break them all the time and am on my 3rd one. LOL. J/K. Good video, needed the info.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@travism2369 4 жыл бұрын

Great video could not have done it without you one tip for the next person once removing the set screw and inserting Allen wrench place the drill one the side secure against hard surface set to low gear and slowly press the trigger safer then pressing against abdomen! I was prying and beating I almost destroyed my hammer drill. Thnx buddy keep up the good video!!😬

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@clerissonmesquita 3 жыл бұрын

Thank you so much for your invaluable information, highly appreciate it, keep it up the outstanding job, have a great day.

@AroundTheHome1 3 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@user-mr2bl7kw8h 5 ай бұрын

Great vid.

@AroundTheHome1 5 ай бұрын

Thanks for watching

@bigbeardog99 Жыл бұрын

Milwaukee doesn't suck! But you can still change the chuck on your newer M18s which use the 9/16"-18 chuck. At this time you will not find either of the ROHM 1/2"-20 or the 9/16"-18 on Amazon. But Suncoast Precision Tools has them. At least they have the 9/16"-20. I just received 1 and ordered another today.

@pauleohl 3 жыл бұрын

You are right that the chuck is the weak link. Thanks for the video.

@AroundTheHome1 3 жыл бұрын

Glad it helped! Thank you! 😊 And thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@dakSRT 2 жыл бұрын

Good video. I have 2 Milwaukee drills.. one for work and one for home that I wanted to swap chucks.. This is definitely not as easy as it looks. I could not get either chuck off. I got the screw out of one.. that's it.

@AroundTheHome1 2 жыл бұрын

Sometimes these things will fight you tooth and nail to get them off. If rust has started to build up inside the chuck, you are definitely in for a fight. Good luck man.

@arontesfay2520 2 жыл бұрын

Thanks! This worked for my Craftsman drill

@AroundTheHome1 2 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@parwezalam2497 7 ай бұрын

Thanks very useful video

@AroundTheHome1 7 ай бұрын

Glad it was helpful!

@innernetfunhouse1161 3 жыл бұрын

Thank you. Super clear video. I agree the hammer and vice stuff is really unnessisary.

@AroundTheHome1 3 жыл бұрын

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@michaelcruz1434 Жыл бұрын

Excellent video, got me out of a bind. Thanks!

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@chewy2243 2 жыл бұрын

Wow Your Video Helped Me Remove The Chuck 100% Spot On👍

@AroundTheHome1 2 жыл бұрын

Great to hear!

@publicaccount7246 Жыл бұрын

Wow a new screw that holds the chunk, no wonder it comes out so easy. Try one that's been on for a while or the teeth are stuck in the middle and can't get anything in!

@jacklcma Жыл бұрын

Needed to clamp and hit with my mallet for my Rigid drill. Good video and links.

@AroundTheHome1 Жыл бұрын

Right on. 👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@stephanelacroix9426 3 жыл бұрын

nice idea, good job, but think to protec your boddy parts by gloves, boggles, leather apron before remove the jaw chuck or any else works!

@dazzalaff1967 3 жыл бұрын

Hahahahaha safety officer, pull your head in..back yard job..

@Nomadcreations 2 жыл бұрын

You make It look simple. My Menards cordless Chuck is So shot a Hex Screwdriver Bit Holder spins in It, so Experimentation City is The Game

@AroundTheHome1 2 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@Nomadcreations 2 жыл бұрын

@@AroundTheHome1 Thanx I tried getting My "So-Called" usable chuck loose & it turned out to be so stripped cogs I couldnt even get it off...

@shaun2049 5 жыл бұрын

Thanks mate my chuck just went on my m12 drill video was great going to buy new drill now l can buy just the chuck

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@snoopytheace4487 4 жыл бұрын

My m12 fuel hammer drill the chuck has gone bad twice. I'm taking it back to be fixed again. And my other Milwaukee drill clutch has gone bad.

@pietypereira8239 2 жыл бұрын

Thank you so much for sharing your idea.

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@Bamamike223 2 жыл бұрын

Thank you man! I was struggling with this thing. I appreciate it.

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@xxvodanhxx Жыл бұрын

So, this did remind me that the hammer action can break itself loose however. Most people are not as strong as this guy, and for some reason if your drill is still pushing full torque at the low setting, you can get hurt. I tried to hold the Allen wrench with my foot and it still slipped and hit my shin pretty hard, lucky it didn't crack my bone. I immediately remembered I had a metal pipe and steped on the drill with the pipe on the Allen wrench and it immediately came off. Nothing I did before that worked and I don't have a vise. Now trying to steal a chuck from a rigid drill for it but it just slips wont come off.

@AroundTheHome1 Жыл бұрын

Putting the Allen wrench in a pipe is a good idea to give you more leverage. Using a 1/2 or 3/8 galvanized pipe would probably do great. Many of these drills do have a lot of torque so it can get dangerous.

@godfearingheathen 5 жыл бұрын

Great video, thanks. Anyone watching this for instructions is surely not as experienced as you are. These are your target viewers. Best to have the allen key in the vise, short bursts of power with two hands on drill, one elbow down side depending whether removing/replacing to catch the kickback. No nasty injuries. You mentioned that the chuck is the weakest link but as the chuck is easily replaced sometimes it's better for it to break before the drill does. Thoughts?

@JoseGonzalez-uh7hw Жыл бұрын

. ..k. . . . .? . . . .

@JoseGonzalez-uh7hw Жыл бұрын

@rrohret21 8 ай бұрын

It may also work with a Robertson driver/bit.

@maxwang2537 3 жыл бұрын

This is impressive and very helpful. Thanks mate.

@AroundTheHome1 3 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@torodaman 3 жыл бұрын

But my chuck won't get tight on nothing that's why I need to replace it, so im gonna have to try the hammer method? Update: Got my Milwaukee one key hammer drill fixed by Milwaukee it was still under warranty, They actually replaced more than the chuck, is like a new $200dls drill now, I'm glad I decide it to take it to the Milwaukee shop.

@jamesmiddleton5304 3 жыл бұрын

Yeah that's my problem as well ..

@andyZ3500s 5 жыл бұрын

Rohm makes excellent products. $ 44.90 might seem expensive but when your cordless goes out you can take the chuck off and put it on your replacement drill. If Milwaukee is using a odd thread so you have to buy there replacement chucks that is just going to turn me away from them. I have Milwaukee tools that I bought new 30 years ago and some my dad and grandfather bought that still work fine. But when companies start doing things like that I'll spend my money somewhere else.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@MarkMcCluney Жыл бұрын

Extremely helpful, thanks mate.

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@marlonmoldez5739 2 жыл бұрын

Thanks

@AroundTheHome1 2 жыл бұрын

Thank you. I just checked my link in the description and it was no longer good. Here are the updated links. 1/2"-20 Rohm Keyless Chuck: www.amazon.com/Rohm-893350-Extra-RV10-Through-Hole-Diameter/dp/B00DD7KGHY?crid=1UBSKNXQBLIZL&keywords=rohm+1%2F2-20+drill+chuck&qid=1656509535&sprefix=rohm+1%2F2%2Caps%2C102&sr=8-4&linkCode=ll1&tag=greatwhitenin-20&linkId=90c9f41675485fb455a264ec7b2cbecf&language=en_US&ref_=as_li_ss_tl 3/8"-24 Rohm Keyless Chuck: www.amazon.com/Rohm-893351-Extra-RV10-Through-Hole-Diameter/dp/B00DD7KPPC?pd_rd_w=oQZOH&content-id=amzn1.sym.c32bd24a-4ef0-4e42-bb31-8027e5f6a185&pf_rd_p=c32bd24a-4ef0-4e42-bb31-8027e5f6a185&pf_rd_r=T3J9BEZMRK71CC9MRFRK&pd_rd_wg=TNPdm&pd_rd_r=7afef2da-06bc-4e9b-9a45-23e87828fdb2&pd_rd_i=B00DD7KPPC&psc=1&linkCode=ll1&tag=greatwhitenin-20&linkId=b07919f067e98bf41c4b1d1b571bba9f&language=en_US&ref_=as_li_ss_tl Now, my drill uses the 1/2"-20 but there is also a link for the 3/8"-24

@richardh154 3 жыл бұрын

I had two drills where i needed to remove the chucks. I couldn't get the screw out this way, so i drilled a 4.2mm hole in the top of the screw and started to cut a thread in the hole with an m5 tap and that worked for me. then it was easy to take the chuck off.

@stephensmyth6363 Жыл бұрын

Wow , sounds like too much work

@rhettharrelliii9082 4 жыл бұрын

This is the 4th video I watched and I wish it was the first, I will subscribe after watching this! Thx!

@AroundTheHome1 4 жыл бұрын

Glad to help. Thank you for watching, and please share. Check out hundreds more of our videos at www.aroundthehome.org/

@skinnladen 11 ай бұрын

Well, most people looking to remove that screw aren't gonna have such an easy job 😅

@AroundTheHome1 11 ай бұрын

Maybe not

@bobengelman1937 Жыл бұрын

Well done !

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@glennjames1756 5 жыл бұрын

EXCELLENT Video. Thank You sir

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@Ilovetosingem Жыл бұрын

Nice one. Thanks a lot for the info. Keep safe you and yours.

@AroundTheHome1 Жыл бұрын

Thanks, you too!

@hamaunahmadi5721 2 жыл бұрын

Nice thank for this video it helped me a lot that’s a nice video work perfectly fine

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@charlesscottkelly 11 ай бұрын

Cheers I have a hitachi that is hopeless since new

@jbroofingsystemsllc.6046 5 жыл бұрын

Nice Video, I ordered a new chuck an had the old one off within 30minutes of watching the video

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@lalrosangakhawlhring7894 2 жыл бұрын

thanks for video … 👍

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@guyde-vires522 3 жыл бұрын

Thank you for your great video

@AroundTheHome1 3 жыл бұрын

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@mrtuba9 3 жыл бұрын

Thanks dude! I’ll try tomorrow 👍🏼

@AroundTheHome1 3 жыл бұрын

Good luck. Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@The52brandon 4 жыл бұрын

My chuck was on super tight that I needed to use a ratchet and adapter. And the screw required a T40 torx key. And then to add insult to injury, the screw that came with the Rohm chuck I chose is like 70% the diameter of the Milwaukee. I haven't gotten it completely off yet, so I can't comment on whether the post is different too. But it'll REALLY piss me off if it is. At which point I'll tear the drill down far enough to take it off and try to fix all that with my lathe

@AroundTheHome1 4 жыл бұрын

Is your Milwaukee drill a Fuel model? They use a different size chuck and different mounting screw.

@lukebenbow4204 4 жыл бұрын

I got the same milwaulkee drill , brand new and the chuck is grinding my drill bit down like its a friggin lathe. My hexagon shank on my arbour has now become round and a very small diameter from say 10 mm down to 4 mm. This chuck i have is killing me and my bits

@AroundTheHome1 4 жыл бұрын

I know, it is a disappointment to have such a crappy chuck on a Milwaukee. Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@olivergrein5764 4 жыл бұрын

I will try it tommorow. Thanks.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@andrewmac2729 4 жыл бұрын

Cool video! Top man easy to follow,Thanks .

@AroundTheHome1 4 жыл бұрын

Glad to help. Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@jjoseph1278 3 жыл бұрын

Just ordered from your link

@AroundTheHome1 3 жыл бұрын

Thank you so much. Totally appreciated. So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@melissawallace5409 5 жыл бұрын

Defiantly the preferred method.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@shegar2011 4 жыл бұрын

I can breath easy, I dropped one at work and I thought I was going to have to replace the whole drill cause the chuck had a dent (and where I work a dent is enough cause to charge you for a replacement) but with this I can just repair it should the need come because that dent does not seem to have a negative effect. Thank you!

@AroundTheHome1 4 жыл бұрын

Thank you for watching, and please share. Check out hundreds more of our videos at www.aroundthehome.org/

@MFauzanHD 5 жыл бұрын

Nice vid man!!!

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@timeanspace 5 жыл бұрын

Great, clear video!

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@MHumanoid 11 ай бұрын

Unfortunately this didn't work for me. Drill doesn't have enough power at 55 nm, and whacking with a hammer won't get it loose. I can use raw force with extra leverage on the allen key, but it just seems to turn the chuck somehow. It's at speed 1, drill mode and in reverse. Any ideas?

@JimMcLaren1950 5 жыл бұрын

Excellent detailed video, have to replace my chuck its worn out and is hard to tighten and loosen when installing drill bits.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@premnakarmi3260 3 жыл бұрын

Ok thanx Sir for detail information .

@AroundTheHome1 3 жыл бұрын

Glad it helped! Thank you! 😊 And thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@jomhartayaben93 2 жыл бұрын

Thanks, it works... 😍

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@dougdroen7519 8 ай бұрын

How would u break it loose if the screw inside the chuck is a revet instead of a screw....

@mimosveta 2 жыл бұрын

great advice. if you don't have a bit stuck inside

@AroundTheHome1 2 жыл бұрын

Yeah, that makes it a bit harder.

@simpliciocamirino2271 Жыл бұрын

thank you for that sharing sir,

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@bobclifton8021 3 жыл бұрын

By the way, that screw also is compatible with a square drive bit, probably T20.

@AroundTheHome1 3 жыл бұрын

Is it compatible with a square drive or a torx? You mention both.

@steveans 4 жыл бұрын

Brilliant! Subscribed

@AroundTheHome1 4 жыл бұрын

Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org