Lmao, i didnt even notice this, since almost all of the tractors i use are modded. Kinda lazy if you ask me, since they had 2-3 years

C'est vrai et je trouve ca dommage

Why cant u shift it in neutral? Yes it wears more on the brakes, but its not like its dangerous to shift to neutral

@@rasmusbostrup823 if your brakes fail u wont be able to shift into gear so easily to slow down

I'm not a modder and I have never done something like that but I would just look in the xml of a vanilla vehicle how the gearbox was programmed there and then copy paste it into the gearbox section of your pickup truck after deleting the old gearbox script. Then just adjust the gear ratios (the higher the ratio the faster your vehicle can drive in that gear and the more torque is needed), because tractors have much lower gear ratios than cars to get more torque to the wheels. Btw the gear ratio is just the number of theeth on the input gear (the gear which sits on the shaft of the engine) divided by the number of teeth on the output gear (the gear that connects to the wheels). So when you have a gear ratio of 1 than that means that the wheels spin exactly with the same speed as the engine (same amount of teeth on both gears). If the ratio is 2 then the wheels spin double the speed of the engine (rpm of the engine times the gear ratio is the speed of the wheels. The torque of the engine is divided by 2 to get the wheel torque.) I hope that this comment could help you. Like I said before I'm not a modder but everything I've said should be true.

aww hello little baby grim reaper ☺️

yes

@@KanyeAbdullah you dont

u need the gearbox and 3 pedals

@@SchwoazBua I have them

@@giuseppebasilone938 yes me too, so u need to go to settings, go controler settings, scroll down to shifting, then you only have to assign the buttons, especially the clutch axle, a tip if you also have a racing gearshift on the steering wheel, nemm this as a group shift

@@SchwoazBua can you make me a video of how to do it because I didn't understand correctly

@@giuseppebasilone938 yes I can't if u want but I need more time for that but I will speak German yk u must hear it with subtitles

HEY MAN PLEASE HELP ME!!!! I just inboxed my longer lk4 yesterday and I’m trying to print a vase today. Under Cura I set the print speed to 30 mm/s like recommended but as I started printing under the settings on the longer it shows “speed” as 100%. Is it still printing at 30mm/s? What does the “speed” mean under the settings on the actual printer? Should that be 30 too?

@@tuneboyz5634 idk i don t play this game, ask kingmods for help

@@dizzy8835 its ok buddy dont worry thanks :D

The french plain

Exactly. In a real ihc1455 you can drive off in 3rd gear