Traxxas Ruster 4x4 : New RC Setup Tips and First Run 3S BASH!

Traxxas Ruster 4x4 : New RC Setup Tips and First Run 3S BASH! - Netcruzer RC

Рет қаралды 151,975

5 жыл бұрын

Rustler 4x4 new RC setup tips for beginner and advanced owner, then an epic first 3S BASH! Check gear mesh, check slipper clutch, check screws and nuts. Advanced: Traxxas 6893X install Aluminum Bearing Adapter amzn.to/2U68vLb. Add steering exponential and set steering endpoints with TQi Bluetooth amzn.to/2QvwFQi Traxxas Link App settings.
Netcruzer recommended items SHOP USA: www.amazon.com/shop/netcruzer
Follow Netcruzer on other Social Media Sites:
Facebook Page: / netcruzer01
RC Instagram: / netcruzer
TECH Instagram: / netcruzertech
CARS Instagram: / netcruzercars
Twitter: / netcruzer
Donate: www.paypal.me/Netcruzer
Cameras I use or recommend for making videos:
Compact Travel Zoom
Sony HX80 or HX99: USA amzn.to/2uHYaIn CANADA: amzn.to/2fGCGZw
Stabilized Action Cameras:
Sony AS300 Optical Stabilized 1080p Action Cam: USA amzn.to/2fEYQvv CANADA: amzn.to/2w7cdur
Sony X3000 Optical Stabilized 4K Action Cam: USA amzn.to/2w4BCGb CANADA: amzn.to/2hZG6rf
GoPro Hero 7 Black Hypersmooth Stabilized 4K 60 Action Cam: USA amzn.to/2xXkVuH CANADA: amzn.to/2xTYO8p
APS-C Sensor Cameras:
Sony A5100 Mirrorless Vlogging Camera: USA amzn.to/2w4BZQW CANADA: amzn.to/2fFyucL
Canon Rebel SL2 DSLR Camera: USA amzn.to/2zzv5TN CANADA: amzn.to/2U0BkZF
#Netcruzer #Traxxas #Rustler4x4 #newRC #rcsetup #firstrun #rctruck #rccar

Пікірлер: 165

@droth2011 4 жыл бұрын

Your video is awesome!! Thanks much for your time and effort. Guys like you make this hobby a lot of fun.

@ShenRC 5 жыл бұрын

😲Things wicked fast! A tip on gear mesh that I do is I pull the pinion all the way away from the spur gear until it's teeth are almost almost touching the spur gear then I spin the spur and find the out around spot that hits the pinion gear and mark it with a white dot on the spur or a with a marker and then set the gear mesh to this spot so it will be perfect with out no binding. you can also use a little piece of paper and put it in between the pinion and the spot marked on the spur and that should set a perfect mesh... lastly another tip use a dab of shoe goo goop glue go around the motor screws making sure its on the motor screw and on the motor plate and you will never have a motor slide out of position ever again. 😃

@noahgolden6727 3 жыл бұрын

Wow, thanks for probably the most informative beginner's video I have seen for my new truck.

@lucaperaita3992 5 жыл бұрын

Wow,this is a AMAZING GREAT AWESOME video thank you for posting this it’s awesome I’m getting it for Christmas 👍🙂😀

@MachSpeedHobbies 5 жыл бұрын

Great snow bashing!

@STEVOD313 5 жыл бұрын

multi tasking on friday night, lol thats awesome! Im sure ur gonna have some fun with this truck, good info in the video

@STEVOD313 5 жыл бұрын

the best way to put the body on for me is to put it vertical in front of u, like putting on a shoe, the body is ur foot n the truck it ur shoe, lol sounds weird but works, front of body is like ur toes lol try it im telling u

@STEVOD313 5 жыл бұрын

the shock springs seem to be a lil short, ive added a thicker spacer then stock to make up the slop from the springs being to short

@netcruzer 5 жыл бұрын

Yeah I don’t want to seem rude or distracting on stream so I turned my mic and cam off for awhile. I do a lot of RC maintenance on those calls, but also want to show what I’m doing. So I’m not all that engaged in the RC hangout sometimes and I apologize for that. Got good content though! Haha

@STEVOD313 5 жыл бұрын

Netcruzer RC TECH CARS oh it’s all good u know I don’t mind, do what u gotta do bro, I should be working on things myself while on rc talks.

@Sloppyjoe96 5 жыл бұрын

the metal spur gear bearing race is a very smart thing, i waited for mine to break and had to rebuild my rear diff when the plastic bearing race failed.. so its cheaper to just get it before it breaks

@RichD 5 жыл бұрын

Awesome video, glad you enjoyed the insanity of this tiny truck! It's rapidly becoming a family favorite here with how easy it is to drive and fun to jump. Wondering, did you break the stub axle yolk? Your setup section was informative, always impressed by your information and action. Thanks for sharing.

@aludunkber4855 2 жыл бұрын

thank you with the helpful information about adjusting the steering servos.

@leroy5202 5 жыл бұрын

Looks Awesome! Can't wait to get mine in 21 days!

@rogerchevelle7231 5 жыл бұрын

Great video.. love the rustler

@MrNiteriders1 5 жыл бұрын

Very nice work man. Looks really good👍👍

@JeffreyReiber 5 жыл бұрын

Great video! Eager to run mine in the spring time.

@redbanditracing Жыл бұрын

Nice video, love the Rustlers

@tiffinhappy9744 Жыл бұрын

This video helped a lot. Great job.

@chuckwalters4759 5 жыл бұрын

Great review! Thanks

@chancesrc4832 5 жыл бұрын

That thing is a beast!!!🦁

@tippedbacktj8492 4 жыл бұрын

How does this video only have 500 likes? It was VERY helpful to me and thank you for showing everything up close I liked and subbed

@JohnConnor12 5 жыл бұрын

Ordered one of these the other day, but haven't received it yet. This video helps me justify that I already ordered GTR shocks for it.

@GT-po6by 3 жыл бұрын

I subscribed because a saw you are in Canada, love to see Canadian content. Don’t ever loose it eh!

@cosmotect 5 жыл бұрын

Thank you for a raw video!

@AxiomaticPro 5 жыл бұрын

I enjoyed the set-up portion! Very good tips especially on the steering adjustments. I actually forgot to set my ESC to LiPO mode as well. Great bash too! From fence, to jump, to building, the Rustler held up well...considering. Shock cap seems to be an automatic upgrade. Bummer it made your out drive pop out.

@netcruzer 5 жыл бұрын

The card says it ships in NIMH mode but then when I checked my ESC it was already green, indicating lipo. Confusing! I checked it a bunch of times thinking I read the card wrong. Yeah it held up ok, especially for that wall hit. I just did find a crack in that axle out drive. It’s a new weak point, I shared it on my Facebook and Instagram. Check your axles. One side of each U joint is chewed up and weaker from assembly. 😩

@RichartAsia 5 жыл бұрын

Crazy car man....

@rcadventuresunlimited 5 жыл бұрын

This is a real bisher 👍👍

@User-mr8zw Жыл бұрын

All weaknesses found in less than 18 min. Quite impressive! 😁Lets see if Trexxas fixed it meanwhile. I will check for myself next week!

@longboardguy 5 жыл бұрын

Looks like a lot of fun on the snow will have to try mine this year. I just picked it up about a month ago it’s a blast but I need to gear up a bit the 11T on 3s seems to wind out fast

@EXTREMERC416 5 жыл бұрын

I used a little rope to prevent the bottom cap from flying off works like a charm

@youraveragecoop5633 5 жыл бұрын

Well beaten sir!

@gadgetmantwincities 5 жыл бұрын

We drilled a tiny hole in the spring perch and then zip tied the perch to the spring with tiny zip ties!

@netcruzer 5 жыл бұрын

Nice DIY retainer!

@vitodambra72 5 жыл бұрын

Wow i did the same lol i swear i was gonna post it to tell him to do so...good minds think alike haha

@vitodambra72 5 жыл бұрын

Also lens cap covers work nice as well with a drop of lock tight super glue gel

@tomv3361 3 жыл бұрын

Best tip ever...thx

@RCmanfinland 5 жыл бұрын

Nice👌

@sm1ty 7 күн бұрын

Here, 5 years later..and the slipper clutch bearing is aluminum on the Ultimate edition.. only took traxxas 4 years to make it stock and a new version. lol

@LandscapinAlex 5 жыл бұрын

To make the go pro mount stick with no problems (it will never come off again) get a new mount when you go to apply it heat up the tape side with a lighter then stick it on quick

@davesrcvideos8031 5 жыл бұрын

Great vid, wet and slippery, seemed to do well tho

@robbrcnstuff4220 5 жыл бұрын

thanks for the info, I have a question about the radio binding, would you be able to control 2 cars with 1 radio or have 2 radios control 1 car?

@mattio79 4 жыл бұрын

the easiest way to mesh traxxas 4x4s is to use a piece of printer paper between the pinion and spur, push the pinion against the spur, snug the slider screw up and pull out the paper and BAM! perfect mesh.

@phillip_ino 5 жыл бұрын

How do you film and drive at the same time? How do you mount your phone to your radio?

@morrisf3957 3 жыл бұрын

gotta be a good mechanic with these

@yvandesgagne4967 5 жыл бұрын

It is delicate the Traxxas Ruster 4x4. :o) Hard snow and plastic are easier to break with the impacts on frozen snow. Yvan :o)

@DeRock401 3 жыл бұрын

My rustler when it was stock on 3s it was popping wheelies like crazy. Maybe the lipos you were using were low c rating like 50c or something.

@tonybrito65 5 жыл бұрын

What would you recommend for a lipo for this truck? Id like to stay traxxas and not change my pinion gear. Keep making great videos!

@nighthawkj30A4 3 жыл бұрын

I have mine on Traxxas 2s lipo and i feel its more then enough. I might gear it to 15/54.

@gonzodetroitify 3 жыл бұрын

So on a spectrum do we want positive expo to have the steering input mimic as you like yours so as not to be dialing down steering end points if you follow Thanks for this either way 😎

@DoRC 5 жыл бұрын

Why did you replace the clutch bushing right away? Is that a known weak spot?

@ricksprings 5 жыл бұрын

I hope my 8yr old likes as his Birthday present surprise

@nicollerichter3701 4 жыл бұрын

He'll love it

@seanbrooks9578 Жыл бұрын

Hi I haven’t removed my rear end yet. I see how you say the metal bearing casing is a must as you install it. Now in this video, was that the $70 differential upgrade that you added that metal bearing casing to? I believe you said slipper clutch? If I go ahead and get the differential will that eliminate a metal bearing casing upgrade? Glad you showed those shocks also, I can’t get that damn body off of the front, or put it on w/o looking. I like the new concepts though, and tire tread.

@marcel5837 5 жыл бұрын

looks cool and cold ;P. I tried to fix the axles with frozen fingers once, very painful. I wonder how those wheels look on the slash.

@netcruzer 5 жыл бұрын

Yeah I didn’t attempt to try to fix the axle while there. I knew it would be difficult. It’s easy with the axle tool. Check out my ‘do you know what this Traxxas tool is for?” Video. 😉 I’ll try swapping some wheels around later on for my Slash.

@nighthawkj30A4 3 жыл бұрын

My receiver box is different then on my Traxxas Rustler 4x4 VXL. Wonder if its updated version. I purchased the rc today

@jeffrenman4146 Жыл бұрын

love your video… I want to ask you the consensus all across every channel is that the 3 cell system will definitely destroy your driveshafts… Are you planning on putting in metal ones? Also you can get 40 miles an hour by putting in that 17 tooth and then using a two cell battery Lipo is that not anything you would like if so why? The car is awesome by the way I'm sure we love it… By the way my car is ordered I'm just waiting I think I'm going to go crazy waiting for it

@netcruzer Жыл бұрын

I didn’t keep the rustler 4x4 as I have a Granite 4x4 which was too similar so I only kept it because I didn’t want to spend all the upgrade money on the Rustler. but if I did keep it there is a newish plastic option now for getting 3S reliability. The Extreme kit from traxxas uses the MAXX axles and should hold up to 3S bashing. I’ve not tested them though. Metal MIP X-Duty or Tekno metal axles would have been the upgrade to do in the past and is still a good option too. But they don’t recommend RPM arms with the metal driveshafts as the extra flex might bend them. The 17T pinion is going to produce a lot of heat on 2S or 3S and that’s why they say it’s for pavement speed runs only. Grass/dirt bashing is harder on the drivetrain. Enjoy your Rustler 4x4!

@3630FS 4 жыл бұрын

I have to agree for some reason it's hard to clip the front on my also??? Nothingike my maxx slips right on without looking!

@ericstephany7305 5 жыл бұрын

Cool looks very fun 👍🏻 great vid

@domoniquebales6379 4 жыл бұрын

Eric Stephany jn*xxxccgvyt6

@43rocket 4 жыл бұрын

whats the max lengh in mm for lipo pack you can use???

@NORTE_559 3 жыл бұрын

That's fucken sick

@benjaminhazelwood3277 3 жыл бұрын

run a 21-22 pinion gear scary but fun.

@sethmartin1929 5 жыл бұрын

You have to pull the sides of the body to get the body on good

@Wooskii1 5 жыл бұрын

When I got my rustler VXL I looked at the radio set up, and saw "steering sensitivity"🤔 then thought I really wish they also had expo LoL.

@todizzle666 4 жыл бұрын

The radio doesn't say that its steering trim just so you know unless you into Bluetooth and have the tqi link module

@Wooskii1 4 жыл бұрын

@@todizzle666 don't have the Bluetooth, but iirc steering sensitivity is just what Traxxas calls Expo. I don't think you need the module to adjust Expo or "sensitivity". I could be wrong, haven't messed with that particular TX/ receiver for a while.

@trevorwhalen8659 5 жыл бұрын

Stampede 4x4 I had to crank the slipper down, kept coming loose

@mikebrown1494 Жыл бұрын

Yeah, the front clip is a pain, but they're getting away from the stupid little clip pins we all hate...

@davin2388 5 жыл бұрын

Im having trouble taking out that grub screw on the slipper, if anybody has any suggestions i would highly appreciate it :)

@distinctlawns 5 жыл бұрын

Hello Great video I recently purchased as rustler 4by 4 What mods do you recommend

@Dot.774 3 жыл бұрын

If is the normal one then you can upgrade to make it VHL, the upgrades will cost you around $180 or less which comes with new gear , module, motor and new battery it will improve amazingly.

@rodneysutherland6743 2 жыл бұрын

After 2 years is the rusty still running?

@karlfritz47 4 жыл бұрын

Does anyone have set up tips for on road running? I have suspension lowered..and running 40wt. Associated oil. Have. Road rage on road tires currently on car..the issue is it dosent seem to " hook up" spins out easy..iam hopeing having it lowered will help ..maybe i could back off clutch ? I have it tight..any help would be appreciated

@Sloppyjoe96 5 жыл бұрын

i think my slash is on a 15 tooth? i don’t remember anymore lol

@RMJ1984 5 жыл бұрын

Love my Rustler. But i should never have watched the videos about E-Revo 2 and Xmass 8s. Now every time i look at my Rustler, it looks like a BABY RC :( it's so small lol. Can't have it all i guess!.

@MrRamman04 3 жыл бұрын

Holy shit man your hard on your toys

@gravediggerrc Жыл бұрын

HELLO NETCRUZER I REALLY LIKE THAT VIDEO HOW FAST WILL GO ON THE 11 TOOTH PINON GEAR ?? YOU MENTION THE SWEET SPOT ON THE TOOTH PINON GEAR WHICH TOOTH PINON GEAR THAT YOU PUT ON ????

@GreatLakesRC 5 жыл бұрын

Fantastic video, very informative 👌 Now I know why you use the TQI radio for everything, you turn up your expo! I do not have the Bluetooth app and I don't want to even attempt the manual programming 😂😂 You are going to like the 17t, it's a whole different animal 👍👌

@milesrc2343 5 жыл бұрын

I don't understand why he uses it. lol I can't stand the feel of a traxxas radio. I'm futaba all the way

@GreatLakesRC 5 жыл бұрын

@@milesrc2343 Agreed. I really enjoy my 3pv 👍

@YungPro_custom 2 жыл бұрын

Don’t feel bad, I have to look at the front also in order to hook it 😩

@damonspiller2145 3 жыл бұрын

Can you show any video from 2wd rustler??

@eyeout 3 жыл бұрын

14:00 I feel your pain. I need both hands to put that body on.

@Tomsl15 5 жыл бұрын

I have the same one on 3s but I have way to much water in the wheels and when I do self right it shakes hardly and it will probably blow a tire or brake a prop saft do you have anyways to get rid of the water

@johnabelljr1997 5 жыл бұрын

All of the articles and and videos I've seen say to put a few holes down the center of each tire. Then when you are running, the centrifugal force will expel the water.

@NORTE_559 3 жыл бұрын

Whats the top speed

@pepperdoc4085 4 жыл бұрын

What is the utility of this piece? Cool video by the way!

@jrock9195 3 жыл бұрын

Coming from non lipo brushed $50 rc cars....I was not ready for my rustler on 3s I was very suprised lmao

@minnesotanice369 2 жыл бұрын

don't forget fan for esc

@dedrecluse 4 жыл бұрын

I always seem to have issues stripping out the spur gear and ever since I replaced the first one it just isnt the same. Any tips? Video maybe?

@netcruzer 4 жыл бұрын

Likely your gear mesh is a bit too loose. It’s a difficult RC to see and set mesh properly.

@MrAfricaMan44 5 жыл бұрын

I'm not a fan of battery powered cars, but this looks awesome! Great video btw.

@dylanchadderton1 4 жыл бұрын

I usually shoe-goo the inside of my bodies, probably will do it for this one

@KuntryBoyCitySlick 5 жыл бұрын

The rear shocks sag BIG time on mine. Looks lowered in the rear. I’m running the big bore aluminum shocks. Guess I’m going to have to add more oil.

@RobertNES816 5 жыл бұрын

If the rear sags then you need either stiffer springs or add more spacers to adjust the ride height.

@3tch3r 5 жыл бұрын

Because progressive springs suck buy linear springs for it.

@MrJackandEmily 3 жыл бұрын

Laminating your car.. sick.

@Sticker-Happy 4 жыл бұрын

"Oooooo...." - 13:41

@nitrodragon8182 3 жыл бұрын

Hey nice video so I was wondering should I get a rustler 4x4 Vxl or the maxxx. I like to drive my rc through rough terrain. Also quick question is the rustler waterproof or like..

@netcruzer 3 жыл бұрын

The maxx is a lot stronger but also handles a lot worse as stock. That’s why maxx has widemaxx accessories. All are waterproof, that does not mean submersible. Rustler is a lot of fun if you don’t need the extra ground clearance and handles better out of the box.

@nitrodragon8182 3 жыл бұрын

Thank bro

@richardvaughn4686 3 жыл бұрын

What drive shafts you running

@netcruzer 3 жыл бұрын

Stock. I made a rant video about those axles. But I’ve just noticed the new HOSS has revised Grey axles (and the new color Rustler 4x4 does too) so Traxxas has recently changed the composite to hopefully make them stronger.

@dhsrcstory1921 4 жыл бұрын

👍👍👍👍

@nikhilbhatt9114 4 жыл бұрын

How is this car running now almost 2 years later ?Any issues ? Have you done anything else with it ? I’m looking at getting this car as my first hobby grade. I’ve had the wltoys 144001, so this will be a big upgrade for sure. Any other parts you recommend I buy when purchasing the car? New subscriber! Love your channel very informative!!!

@netcruzer 4 жыл бұрын

I sold it in first year. Axles are too weak for 3S upgrading it costs too much so I kept an Arrma Granite 3S instead as they drive similar.

@nikhilbhatt9114 4 жыл бұрын

Netcruzer RC TECH CARS oh. I was considering the granite but the stx2 radio and it’s lag along with the servo are down points to my decision. Do you still think the granite with its current transmitter and other points are worth buying ?

@joewhite8079 Жыл бұрын

I stripped my spur gear recently no hobby shop near by now I'm waiting to replace it bloody annoying.

@jordank8422 4 жыл бұрын

Cheap merch that's good

@jesse58406 5 жыл бұрын

Nice vid guy...can't understand why you trying to kill the machine on the first run...

@laughingowl7896 4 жыл бұрын

Note to self: Don't hit buildings.

@whalefilms8755 5 жыл бұрын

Is this VXL or just the 4x4?

@netcruzer 5 жыл бұрын

4x4 VXL 3S

@braydenyoung3193 4 жыл бұрын

The self right system didn't work bc it was on something and couldn't rock properly

@NesredepEvo 4 жыл бұрын

what is the benefit of replacing that bearing adapter?

@netcruzer 4 жыл бұрын

It’s won’t melt like the stock plastic one due to friction and heat. One the stock bushing goes it starts to wear away at the plastic motor mount. This saves all that from happening.

@NesredepEvo 4 жыл бұрын

@@netcruzer Thanks :) ruined my spur gear, gonna bye that adapter as well :)

@pistonforge 4 жыл бұрын

first run and shock/drive shaft broke before the battery ran out..not so hot..like my trash..i mean slash -.-

@jskaggs8188 4 жыл бұрын

I find the clip less body is very difficult to take on and off.

@netcruzer 4 жыл бұрын

I did too. Mostly getting it back on.

@jodyadams7897 2 жыл бұрын

is there a way i could get your email? i was considering purchasing this traxxas and want the most bang for my buck. but i dont want something to tear up the first day haha! just get a list if everything that could help ya know? and the battaries you use as well

@daleb1225 5 жыл бұрын

I am having issues with my Rustler, when I plug the battery in the ESC comes on without a press of the button. I have steering but the wheels will not turn, if you or anyone has any suggestions I would appreciate it.

@netcruzer 5 жыл бұрын

ESC should not come in by itself. Sounds defective or the power button is stuck.

@daleb1225 5 жыл бұрын

@@netcruzer Thank you I will check the power button and see if that fixes it.

@hansoloberger2682 5 жыл бұрын

Fix it? If it’s sticking try a q tip dipped in rubbing alchohol on the button. New though shouldn’t stick.

@daleb1225 5 жыл бұрын

@@hansoloberger2682 I haven't found a solution and the ESC is still stuck in the ON position. Thank you for your suggestion I will try this today and see if I can get it to work. I tried removing the ESC but could not find a way to open it and did not want to break it. It is out of the warranty period, 30 days but has only been through two or three 2S Lipo battery packs charged completely. I have many other Traxxas vehicles and this is the first one to give me this much trouble, its looking like I will need to buy a new ESC but it is winter here so I am waiting for Spring before buying a new one. Thanks again, I will let you know if it works.

@nikhilbhatt9114 4 жыл бұрын

What MAH 3s battery is this running on ?

@netcruzer 4 жыл бұрын

It’s usually 4000 to 5000 Mah batteries for decent runtime and punch.

@milesrc2343 5 жыл бұрын

Time for some powerstrokes maybe?

@netcruzer 5 жыл бұрын

Those are nice, but I already have enough stuff to upgrade these. Aluminum shock caps to start. Then I might move my track tuned GTRs from Slash to Rustler.

@milesrc2343 5 жыл бұрын

@@netcruzer RIP Slash. Rustlered to death

@netcruzer 5 жыл бұрын

Slash will be back and better than ever for bashing... hopefully. That's the plan, just distracted with other things first.

@davin2388 5 жыл бұрын

@@netcruzer what shocks do you suggest if im doing mainly off-road bashing/jumps

@caris2893 5 жыл бұрын

I just grab both sides of the body at the top center and slide it on!...it’s weird that yours won’t do that🤨

@netcruzer 5 жыл бұрын

It’s still always a struggle let me to get the front on or off.

@t2nate137 5 жыл бұрын

Are those a arms more flexible?

@netcruzer 5 жыл бұрын

Yeah seems so. I expected a broken arm from the wall hit. But they are all fine!

@KuntryBoyCitySlick 5 жыл бұрын

I broke one yesterday. I nailed a corner with one wheel at a good clip of speed and it cartwheels and barrel rolled a bit. It’ll still drive. It’s 75% broke lol gotta order new one.