Facebook: / wildcatwillyyoutube In-depth comparison of the New Holland 300 series skidsteer and 200 series skidsteer.
Пікірлер: 54
@bkb56682 жыл бұрын
I don't care how much better a person thinks a certain brand is. Fact is that new holland is a solid machine. I own a 2015 or 2016 L230 with 1600hrs., and it is a very capable 90hp machine. I would love a 110-120hp track machine with high flow and rear remotes. I operated a nice asv the largest they make and it was an animal, I was using a huge 90" light material bucket to load top soil on dump trucks. That machine would push the whole pile ahead of it like a large pay loader does it was 🤪 crazy!!! Thanks for the video.
@wildcatwilly2 жыл бұрын
Thanks for watching and commenting.
@radiob866522 күн бұрын
Great video comparing the two!
@wildcatwilly22 күн бұрын
@@radiob8665 thanks
@joeuscanga7235 Жыл бұрын
Great review of the 327 !
@wildcatwilly Жыл бұрын
Thanks I love it
@bear24D2 жыл бұрын
So now the new C300 series have 4 levels of sensitivity on the EH controls, you will enjoy that.
@wildcatwilly2 жыл бұрын
It is an amazing machine! I love it.
@jaredshoemaker91962 жыл бұрын
Probably a stupid question but here goes. Why do most people load them backwards? I did concrete construction for a few years and we never loaded it backwards, and it towed just fine.
@wildcatwilly2 жыл бұрын
Never a stupid question. It's just operator preference. I load them both ways but it is safer driving them off forward then backwards. When I have my mulcher on I drive them on forwards.
@jamesmerkel94422 жыл бұрын
Two fork lift/airplane solid mini front tires u can raise or lower mostly to turn on to save wear on track/belts needed esp smaller models where hving tiny shorter track/belt no big deal.If u r trying to reverse 1 way & drive other way tires down helpful not able to move or if stuck 2nd option, same idea driving both forward belt & tires or not using belt or tire as needed.
@wildcatwilly Жыл бұрын
Thanks for watching.
@connorgardiner37812 жыл бұрын
Ladies and gentlemen I bring a offer to the table
@wildcatwilly2 жыл бұрын
Thanks for watching.
@jamesmerkel94422 жыл бұрын
Making your prts A deer or B say new holland both bolt on idea bc cheaper by dozen & 2hooks beats 1 hook, example diff touch here or there worked in, better polish nut or bolt. U can deer tier 1 or deer tier 2 prts fit day or longer way or stay upgrade or just fixed put back on.
@wildcatwilly9 ай бұрын
I prefer cabbage
@harryfarmingvideo53283 жыл бұрын
Nice machine
@wildcatwilly3 жыл бұрын
Thanks for watching.
@jgolsky2 жыл бұрын
have you had any trouble with losing your tracks on concrete or paved surfaces?
@wildcatwilly2 жыл бұрын
Zero issue with that but I always maintain track tension.
@jgolsky2 жыл бұрын
@@wildcatwilly so do I but have had a lot of trouble losing tracks on a hard surface.
@wildcatwilly2 жыл бұрын
I have seen it several times a track will look perfectly fine but will have a broken cable inside or is stretched on one side then they are prone to slipping off is it the same side every time?
@Bill37nj2 жыл бұрын
Never had any problems losing the tracks
@Bill37nj2 жыл бұрын
Never had a problem with the tracks. Radiator clogs from the inside And it’s a pain to have to clean it take everything apart you just can’t use the power washer and use it hast to come apart
@wildcatwilly2 жыл бұрын
Is the fan reversed? Never had that problem even when sweeping the warehouse... The dustiest job around.
@supastyler111 ай бұрын
How did it go? 2 yr review?
@wildcatwilly11 ай бұрын
She's doing fantastic still have it and going strong.
@supastyler111 ай бұрын
@@wildcatwilly thanks 👍👍, looking at the 338 here in Australia, they are made by case? They look the same 👍
@jamesmerkel94422 жыл бұрын
If both solid tires battery powered 2nd way to out run alligator help way & power.
@wildcatwilly Жыл бұрын
?
@jamesmerkel94422 жыл бұрын
americans might like i ways but want to hve them in tuscany w/new body & bank as well.
@wildcatwilly Жыл бұрын
Thanks for watching and commenting.
@connorgardiner37812 жыл бұрын
BUY A CAT, BOBCAT, or an ASV way more features for the same price with better reliability and performance
@wildcatwilly2 жыл бұрын
It all depends on what dealer is close to you there aren't any of those close to me.
@waynejohnson9855 Жыл бұрын
Bobcat aren’t what the used to be.
@samuelw.39922 жыл бұрын
New Holland use to be good. Their L170-L190 line during the mid to late 2000s were far better.
@wildcatwilly2 жыл бұрын
Those were solid rigs
@jamesmerkel94422 жыл бұрын
why not make plates /weight chrome clang/drop weights too hard some times like at gym. A thin stack of plate weight pulley cable controlled is the way to go. GOD bc all ready proven system. Works well hving weight pulley lowered below grade in a hole u dug just so or raised or easily lifted off & set aside no counter weights needed job. If u can lower weight down 4ft into a whole or up high off ground tight space u get best weight vs no weight set uo off all. if the weight plates stick out 2ft or 3ft out the back u see why no weight option might be nice as well. Keep them thin so 2 guys can lift 150 or so lb weight plate idea or less.
@wildcatwilly2 жыл бұрын
What?
@jamesmerkel94422 жыл бұрын
seems Italy was devil fascist them farming buss came along like Catholic religion new player took over inside out retelling so not just whistling dicey, seems retell b4 I spit balled it out there good fit, working/hand shacking across pond.
@wildcatwilly9 ай бұрын
Thanks for watching
@rontopping20482 жыл бұрын
237 and 337 basically same machine with different joysticks and touch screen, still has worst visibility to the bucket. Lift arms to close to cab door, rough ride , noisy cab . Terrible joystick controls when multitasking. Way behind bobcat and cat . Machine is built by case
@wildcatwilly2 жыл бұрын
Cool
@jamesmerkel94422 жыл бұрын
looks /smell tv vistion like Deer/jesus corp might hve 2 buy up weaker hand player out right if any thing there at All or just manufacture plant for smaller models cheaper than building new & killing off every person at table+ dealer swallowing best prt shot.
@wildcatwilly Жыл бұрын
What????
@jamesmerkel94422 жыл бұрын
I hve never seen or used or watch new holland equipment just speaking out load.
@jamesmerkel94422 жыл бұрын
cheaper prts a factor to deer new soul new heart prts example. GOD
@wildcatwilly9 ай бұрын
Thanks for watching
@craigstevens47858 ай бұрын
Did I just become dyslexic or are these comments a bunch of gibberish?
@wildcatwilly8 ай бұрын
Ya if you decipher them please let me know... Haha
@Bill37nj2 жыл бұрын
C232 I have is junk
@wildcatwilly2 жыл бұрын
That's too bad maybe trade her off.
@Bill37nj2 жыл бұрын
@@wildcatwilly want to get jcb teleskid
@wildcatwilly2 жыл бұрын
I would love one as well however I have a JCB mini X in the shop right now very frustrating having to wait for parts to come from England.