Thank you, thank you, thank you, for pronouncing Stribog right. Thumbs up immediately before 20 seconds in the video.

Thank you for the great review. It helps me a ton when I need to put mine back together after cleaning. I have the SPA3 with the straight mags with the metal on top. I had frequent jamming due to the design of the mags. Global Ordinance replaced all three mags, at no cost, with ones that are curved and I haven't had a single jam or misfire since. Their customer service has been great--something you rarely find these. Keep up the good work!

That intro was such a hard flex to watch! Good for you! Us poor citizens are just waiting on availability. Get em and they'll sell.

I bought one of these a year ago pretty much off of your review of it. I'll be finishing up a lot of 2.5k rounds through it while I am off for Christmas Break. I reload and have been running a Lee 124gr TC bullet that I cast from wheel weights and Powder coat. I have used 3.8grs of Tightgroup exclusively with this bullet in this pistol. That's all that has been fed through it save for some Ranger T +p to show function. It's been a pretty good gun. It got it with the brace but I have been using a single point sling off the rear lately and like it better pushing it out. I have both the curved mags and 2 of the straight ones that came with it. All of the mags I have run great. I'd like to try one of their more traditional pistols for range use and just for the hell of it.

Superior review! Just subscribed to your channel. One improvement Stribog could make is to come up with a way to retain the roller delay pin so that it does not fall out and get lost when the bolt carrier assembly is out of the gun. MP5 rollers are retained as you probably know.

Chances are high, that this in the 4.5 inch version will be my next gun purchase

Just bought mine (SP9A3S) and took possesion of it today. I keep taking this firearm apart to just get famliliar with it and especially the operating system. This really is a fantastic gun. Dry firing 40 times I felt the trigger was satisfactory and AR'sh. After shooting 20 rounds or so the trigger felt completely different, (enough that I stopped firing) the little bit of "mush" before the break completly disappeared. The trigger lightened a bit and smoothed itself out to be an amazing trigger after 100 rounds. Mags are solid feeling and no concerns there (curved). Refined and amazing gun. Great review and field strip, thanks!

Nice!! I just bought the 2nd gen stribog.. My first subgun. Would love the new one, but its very hard to get. I wonder if the new mags would fit the last gen?

I have the A2 and love it .

I hope they’re going to restock soon... I missed that Friday recent release to only 3 shops 🤦‍♂️

Awesome! When can we expect the “What’s for dinner? test” footage to drop?

Love my A3 very cool nice dependable gun

Great review sir.

This should be really good 💪💯💯🎯

My wife is Slovak and doesn't want me to get one. Going to anyway. She will get jealous if I play with it for sure.

Looks like a polished design. Eagerly awaiting reliability and durability trials.

I wonder if Grand Power will sell a retro fit like to make A1’s roller delayed as well that would be interesting and they can have my money now for a retro kit

Put two magazines through my A3 yesterday. Recoil impulse is pleasant. I think it looks cool. Magazines suck to load, trigger is mediocre at best, bolt release needs the HBI upgrade. If it doesn't make 500 rounds without a hiccup I'll sell it and get a better gun. Lots of reliability issues with the new design. If I don't have issues, I'll keep it and do something with the trigger and switch bolt releases.

two questions, can you put the a3 bolt into the a1 or is there something different in the receiver? And have you tested the stribog drum yet? or even heard of it? It looks like f5 makes the only one.

man you gots the best job 👍💥✌💥✌

Great review. I had one of the detainer springs come off the front pin between upper/lower. It does not look simple to reinstall. Do you know any resources where I can learn to reinstall?

Question. Can I put in the JP 3.5 lbs trigger spring kit?

Where can I get the blocks from?

My question is .. have the problems been fixed already? Looking to purchase one from my local shop

I'm guessing that the charging handle pushes on the the bolt carrier just below the locking part that sticks out in the front, correct?

Does it fire with the brace closed? It looks like the brace would block the ejection post.

So, I just watched Sage Dynamics review of the A3. He had lots of problems after his signature mag dumps. I don't plan on running mine like he does, but I would like to know if there has been a response?

Hold on, looking at that roller-delayed bolt... it looks like it could just drop into one of the newer A1 Stribogs (my model is one of the newer A1's that has that same single-rod buffer as the A3). Is there any noticeable internal structural changes between an A1 and A3?? The upgrade being that simple would be heavenly

I am excited for the "whats for dinner" on the A3!

No recoil 😳

Man I’m picky about breakdowns lol it was driving me nuts watching him fumble so many things dropping that roller was about to give me a tick 😂 😆 😝 I would have redone the whole video just to make it smooth lol but very good review actually.

They should make a 5.56 or 7.62x39 assault rifle with that roller delayed blowback system.

100% Super star gun

I've been waiting for this gen3 stribog to come out before deciding between it or the AKV but after watching mr.gunsngear video on this it seemed pretty disappointing. Especially with the bullets falling back into the gun and fouling it up if you dont point it down when you clear the jam.

Can wait to get the new one that takes glock mags the 3 G

Does it feed hollow point and flat nose ammo well? I know that’s an issue for a lot of PCC guns.

flexin on that intro lol

Question. In one of your videos you shot magtech 92.6 hollow point from your stribog. I believe you shot 3 rounds and it ran fine. Have you ran anymore of that specific ammo? I have been seeing mentions of failures with certain hollow points in forums. I just scored about six boxes of these but haven't ran them yet due to ammo shortages. If they dont run well I will probably end up trading them off for price equivalent in ball. Anyone else's input on the matter would be greatly appreciated also.

200 rounds in to my SP9 A3. Gun busted. I think the recoil spring is broken but not sure. Back to grand power then to gunbroker it goes. Too bad, recoil impulse was quite nice.

Which pistol brace have you found to be the most ergonomic option on the Stribog?

How do you remove the charging handle to move it to the other side for a lefty?

How did you get the thread protector off? I just picked up the Gen 3 and the thread protector will NOT budge. My Gen 2 came off fairly easy but this SOB won't budge.

Is the A3 BCG interchangeable with the A1 gen 2 BCG?

I need one 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎

What will the range review video come out??

If you could find a way to get the Stribog Taranis 22lr, I'd love you forever. I want one. 😺

*MAN* that roller just wouldn’t stay in! LOL Does having 3 Stribog’s make you 3x’s as cool?? I jealously say yes 😉 Looking forward to the range video, and What’s For Dinner (you know you want to) testing!

...I've been saying it wrong this whole time and NOBODY CORRECTED ME XD

My only complaint is that the magazines are not interchangeable with the pistol ones

I'm selling mine unless someone can tell me how to easily load the magazines??? I've had many guns but I've never had such a struggle. Am I doing something wrong?

So wait, you're a Grand Power fanboy? Hehehe...

Technically this isn't a roller delayed gun. The bolt face twists before the bolt moves to the rear, no rollers as in an H-K MP5 or one of it's clones.

Will someone please tell me what the name "Grand Power" means?

How did you like Slovakia?

AUSTRIA is only across the lawn, why didn't they use glocks mags?

Hey man, I think you got the roller delay mechanism backwards. When the bolt closes, that forward piece continues forward and the pin drops down into a groove. This locks the bolt in place, with the pin down, and it leaves a gap between the BCG and that separate piece. When firing, the delay comes from that pin needing to move upwards. Because the cam surface on the forward piece is angled, it gets pulled close to the BCG again, closing the gap, and letting the pin move upwards and out of the groove. The same is why the charging handle works: you pull it, and it pushes the gap between the forward piece and the BCG together. Which allows the pin to get out of the way. Great video otherwise!

Why put a buffer tube brace on a firearm that donr have a buffer tube 🤦‍♂️...pdw is the ONLY way for a stribog

Get a scorpion 🦂