New Leveling Feet

Рет қаралды 3,139

3 жыл бұрын

This video is the fabrication of a set of leveling feet that I have built for my new scaffold.
Cam at Battler / @camatbattler2233
For channel sticker swaps and information about my Precision Ground Flat Stones email me; sharkrivermachine@gmail.com
To purchase Precision Ground Flat Stones in the USA visit my Etsy Store.
sharkrivermachine.etsy.com

Пікірлер: 44

@hilltopmachineworks2131 3 жыл бұрын

I agree. Scaffolding is much better than ladders when there is a bunch to do.

@sharkrivermachine 3 жыл бұрын

You can say that again. I ended up the a hospital trauma unit from a ladder kicking out from under me. Thanks for watching and commenting.

@dannywilsher4165 3 жыл бұрын

Big foot sighting.. Feet... Squatch? Looking good. Thanks Mr. Steve!!

@sharkrivermachine 3 жыл бұрын

Wish I had thought about that. May have gone viral. Thanks for watching and commenting.

@AmateurRedneckWorkshop 3 жыл бұрын

Looking good there Steven. Keep on keeping on.

@sharkrivermachine 3 жыл бұрын

Thanks for watching and commenting

@JamesP_TheShedShop 3 жыл бұрын

I am so glad I found your channel

@sharkrivermachine 3 жыл бұрын

Thank you for watching and commenting. Be sure to subscribe to my channel if you have not already done so.

@donaldnaymon3270 3 жыл бұрын

Great video. Nice work. Thank you for sharing.

@sharkrivermachine 3 жыл бұрын

Thanks for watching and commenting

@TheMiniMachineShop 3 жыл бұрын

Heard you mention making gears that was the most fun thing I did in the shop!!

@sharkrivermachine 3 жыл бұрын

I am thinking about making some gears for my lathe. Just have not had the opportunity or reason to do it so far. Thanks for watching and commenting.

@tced2858 3 жыл бұрын

Good fab job Steve...they came out great !

@sharkrivermachine 3 жыл бұрын

Thank you for watching and commenting. Please subscribe to my channel if you have not already done so.

@TheKnacklersWorkshop 3 жыл бұрын

Hello Steve, An interesting video... I like the secret welding table, a very good use of space... Take care. Paul,,

@sharkrivermachine 3 жыл бұрын

Glad you enjoyed it, the table works out great. Thanks for watching and commenting.

@craigtate5930 3 жыл бұрын

Nice n simple. I I always have to be in just the right mood to break out the welder for a project..lol

@sharkrivermachine 3 жыл бұрын

Thanks for watching and commenting!

@andrewevans1658 3 жыл бұрын

Nice project Steve!

@sharkrivermachine 3 жыл бұрын

Thanks for your continued support.

@robertdebusk6157 3 жыл бұрын

Those are some of the nicest scaffold feet I have seen in a long time. Most are to thin, and barely welded, so they come apart in short order. I would imagine those will outlast both of us. Thanks for sharing an enjoyable video. See you on the next one. Take Care and Stay Safe. Bob

@sharkrivermachine 3 жыл бұрын

Glad you like them! Thank you for watching and commenting. Be sure to subscribe to my channel if you have not already done so.

@ThisGuyAudit 2 жыл бұрын

good stuff..thanks

@sharkrivermachine 2 жыл бұрын

Thanks for watching and commenting.

@AaronEngineering 3 жыл бұрын

G’day Steve. I know the feeling mate. I’ve never cut gears ⚙️ also. I started out as a motor mechanic and then switched to engineering 10 years later. I’ll be watching your progress with keen interest. BTW, we need to swap stickers mate. I think we spoke about it but forgot to follow up. Cheers 🍻. Aaron

@sharkrivermachine 3 жыл бұрын

Send a email to me with your address; sharkrivermachine@gmail.com I will get them out to you. I can't really put my finger on it but those of us from the automotive industry take a little different approach to problem solving. Thanks for watching and commenting.

@AaronEngineering 3 жыл бұрын

@@sharkrivermachine G’day Steven. I sent you an email with all my details. It’s from my Hotmail account, so please check your junk folder in case it went there. Cheers Aaron

@angelramos-2005 3 жыл бұрын

Very nicely done,Steve.Thank you.

@sharkrivermachine 3 жыл бұрын

Glad you enjoyed it, thanks for Watching and commenting.

@AWDJRforYouTube 3 жыл бұрын

Nice job Steve. Really like the welding bench /table top very practical in our small shops.👍👍👍

@sharkrivermachine 3 жыл бұрын

The welding bench has worked out very well. Here is a video on the building of the bench if you are interested. kzfaq.info/get/bejne/nbR_jdFk19quaJc.html Thanks for watching and commenting.

@howder1951 3 жыл бұрын

Nice little project Steve, simple and utilitarian, nothing like a rock solid scaffold to enhance the project. Enjoyed the vid, cheers.

@sharkrivermachine 3 жыл бұрын

My thoughts exactly. Thanks for watching and commenting.

@compassprecision 3 жыл бұрын

Nice work! The new leveling looks great.

@sharkrivermachine 3 жыл бұрын

Thanks for watching and commenting.

@metalworksmachineshop 3 жыл бұрын

The plate should be laying down in the saw. Always cut with the most metal engaged on the blade. Helps the life of the blade. Unless the vise doesn't open that far. There's no right or wrong, just blade life. Nice little project 👌. Where did you get the mig gun holder?

@sharkrivermachine 3 жыл бұрын

Tried it first that way. The blade guide will not clear the vise in that configuration. Thanks for watching and commenting.

@edstimator1 8 ай бұрын

I didn't know that about the engagement thing. I don't own a metal bandsaw either though soo...