New Holland 851 Baler Sprockets

  Рет қаралды 2,385

Robert Scott

Robert Scott

Күн бұрын

While baling hay I kept hearing a clunking noise like the stop sign was tripping. Turns out some bearings blew out.
0:00 Intro
4:21 Removing Springs
11:59 Fixing Spring Brackets
18:01 Replacing sprockets/Bearings
29:48 Reinstalling Springs
33:30 End

Пікірлер: 7
@leeroyexcavator9149
@leeroyexcavator9149 Жыл бұрын
Wow been rolling with a model 850 33 years never seen a sproket that bad before!!!😮🤯 I have only had 3 go bad in the 33 years I have roled with it. I guess I always caught them earlier. I could hear then start squealing or hear different grinding sound. Sometimes could see smoke from the heat off them also.
@robertscottII
@robertscottII Жыл бұрын
I just replaced the apron chain. And maybe I had the spring too tight. I made some tight bales. I always keep the spring on the tightest setting.
@leeroyexcavator9149
@leeroyexcavator9149 Жыл бұрын
@@robertscottII Yeah I always kept mine around 3/4 pressure so as not to make it so hard on my cows teeth to have to dig out.
@mattemondo
@mattemondo 4 ай бұрын
Very cool video. I have a question: i m interested in the problems that could happen with the baler during the baling season with focus on the idler sprocket/with bearings ? How often do you change them? What is the main cause of idler sprocket failure? Thanks
@robertscottII
@robertscottII 4 ай бұрын
I can only guess the bearings failed due to the new apron chain I had recently replaced. They didn't squeal or anything. Just blew out. I did hear a clunk, and kept going for like 10 acres or more. Then another clunk. If you're replacing the apron should atleast replace the bearings in the upper conveyor sprockets (I think that's what it's called). I think those are some high loaded sprockets.
@Domi-83
@Domi-83 Жыл бұрын
should definitely wear the trashed jeans more often. looks epic! your workclothes simply dont. keep up the good work!
@robertscottII
@robertscottII Жыл бұрын
Ha. Good to last thread.
The magic of a baler knotter | New Holland Small Square Baler Knotter
17:02
Messick's Farm Equipment
Рет қаралды 105 М.
New Holland 851 Baler Floor Chains
16:25
Robert Scott
Рет қаралды 2,2 М.
Самое Романтичное Видео ❤️
00:16
Глеб Рандалайнен
Рет қаралды 4,7 МЛН
3M❤️ #thankyou #shorts
00:16
ウエスP -Mr Uekusa- Wes-P
Рет қаралды 13 МЛН
МАМА И STANDOFF 2 😳 !FAKE GUN! #shorts
00:34
INNA SERG
Рет қаралды 4,8 МЛН
Was ist im Eis versteckt? 🧊 Coole Winter-Gadgets von Amazon
00:37
SMOL German
Рет қаралды 35 МЛН
GIFT WRAPPED | My Trucking Life 🇨🇦🇺🇸 | Vlog #3109
23:18
Trucker Josh VLOGS
Рет қаралды 4,8 М.
New Holland 853 Apron Tube Replacement
11:53
Oil Farmer
Рет қаралды 3 М.
Replacing feeder tine bearing caps on New Holland square baler (New Holland 311)
16:56
Re-timing the New Holland Square Baler - Video 1
18:30
This Life We Live
Рет қаралды 58 М.
New Holland 851 Baler: Apron Chain replace
54:46
Robert Scott
Рет қаралды 7 М.
Baling Round Bale Hay With My New Holland 850 Chain Baler
17:05
Michael Hawkins
Рет қаралды 10 М.
THREE THINGS YOU SHOULD NEVER DO WITH A SQUARE BALER!!! I GOT SCAMMED LEARN FROM MY MISTAKES!!!
10:10
Rolling one the Kentucky way
4:23
baknblack1
Рет қаралды 19 М.
Inside Views of Old New Holland Chain Baler Rolling Hay
11:32
Boehm Farm
Рет қаралды 46 М.
Finishing up First Cutting! IH1066 on The New Holland 853.
13:13
W truck driver #edit #trollface
0:20
TRET1
Рет қаралды 5 МЛН
Efficiency is key 🔑 - 🎥: @engineer_constructions  #asphaltpaving #asphaltpavement #construction
0:12
PavePro Asphalt Solvent and Release Agent
Рет қаралды 4,2 МЛН