New Basic Tool Changing Mach3

Рет қаралды 26,105

4 жыл бұрын

New-Basic-Tool-Changing-Mach3
To access this data, Rename the File "Tool-Changing-Basic.zip.txt" to "Tool-Changing-Basic.zip".
Then move the Folder "Tool-Changing-Basic" to a place of your Choice.
CNC Wood Carving UK
/ 2522810051320354

Пікірлер: 37

@user-ol7do6vf9c Жыл бұрын

Thanks Alan. Now I will watch this video and recover my spindal problem

@alexportiiii6414 4 жыл бұрын

Thanks Alan. Now I will watch this 6 more times. Blunt force education.

@dargindarginec9561 3 жыл бұрын

excellently 👍🏻

@sandrolazzaretti4472 4 жыл бұрын

Onde se encontra arquivo Tool-Changing-Basic.zip.txt para test?

@alanrobbo6980 4 жыл бұрын

Welcome and Thank You all for Subscribing, I hope you like my channel.

@TonysRefinishingTV 4 жыл бұрын

are you using a probe to set the z height on the tool then?

@alanrobbo6980 4 жыл бұрын

Tony's Refinishing, I use a pice of Flat copper as the Touch plate, which is connected to one side of the Input, and the tool to to the other side of the Input, the Thickness of the Touchplate is set in its DRO.

@TonysRefinishingTV 4 жыл бұрын

AlanRobbo 69 thanks very much for the reply Alan been looking for a video like this for a while

@alanrobbo6980 4 жыл бұрын

Tony's Refinishing, If you think it helps you, then Please Spread the Word.

@hsabdi6968 3 жыл бұрын

Thanks alan...is this how to modified to auto tool change..waiting your next video?

4 жыл бұрын

Great content. Keep it up! Would you like to be KZfaq friends? :]

@Nodeagent 4 жыл бұрын

Thanks Alan! My spindle won't accurately align with previous cuts after a tool change, or even just after stopping. How can I configure it properly?

@alanrobbo6980 4 жыл бұрын

djangodev, After a Tool-Change Why do you want to go back to where you were, surely you’d want to go to where the Next Tool-path begins.

@Nodeagent 4 жыл бұрын

@@alanrobbo6980 Sorry, if I have a tool change programmed it does fine. When I pause it and change the tool manually or pause for any reason, it doesn't start the next move in the right spot upon resuming.

@alanrobbo6980 4 жыл бұрын

djangodev, after a Tool Change, The next line in the Gcode should tell it where to go next.

@alanrobbo6980 4 жыл бұрын

djangodev, This is a Tool-Change Macro, the Only positions needed to know are Where the Tool-Clips are. Your Machining Position is not needed, this is Controlled by the users G-Code.

@nurivangalvanrodriguez8395 3 жыл бұрын

please help me, the generated g code ( file extension is .tap) (SPNDL 1200RPM,FR 2500 MMMIN BROCA 0.25 INCH ) (MACHINE) ( VENDOR AUTODESK) ( DESCRIPTION GENERIC 3-AXIS) (T1 D=19. CR=0. TAPER=90DEG - ZMIN=-10. - COUNTERSINK) (T2 D=4.762 CR=0. - ZMIN=-9. - FLAT END MILL) G90 G94 G91.1 G40 G49 G17 G21 G28 G91 Z0. G90 (2D CONTOUR3) M5 T1 M6 i want to know if the M6 in this g code will work as well as the one in the video if i configure the mach 3 properly as shown?

@alanrobbo6980 3 жыл бұрын

Hi, this is only a Basic Tool changer, If "M6 T1" is used, the Macro should Change Tool to Number 1. It will not Move anywhere, it will not set any Tool Lengths. If you need anything Additional, that can be achieved by Editing the Macro, by you or me, However if I were to do it, I would need to know a great deal more about your system. Hope this helps.