I did say in the video that if these solutions didn’t work. Make a macro forum in my discord server and I will help you personally. How am I supposed to ask for a video on KZfaq comments 😂

it either doesn’t make it all the way to cactus field or it starts doing the farming thing and just walks off it

My macro resets twice, walks over to the red cannon walks back to the hive and resets and loops that

Bro tysm i was literally wondering why I kept on resetting and jumping at the start of the macro ur a life saver frfr🔥🔥

for me it was the hive slots. Thanks great content and fast help deserves a sub

With the macro when i choose to use the red cannon it walks past it and walks into a wall then resets and does it over and over

My macro keeps resetting once my bag is full and I can’t seem to fix it, I have it set to walk to hive once at 100% bag full and still keeps resetting

bro every time o start my macro it either resets or uses the red cannon lands somewhere island resets again

This video Helped me, but still I had to make sure of this check list: Even with this useful video I was still having issues. Three reasons: 2 and 3 on the checklist below--- AND, the third reason being: my lack of experience in this software :P. Check list if you`re having issues: 1- Performance stats turned off 2- Display Scale Size 100% 3- Keyboard Language should be on "ENG" 4- Movement Speed in Roblox Beeswarm, go to settings, scroll down, Type in exact number (example_: 33.8 don`t round it up to 34) Also turn on "movement compensate". 5- Double check your HIVE number, from right to left it is 1-6. Farthest to right is 1, and all the way to left 6. Set it correctly before starting. Want to add more ?

Thank you so much bro it just kept flicking the camera wrong and reseting me and it turns out my screen res was WAY off and i changed it to 1920 by 1080 which perfectly fixed it, tysm! You got a new sub and like

my problem is it just goes to the side and hugs the wall if theres no wall it just walks off the field

mine just changes camwea thig walks over to red cannon walks back and when i try to use it it resets

When I macro I drift off into another field after like a minute

When i use elol or other It runs closet and closet ti the wall and then it just runs into it

EVERYONE THERE IS A NEW 0.9.7 VERSION DOWNLOAD THIS AND TRY IT TO FIX YOUR PROBLEMS pls pin for all to see

Mom Rexta uploaded

My macro reset everytime like when its at hive it resets and when it is not at the hive it resets(and it is 1920X1080

When I set my “to hive by” to walk it just walks past my hive and then it resets

Bro i hate how when i have full pollen, it’s supposed to go convert it into honey, but it freaking resets and makes me lose all the pollen

my problem is that when ever i start it my marco cant click "e" so i just run past the red cannon and i have no clue why it dose that

DAMN BRO TY IT WAS THE SETTINGS U DESERVE A SUB AND LIKE

the macro works fine but it doesnt got coveret pollen to honey i checked the correct hive slot and everything. its just walks to the same corner and resets its self

anytime i enable planters or collect glue it just opened my inventory and scrolls like it’s trying to find something then resets, bucko bee and riley bee quests break the macro because the macro can’t click through the dialogue

DUDE THANK YOU SO MUCH I HAD SO MANY PROBLEMS BUT BC OF YOU ITS ALL FIXED TYSM

My macro just changes camera angle, then resets and does that over and over, i did the resolution and everything u did in this video but it wont work

My macro resets, walks over to red cannon and resets and loops that???? how to fix

Thank you my natro macro has been committing suicide non stop and I didn't know how to fix it

Guys make sure you don’t have a controller or something plugged in your computer that’s why your character moved to the cannon and resets and goes back that’s solved my issue ❤

I just started using natro macro and I'm farming in pine but it keeps on making me exit the field is there a way to fix it?

My macro keeps resetting and doesn’t move

whenever my bag becomes 95% full its supposed to go to the yellow cannon to my hive but it misses all the steps and gets stuck on a wall then just resets itself

Thank you so much bro you saved me . I kept trying to open it and it said there was smth wrong with my display settings and now its fixed 🔥🔥🔥🔥🔥🔥😊

HELPPPPPz MY MACRO JUST ZOOMS OUT AND JUMPS OVER THE RED CANNON UNTIL IT GOES TO A WALL AND RESETS I DID EVERYTHING U DID IN THIS VID IDK HOW TO FIX

OMG TYSM I DIDNT KNOW WHAT HIVE SLOT WAS UNTIL NOW TYSMMm

My macro doesn't detect the honey and keeps resetting the field, I put the messages on Discord and out of nowhere the print of the honey and pollen goes wrong, and there's nothing closing the screen on top, and the GUi error appears

for me I auto reset when i spawn in

a problem i’m having is the macro not waiting for my bees to wake up after resetting when doing a bug run, resulting in either me dying or the mob just not being killed

for me natro macro just goes to pine tree and walks to the field and just stands there doing nothing. just letting the bees do the work. and i also tried every pattern and its the same outcome. then it resets after the inputed time and just does it again. can somebody please help

Hi I am having a current issue with Natro macro where it will say "Unable to detect In-Game GUI offset!. Natro Macro will NOT work correctly!!!" I have tried everything it said to do but i have yet to find a fix. Wondering if you had a soultion to it!

For those who have the monitor problem natro macro relays on seeing your screen so when u turn your monitor off it stops being able to see

My macro works fine, until it comes to clicking E. Whenever it tries to use the Red Cannon it just doesnt click e and slowly walks away. Same for Converting, it doesnt click E and just resets. Any solutions?

Mine is randomly resetting all the time, what do i do?

Mines is drifting out onto another field

my display settings may or may not have broken my pc, Everything is in bad quality rn

OMGG TYSM MY MACRO IS WORKING SO WELL NOW U EARED A SUB

my macro just doesnt click on some fields im supposed to be making at least 1b a night but i only end up makin 200m because my bees are doing all the work and my macro wont click.

GUYS FOR PPL WHO NEED HELP WITH RED CANNON ERRO GO TO SETTING > CHARACTER > MOVEMENT

This helped so much thank you

The quest part of the macro is not working for me it says “unknown” under Riley bee quests and when I macro the quests, I end up going somewhere and resetting

TYSM YOU HELPED ME RESOLVE MY PROBLEM !!! (+ 1 sub )

When I turn my monitor off and let it run eventually it keeps saying “no bss found” and it keeps trying to reopen and close Roblox but the same thing happens every time

what if u dont have the canon unlocked yet bro

I realized its because I have some stupid mod that makes all letters in roblox be like minecraft, so it probably thinks its another language

My natro macro just stands still on the field

When the Marco goes to leave pineapple field it turns right to early and. Gets stuck

My problem is that it non stop resets until the macro leaves and joins a new server and shuts off

thank you this helps alot

TYSM now I make alot even when I'm ar tution!

I LOVEE YOUUU I HAVE BEEN TRYNA FIX FOR SOOOO LONG I QUIT AND I JUST FOUND THIS VIDEO ON YT TRIED AND WORKED OMGGG

youre the best bro +1 sub you helped me so much

Me realising that I’ve been calling the hive slot closest to the red cannon hive slot 6 be like:

idk if you remember me but i got the macro finally open but now it either says scirpt not found or it doesnt jump idk if its bc i have a 60 % keyboard im going to test to day whit a 100%

i have a problem my scale is at 150% but in the vid it needs to be 100% if i set it on 100% my screen is like very small like its zoomed out anyone else have this problem? someone has any advice?

Hi rexta! Just wanted to know if its safe and if it can damage my laptop, i've heard laptops can have problems with overheating

My bee bear messes up going to the hive so it misses the hive stands there and resets idk if haste also messes it up but it is rlly annoying how no one is talking about this

The only issue I have is that when I turn gather with shift lock on it doesn’t work. I have shift lock turned on in the actual bss settings so I’m so confused 😭

i have a problem where it will restart my game and make me choose a hive again

When I press start it closes Roblox and starts it again and says u don’t have permission

so everytime i start it, it goes straight to pepper then resets, then it just repeats that.

mine isnt really broken but it just walks off the field and just macros the ground

i have a problem where the macro runs for like 10 minutes then it just crashes.. but not my whole computer JUST the macro will close and i’ll dc after 20 mins of standing still.. idk how to fix it

really thanks bro you gived me help thanks 9999x THANKS ❤❤

For me it thinks its night when its not a lot of times

It keeps making me reset for no reason

where did typewriter go.

BRO MY MACRO WONT DOWNLOAD BECAUSE I CANT EXTRACT THE FILE

I set my macro to the pine tree field, but it farmed in the mushroom field. What did i do wrong?

My natro macro just walks over the red cannon, does anyone know how to fix this? I have the exact same settings as my friend and his works fine, but mine doesn’t..

My character is just walking on the fields and not collecting pollens, how do I fix this?

for some reason it makes me go to strawberry then resets then repeats the wealth clock

Bro i can’t walk back to the hive the character just walk and reset and don’t go back to the hive and won’t make honey

My issue is that I click f1 to start the macro and it resets my charecter but nothing happens after that. My roblox player just stands still at the hive. I dont know what to do

bruh. i always set my thign to walk after the pollen container fills up, but for some reason it just resets itself

Hello Blixen, does Natro Macro still work for you? I updated my Roblox and I think it is no longer compatible because when you want to enter a field 2 minutes after farming, your character restarts.

Hey! I have a problem, everytime my character resets it just enables snip and clip on my pc, how to i fix that?

Mine just keeps resetting me at my hive , won’t even give me the chance to move. I had the clock checked & half way there I just automatically reset midair

I just reset and walk into my hive

Every time I start the macro it goes to the field I want it to but not the style it moves

my macro just resets and stands still

mine just straight up resets me.

When i use natro macro its suppose to go to pine but lands on spider field or strawberry

I keep going in circles

My macro keeps going to blue flower field even when i change it

When I turn off my monitor my macro stops for some reason

My charcter goes to field i use stationary pattern but then tries to walk back to hive walks into wall and resets how to fix it?

Whenever I go to cannon, I get stuck. How do I fix that?

I'm trying to plant a pot, but the inventory won't open

I don't have any of the resolutions listed in the video 😢 only 1366 x 768 (recommended), 1360 x 768, 1280 x 768, 1280 x 720, 1280 x 600, 1024 x 768 and 800 x 600 which one do i choose?

Mine never farms where it’s told to I set it center for blue flower bc I had a 3x boost there shit started farming the ramp next to the 5 bee zone :/

Mine just teleports to. New server then just does nothing