Thanks for watching. If you found this video helpful, please give it a thumbs up and subscribe for future content.

Very nice. Hope we will get regular video update, good luck bro !

Great Video on the New IVMS!

Assalam alaikum. My name is Abdulhakim. I am writing to you from Bukhara. I work as an installer of CCTV cameras and intercoms. (Hikvision) I often watch your videos. I really like them. And I want to learn a lot from you.

Nice tutorial Following your videos and learning from it. Esp with my new nvr GUI friendly. Thanks man.

Another great video , thank you

This is really helpful, thank you so much!

Thank you for review software.

Thanks for the Video for this Software, good information for exploring this Software

Thanks for video.

A video suggestion: Possibly taking a look at the PT Target Capture cam? Seems like a really intriguing concept!

Thanks bro !!!!

Thanks soo much for this wonderful and educative video. Please can you suggest a Hik-vision workstation model that will be running with 20fixed bullet cameras, 72 fixed dome cameras, and 2 vehicle plate recognition cameras, please?

you hare the best my friend. all my question and new model you know that hello from Mexico and USA Seal Garza

Thank you for tour videos. It was so informative and good. Please I want to ask if I can add third party camera using the iVMS software. I tried adding Geovision camera using the software but it the software did not detect it. I will really appreciate your reply

Hi, very good video. One question...We have this NVR DS-7608NI-K2 / 8P with certain cameras paired to it, and we're using the iVMS 4200 when we want to create an event selecting the cameras that are on the NVR, we didn't get any results, but if we attach the camera separately to the iVMS we can get the event alerts. Do you know how we could solve this issue? Thanks in advance

Hey there, love your videos. I see you mention that you'd rather use VCA triggers over typical motion detection for recording on these systems. Do you have other videos that go over your typical VCA recording set-up? Another question is about remote access. You mentioned you use port forwarding. Do you typically do any kind of VLAN or VPN set-up on the clients side of the network to isolate the system from their network? Or is the NVR password protection enough? Keep up the good work!

Great and informative videos please keep up the good work Question ? How do I get the video wall set up onto iiVMS ? Any chance on a video on how to set up / configure video walls

Hi. Thank you for your videos. They are really helpful. I have a Hikvision cam and IVMS 4200 set up, with IVMS directly connected to the camera. I want to automatically and periodically download all footage for storage in my PC and so that playback in IVMS can play locally on request rather than through the internet which is laggy. Is there a way to do that? Thank you in advance. Your videos have been great.

Great tut! but how do you get multiple clients (from different locations, computers, mobile, etc) to connect to one server that is always running? Can I use IVMS 4200 or is it a different software? I'm kind of lost with all of Hikvision's offerings...

best one

Nice

I find IVMS to be extremely cpu heavy killing most PCs to a crawl. Do you have any tips for optimizating IVMS performance? What is your recommended PC specs?

nice video

Great video. What happened to the red boxes to configure the event trigger area. I can't find anywhere in the new softare that allows me to see or modify it? Is there another video on this subject?

How can I increase the refresh rate of the live view videos? the videos are displayed with slight jumps (as if they were at 10 fps). note: the DVRs (there are 3) are connected directly to the PC to a 1gbps LAN by only one switch between devices and the configuration in ivms 4200 is by LAN configuration. thanks

gracias me sirvio.

Hi, if i may ask, what specification of computer hardware will you use in IVMS 4200? i have approximately 90 cctv cameras it is in group already in ivms, my problem is that what spec should i use for it to run smoothly?

Question for you: can most HIK analog cameras with PoC support, also work with standard RG59 and a 12v power supply?

is this the best software to use with HIK vision NVR ? (for playing back video from the NVR via a PC)

hello sir. can i kindly ask how to setup ivms to remote view those dvr that is in different place?, example is that i am in new york and i want to see whats happening in my house at colombia? or what software i can use to remote view my dvr at different place or different city.. ,thanks a lot and God bless you.

Great videos, so many good bits of info. Q: Is there a way to get emails based on whitelist or blacklist information? Or can IVMs do this?

Hi Dave, great videos. Very detailed which I like. I have 2 HK cams and looking at getting the gen 2 intercom with a keypad for our office/workshop to run via the IVMS 4200. I want to use the intercom for access control with a door strike attached. Wanted to know if it is possible to set a pin code for the cleaners that only come once a week. Ideally it could be set up in a way that their pin only works on the cleaning days in a say 2 hour window. Is this possible? Thanks and keep it up.

Thanks for the over-view. Do you know where the motion detection settings are now kept.. they were in the event management section in a previous version, but i can not find the where in this version 3.1.1. Do i just have to set on the nvr its-self now?

Hi there! Does this software allow for live view from analog cameras? It seems this is designed for IP cameras. Thanks for the great video!

Hello, what's the NVR u're using, and are using an SSD? My cameras and playback take much longer to load

HI Dave I know you are the best in Hikvision. please need your recommendation. I have core i7 and 32 Gb ram which video card are you recommend for optimal result to use IVMS-4200?

Nice video but i have one question that i have encountered. I have Hikvision NVR Hikvision DS-7932NI. It has 16POE Channels and other must be connected using poe swich. Once 17+ Camera connected to NVR iš show as intended but on Ivms4200 side it only show that there are 17 in total but for some reason it lets only 16 Cameras to load on the system. Do other Cameras need to be aded separately or os there some option that i am missibg. T.y. in advance.

Hi, can you help? I have intrusion detection set to notify on the phone however I have cameras configured on to Ivms 4200 on PC is there anyway to get rid off or hide the intrusion detection boxes (draw area) on live view? as it doesn't look good? Thanks

awesome video. can you show me how to set up alarm for mooving vehicle?

In Emap view: can an event pop the preview image up on the map? Not Event centre block, but map's camera preview pop-up???

Am your new student.your tut are awesome.question;talk about ezviz software on pc.thanks in advance

Can you use iVMS to setup which cameras appear on the local live view for HDMI1 and 2 out? I know you can do that for a decoder device, but I’m stuck trying to find out how to do that for an NVR

hey man thanks for the tutorial, its very helpfull. I have a question, how can I setup that system with 2 indoor station(hikvision ds-kh6320-wte1) and 5 Door Station(hikvision ds-kd8003-ime1)

very nice video, I really appreciate. One question about this software ability. Is it possible to get the entire log alarm from DVR to iVMS-4200? Then I'd like to search different type of alarms to see the exact event. The best way should be to double click on alarm event time from list and to have the video recorded at that time. Thank you.

Is there any way to display a recording status/motion status directly on the main view screen per camera on iVMS 4200? Similar to what it looks like on the local NVR 4.0 screen

Hi. Is there anything i can do for when i minimize the main window the other screens to stay there? I have 3 monitors and i want the 2 to show the cameras all the time and to work to other one

Is it possible to have a way to save all the back up online or in a CPU thanks to the storage on server?

list of my equipment : 3 x 256ch NVR's - 1 x 32ch nvr. total of 505 cams of whitch is 70 ptz's. 7 x pc's with IVMS4200.if pc's are rebooted or software is opened, cams take up to 20min to load before live view is available. i am concerned that pc's lan port receives more data than what it can handle. Any ideas ?

@DVSLTD you have a ton of devices on that system

Could you advice. Why I can't get full options for the remote control?

can i saw how many person is connected my my ipcam ? or how many ip's is connected to the cam ?

the software does everything except help you figure out why your device is offline.

Which DVR is the best for iVMS?

Device ,group her kamera eklentisin de group u silip tekrardan yüklememiz gerekiyor mu.Yoksa ekranda gözükmez mi?

I just need a little help to configure TLS connection. I have enabled https on the DVR with self-signed certificate. When I connect to the DVR from IVMS 4200 with TLS option checked (I still don't have the SSL certificate imported to IVMS) I cannot see the Live view of the cameras but the DVR status reads it's online. I can see Live view online when TLS is unchecked though. In the manual it is written that a security certificate can be exported from a browser but I cannot find that option in the web interface.

Good day. Have you got a video to show how to remove the updates on the cameras. Its popping up all the time on the ivms 4200 software

How to fast forward on ivms-4200? Default setting is only up to x16 times. When I move with mouse the time frame under the video, the video freezes and starts when mouse is released. But in some cases we need to fast forward and watch in real time what is happening.

Hi. Thank you for your videos. Can we add a non Hikvision ip caméra to IVMS 4200 ?

Hello and thank you for this video ! Why is it not possible with IVMS-4200 v3.6.0.6 to connect with a web browser on remote computers like HikCentral does ? IVMS uses Nginx but it seems totally blocked. If we do not want to register the devices on the HiKvision portal, it is impossible to view the cameras on several computers because access by a web browser falls on a blank page with an error (IPadress: port) and the IVMS client launches the server no matter what, it's not a real client to connect to a server. Can you tell me more ?

Hi Dave. Does this make sense? I can see your video, and your voice audio is synched to the clicking you're doing on the software. But the insert video's got a horrid lip-sync issue. It can't be my Chrome browser, because, again, the actions of the GUI are in synch to what you're saying!

actually i need help from you dave, i did the same as you shown into a video tutorial thanks but cam1 is stop at one position and others camera is viewing correctly

Hi, thx for the video. hope you can help with a question since i'm new to the HIK ecosystem. with iVMS set up on a computer with the "server" function running is it then possible to install the client-only on other PC's and letting them login to the running server in order to download recording and so on or do you need to setup every NVR on installation of iVMS? I can create users but can the only login to the software on the main PC running it or can they connect from their own workstation to download recordings and so on?

dave how do you turn the white light on and off on the gen 2 cameras

How do you record the footage to the PC without the Hikvision storage server? Can you explain this? nobody mention this.

S;ory for my english. Can i ask a question? i am using ivms-4200 3.9.05 how can i separate the custom view from the layouts in the main view? in my main view it also has the custom view with my layouts and it also shows the NVR or DVR. I want to see in the main view, as shown in the video, separately the cystome view from the DVR - NVR. Like to your video in the chapter for the main view

Can you live stream camera feeds from Hybrid SAN? As far as I understand, Hybrid SAN can record camera feeds without needs additional equipment. This is good architecture because Hybrid SAN located in the rack securly. But I'm not sure Can iVMS-4200 can stream from Hybrid SAN? Can I assume this will be same as demostrated in this video?

Does this version include pcnvr? Or it is just player, and other device for recording is needded?

Is it possible on the DS 7204 HUHI K1 to crop the camera to be displayed digitally zoomed in live view all the time? (it's very wide, so I'd narrow down the live view)

Thanks for this great reference video, friend. At 24:30 you show the remote playback and we can see your events are shown in yellow in the blue seek bar. I have a DS7200 Series DVR with DS2CE16 bullet cameras, but I can't get events to show in yellow, my seek bars are totally blue in both DVR itself and iVMS Client no matter what I do... could you create a new video on how to configure events to actually show in yellow with these basic Hikvision DVRs? Believe me when I tell you I checked and rechecked all settings in both DVR and client, without success.... thanks in advance for your time.

Hi I have a question, I have hikvision ds-k1t341amf and I want to fetch attendance on fingerprint base or face recognition base, Is it possible with ISAPI... plz let me know

I dave, which computer are you recommend for best result on IVMS-4200

Hi, would I be able to change my nvr password on the ivs 4200 software?

HI Sir, nice video, i have one question, i dont get why when i plug the ip camera directly in the nvr, the nvr put this kind of adress 192.168.254.X but with the 254 is not in my range more likely 192.168.1.X, and i am not able the go in web admin page, so can i change this ? Good job aniway.

What is the method to do a virtual line draw across the image in a line crosson event in iVMS 4200 version 3.5, I can not find this function anywhere!. I still have the older version, 2.8, but the latest releases does not appear to have this feature..

Very good video, I would like to ask you if you are familiar with HIKVISION DS-K1T671MF 2MP Access Control Face and Fingerprint Recognition Terminal, US Version?

Hello. when you click on the live view, the window does not open but a circle appears that rotates indefinitely. I don't understand what the problem is. Thank you .

Can the client and server be on different machines?

Hi, do you know about error, hcnetsdk.dll (18), abnormal channel status???. With ivms 2.8.2.2, no problem. Kv8102-im, access control, door-unlocked duration. Thx!

What are the short cut keys for Full screen and quit full screen bro

Hi Icreated an operator profile for my team. I don't want them to have the ability to move the cameras around from said view can you direct me on how to do that.

Any method to restart camera for convert live view in color images from Night vision (b/w). B/W video is still showing in day time too.

how you connected the NVR in your iVMS 4200, the NVR having different IP address?

Any way to added batch of user to NVRs... I currently tasked with adding users to over 90nvrs every month..

Hi, how do I keep the camera I'm watching in Live view? I want to monitor the cameras 24/7 , I can only watch it live for a few minutes before each camera view goes grey with a play button displayed. Im sure its operator error but just not sure how to do this

most people who aren't using this for their businesses would probably like a basic tutorial about how to get motion detected videos sent to their emails, etc. Can you do one, or do you already have one made for this? Not everyone is tech savvy these days, and would like an easy step through for this type of usage. Or is there some other software you would recommend that isn't so robust? Oh, also, one of my cameras is a ptz and I can't seem to see that camera from the internet, even if I replace my internal 192 ip address with the actual external ip. The other camera works fine if I use the external ip. Thanks again.

Whats a simple recording software for an iP camera? Is there a converter you can get to change etgernet to to simple dvr recording software?

Should the H264+ option be used to compress the data and minimise HD usage? I have a new NVR setup with 2 X 4mp colorvu cameras but when playing back the motion triggered footage as people move across the screen the playback will freeze for 3 seconds and then jump forward. I am unsure if this is a steam/camera config. Issue or the NVR is not keeping up with the stream. Any help much appreciated Kind regards Danny

How many days picture store on high disk ?

the on phone disable worked but couldnt get work from website, couldnt find the local section folder

what specs used PC for ivms 4200 sir?

NVR does not show up in search. Have tried to add manually, but shows offline. I am on the same network, attached to the same router, by wire. My previous NVR would show on my network page. All I had to do was login.

The image of the program does not fit my screen. Although my screen resolution is 1920x1080. How can we find a solution? I use the task manager to close the program, as the top is not visible and I cannot access it.

Dear Sir thanks for your tutorial video but after installation my cameras is showing only for 5min. after that again i need to click on play button. and pop msg was your cameras will support for 5min play only. how can i resolve this issue

08:38 why here my iVMS resets menu to 3 basic items and I don't have any advanced settings here (for my camera HiWatch ds-i259M(B)), but during loading menu they are visible (but not long enough)? I am searching for the corridor mode.

How do I delete an IP Camera from the IP camera Management menu? I have many unused channels on my NVR and I can't Add any more IP cameras because NVR says I have no more room (channels) available to add more cameras. I have reinitialized , rebooted, changed out HDD on NVR and the cameras are still there. Any help will be appreciated.

Hi, Could you tell me how I can back up my DVR data to the cloud ? I have an MS One Drive and would like to backup 14 days storage to my One Drive. I have iVMS4200 Ver3.4.0.5 on my PC. Can't see how to do this? Thanks.

This version have Auxiliary Monitor mode? how many cameras we can put in screen with auxiliary mode?

Can I enlarge the pointer arrow.

Hi What's the software for ? Is it for poe switch