New front brake discs & pads - Ford Mondeo Mk4 (2007

No video

New front brake discs & pads - Ford Mondeo Mk4 (2007 - onwards)

Рет қаралды 142,487

Күн бұрын

How to change the discs (rotors) and pads on your car. In this video I show you how to replace the discs and pads on a Ford Mondeo Mk4. Links to everything you need for this job:
- Discs (Genuine ford part number 1500159): bit.ly/29FEFqR
- Discs (Quality Alternative): tidd.ly/3ab58ac1
- Pads (Genuine ford part number 1747043): bit.ly/29wXj3I
- Pads (Quality alternative): tidd.ly/b8ee3775
- Ceramic grease: amzn.to/29vlrma or tidd.ly/27454ebd
- Thread lock: amzn.to/29FJXmf
- Brake cleaner: amzn.to/29wY2Sn
- Gloves: amzn.to/29wYb8y
- Hex bit set: amzn.to/29vmwKH
- Pipe grips: amzn.to/29pwpxz
- Bar clamp: amzn.to/29wYCzF
- Brake hose clamp: amzn.to/29yDPhu
- Ratchet and socket set: amzn.to/29FIexu
- Breaker bar: amzn.to/29wZaWp

Пікірлер: 70

@Mr.M1STER 7 жыл бұрын

Great video. One thing I also like to do before I take the caliper off is get a big-ish flat head screwdriver and put it in between disc and pry outwards which will push the piston in a little and will make it easier to take the caliper off when the bolts are out. Just a small thing to add though.

@anthonykent7983 2 жыл бұрын

Super useful thanks. I always look to see a job done before trying my self. Your better than a Haynes manual 🔧🔧

@aziidahaka 7 жыл бұрын

Thanks. Great video. Was quoted £390 at Ford for front discs and pads replacement.

@ashwright7675 2 жыл бұрын

A great video, clear and straight to the point. I watched this twice and did the front disc's and pads on my Mk4 TXS with no trouble at all, so thank you for that.

@flemwad 5 жыл бұрын

Impossible to do a better video describing this job... 10/10 thanks

@gracek318 7 жыл бұрын

Very good and straightforward video to follow. Thanks for posting.

@Bajlon 6 жыл бұрын

Thanks a lot for this video! I've just changed pads on my Ford with your help. 👍

@munro12345 7 жыл бұрын

Great video thanks - clear and showed every step uncut - perfect!Just done the brakes on my MK3 Galaxy - lovely :)

@mikeh7771 Жыл бұрын

Thank you for the tutorial. Just done my Mondeo 👍🏽👍🏽

@jezs5362 7 жыл бұрын

Great video. Many thanks. Helped me change the front discs and pads on a 2011 Galaxy. Torque settings would be helpful for the main bolts.

@saltire546 7 жыл бұрын

Thanks for doing this i would not have known to open the bleed nipple and clamp the pipe .The quality of after market discs is not great from what i have been told.

@zelenyjan9 8 жыл бұрын

Great Video. Keep up the good work.

@GreasyPrimate 8 жыл бұрын

Thanks. Will do.

@luffa04 8 жыл бұрын

You make that look really easy. Cheers

@dannydukedetects4393 5 жыл бұрын

Excellent video just the Tuition I needed to do mine next week

@SimenLinderud 8 жыл бұрын

Great stuff! I actually used one of your videos to replace the suspension at home, worked perfectly. Now I'm looking to replace the turbo on my MK4, could you do a video on that?

@smarkc7417 6 жыл бұрын

Thank you so much. Your vid made the process very simple. Job done.

@Raitanator 7 жыл бұрын

Thanks mate. Saved me a hefty sum.

@sicks6six 5 жыл бұрын

excellent video, save some money doing this job our self's now, ford disks have that washer instead of grub screws, rated 10/10

@hugo186 7 жыл бұрын

Thanks WILL Do. Dziękuje za pomocny film. REGARDS Pozdrawiam POLAND

@benstan7487 7 жыл бұрын

Great video, any chance on a power steering fluid flush video? or is it just the same as most video's online? thanks

@kokkie08 6 жыл бұрын

Nice done looks easy this way 👍

@chesham123 6 жыл бұрын

Thanks, very clear and helpful

@ranat5526 5 жыл бұрын

Copper hammer and some penetration oil works best to remove old rusted Discs!

@noelmartin2398 2 жыл бұрын

Would the brakes need to be bled after opening the bleed screw

@B1gLe0 6 жыл бұрын

Good video. Thanks mate

@PaulB__ 6 жыл бұрын

100% pro job!

@Gibtom125 7 жыл бұрын

Good job well done mate, thanks

@mrconta 3 жыл бұрын

nice video. Whats the torque on all screws you removed?

@nicholasswatman3891 7 жыл бұрын

Good work.

@liam3664 6 жыл бұрын

Thank you for a the instruktions.

@flugheim 2 жыл бұрын

Whats the size of the nuts on the caliper bracket?

@Cardnim 6 жыл бұрын

Great video. I know its a bit old now but really hoping you are still active on here cause I have a question that seems to be no asnwer for on all the usual forums - where can you use a trolley jack on the Mk4 Mondeo?! Ive just come back inside from finishing another oil change on the car, and once again (like last time) I bent the sills because of the trolley jack lift. Then, when its up in the air on the jack, I cant get the axle stands in. What a faff! It would be fantastic if you could let us know where you're jacking and axle stand locations are. Cheers mate! :)

@cliveosborne8195 6 жыл бұрын

Use the trolly jack under the subframe with a piece of 4x2 on it, there's 1 front & back.

@dannymccann 5 жыл бұрын

@@cliveosborne8195 Is it possible to link to a picture? This is the only thing stopping me from sorting my brakes (they aren't dangerous, just would like to do them before the weather turns!), I've got ramps for filters and have changed a flat with the factory Jack no problem, just don't know where to put the trolley

@munro12345 7 жыл бұрын

Great, clear video. Would this process be the same for a MK3 Galaxy? ( I know the parts are slightly different but mechanically both cars are similar)

@naidalloyd4074 2 жыл бұрын

No torque settings?

@Ovi22 7 жыл бұрын

What is the BEST brake disc for mk4?

@dontlike2 8 жыл бұрын

Any chance of doing a video or posting a link of the proper jacking and jack stand points on this car? Its not really clear in the manual.

@teecee90 8 жыл бұрын

I'll see what I can do. Cheers.

@dontlike2 8 жыл бұрын

Thanks mate, love your work :)

@dannymccann 5 жыл бұрын

@@teecee90 Hey, did you get round to this, also confused and googling isn't really helping!

@Ovi22 6 жыл бұрын

For mondeo mk4, 500 ml brake fluid it's enough ?

@h4ckkk 7 жыл бұрын

Thank you

@jonadams4394 4 жыл бұрын

Hi I need to change discs people telling me 2 diffrent types of discs either 13.8 o 15mm I havnt a clue it a mondwo mk4 1.8tdci

@banugaria967 5 жыл бұрын

Great

@982678249 5 жыл бұрын

5:15 My mondeo does not have those "brake disc holders" or what they're called... Could them be found on eBay? If anyone can help please tell correct search word so I can find them, thanks :)

@teecee90 5 жыл бұрын

t982678249 Don’t worry about it. You don’t really need them - when the wheel is bolted up the disc isn’t going anywhere. The clips are just to make assembly easier.

@teecee90 5 жыл бұрын

t982678249 partwerx.com/shop/ford/genuine-ford-mondeo-st220-brake-disc-retaining-clip-securing-retainer-oe-part/

@982678249 5 жыл бұрын

@@teecee90 Thanks for quick reply and link. I think I'll buy them for install at next wheel change, cost is low and I think it's more convinient to change wheels while those retaining clips hold brake discs secured.

@eddieryan7639 2 жыл бұрын

What size hex bit i had a mk3 never needed a hex bit to do brakes now just bought mk4 need to do brakes this week

@kayleighwhitehurst6274 2 жыл бұрын

I'd like to know this too. Although I'm probably getting a whole set anyway so have all bases covered.

@neilfinch8331 2 жыл бұрын

He said Allen key or hex it’s a bit confusing they ain’t the same do you need Allen key or hex

@KAZUYADOG 8 жыл бұрын

Why fit incorrect disc's ?

@GreasyPrimate 8 жыл бұрын

Hi. Did you watch all the way through and listen to the commentary? I didn't realise they were wrong until I was well into the fitting process so decided to fit them for the purpose of the video rather than re-shoot. The only difference to the original discs was the stud holes were slightly bigger. It only took 10-15 minutes each side to replace the discs when the correct ones arrived.

@KAZUYADOG 8 жыл бұрын

Very rarely listen to commentary on YT video's so did not hear you're explanation in commentary as to why you used the incorrect disc's (appologies for that). The disc's you used do have 14mm clearance holes for the larger 14mm x 1.5 studs fitted to S-Max and Galaxy they also have the disc securing screw hole,Mondeo use 12mm x 1.5. You do good video's with good links.

@jamespage7002 6 жыл бұрын

For the life of me my front discs is not coming off that easy, totally stuck on but good video

@MrTriggerste 6 жыл бұрын

James Page how did you get them off

@chucky2316 Жыл бұрын

@@MrTriggerste I'd imagine penetrant spray a cup of tea later and a good hard whack

@dmh151076 7 жыл бұрын

Isnt clamping brake hoses dangerous?

@twig3288 6 жыл бұрын

No need to clamp the hose, just press the brake pedal and prop it with a stick against the drivers seat, that closes off the fluid supply from the reservoir. Then open the bleed nipple and press in the caliper piston. To avoid a risk of a flat battery, remove brake light fuse first.

@mjyumping 4 жыл бұрын

@@twig3288 I imagine the brake light won't work anyway when the key is in of position.

@twig3288 4 жыл бұрын

@@mjyumping Try it.

@mjyumping 4 жыл бұрын

@@twig3288 mine doesn't

@twig3288 4 жыл бұрын

@@mjyumping Good. It's worth checking to avoid running the battery flat. With the brake pedal depressed you can spend as much time as you like with the flexible hoses disconnected and you won't lose any brake fluid and you don't need to crush the hoses.