New Knives for the Week of March 21st, 2024 Just In at KnifeCenter.com

Рет қаралды 44,555

Күн бұрын

The Prodigal Camera Guy returns! Anyway, we’ve got the anticipated Paramilitary 2 in MagnaCut, new EDCs from CJRB, GiantMouse, Jack Wolf and an affordable Reate. Check out the latest knives and EDC gear from KnifeCenter here: kcoti.com/3TvbGLU
Check out this episode of KniFAQ: • KnifeCenter FAQ #157: ...
Featured Knives
00:00 Intro
00:42 Spyderco Paramilitary 2 Salt MagnaCut: kcoti.com/48ZWqfS
03:32 CJRB Prado: kcoti.com/3TMjJEv
06:18 Reate PL-XT: kcoti.com/492kEpH
09:10 GiantMouse ACE Iona V2: kcoti.com/3x5jA7k
12:10 Benchmade Shootout Sage Green: kcoti.com/494ICAz
14:06 Benchmade Meatcrafter 4”: kcoti.com/4crn97P
16:26 Bear & Son Professional Chopping and Boning Knives: kcoti.com/3J75HIF
19:42 Bear & Son 457 and 484 Slipjoints: kcoti.com/4943fx4
21:51 Jack Wolf Gunslinger Jack Frame Lock: kcoti.com/3IOdQS8
24:17 Terrain 365 Otter Flip ATB: kcoti.com/3IRQcUs
26:08 Nicholas Nichols Dreadnought: kcoti.com/3IIQ89M
27:25 Custom Knife Factory Terzuola Eagle Rock: kcoti.com/3PsxVks
30:14 Bear OPS OTF-400 and OTF-500: kcoti.com/3vlmZyc
Slightly Larger that Average Patches: kcoti.com/3IXcovQ
Need a Tek-Lok? Get them here: kcoti.com/2MaMxqJ
The availability of custom and sprint run knives are often limited to stock on hand. Check our website for the latest availability and prices.
#NewKnives #KnifeCenter
Social Links:
/ knifecenter
/ knifecenter
/ knifecenter
Sign up for our newsletter:
kcoti.com/2LkuXg7
Check out our KnifeREWARDS program for free money to spend on your next knife: kcoti.com/knifeREWARDS
Browse our full catalog:
kcoti.com/KnifeCenter

Пікірлер: 125

@whoc4r3s117 2 ай бұрын

Thomas needs a raise. Edits everything B roll names on screen. Without him felt like a hostage film.

@ASMR-soothingsounds 2 ай бұрын

"hostage film" 🤣🤣🤣

@addytuney2028 2 ай бұрын

It just feels better with Thomas around. Hope you had a nice vacation.

@Huey4214 2 ай бұрын

That Bear and sons boning knife in the black and white handle is a real home run!

@BluestedSRT4 2 ай бұрын

Scan the table for XL folders, got excited and jumped ahead to the Terzuola, heard the price and jumped back to the CJRB Prado.

@brianleslie7388 2 ай бұрын

With you, man. I would feel bad about losing / breaking a blade that had a cost that much. ( not a collector, just a guy that carries, but loves a better than average piece.)

@OreoDave 2 ай бұрын

Welcome back Thomas! You were missed. 👍👍

@petebec 2 ай бұрын

You missed the most important details about the Prado. That long, wide blade is only 0.09" in thickness, which also contributes to its overall " thinness" and low weight. That's thinner than a Bugout on a 3.75" blade! Impressive!

@youcaillou 2 ай бұрын

This might be a Taggedout killer!

@happykt 2 ай бұрын

I love that Reate and its already sold out everywhere (the one DCA showed). The other colors are in stock.

@JosephOlson-ui2pg 2 ай бұрын

I liked the one DCA showed, but I nabbed the orange n satin. I was glad there were different ones! I love Deadbolt because it's button lock like and in the pivot, but only the CRKT Exclusive comes in without D2 which I avoid. Nitro V is actually desirable and it's high time I got an orange folder. Good episode this week

@timtitus2532 2 ай бұрын

Welcome back, Thomas. Really missed the banter.

@Bearded_Ham75 2 ай бұрын

I really like the blade on that CJRB Prado, I hope they come out with a premium version eventually

@acid6urns 2 ай бұрын

yes an s90v prado would be awesome, i feel like if it’s popular they may do one

@NZComfort 2 ай бұрын

Maaaaaaaan… I’m still waiting for the Condor Bushscot! I watch every week hoping to see it sitting on the table! I’m so down for a pre-order. Thank you for our favorite time of the week!!!

@The4cp 2 ай бұрын

The PM2 Salt is amazing. Thanks so much for it getting here so quickly! That CRJB is just the right size and a great price.

@jerrypomroy2375 2 ай бұрын

I really like the modern traditionals we’ve been seeing recently. Especially the barlow style. Just can’t bring myself to pay the prices because I don’t baby my knives.

@JosephOlson-ui2pg 2 ай бұрын

Totally relatable!

@FullyAdamatic 2 ай бұрын

My head is really turning for Bear and Sons... hold a special place in my heart for my first balisong too!

@Blackboi-uz7yr 2 ай бұрын

I’m new to knifes but I’m starting to notice that some companies charge x amount of money for a production knife when it seems like you could get something hand made with better materials for around the same price

@TheTarman 2 ай бұрын

There’s a reason Chinese companies are folding most USA ones like they’re freshly-dried laundry these days, and it’s exactly what you described Consumers want quality materials and good QC for the best price possible, and not only are USA companies not offering that in most cases, many are actually deliberately up-charging their products to insane levels while pandering to knife Fudds who think anything stamped with an American Flag is inherently superior. It’s a giant marketing scam to get dim-witted people to accept less for more, and it’s why these USA-made companies are going to start suffering long-term, since they aren’t even attempting to meet the foreign competition in terms of materials and equivalent pricing Hell, some USA companies will use Chinese OEMs and still try to charge prices as though they were fully-made in the USA (*cough* Jack Wolf *cough*), which only further solidifies the desires of most consumers to just ignore country of origin with these blades and just look at testing/reviews

@JosephOlson-ui2pg 2 ай бұрын

Precisely the point. You can be a cool kid n have what many want, pay for that and live with it or get something more .... I guess meaningful

@campuscolt65 2 ай бұрын

Yes on the handmade no on the better materials generally the small shop style knives are older steel’s that are easier to work. Many of the new super steels require a lot of machining and expensive equipment to manufacture. The custom knife makers who use those kind of steels usually charge multiple times more than the production knives

@rustleshackleford1553 2 ай бұрын

98.95, I'll finish watching the episode, then I'm ordering that boning knife! Just because I already have four, doesn't mean I need a fifth one any the less.

@peterselby3130 2 ай бұрын

Nice to have you back.

@DanielChzBurger7 2 ай бұрын

To anyone who has no experience with Nicholas Nichols Knives, we’ll worth the money in my experience. I one 3 of his knives, 2 folders, 1 chef knife, all used frequently, and the folders have their quirks but I still love them over many other edc knives I use.

@barrykarpowich731 2 ай бұрын

Prada really nice super deal😊

@alanlarsen3525 2 ай бұрын

I just ordered the farmer x in black alox. You should show it off sometime, it needs a video for the store page. THX DCA, welcome back Thomas.

@ronfry5851 2 ай бұрын

Ooh ooh Mr Carter Mr Carter welcome back😂

@marcg.3830 2 ай бұрын

Benchmade shootout or Guardin Tactical recon 35, I mean it’s a question that answers itself! Benchmade is crazy with that price with grivory handles.

@MrParticular-pu7qh 2 ай бұрын

Welcome back Thomas you were missed The channel Wasn't the same My eyes were very pleased to be able to see all the knives on the table Hope you had a great vacation.

@austinbridge 2 ай бұрын

I would say that the main bullet point of dendritic cobalt is that it literally cannot rust because it does not contain iron...

@larrylacostjr.2075 2 ай бұрын

Welcome back, Thomas!

@carlstanland5333 2 ай бұрын

The copper Reate Pl-xt still shows Preorder on the website.

@happykt 2 ай бұрын

Welcome back Thomas! And I hope someone from KC is cross training with Thomas so you aren't left flat footed with your audio/video when he takes a vacation.

@cameronduncan7921 2 ай бұрын

Benchmade rocks. Seems like they prioritize ambidexterity in their designs. All the companies making crossbar lock knives without reversible clips getting left in the dust by one of the industry leaders.

@cwsmith17 2 ай бұрын

Great new knives video, thanks DCA!

@connorw1494 2 ай бұрын

Love you guys!

@dayontapout 2 ай бұрын

Welcome back Thomas!!

@megacab 2 ай бұрын

I really like that reate, the copper version is slick.

@lyndonmarquis414 2 ай бұрын

The Bear & Son pro-chopper is a good looking knife…

@BuckScrotumn 2 ай бұрын

First affordable OTF I’ve ever seen. Might have to finally get me one.

@pretentiousname01 2 ай бұрын

My carry habits drastically changed to Otfs since my first time carrying one. My first was a lightning, so only like 40$. Then I also got a kershaw livewire and axial shift. Check them out

@FleetOfFog 2 ай бұрын

If you don't mind Chinese made OTFs, Maxace has the Medusa in Magnacit in stock for $238.

@campuscolt65 2 ай бұрын

Cobra tech makes very nice USA made knives Iv never had issues out of mine

@rhubarbrhino 2 ай бұрын

Question! Most expensive antique knife you’ve held, not seen, held. What was it worth? Hopefully you have a photo to add for the show!

@joeyho5134 2 ай бұрын

Welcome back, Thomas. 👍

@clintwestwood3539 2 ай бұрын

Kladić does some impressive Serbian style kitchen knives in AEBL at 62hrc. Love Serbian cleavers.

@Jstarr918 2 ай бұрын

Welcome back Thomas !

@cooperclarke154 2 ай бұрын

Was hoping to see the other DCA tango blade shapes

@knifecenter 2 ай бұрын

soon

@ronfry5851 2 ай бұрын

Hopefully they put some of that new PVD coating on the blade so it's totally resilient to everything❤

@scotthumphrey99 2 ай бұрын

When will the satin paramilitary 2 salt be released?

@rogerdowell4387 2 ай бұрын

Eagle Rock 🤤

@warwicksworkshop9511 2 ай бұрын

Yay Thomas is back! And yay, that Spyderco is sick.

@lxixg9 2 ай бұрын

Do you know when the Buck alpha elite knives will be available and can the handle scales be switched with the select? I want the visibility of the orange with the Magnacut steel

@satoapendragon1257 2 ай бұрын

Use the heel of a victorinox 6inch boning knife with a palm strike works great for cutting chicken bones. I'd be tempted to try the meat cleaver range from benchmade as a butcher. But that price with currency conversion just makes it hard to take a punt on it.

@armenarakelian9876 2 ай бұрын

Why is the Reate PL XT discontinued on the site? I went to order the copper pvd version and the website says discontinued, but it was never in stock? What’s going on I need it 😭

@Robert_Thomas832 2 ай бұрын

Gunslinger Jack 🐺 you've been fleeced as usual. Otherwise fun as normal, nice 🙂

@tmutant 2 ай бұрын

Welcome back, Thomas! The things they said about you when you were gone...

@knifecenter 2 ай бұрын

Can't be any worse than what they say in front of me :) --Thomas

@millionairejh 2 ай бұрын

the bear and sons chopping knife reminds me of the benchmade station knife. it just has that extra angle at the tip that makes it uglier in my opinion. but its only 105 compared to benchamde 400.

@MichaelPorterfield 2 ай бұрын

Always love the new knives of the week!!! I have a question please, I want to purchase a Spyderco knife for under $100. This will be my first purchase of a Spyderco knife. What would you recommend? Thanks in advance.

@toma1460 2 ай бұрын

I'm looking for a modern style locking convex knife for $100 or less. Any suggestions or comments? Thanks

@Woolsocks 2 ай бұрын

I like the smaller meat crafter, it’ll be a ton more useful for a lot of things, and it steers away from every recent benchmade by being one of the cheapest knives they sell.

@HonestArcher_13 2 ай бұрын

When do I get my "Magnacut Manix2 "!!!

@Lurifaks707 2 ай бұрын

Why is the salt pm2 black koated aaah

@Nightwolf866 2 ай бұрын

Hi Thomas

@lightw8johnny 2 ай бұрын

DCA with the Professor intro?! Nothing better ever

@lightw8johnny 2 ай бұрын

Feel like Thomas should be telling us to bite his shiny metal....

@billvan5219 2 ай бұрын

Yo! Thomas!

@Smclaugh08 2 ай бұрын

will we see a blacked para 3 salt

@iamgroot4080 2 ай бұрын

Thomas is better than all of those knives combined

@AlkalineTommy 2 ай бұрын

Welcome back man who shares the same name as myself!

@turdferguson2874 2 ай бұрын

Hurts so abd to find out the thumb nail knife is that much. Dang giod looking knife

@twiceborn_by_grace 2 ай бұрын

Terravantium sounds like a metal that Marvel made up. 🤣

@ManOfEthnicity 2 ай бұрын

I'm surprised the salt PM2 is so reasonably priced, too bad I"m left handed, womp womp.

@CurrentlyOnLV-426 2 ай бұрын

I see Benchmade is still out of they mind.

@DroogyT 2 ай бұрын

I think in this case, David, it's "giant mouses"

@knifecenter 2 ай бұрын

I think I'm gonna stick with GiantMeese from now on -DCA

@einundsiebenziger5488 2 ай бұрын

What's the purpose of the knife in the thumbnail that looks like a straight razor with a broken blade?

@ronfry5851 2 ай бұрын

Which means it'll be even less tough because they don't heat treat their magnet cut for pretty much any other steals to its full potential although they are totally awesome they just won't go that extra 3% and give us some good heat treat Dca, say something to them😢

@deadISgawd 2 ай бұрын

and we are back. lets stick to the formula from now on how about it knife center? if it aint broke ..

@CharlieJulietSierra 2 ай бұрын

David C Anderson is a killer name for you tube

@marktheboss6441 2 ай бұрын

Whenever there's a new release of a magna-cut version of a knife I already own, I feel the resale value of my original models plummeting.

@JosephOlson-ui2pg 2 ай бұрын

Good point. Just remember a steel by any other name may be just the same. Blade geometry matters the most, alloy and thermal cycles add alot and you don't always get what you want, but what the production companies want to sell you. Hopefully you get something in the compromises.

@porksword4 2 ай бұрын

That Ti version of the jw gunslinger is awful if you wanna carry it on your pocket it's checkered under the clip mines going back went for the purple like on here an love it soooo much just avoid the Ti one dudes

@charlesgore8428 2 ай бұрын

Go ahead and say it's a bug out killer

@valeriypykhalenko3113 2 ай бұрын

👍👌

@christopherr1711 2 ай бұрын

No wonder all these Chinese made knives are flying off the shelves 😂

@johnj.baranski6553 2 ай бұрын

Yep, just like in the South in 1860s.. people like stuff made by slaves.

@stephenbarabas6286 2 ай бұрын

@@johnj.baranski6553🙄 yeah.. the same way people like paying for overpriced USA crap so someone can make 75 an hour. Some of us older people know that USA made didn't used to mean rip off prices... Give it a rest

@michaeltrombino3888 2 ай бұрын

WTF with some of the Benchmade prices. I loved and still love the first axis lock, but nowadays there is no way I could consider buying another Benchmade knife. They are of excellent quality, but with the choices of knives, today, they are losing alot of customers. Their prices are outrageous! 😢

@JosephOlson-ui2pg 2 ай бұрын

They have normal business troubles. Trying to get us to buy and buy into what they want is them depending on marketing which costs so much they can't compete on price or have value for money

@michaeldeiters2723 2 ай бұрын

hard to get anything good under 200 thats not an import

@TovarichSputnik 2 ай бұрын

There's no such thing as a reverse tanto. If it has a belly it's a spey blade; if it's straight it's a coping blade. Prove me wrong! 🤯

@ronfry5851 2 ай бұрын

Oh ,DCA, please get some work tough gear, nymph nymph, did I say nymph in Love you thank you thank you thank you thank you😂

@binky8501 2 ай бұрын

Sorry but that's not a $600 knife not close

@eskee1 2 ай бұрын

The best time for knives was rught before covid during lockdowns and right after now its all just regurgitated ideas and stuff thats just way too funky to even be functional or something so ornate using it for its intended purpose would just be crapping all over the knife makers art. G and G hawk deadlock is the pinnacle of all that and came out around that time btw, total grail knife that wont make people think your just stupid for spending that much on something made well...

@davidhelka8929 2 ай бұрын

Giant mice your better Then that DCA 😆

@jbeers1234 2 ай бұрын

Damnit, I was really hoping Thomas was at a hand spa this whole time. 🤢🤮

@cameronduncan7921 Ай бұрын

Can you imagine if Benchmade made that jack wolf and charged $300. People would lose it in the comments. But Jack Wolf charges $350 for a knife made in China and people don’t care. 😂😂😂😂😂

@f1nch_13 2 ай бұрын

Not as think as you drunk i am?

@jeffhicks8428 2 ай бұрын

so call "very thin" knife was monstrously overbuilt just like every other edc bro knife in the world. they call cut like shit and cant cut at all without a keen edge because they all have the geometry of an axe.

@Mr-kn6uk 2 ай бұрын

You tell us all about the prices but you dont tell us all about the price of benchmade. Is this because you know they are ripping people off day in day out?? This happens a lot on your vids when you hit the benchmade crap you never talk about cost. If you do have the benchmade crap on ya table do you think you could bring yourself to tell us all the price in future? I think not!! Buy a Spyderco over benchmade any day. benchmade is a byword for Im guna suck as much $$$s out of are customers as possible!!

@davidgarrett5671 2 ай бұрын

He said the price for both of the Benchmades, was there a problem with your audio?

@kevinmosto 2 ай бұрын

First comment

@MrMcGlinchey 2 ай бұрын

am i the only one that thinks spyderco knives are ugly sorry if they are your favourite they are just not for me

@campuscolt65 2 ай бұрын

I used to feel the same way but I purchased one and it grew on me and the practicality one me over

@loosieclocker 2 ай бұрын

Complaining about American made knife prices? Might want to check your priorities. A well made tool will last. We’re all to comfortable with disposable crap. Support American businesses

@jeffwhitehead7990 2 ай бұрын

“well made” and affordable are not mutually exclusive.

@TheTarman 2 ай бұрын

Fanboys like you are the exact reason American companies keep trying to pull fast ones on the consumer while still acting high and mighty about their products Nearly every big-name Chinese knife company working with premium materials will match USA-made knives these days, if not surpass their QC and materials, for less money The myth that “USA-made” is some inherent stamp of quality has been long-disproven, and it’s your mindset that allows them to keep making worse products to ensure they’ll fall behind the foreign competition. These companies don’t benefit long-term from people like you. They suffer, because normal people want quality products for affordable prices, not American-flag-stamped crap that costs 300% more than it should just because you’re buying a warranty you wouldn’t need nearly as badly if the products were made as good as fanboys and the companies claim they are

@stephenbarabas6286 2 ай бұрын

🙄 yeah... Another one that USA made HAS to mean overpriced Justify it how you want but people don't believe that crap anymore... Funny how "USA made" is mostly USA assembly with foreign parts... Buy all that overpriced crap you can and the rest of us will sit back and laugh at you trying to explain how "it's worth it"

@stephenbarabas6286 2 ай бұрын

I guess my comment got deleted by the haters.

@ayuanf 2 ай бұрын

同意

@Aaron-pf7eh 2 ай бұрын

Best knife for scout/ appendix carry on the belt ? Comments help me out nothing too big but good enough for a solid grip

@theoneandonlysoslappy 2 ай бұрын

We've seen a few new pivot-type locks recently and I'm wondering if they are just Paul Locks with a new name (a la Axis Locks). Anyone know? Do you know, KnifeCenter?

@ben9and1-3rd 2 ай бұрын

I've had a Gerber Paul 2P for a very long time and was kinda wondering the same. 👍🍻

@JosephOlson-ui2pg 2 ай бұрын

Interesting thread to have picked up!

@knifecenter 2 ай бұрын

They are functionally different than Paul Locks. On a Paul, you have to depress the pivot/button to open the blade. These operate more like a typical button lock that just happens to share space with the pivot. -DCA

@theoneandonlysoslappy 2 ай бұрын

@@knifecenter Thanks, David!

@ChunkyPuke4me 2 ай бұрын

I pause the intro to view all that's on the table, then I ffwd to the fixed blades (if there are any 🙄). Folders, flippers, OTFs and all non-fixed blades are for pampered users. If opening boxes is the height of your need for a blade, you might not understand just how pampered you are. If not, by the time you do realize, it'll be way too late.😂