New Maxpeedingrods Coilover - Better Built Than Before? Will They Last?
Рет қаралды 58,219
Күн бұрынPurchase Maxpeedingrods parts in the link below!
www.maxpeedingrods.com?tracking=58deec5d-3b72-49e7-bfe2-aae52bcbb8af
Use Coupon code "GBH" and receive 5% discount on all orders.
Headlight Duct found here - www.efbmotorsports.com/
Buddy Club Wheels -jhpusa.com/search?q=buddy+clu...
Momo Steering Wheel - jhpusa.com/search?q=momo+stee...
NRG Hub - jhpusa.com/search?q=NRG+Hub&t...
Stainless Brake Lines - jhpusa.com/products/stoptech-...
Wheel Bearings I'm using - amzn.to/2RjiHn4
Cameras used in this video
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFFT
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ garagebuilthondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas."
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support!
@ef_danielsan 2 жыл бұрын
John I got so fat in the last year my EF Forever shirts dont fit anymore. lol
@GarageBuiltHondas 2 жыл бұрын
Lmao! 🤣
@Busydadgarage717 2 жыл бұрын
Same boat, homie! Same boat!
@curtisbeef 2 жыл бұрын
Try opening up those old max peeding rods to inspect them. Sometimes the nut on the end of the shaft inside comes off. Might be a easy fix and would be interesting to know how it failed.
@frasertinman7080 2 жыл бұрын
Oh shit that reminds me of a time doing a front shock change. Cant remember what it was on but as I undid the top mount which is just a top hat so single nut in the middle. The shaft unscrewed internally and I'd already loosed off the bottom bolts. What a bang and fright you get as it jack knifed the shock and spring towards my nuts. Luckily not more than a hard slap to my leg but aye scary times
@deohasslehoff956 2 жыл бұрын
I have them on my rsx. Well i have 1/2 the set installed. These work great i definitely recommend these coilovers
@GarageBuiltHondas 2 жыл бұрын
👍
@Vansokc1990 2 жыл бұрын
just what i been waiting for! for someone to test the new ones out.
@GarageBuiltHondas 2 жыл бұрын
👍
@802Garage 2 жыл бұрын
Nice overview! Seems like they are likely improved, but won't give you the true custom fit of far more expensive coilovers of course. I also hate 15mm nuts!
@fabiandennis1247 2 жыл бұрын
sick vid..... downshift is on point great cam views
@efbmotorsports2047 2 жыл бұрын
Been happy with my set once I got the replacement shock. Although Ill definitely be getting something higher end for my next set.
@omarq1414 2 жыл бұрын
Great Video and review. Your last video with the adjustable Orange and black Coil overs on your CRX made be buy a set. I paid less than 200$ during a sale. I do not care for how bumpy the ride became. Stance looked fine. You were right about them being a budget starter set to get to know your car, which they did. I think next I will get a set that has better ride quality. Thanks Again for the vids
@GarageBuiltHondas 2 жыл бұрын
Thanks for watching and commenting!
@grantgibson9611 2 жыл бұрын
I bought a set of the orange adjustable dampening for my 91’ integra. Same issue with the front not going low enough. Great budget suspension but very bumpy still yet. Best content on KZfaq hands down btw!
@mrplankton8308 2 жыл бұрын
How is it holding up now?
@Beezy_Builds 2 жыл бұрын
I installed and reviewed a orange set for my channel aswell, I thought they were a great daily budget coilover but very soft with the stock spring ratess, the updated versions do look promising
@GarageBuiltHondas 2 жыл бұрын
Let's hope for the best
@MooreProjects 2 жыл бұрын
Great review and install as always Jon! MaXpeedingrods has been hooking me up with some parts recently also for my YT channel. I have an EF, DC2, and a RD1 so I might try to get a set one day in the future for one of them
@GarageBuiltHondas 2 жыл бұрын
Nice, might as well try them out! 👍
@bseries8826 2 жыл бұрын
Thanks for the review. Possibly looking to get a set for my EG.
@GarageBuiltHondas 2 жыл бұрын
👍
@Busydadgarage717 2 жыл бұрын
Hey Jon, Great video as always! Solid review of the coilovers! Being honest, I think I am going to step up to the next level of coilovers when it is time! Totally agree that having to modify these to get proper ride height just kinda takes them down a notch! Excited to hear you may be getting more serious about the CRX. Very curious how a good intake manifold, cams and tune will positively effect your times!
@GarageBuiltHondas 2 жыл бұрын
You should, you'll appreciate it from the beginning. Definitely want more mods,.let's see what I can get in the next 3-6 months.
@T-Ray-AllDay 2 жыл бұрын
@@GarageBuiltHondas I’ve checked but haven’t found this.. have you ever tried ITB’s on any of your track set ups? I think it would be fun with a tune, cam and small head work?
@GarageBuiltHondas 2 жыл бұрын
I haven't, but definitely would love to of the opportunity arose.
@Matchlessoriginal 2 жыл бұрын
Great review! Thanks for the info 😃
@GarageBuiltHondas 2 жыл бұрын
👍
@juniorroman6038 2 жыл бұрын
Good video and information 🤙🏽
@TURBOTRISTO 2 жыл бұрын
I had these new gen on my channel a month ago in an ek they were fine I also tracked them hard out for an entire day no issue, my latest video I fitted them on an ef and they didn’t lower the car at all
@GarageBuiltHondas 2 жыл бұрын
I saw. Hope they make EF specific ones eventually.
@TURBOTRISTO 2 жыл бұрын
@@GarageBuiltHondas I hope so mate, I sent them a lot of data so hopefully they fix it they listened last time I dynoed their old shocks
@Maplecook 2 жыл бұрын
Watching you work that reciprocating saw, gives me the willies. haha I have a phobia around machines. As a guy who does his own wrenching, this has been a problem for me in the past...
@GarageBuiltHondas 2 жыл бұрын
Lol
@micaiahflores1592 2 жыл бұрын
i have the OG orange boi set on my 96 corolla and i think one of them is blown my top bushing is toast and i get clunks on speed bumps only on the driver side i might spend the money for some FA500s or BCs as they are the only brands for my 96well and XPR but i think i'm done with budget coils THANK YOU FOR THE DROP AND CHUCK TESSSTTTT
@victorbernabe4294 2 жыл бұрын
Maxspeeding rods would have to redesign the pillow ball area to retain the shock travel .......id prob end up using the MPC lowering shock forks on the front suspension to get more adjustment out of the coilover package. Great video content as usual
@victorbernabe4294 2 жыл бұрын
Or maxspeeding rods will prob go with an over all shorter shock package for the ef chassis as honda and other suspension manufactures have before them.
@GarageBuiltHondas 2 жыл бұрын
Both solid points. The forks would amend that situation easily. But that'd require buying them.. lol. Hopefully they build a shorter shock for the EF chassis.
@djmandrick 2 жыл бұрын
This was a really insightful and honest overview. i remember commenting back when you put the 2nd set in it would be inteeresting from a longevity POV. Great follow up. Loved the track stuff too. Congrats on the podium and on these budget coils, lets all agree these are the same level as suspension found on cheap mountain bikes and there's nothing wrong with that. But evcen so that set failed one in less than 600 miles? I'd just view these as pure aesthetics (not in your case tho it seems!) at the cost of ride quality and longevity of the parts and not a performance part at all (as they stand). If you get performance from your application consider it a bionus. I'd be looking to get a reputable brand for a bit more as once again it's mostly proven, buy cheap, buy twice.
@GarageBuiltHondas 2 жыл бұрын
Agree!
@djmandrick 2 жыл бұрын
@@GarageBuiltHondas phew! Just while im here been following you for a few years but don't comment much. Finaly bought an ep3 in the Summer but still lvoe your channel and your track outings. Im very jelly about your garage!
@GarageBuiltHondas 2 жыл бұрын
Thanks so much! An ep3 is always a car I've wanted. Not sure I'll get to own one but I've secretly always loved the body style of those.
@trev6783 Жыл бұрын
Likely you need to have the mcpherson style struts to have the chamber adjustment on the strut tower. If you have upper ball joints like older hondas, then your camber adjustment would be on special aftermarket upper ball joint set up..
@fate404 2 жыл бұрын
nice thorough review
@GarageBuiltHondas 2 жыл бұрын
👍
@marcovillalpando1672 2 жыл бұрын
I love their coilovers
@CameronsCars 2 жыл бұрын
Really? What do you love about them?
@scottyrivers6973 7 ай бұрын
Great footage
@JakeDeSilva1 2 жыл бұрын
Great review!
@GarageBuiltHondas 2 жыл бұрын
Thanks!
@cruz_control3925 2 жыл бұрын
Congrats on the podium Jon! These updated coils look nice, but I'm skeptical about the spherical bushing in the front. Cheaper quality spherical bushings tend to wear quickly and introduce play into the front end over time.. We will see over the long-term how they hold up.. good honest review!
@GarageBuiltHondas 2 жыл бұрын
Agreed. We'll see where these go
@estewar03 2 жыл бұрын
@@GarageBuiltHondas I saw DBG install his & he seems like like them enough but he also didn't seem to experience the same height issues (or didn't mention them), but I think they'll go "IN THE BIN" thanks Marty..... I agree with your assessment Jon, may as well spend the extra $100+ and at least get some Tein coilovers, honestly for a budget set up you really can't beat the good old Koni adjustable & Ground Controls coils.
@Diimelo_David 2 жыл бұрын
Thanks this help a lot
@GarageBuiltHondas 2 жыл бұрын
👍
@TrackSol 2 жыл бұрын
Honda uses JIS spec metric hardware which have a lightly smaller head than regular metric fasteners.
@manuellopezej1 2 жыл бұрын
They look great im sure they will be better then the first design
@GarageBuiltHondas 2 жыл бұрын
Let's hope
@hondaland_ 2 жыл бұрын
I agree. No more universal setups
@5eZa Жыл бұрын
i like watching you slam that sawzall blade on the table due to weirdly pushing down on it as if it's not about to slam down when you finish the cut. neat!
@GarageBuiltHondas Жыл бұрын
It is what it is. Thanks for your genuine concern.
@hondaland_ 2 жыл бұрын
I have maxpeedingrods with crx forks on my dc teg and it makes it lower. Like a stock drop fork
@victorsgarage5814 2 жыл бұрын
Perfect form on that trash throw
@GarageBuiltHondas 2 жыл бұрын
😆
@frock512 2 жыл бұрын
Same issue I had with the original sets they don’t allow you to drop the same way FF coils do , looks all good then once you raise the car the front wheel drop and hang so low. Once they fix this issue I’ll buy another set for sure
@GarageBuiltHondas 2 жыл бұрын
👍
@The_Redkween 2 жыл бұрын
I’m curious to see if these have better dampening. That’s the main complaint I have with my current 12-way adjustable size: when I hit sharp bumps, my rear ended stutters out from under me.
@GarageBuiltHondas 2 жыл бұрын
I hope so too
@nukesploder 2 жыл бұрын
when you say in 29:25 "there's a handful of other coilovers that have been tested for money in that similar range" what are you referring to? Thanks!
@jviews1 Жыл бұрын
Sadly I cannot buy this brand. Too many reviews on utube say these components die within a year. Comeon manufacture, you cannot make a shock to last. My past shocks lasted 12 years (ok 5 too many), but you get the idea. good video.
@fireinthehole72 2 жыл бұрын
See that ride height looks perfect to me but that jumping up and down when u hit a bump is what I’m afraid of if I drop my car.
@henryhercules309 10 ай бұрын
You probably figured it out by now but usually you have to settle the suspension in. Meaning test drive it for a couple miles. Not sure how much difference it would make but it would have definitely dropped lower.
@coreyfreeman6226 Жыл бұрын
You can also get a shorter spring with the same 8K rating for more adjustability.
@GarageBuiltHondas Жыл бұрын
The only downside to that is you have a great chance to experience coil bind. With these shocks it would probably happen, with a shock of better quality it could help offset that from happening.
@BodVar_Sul 11 ай бұрын
I wonder if they upped the design on the pillow ball mount to help with less friction on the coilover itself when turning 🤔
@circuitsevenautotech7488 2 жыл бұрын
Man they look nice
@GarageBuiltHondas 2 жыл бұрын
They do, let's hope the perform nice too!
@Playermex2 2 жыл бұрын
Omg finally coilovers that have a higher height for my car 😍 #Acura integra
@runespaze 2 жыл бұрын
MPR hasnt let me down honestly...
@GarageBuiltHondas 2 жыл бұрын
I've had good experiences also, except one coil blowing prematurely.
@hondaland_ 2 жыл бұрын
Can't wait to find out the spring rates
@tigris4149a2 2 жыл бұрын
Rates are listed on MXR website
@hondaland_ 2 жыл бұрын
@@tigris4149a2 no need to look. He went over that part in the video. Still weak
@tv-cx8gv Жыл бұрын
Apparently the rear shocks for the Miata have too long a stroke. So once the car is levelled there is almost no rear shock travel left!
@mbailey7701 2 жыл бұрын
Send me a set for a 91 civic si I live in Montana. The winter around here kills these kind of performance suspension. Right now I'm running a Frankenstein set that seem to handle the cold and roads well but it hasn't been below 0 much this year.
@hondaland_ 2 жыл бұрын
Wow they raised prices that high 🤦🤦 not worth it at that price point. Especially if it seems like the coilovers got a revamp on style and not actual performance. If they are going to be that expensive then make model specific versions and correct spring rates for each trim. They can still use the same shocks and get away with it and at least throw correct springs rates for each trim they offer. The spring rates for a crx just don't work well on DC and EG. That's the biggest issue with mine is the soft springs
@SJ-xy3pi 2 жыл бұрын
Great content!! Congrats well done Jon!!! By the way do you have a break line bracket that would work with Koni yellow for sale? If not, do you know where I get a set for the front? Thanks! CONGRATS again!!!
@GarageBuiltHondas 2 жыл бұрын
I don't sorry. Use some zips ties held to the shock absorber. That generally works pretty well.
@Where_we_go 2 жыл бұрын
They added the spring isolator, but didn't take into account what that would do to the minimum height, especially on a "universal" set. Quality might have gotten better, but product research seems to be lacking still.
@GarageBuiltHondas 2 жыл бұрын
They need to make an 88-91 Civic model, hopefully they will.
@MrAlton1991 Жыл бұрын
When you adjust the spring down are you not changing the preload of the spring and putting more of a load on the strut than the spring? Or am I wrong about how that works? Just curious just got a set for my 98 accord. And I actually tightened the springs a few turns to take more of a load off the strut because people have so many problems with them blowing out or just leaking.
@GarageBuiltHondas Жыл бұрын
Correct. Tightening them as you did does add preload so you might be helping the shocks survive a little longer.
@bpsdetailing8822 10 ай бұрын
I had the black and yellow ones and they were decent but very stiff and they make binding noises. The fronts both blew out after about 10k miles of regular driving. I have purchased two sets of the COT6 black and blue coilovers from eBay for a 03-08 Toyota Matrix and the photo shows the correct coilovers but in the box they are the wrong ones and not the same as the photo. The box had a sticker on it that says 03-08 Matrix so I think they made a mistake at the factory or something. Could have been mislabeled somewhere else in the chain I guess but it is really frustrating. I wanted to try them out but I can’t keep driving on the blown coils.
@GlassWerx 2 жыл бұрын
For the jump in price I'd wait a while considering they are now n same price range as other known name brands. Like my air ride better tho. Last pair of maxpeedingrod coilovers I had rode well just didn't ever even put more then 5 miles on them b4 started tearing into the car and bagged it.
@GarageBuiltHondas 2 жыл бұрын
👍
@DrivenFilmsPhotography 2 жыл бұрын
I debated on cutting my cup on my cb7 as well Jon. Just not low enough in the front
@GarageBuiltHondas 2 жыл бұрын
Do it man, it held up to 30 hard driven miles on track. You'll be good!
@DrivenFilmsPhotography 2 жыл бұрын
@@GarageBuiltHondas yea you were killin it on track👍 that b16 vtec from the gopro on the nose gets me everytime lol. Guess when I figure out the wheel setup on the cb7 I'll cut em up to get low enough 🙏🏼 great video fam. Keep it up 🔥
@GarageBuiltHondas 2 жыл бұрын
You need to get a GoPro with an external mic too. Your cars will make waaaaaaay cooler sounds than mine do! 👍
@whatheck6709 2 жыл бұрын
That induction noise is why i love B-series so much
@GarageBuiltHondas 2 жыл бұрын
Sounds so cool!
@hellswindstaff91 2 жыл бұрын
Just bought a set for my 1995 Integra came in yesterday. Just waiting for a good day to install I'm curious to see how they are now..I had a set on my 97 BMW 328 a few years ago and they were horrible after a year of use.
@GarageBuiltHondas 2 жыл бұрын
Hope they perform better for you.
@y0unganddriven 2 жыл бұрын
What dampening setting did you set the front and rears at?
@GarageBuiltHondas 2 жыл бұрын
I start full stiff. Then adjust as I feel needed in between sessions.
@Juicespec 2 жыл бұрын
thank you for your input i have maxpeedingrod coilovers on my crv and i maxed out my fronts and it didnt really lower it much in the front, the rear is a whole nother story im able to tuck the rear not bad for affordability tho
@GarageBuiltHondas 2 жыл бұрын
Thanks for sharing and the info!
@oneofthemnames3050 2 жыл бұрын
Just put extended top hats up front. 👌🏽
@GarageBuiltHondas 2 жыл бұрын
It won't fit. The shaft is a different diameter than OEM.
@Juicespec 2 жыл бұрын
@@oneofthemnames3050 that’s what im thinking I recently got shorter 24k springs to go lower and maybe using mpc drop forks to get extra drop would need to look at the shock rod width and fit a proper extended top hat
@evanbatista8414 Жыл бұрын
Is this with the old set or the new blue ones? I'm looking to get some for my rd1
@lexsanchez8554 2 жыл бұрын
currently am running the front forks of an 96-00 ek on my ef hatch, are these coilovers still compatible to puton my ef? thanks for the great content Jon!
@GarageBuiltHondas 2 жыл бұрын
Yes. They come with the spacers needed to put in the fork.
@lexsanchez8554 2 жыл бұрын
@@GarageBuiltHondas thanks Jon! surely i will buy soon this, i need for daily and track
@GarageBuiltHondas 2 жыл бұрын
👍
@hinsonian 11 ай бұрын
Just got these for my EK and they clunk in the front... it's the top nut BUT I cannot get them to torque down! They just keep spinning. Got one of em somewhat tighter and it stopped clunking, other one won't grab at all. I see you take these apart and ... i guess my strut shaft is just rotating freely? I'm at a loss here. Any advice is v appreciated.
@GarageBuiltHondas 10 ай бұрын
The top nuts on the top hat?
@ChutneyInc. Жыл бұрын
I saw someone re-use the top hat on their previous gen mxpdngrds coilovers
@streetfighters805 2 жыл бұрын
can it be that they make smaller cups for lowering applications.. and the taller ones for a more stock look? I dont think its that big of a deal in essence but its amendable... give the custy both...
@GarageBuiltHondas 2 жыл бұрын
They could, I don't see an issue. Should be an easy redesign also.
@SRMHIPHOP 2 жыл бұрын
Would the higher spring rate cause a difference in ride height?
@BrpdogProductions 2 жыл бұрын
No but it will make the suspension squish less so you'll stay at the set height or close to it when you hit bumps
@Dragonfabb 2 жыл бұрын
I had a lot off miles on a set of original ones. Never had an issues other then being too soft
@GarageBuiltHondas 2 жыл бұрын
👍
@apimpwalkg4539 2 жыл бұрын
When I received my coils one of them was leaking from the bottom of the dust cover, Can I still fix them ?
@GarageBuiltHondas 2 жыл бұрын
I don't believe so. Contact customer service, they should be able to help.
@cedriccope178 2 жыл бұрын
That stance though
@GarageBuiltHondas 2 жыл бұрын
👍
@Deathprevails Жыл бұрын
I just installed some ok my 4 g eclipse gt and I’m getting a clunky noise coming from the passenger side any tips to maybe take care of that issue
@GarageBuiltHondas Жыл бұрын
Double check that everything is tight from the coil to your suspension. Sounds like you missed something
@uses0ap 2 жыл бұрын
The truck on track caught me off guard lmao
@GarageBuiltHondas 2 жыл бұрын
Right
@jonathanbarros9948 Жыл бұрын
any updates bro? i plan on either getting these or bfo ebay coilovers, they're also from MSR but supposedly a higher quality for my 06 accord sedan. it has 160k miles and oem shocks and struts
@GarageBuiltHondas Жыл бұрын
If you're daily driving the car you're golden. These just are suitable for track abuse.
@CesarsCarCorner 2 жыл бұрын
You are the first one to I've seen change out the springs to a better one. By the video, though, they did look a bit too bouncy.
@GarageBuiltHondas 2 жыл бұрын
They need better shocks to be able to handle the rebound better.
@CesarsCarCorner 2 жыл бұрын
@@GarageBuiltHondas It seems like it. Maxpeedingrods coil-overs are for a budget mindset, but in the end, you get what you pay for.
@GarageBuiltHondas 2 жыл бұрын
Exactly
@710pappy 2 жыл бұрын
I know color on a track car is irrelevant but DANG those powder blue springs are beautiful too bad to shelve 😕
@GarageBuiltHondas 2 жыл бұрын
I like them a lot too, the black & blue contrast looks fantastic!
@vastsirik9592 2 жыл бұрын
Congratulations!!!! The alligment its the same ??
@GarageBuiltHondas 2 жыл бұрын
You'll want to get your car aligned after lowering it.
@macmurati 2 жыл бұрын
John be honest, there’s no way you’re getting the most out of your car with these. I’ve had nothing but issues with my set and the company no longer even bothers to reply to my msgs about faulty product. It would take a whole lot of changes for me to ever consider these again.
@GarageBuiltHondas 2 жыл бұрын
Sorry to hear man.
@joelhall3646 2 жыл бұрын
@@GarageBuiltHondas Seriously, these are junk. You really need to look I to how to modify and revalve Bilstein shocks. These are not performance shocks or spring and intended solely for a cheap adjustable drop.
@rtroeun 2 жыл бұрын
You have a cool voice!!
@GarageBuiltHondas 2 жыл бұрын
Lol, well thank you! 😁
@allana5930 2 жыл бұрын
Well I'm patiently waiting for what the out come is to see if there worth it.
@GarageBuiltHondas 2 жыл бұрын
👍
@denismilistenfer3826 Жыл бұрын
@@GarageBuiltHondas so are they worth it after time comparing to orange ones ?
@GarageBuiltHondas Жыл бұрын
Not for the EFs, but all the other models they'll work fine.
@denismilistenfer3826 Жыл бұрын
@@GarageBuiltHondas ef?
@GarageBuiltHondas Жыл бұрын
88-91 Civic/CRX, also known as the EF models when talking about cars.
@SIRICKO 2 жыл бұрын
I still haven't install my gold ones on my rex yet. lol
@GarageBuiltHondas 2 жыл бұрын
👍
@LosDaGhost973 9 ай бұрын
How these cot6 hold up? Buying some for my g35x
@GarageBuiltHondas 9 ай бұрын
For track use so far so good. I have never daily driven them though.
@throughmyeyesmedia6492 2 жыл бұрын
I knew you were going to throw them nuts in the trash! Lol 😂 honda size bolts only.
@GarageBuiltHondas 2 жыл бұрын
😆
@robinc9126 2 жыл бұрын
Did the old set of maxspeedingrods coilovers sit that high out of the box as well?
@GarageBuiltHondas 2 жыл бұрын
They did. I had to lower from the perches, not the cup.
@Lost10mm. 8 ай бұрын
How are they after a year
@autotrimmers6353 Жыл бұрын
So compared to the older model of bouncy coilovers you’d say these are good for daily driving?
@GarageBuiltHondas Жыл бұрын
For any model except an 88-91 Civic/CRX
@tylerneisinger206 2 жыл бұрын
For the love of god, please lol, im doing a b swap in my ef hatch. Hubs are the last part. When people say to use dx/si knuckle's, do they mean from an ef/eg/ek? Or only an ef? Not sure if you know where i can get some online or what. I live in seattle and work at pick n pull, so i have access to alot of deals, but we dont get anyyy ef's):. SOMEONE PLEASE HELP):
@GarageBuiltHondas 2 жыл бұрын
EF knuckles are best, for the 🚟 geometry stays the same. But DA work fine also as long as an alignment is performed after install.
@tylerneisinger206 2 жыл бұрын
@@GarageBuiltHondas okay ill grab some from a da. Thank you bro.
@lostlilsol 2 жыл бұрын
Can you order the new coilovers with custom spring rates?
@GarageBuiltHondas 2 жыл бұрын
Yes, but you need to contact customer service first.
@adenaudain5857 Жыл бұрын
Is the new ones good Iam going to buy this for my Nissan n16
@GarageBuiltHondas Жыл бұрын
The newest offering is supposed to be the best yet.
@schalachi Жыл бұрын
is theere anyway to swap the dust boot and out longer one? I have the old type
@GarageBuiltHondas Жыл бұрын
You should be able to remove both and try to fit it.
@schalachi Жыл бұрын
@@GarageBuiltHondas thanks
@ridazach53 2 жыл бұрын
Is it possible the shocks started leaking because they arent ment for the higher spring rate? And maybe rhats why your other set hasnt had issue yet with stock springs?
@GarageBuiltHondas 2 жыл бұрын
I've never read of rates affecting the shock life. I'd think at least 2 would be done then since they all withstood the same abuse. I think it's just quality control, they need to continuously building a shock that superior to previous ones they've built.
@ridazach53 2 жыл бұрын
@@GarageBuiltHondas usually if you replace springs on shocks that arent rated for them your at risk of blowing them. I figured its the same for coil overs.....cheap ones anyways lol i could be wrong just thoughts. Im about to thow a set on a 01 civic. Kinda wish i got stiffer springs incase i run it at the track
@MrReefurcheefur 2 жыл бұрын
Whoa why the shifter looks so loose I’d be scared to grind gears. Congrats
@streetfighters805 2 жыл бұрын
and its a type r trans
@GarageBuiltHondas 2 жыл бұрын
I need new linkage bad.
@AllenSpec 2 жыл бұрын
They look great just sucks you had to modify them to get it lower
@GarageBuiltHondas 2 жыл бұрын
I agree
@thefearonshop 2 жыл бұрын
That stick look like it’s bout to fall out the car cuz 🤣😂
@GarageBuiltHondas 2 жыл бұрын
It got so loose this day. Found out the rear bushing loosened itself up.
@iiNgONYaMa 2 жыл бұрын
How do you add the pillow ball
@GarageBuiltHondas 2 жыл бұрын
The new ones come with it.
@adavidtoremember 2 жыл бұрын
I bought a used G35 and it had these yellow MAXPEEDINGRODS installed on it already and I have no idea how long ago that person installed them but I have only had the car a smidge over a year and the rear coilovers are BUSTED. I'm bouncing all over the god damn place and honestly dislike them very much lol. The front seem to be doing fine though tbh. Again idk how long ago they were put on but a little over a year for me and they were done
@GarageBuiltHondas 2 жыл бұрын
Seem to need some rebuilding of their product to stay relevant. Too many bad instances where the product is having issues.
@NjBoriG35 7 ай бұрын
I didn't receive a brake line kit either
@hondaland_ 2 жыл бұрын
Shorter spring from Swift will lower the shock and car
@p3rformanc3fanatic60 Жыл бұрын
Put them on a shock dyno i bet a stock honda shock performs better
@sepg5084 Жыл бұрын
Maxspeeding rods make better connecting rods than coilovers.
@brianaggson1074 11 ай бұрын
Plot twist: they put them in the box scratched and broken
@GarageBuiltHondas 11 ай бұрын
Hahahaha
@user-nn8he6if6g 8 ай бұрын
All he has to do was harden then spring and it would have made room for the shock to go lower
@craigcarpenter1072 2 жыл бұрын
What tires are you on
@GarageBuiltHondas 2 жыл бұрын
Federal RSRR
@mexkicks 2 жыл бұрын
Hey the code only gives u 5% off and on the discription it says 15%. What’s up with that
@GarageBuiltHondas 2 жыл бұрын
I wrote it wrong. It is actually 5%
@NjBoriG35 7 ай бұрын
I'm having issues with these. The rear plate was sooo huge that it wouldn't bolt on top in the rear..
@GarageBuiltHondas 7 ай бұрын
Have you tried to contact their customer service?
@NjBoriG35 7 ай бұрын
@@GarageBuiltHondas not yet
超人夫妇
Рет қаралды 40 МЛН
Garage Built Hondas
Рет қаралды 155 М.
MaXpeedingRods 24 Way Adjustable Damper Full Coilovers with Camber Plates Review (Scion tC2 / tC2.5)
Derrick Aquino
Рет қаралды 23 М.
Kingofnigte
Рет қаралды 6 МЛН