I should have another one out soon, all I have to work with is my phone so I'm limited to what I can do. I'm going to keep pumping them out though
@BigDsRc5173 ай бұрын
Take a small drill bit and slowly carefully drill that flat brass and you can get to your adjustment screw!
@Billy_The_Kid-3 ай бұрын
I didn't trust myself to do that, I took the lazy route 😂 the Needle itself only has one notch on it so I wouldn't have been able to adjust the flow of fuel at 1/2 to full throttle, so I'm glad I bought a whole Carb. I do recommend doing this for anyone not wanting to buy a whole new carb though. Same concept for your Jets, if you trust your work you can increase the sizing of your jets with a drill bit.
@alphamusic51429 ай бұрын
Dude I love your videos
@Billy_The_Kid-9 ай бұрын
When I was looking into buying this thing, I couldn't really find many videos on it. So I'm documenting my journey with it in great detail for those that are looking at what this bike looks like, sounds like, and common issues. Since I'm daily driving this thing I'll get to know it pretty well. I've been compiling videos by people that actually know what they are talking about so people can work on it themselves if they choose to do so. A lot of people with GY6 engines start out with a 50cc then immediately bore it out or buy a 150cc. I want to keep it 50cc, so others that want to do so as well have a general idea of what they may want to do.
@xeffey9 ай бұрын
thank you for making videos on the venom x18, would you say its a good starter?
@Billy_The_Kid-9 ай бұрын
It depends on what you're wanting to learn. It is an automatic, so you won't get the full motorcycle experience, and it's slow, but if your wanting to learn the basics I'd say it's a great starter. If you know how to ride a bike a little crazy you should be good. The biggest thing you need to learn is counter steering, and keeping yourself balanced at a snails pace, but you can use your feet once you are going slow enough. If you have any other questions feel free to ask, and I'll do my best to find you an answer. If you want to know anything technical or mechanical I'm making a playlist with videos by professionals that know what they are doing. My videos are just for people looking to get this bike, and want to know what it looks like, sounds like, ect. When I was looking into getting this bike there wasn't much out there about this bike specifically, and I still don't think there is, but you can find videos all day about the motor it uses. Another good channel is Mike Check Moto, he has one too
@orietv18537 ай бұрын
Hey if I buy this motorcycle do you think I should be fine if I keep it completely stock. And if so what's the top speed stock?
@Billy_The_Kid-7 ай бұрын
It depends on your body weight, I weigh 130ish and mine goes 35mph. You should be fine with a stock carb, but at some point I would at least have it changed to an aftermarket one so you can tune your air to fuel ratio more accurately. It can be the exact same size, you don't have to go crazy, if you do decide you want to change it out, and tune it yourself (and you don't know what your doing, not that I'm saying you don't just offering knowledge) I have a playlist on my channel called "Scoot Stuffs" I'd give it a look. Videos by real mechanics and professionals, extremely detailed, and there are multiple videos on the same topic because some videos leave things out. If you have any more questions feel free to stop by here or my Discord
@drunkclown919 ай бұрын
@billythekid I have the same bike, just got last week. Do you want to exchange ideas??
@Billy_The_Kid-9 ай бұрын
Yeah, I'd be down. I'm not going to do a big bore kit or anything. I'm going to keep it at 50cc, just going to try to squeeze as much out of it as I can and get it running how I want it to
@drunkclown919 ай бұрын
@@Billy_The_Kid-I’ll definitely be going all out in every way. Looks and power. It’ll be my transportation for the next 2 years :(. But yea, just trying to figure what to get first
@Billy_The_Kid-9 ай бұрын
@@drunkclown91 don't let my decisions hold you back, just be careful on how big you go with the big bore kit, because it thins out your head and makes it heat up faster, so if you are driving long distance you would be more prone to overheating, I don't know what the sweat spot is, you would have to do some research. I feel you, this is my ride for the foreseeable future
@Billy_The_Kid-9 ай бұрын
@@drunkclown91 I chose this model because I liked the Guages, they aren't exposed, and you aren't sitting straight up right, and being on a scooter you have to take the wind into consideration
@drunkclown919 ай бұрын
@@Billy_The_Kid-oh no I understand haha, I read 80cc is a happy median. But also getting an actual cooler (simple instal) will help mitigate that. I gotta travel 12 miles to work and this 25-30mph doesn’t cut it. A lot of hills so that’s about my avg
@drunkclown918 ай бұрын
How’s that carb treating you?
@Billy_The_Kid-8 ай бұрын
It's doing much better than the stock one, I still need to buy jets for it though
@drunkclown918 ай бұрын
@@Billy_The_Kid-did you conclude any performance increase? I’m at 500 miles now. Starting it I gotta give some gas for a minute
@Billy_The_Kid-8 ай бұрын
@@drunkclown91 if anything the jets that are in New carb are the same, I was just able to tune my idle so it didn't die when I come to a stop. I still need to do my valve adjustment and remove the EGR, but I need to find a block off plate. It's running better than when I bought it I know that for certain. I imagine I'll start seeing a power increase once I get the correct carb jets and adjust my valves
@Billy_The_Kid-8 ай бұрын
@@drunkclown91 in this video I have something plugging that 4 holed piece of plastic, try plugging up one hole. You may be running lean
@Billy_The_Kid-8 ай бұрын
@@drunkclown91 I don't remember who I mentioned it to, but I have a playlist called #scootstuffs. It is a compilation of videos on our motor by people that are more than likely certified, or I at least trust their judgment