The black ones appear to be available. Link in description.

The terrasaur model was first released as a custom model in D2 from Fiddleback Forge.

Got one, ergonomics on the Terrasaur are great and MUCH better if you slip a bit of street bike inner tube over the handle (tip: get the piece of inner tube wet with some rubbing alcohol first, well slip on easier), adds a little cushiness and is *very* grippy. Sheath is a work in progress and that *is* a Mora ripoff. Retention is with a couple of nubs on the inside of the sheath that fit in the dimple in the handle. Apparently they at first had complaints that it was too difficult to get the knife out. It remains very awkward to get the knife out of the provided sheath but retention is now not very good at all, nubs don't grip it well enough now. Ditched the sheath, looks great in a leather sheath that came with my Kizlyar Yeti but am using a sheath i made myself for it (with the ranger band handle treatment, it rode much higher in the Condor sheath with a good friction fit and made the thumb ramp actually functional which was cool but left a couple of extra inches in length to the sheath and i didn't want to cut it). Didn't come very sharp, just barely 'utility' sharp. My copy appears to have an ever so slight hollow grind and wasn't a really beautiful, perfectly even grind so went with a secondary microbevel rather than put all that work into a true scandi. Having difficulty getting it anywhere near as sharp as my Ka-Bar and i've gotten pretty good at putting fine edges on blades. There's a problem nobody's talking about - the heat treat, it may not have one. What notes i could find on it, Condor says Rockwell between 50 and 55; that's quite a spread and pretty low for 1095 (ESEE says 56-58 and Ka-Bar says 57-59 for theirs, can't find anything on the Mora Garberg beyond a note about 'high hardness'). Have suspicions that even that '50-55' may be just a ballpark. Accidentally dropped the knife about 1.5 feet, came down tip first. Didn't break. Didn't bend. It did mushroom. Seen that in lead bullets but can't say i've ever seen that in a knife before. The Terrasaur is a decent beater utility knife but you can find those at a gas station for less and with better fit and finish and decent sheath at that. But if you've got a soft spot in your heart for mongrel puppy dogs, the Terrasaur might appeal to you.

Was in process of watching Brian's take on this knife when you popped up, great review from both of you. Might just have to get a couple!

This will be my first Condor. I like it!

I really hope this one come her to Sweden. I do have several Condor knives but I'm really excited to get this one for some testing on my channel. Looking forward for a bit harder test on this knife from you Chris. Thanks for the sneak peek 😉🔪

That looks like a perfect knife for me in my price range. I'd probably get one if I wasn't away doing construction. Hopefully there will still be plenty around in a month when I get home. Keep it up with the good videos. I especially like these budget friendly items.

Both of them look really good. The gladius looks like fun.

Just got one! Taking it out next week. I have a bush lore that got as a blank and has been very durable.

Awesome Chris, just purchased a Terävä Jääkäripuukko 110 finally after your amazing review and often saying it's still a great knife 👍 can't wait to get out and use it😜

I like it, I have several condors and they’re great budget knives! I enjoy using as much as LTW N BHK knives. Love my Moras as well. Lots of sub 75 dollar knives that are awesome!

I can’t wait for this to hit the market! Looks awesome

man good on condor. they have been killing it and really have a good feel for the market

I cant wait to see the Gladius, Ive been wanting to own it since I saw the 2019 list last year.

A interesting knife I hope to get one when they release them.

A true budget work of working art.

If I didn't already have one of those hard to get Jääkäripuukkos I'd definitely be interested. Looks pretty good for an affordable knife. However, as crazy as it sounds to knife guys, I'm perfectly happy with the one I have and a backup/EDC folder. :-)

Nice variant of a classic. will look it up

I was about to go for the Mora , this Condor will do just fine .. I'm Sold !!

I own the Terava Jääkäripuukko 110. I would just love to see a head to head video between the two knives. Thanks for the video my Bladed Brother ⚔️

I was lucky enough to get one in April from an amazon store (Canadian or European?) for @$49...no longer in stock. It's a sweet knife, great knife for the money! and mine is the OD green for real. lol. Not as robust as a garberg....more like a bushcraft black with a full tang!!!

Great knife, mine came in the mail today from Knife Center!!! O.D. GREEN!

Hey Chris! Where is part 2? I love this knife and there is great price on it even here in central europe. Must have it!

WOW! Looks awesome!!!

Very nice knife, thank you sir.

Welp Chris, I took your word again and ordered the knife late last night. Should have it in a week or less. I've purchase a couple of budget knifes on your recommendations and so far I've been happy. My favorite is the Kershaw Camp 10, very nice budget chopper. I call it Vanessa. Yes, I name my favorite knives after my favorite lady bushcrafters. Maybe I'll call the Terrasaur Lilly or Brooke? LOL

I saw Joe showing it off at Blade Show 2019 . I will probably pick up all 3 . I still like the Benchmade 200 Puukko in 3V.

I dont have a problem with condor I have beat the snot outta my woodlaw and bushlore and love them both and I will be ordering one of these aswell

Looks really nice

Awesome budget knife!

Condor, do a 6inch or 5.5 version

U.S. Legion Custom Knifeworks found on eBay... full tang, tough as hell, cheaply priced for awesome value...worth a look in my opinion

Nice now I can afford that benchmade puukko I've been wanting.

Schf36 still kicking asshat 1/4inch 1095 hc! The 37 is next to try

Love it.. I really like 1095. I'm surprised the sheath is well made. KIZER just came out with the Sequoia. Contoured G10, 1095 steel and a kydex sheath. And it has a reasonable price tag.

Great video

Sounds like a Garborg killer to me! Luv the Garborg though...

I want one for sure looks like it has full tang to rite ..

Very nice professor!👍🏻🇺🇸

Black one was in stock, Just ordered mine. Thanks Chris!

Under $50 that sounds good to me. There is a few knives that came out in 2019 I wouldn't mind having.

Very cool,,, we need a stockist in New Zealand ,,,, I wants one

Really nice 👍

I was interested in this one at first until they took so long to release it. The Real Steel Bushcraft in D2 that I've had for a awhile is only like $5 more expensive & way better blade steel + kydex sheath & micarta handles.

Had a ?? How is Will doing? Just wondering about him

I’m normally a Stainless guy since I live in a wet area but I’ve been wanting to give 1095 a shot. This one might fit the bill at its current price point. Thanks 👍

Hi chris greetings from south africa.Love yr vids man!!! Could you pleeeeeeze do a review on the condor hudson bay knife?

At first glance it reminds me of the Esee RB3.

What about the Condor Kephert? I like the look at this though.

Would really take a lot for me to take another chance on a condor.. they have always been so hit and miss for me. But for the price..

I want one!

Were the mushrooms for the artistic backdrop?

How many knives do you need? Prepared mind 101 never have enough.

It looks like the Benchmade 200 puukko

Very cool! I'll watch this one with great interest! Top 3 comment! 👍

Hey chris was that a full tang knife?

Between the Mora bushcraft black and the condor Terrasaur, what one do you like better?

Tell will we all are pulling for him.

Is it full tang?

is the handle a hard plastic or more softer than it looks?

I have a question and I don't know if you're allowed to answer this or not out of this knife the Mora garberg or the varusteleka Jakari puukko 110 which one is the best in your opinion

Cool.

The knife is still delayed. I am wondering if they received a letter from Mora company they are working through. Still, hope it comes out for that price. $42 seems like a steal!

Ordered mine (black) … Strange check out. Shipping fees moved over to "taxes" after purchase. Receipt shows $0.0 shipping. Hope they don't ding me later for another shipping fee.

I feel like I've been hearing about the Terrasaur for over a year now... Not sure if my brain is just kurfugled or not.

It looks like you could dive with it

Wow !

Just waiting for them to become widely available. 👍

Kind of off topic, but what kind of ferro rod are you using? That thing throws an amazing amount of sparks.

my problem with all condor knives i have bought is they are not sharp

You know any good welding jobs in ohio I'm looking to move to a free state and leave western new York state I can tig mig sub arc and orbital weld

Random question what angle of a grind did you put on your TOPS BOB?

I was thinking "just throw it in the bag" beore you said it! #SamePage

can you stop doing this!? Everytime you upload videos like this we get overrun by questions to test it too! I should just make a video of every knife you do a week after. Big Kiss - The DBK Girls -

Brian from Survival on Purpose, also did a review, it seems to be a very good knife.

countryknives says they have it in stock for $50.00 not sure if thats bullshit or what you probably buy it then get an email saying its on preorder be nice to know a date when they are supposed to be available

Is the handle soft feel like the benchmade puukko or hard like a mora?

My first condor was the rhodan ot was dog shit.but condor has reinvented itself nice stuff

Sharpen little and often! Ceramic rod is perfect to maintain it and a strop

👍👍

I did a review on this blade it's definitely badass for 40 something buck's. 👊💀

Well Shucks..... Another knife I have to have. 🤷‍♀️

all that AND made in America!? sign me up!!

Knife looks good but that knife sheath needs to go it covers 3/4 of the handle just like one of those Mora knife sheath. I want my whole hand on the grip so it can be drawn fast and easy. Who says a bush craft knife needs to be so difficult to draw?

Is the sheath ambidextrous?

Shit I got mine months ago with the new sheath you just pre ordered it came into order in like a week got it in two day's all you gotta do is order it and wait. Not a long wait either.👊

Need stainless steel version for those of us that live around salt water and get things exposed to it daily.

Mora Kansbol money wise probably competes though it's sanvik stainless and the grind but people on KZfaq compare it with the garburg which I don't understand they are totally different?... Is that Condor full tang or full up to the lanyard hole? Or less?

Looks like BM puko

how can it be a true bushcrafter if it is not o1 steel with a 0 degree scandi.. just joking Chris. great vid

Mora Kansbol comparable.

Some company is selling these on Amazon for $85 + shipping. Ha!

My Girlfriend will killing me, with the Terrasaur 😄 if i buy this nice looking knife....damnit...Knives are so amazing, Straight Razors also....

Condor is STILL hit or miss as far as fit and finish, heat treat, etc.

Looks like a mora copy for more money. I'll stick to a esee 4

Id like em better if they cost more..;)

Chris, this knife has been available for a while. I posted two videos with the green one a couple months ago. I posted them to your FB group then. It's a great knife. I want the orange next. Thanks. - Mark Check out my field use video - kzfaq.info/get/bejne/oeCeeMlirt7Tlp8.html

Agree the Price is Right 4 most of Ya's sadly 4 me Ole DAV not close ! So Carry On w/my 25+ yr ole GI mora now fugly but Luvly 2 me still. Great site dream alot here someday maybe Santa won't do a flyover but Land LoL ;)

you will find out when it collects water and corrodes under the rubber.

42 bucks?! Budget?! Real budget deal is Mora Basic 511 or Classic N 1.