Omg thank you !!!!!

Thank you. Jesus I was about to uninstall KZfaq 🤣

thank you damnit

Sushi thank you

5:22:59 of shite then?

HOW GOOD IS IT!

Bandit Trucker siting here checking that Datsun out its mint from what I can see

I was just about to say that, looks like my car

the black BMW even nicer

Don't think so as for first application You must have no traces of other or dirt on the car... At least by instructions and what dealers have told me

so how long does it last for you?

@@rascalabraham4835 I drove my car with just powerwashing stuff off every 1 or 2 weeks and no other shampoos involved for about 3 months or so when I decided to reapply it as it stopped beeding water that well... And after that I used the detailer(?) after washing the car with just water... What I noticed was that water on roof and bonnet(every level surface basically) did not bead off that well and leaves a bit of mark if dries out... So for example after washing the car I used to take it for a highway run to get water off... I still use it, I like this stuff

Ido not like spray waxes like to use on my car liquid wax to gets better shine. I. Think a gimmick to sell spray waxes liquid wax gets better shine that my opinion tell me how a spray wax better than liquid wax. When you have to use water for to work

Ive used this and I always use a rag to rub the 2nd coat in for a more even coverage. I usually let it sit for a minute or two before giving a good rinse. This stuff works pretty well.

So for an initial application on a car with no protection, you need to spray on to a wet car and wipe off. For any washes after that or on a car that already has protection it's simply spray on rinse off. You can machine wash any of our microfibre towels.

For your motorcycle we would suggest our ultimate fast finish. this is applied directly the microfibre towel before application to paint removing any risk of overspray.

Think it bonds to the base layer you put on. So when you spray it on you are topping up the base layer I gather.

UV, road grime and general nastiness!

@@T0m0thy, how does the UV protection of this stuff compare to Autoglym's Ultra Deep Shine or Fusso Cost for instance? I don't worry about the extreme convenience of this product if it's not as protective as a more sticky wax that needs rubbed on and off just.

Liam O'Flaherty fussi coat beats all meg waxes hands down in durability

It’s not a qd

Relaaaaax and breathe 😜

You sound like a lot of fun

@@JetskiMike how do I "sound" via words on a screen? I'd sound like you.

absolutely

You can absolutely apply a wax on top of the hybrid wax. It will bond to any existing protection.

You should use one or the other ceramic or wax they will NOT work together….,

Machine wash with Microfiber restore?

Thanks but no thanks then if this is the official answer

It will bond to existing protection however you'll only ever see the water beading from the last layer of protection you apply.

It's designed to cure on to a paint surface.

Usually any kind of wax does have some slip to it. By you being on a motorcycle, don't take any chances with your tires, that could mean the difference between life and death.

@@charlesvalkan252 we'll from watching reviews of this stuff pretty much any kind of cleaner such as super clean or purple power removes this stuff with ease. And most people apply it with a cloth not by spraying it on a wet panel and hosing it off. I should be ok. This stuff is not a real professional grade ceramic coating like xpel etc.

On a motorcycle we would suggest to apply it directly to the parts that have paintwork. It's designed to be activated by water when on the paint.

@@meguiarsuk well of course but I was concerned about how the bottles instructions say to spray it on and spray it with water. The run off was my concern. I will wipe it on my rims instead so not to get it on the tires

@@blue03r6 We would suggest something like the Fast Finish for more tricky areas like wheels. A sprayable protection.

Hi there! So the ceramic wax will bond to any pre existing protection. And we are yet to try it on the windows! Thanks for the comment.

Meguiar's UK Thanks for the quick reply, that's awesome to know, keep up the good work chaps!

@@meguiarsuk have you testet on glass yet??

@@jt19767171 If you want some protection for your glass we would suggest our perfect clarity glass sealant. The Hybrid Wax was designed to bond on your paint.

If the car is already waxed then apply whilst wet and simply rinse off!

You don't have to have a pressure washer no. You can use a normal hose with an attachment on the end.

Meguiar's UK cool. So there's something about get some pressure with the water that's important?

Hybrid Ceramic Wax has been designed to bond to paint surfaces. If you would like protection for your glass we would suggest our Perfect Clarity Glass Sealant

The protective properties are activated by the water. So the car needs to be wet in order to protect it.

True.. It gets extremely hot here in Qld downunder

Should already be launched!

It's already here but literally no where. No stores carry it. I found it on amazon but it's not gonna ship for a couple more weeks and I ordered it a week ago. If got very popular very fast so they went out of stock. I wish I ordered it the first time I saw it

@@andrewk8636 Now Wal-Mart has this product for $10 with a $5 coupon.

If the car already has a layer of protection then the Ceramic Wax will bond to it.

if you didn't want to do any other form of clean and prep on the car yes. But wash before you clay.

Exactly its basically Aqua wax and that doesn't last long.

On a well looked after car the Meguiars Hybrid ceramic wax will leave a real glossy finish whilst applying fantastic protection.

you can probably say the same with dish soap used as car soap, it's the long term where it counts. probably. lol.

Sushi wrong..you should not use dish soap as it strips wax

@@theanonymous882 oh shoot you right that was a stupid example. but i'm curious does this product fill in "micro scratches" like a wax would to improve shine or just more hydrophobic without adding the shine effect.

@@sushh1 soapy wooder

Only 11 months? Across the Irish Sea we have 12 months a year!

Onenasty306 yep 😖🤨

Onenasty306 so is “Paint correction”

@Casper Gomez stupid... SILICA SI02, not silicone.. but ok

now you have window tint film with ceramic coating hehe

Ceramic, silicone... same same apparently lol.

In essence rain will trap dust ETC... however there will be a layer of protection between the water and the clear after applying the ceramic wax so the water won't be in contact with the clear.

Arriving in the UK early March!

Gloss will be varied on how much the car is used. If it's driven every day it will get more dirt and grime than a car not used every day.

Products arrives in March!

As we were using the Wash Plus + the soap is applied directly to the mitt and therefore only one rinse bucket and grit guard is required.

We also don’t know what the original paint condition….ie….was this a three month old vehicle fresh from factory or four-five years allowing debris, contamination, industrial fall out, etched in tree sap, bird droppings, sun fade and oxidation etc….. In today’s market don’t always consider the build date on window sticker as a basis. A lot of today’s vehicles may get built but could be a significant delay between production and final delivery to dealer…..missing parts hold….semi conductor chips for various systems. You can only slow down production so much. At some point the vehicles have to be moved off assembly plant temporary storage area. Also remember the assembly plant storage area was probably never designed to accommodate such large numbers of vehicles at the plant. The dealers want the cars to sell but some are produced but holding delivery to dealers and ultimately to retail customers. Most storage areas are left outside in the heat, sun, tornadoes, hail and yes even vandalism for weeks some even months. Biggest immediate danger is hail and vandalism. The paint fade is more down the road!

For initial application the panel must be wet and buffed off. With every re-application you will need to wet the panel.

@@meguiarsuk got it, thanks :).

For Australia please follow the link. www.meguiars.com.au/

PIPOPE

That would be the Bug and Tar foam. Applied to a dry car the foam re lubricates any dried contaminants on the bumper so you can either jet wash or use a mitt to wash them off.

hahaha actually thinking on putting it on my 350z Also. Just got fresh bottle og gold glass waiting for clay bars got Meguiar gold classic style wax :)