New Arrma Outcast ExB roller Center Differential Modification I Feel Is A Must Do Part 2 Series

No video

New Arrma Outcast ExB roller Center Differential Modification I Feel Is A Must Do Part 2 Series

Рет қаралды 9,329

Күн бұрын

This is one modification I feel is a must on all arrma 8s platforms, tighten up the center Differential to get the best rotation in the air & standing backflip with a coke can size motor 800kv & 1100kv motors that have tons of torque but very little rpm ! Make sure to replace spur to the included optional one ,also pinion needs to be bigger than the spur gear ?? Yes bigger 40 tooth to 47 tooth pinion! Want to know more ?? Watch this video and part 3 the final assembly & running video also check out part 1 so your up to date here ! • New Arrma Outcast ExB ...

Пікірлер: 95

@robcanthandlestupidy9249 2 жыл бұрын

I got confident working on my kraton exb 8s watching you thank you

@rcpd3157 3 жыл бұрын

That body does look so good!😎

@cmalt-z7171 2 жыл бұрын

Like the diff advice. Leaving the two holes open is great idea. Always learn something here. Thanks for the info.

@monsterrc9168 Жыл бұрын

A fine tipped 90w soldering iron works best for concentrated heat and not having to worry about melting or cooking the bearings.

@cslrclorne721 3 жыл бұрын

Thanks, look forward to part 3 , stay safe👍👊🏻🙏

@earlmoorhead5555 3 жыл бұрын

Thanks 😊

@lukenukem1164 3 жыл бұрын

Thanks for all the info, I've never run anything with a big 800kv so appreciate the gearing advice.

@smolscale 2 жыл бұрын

Good info in this video thank you for taking the time to make it and share

@SpeedSyko 3 жыл бұрын

Mine was done had to pull it apart to shim the output shaft. it’s still off, I’ll do your diff tricks while it’s out.

@earlmoorhead5555 3 жыл бұрын

Make a big difference I promise 👍👍🔥🔥

@silly_d_williams2167 3 жыл бұрын

👌🏾

@SpeedSyko 3 жыл бұрын

@@earlmoorhead5555 Thanks Earl, I had it completely assembled and noticed the diff wasn’t right. Thanks for always getting back with me. Your a great help!

@SpeedSyko 3 жыл бұрын

@@earlmoorhead5555 I’m putting the plugs in now. Thanks Earl!!!!!

@earlmoorhead5555 3 жыл бұрын

@@SpeedSyko thanks buddy 🙏🙏

@John-cd7xo 2 жыл бұрын

Good to know

@rcguygarage 3 жыл бұрын

🤣🤪before you're disappointed🤣🤪CLASSIC

@earlmoorhead5555 3 жыл бұрын

🚀🚀😱🤣🤣

@SpeedSyko 3 жыл бұрын

What’s up guy! You can do this to your big rock! Lol how you been?

@rogueFactor 3 жыл бұрын

awww yeah. Java & Moorhead in the Morning. 😁

@earlmoorhead5555 3 жыл бұрын

🤣🤣

@BarstoneRC 3 жыл бұрын

Good stuff bud.

@earlmoorhead5555 3 жыл бұрын

Thanks 🙏

@John-cd7xo 2 жыл бұрын

Good to know thanks mate

@earlmoorhead5555 2 жыл бұрын

Thanks 🙏

@gamechangerrc4633 3 жыл бұрын

That. body is nice I wonder if they have just the body in stock for sale already painted 👊👊💯💯

@earlmoorhead5555 3 жыл бұрын

Idk 🔥🔥

@winstonoso5821 2 жыл бұрын

I also broke a head screw off my differential. How do I get the rest of the screw out? Need help please..

@earlmoorhead5555 2 жыл бұрын

Weld a nut to it 👍👍

@donniemarks94 Жыл бұрын

Love these wrenching videos 👏

@meanf1502 3 жыл бұрын

Earl where did you get the gold her driver's an I did the sa.e to mine with ear plugs an 20mill great content Earl glad your doing better man

@earlmoorhead5555 3 жыл бұрын

My local hobby shop 👍👍💯💯

@3SonsRC 3 жыл бұрын

Thanks for this Earl I like how you just quick popped them in without taking all the gears out. How many full plugs where you able to getbtlun there this way.....two? And Blue Loctite for the center correct?

@earlmoorhead5555 3 жыл бұрын

Two plugs and blue gel lock tight 💯💯

@drroomba5045 3 жыл бұрын

Better than Netflix Earl. What colour locktite on the 4 screws in diff ? Thanks 🙏

@moereefer 3 жыл бұрын

Why do u have too put the ear plugs in center diff?? Love u work and builds

@earlmoorhead5555 3 жыл бұрын

Keeps the power to the rear wheels when the front wheels are in the air 👍👍

@moereefer 3 жыл бұрын

@@earlmoorhead5555 thanks

@FORD150-5.4 Жыл бұрын

If I can't do this to my what gone happens what is the difference whit the ear plugs???🤔

@FORD150-5.4 Жыл бұрын

I need the part number for the from diferential shims?

@Jeff.55649 3 жыл бұрын

Good video!

@jamesgeorge609 3 жыл бұрын

EARL... I noticed you didn’t loctite the diff screws or did you just use the original factory loctite? Just a observation on my part,,,,,great truck,,,,,🇺🇸👈

@earlmoorhead5555 3 жыл бұрын

I did lock tight them I just didn’t add the footage due to how long the video was getting 👍👍👍but thanks for noticing 💪💪

@howardsadofsky7694 Жыл бұрын

Great job Earl: what do you think of using a spool/lock in the center vs earplugs? Thanks.

@earlmoorhead5555 Жыл бұрын

I don’t like it locked it will definitely break differentials

@andrewtexiera2858 2 жыл бұрын

You ever have any binding with the center diff mine has some nasty locking in it and I’ve torn it down can’t really figure it out

@earlmoorhead5555 2 жыл бұрын

Yes had a lot of issues with the ExB differential till I went to alum diff housing

@andrewtexiera2858 2 жыл бұрын

What company did you go with just looking to get rid of the problems

@earlmoorhead5555 2 жыл бұрын

@@andrewtexiera2858 Integy thecheapiest one I found

@andrewtexiera2858 2 жыл бұрын

Thanks so much also do you have to take the front of the truck off to get the center out got everything loose just not enough room too wiggle it out

@meirdeaph8159 3 жыл бұрын

Brillant!

@paulrakis 3 жыл бұрын

Wow that's like a real car with all those big parts. Do you have to take out the whole engine mount and everything just to get to the diff? You can't just slide it out like the 6S rigs? I know u can just slide the motor in and out easy. But the center diff wow alot of work looks like that's the only way to get her out.

@earlmoorhead5555 3 жыл бұрын

No the whole transmission need to be removed 🤷🏻‍♂️💯💯

@paulrakis 3 жыл бұрын

@@earlmoorhead5555 wow yeah I see that and the dam motor mount. Do you recommend blue thread lock Earl or red for when I open up the diff? Probably just gonna put throw 5 runs before I check everything out. That 20M looks glue lol I hope it's pure silicone. I use 200k for my EXB center and she went about 20 runs before I changed it. Yes all black of course but all gears inside were perfect.

@earlmoorhead5555 3 жыл бұрын

I use blue gel lock tight in mine 👍👍

@paulrakis 3 жыл бұрын

@@earlmoorhead5555 kool thanks Earl I will too. 👍👊

@earlmoorhead5555 3 жыл бұрын

Thanks 🙏

@blanchard899 2 жыл бұрын

I just bought the same truck and same electronics as you, but went with the 1100KV instead of the 800KV. What pinion and spur gear setup should I do Earl Moorhead?

@earlmoorhead5555 2 жыл бұрын

My outcast is set up that way as well use the optional spur and a 37 tooth pinion

@earlmoorhead5555 2 жыл бұрын

Or stock spur and a 32 tooth pinion 👍

@FORD150-5.4 Жыл бұрын

Sr.. do you know the part number for the from and rear diferential shims ? I can't find it anywhere

@earlmoorhead5555 Жыл бұрын

No clue but should be on Arrma website

@Naginc 3 жыл бұрын

Great video Earl...question...What benefit is it to switch the spur gear to the smaller one? I installed the 800kv castle xlx2 in my Kraton EXB 1/5, running 32t pinion, performance is a little slow. I'm thinking going 45t. For Father's day the wife got me EXB outcast, I have a Max 5 combo..all your help is appreciated. Thanks for the info!

@earlmoorhead5555 3 жыл бұрын

Can’t fit a 45tooth with stock spur as the motor pushes out the side not enough to adjustment 44 is the biggest but with 800 kv it does on 44t and stock spur I like more air control so I gear up even more the motor rpm is super low

@lonewolf6169 Жыл бұрын

i think my Kraton 8s exb sounds weird! i believe for put proline street manice tire i dont know, maybe y guess

@lonewolf6169 Жыл бұрын

my center dif!

@Kiemon98 2 жыл бұрын

What is this small silicon balls? Where did you buy this?

@earlmoorhead5555 2 жыл бұрын

Not sure whatcha looking at 👀

@Kiemon98 2 жыл бұрын

@@earlmoorhead5555 You took this in differential.

@FORD150-5.4 Жыл бұрын

Ear plugs why ?

@earlmoorhead5555 Жыл бұрын

Adds more power to all the wheel evenly so the rc is faster and the front tires won’t balloon and pop the tires 🛞

@Bluecuban71 3 жыл бұрын

Can i run the new spur gear and diffs on the old outcast 8s ? I'm thinking of upgrading my old one with some of the new outcast parts .

@earlmoorhead5555 3 жыл бұрын

Yes I do on my red outcast 8s with a 44tooth pinion on 800 kv 💯💯

@earlmoorhead5555 3 жыл бұрын

I do run a max 5 hobbywing esc in the red outcast 8s 💯

@Bluecuban71 3 жыл бұрын

Thanks ! I can't wait till I get my EXB ! I might try to film it , it will be my first ever build .

@earlmoorhead5555 3 жыл бұрын

@@Bluecuban71 very cool👍💪💪

@eliasstavridis395 2 жыл бұрын

Good morning, nice video!!! One question please? Rear differential (100.000 oil) Center (20milion) front (100.000 oil) it is OK and safety? Thanks (outcast 8s roller with Max 5 combo)

@earlmoorhead5555 2 жыл бұрын

Yes should do fine 👍👍

@eliasstavridis395 2 жыл бұрын

@@earlmoorhead5555 or 200.000 front 500.000 Center and 200.000 back? Actually I would like to do nice game and do not destroy slowly slowly the differential? Thanks

@earlmoorhead5555 2 жыл бұрын

I run earplugs in my center differential fir the 1/5th line and 100k front and rear

@eliasstavridis395 2 жыл бұрын

Earplugs in the Center ? What is it?

@earlmoorhead5555 2 жыл бұрын

I have several videos on it with the outcast 8s and KRATONS 8s showing what they are 👍👍Installation of it

@Moggmodels23 Жыл бұрын

Hi hello buddy I've just bought myself the arrma outcast exb roller 8s just like yours this week I know it's 2 yrs on this videos old now but need some advice please. I just opened the difference case like you have charged the stock spur 46t to 39t I'm going to run 23t for mow buddy. The other problems Im having is once I've put silicone ear plugs in 2 of then. Which is cool 😎. Then I pop it all back together. With the black rubber down forwards . Then I start to tight up the 5 screws on the back. Once I tight them. The pinion plus the spur won't move around for some reason. Not sure why this is happening any help will be brilliant 👍👏😀 Thank you 😊

@earlmoorhead5555 Жыл бұрын

Need to remove the motor and make sure the spur is installed correctly

@rcguygarage 3 жыл бұрын

Are you better off going after the side for the diff screws?

@meirdeaph8159 3 жыл бұрын

Do u have a snap on tool truck body?

@earlmoorhead5555 3 жыл бұрын

Yes 👍

@codnamerich 3 жыл бұрын

Are you planning to do any upgrades? M2c has the new dogbones, support Brace ends, etc?

@earlmoorhead5555 3 жыл бұрын

Not sure yet going to see how it holds up 💯💯

@rcguygarage 3 жыл бұрын

Can you reuse them plugs for your ears🤣🤪

@rogueFactor 3 жыл бұрын

Use ONE pair of the unused ones. They have saved me SOOOO MUCH, brother. i pop a set in my ears before Mom and daughter leave home to go shopping and wow do they work well! i can't hear a single request for a credit card or cash or venmo transfer on their way out the door. It's frackin' glorio.. oh wait. they work really well on diffs. that's my story and i'm stickin' to it.

@earlmoorhead5555 3 жыл бұрын

🤣🤣🤣

@earlmoorhead5555 3 жыл бұрын

Yes 😎🤣🤣