ive watched SO MANY VIDEOS on how to get this up and running and you're the only person that mentioned the Linux subsystem for windows.. Thank you so much!

There are five billion tutorials on how to configure a Raspberry Pi. They are all the same and BAD ! They assume that everyone already knows everything and only show the configuration, not what to connect and how. This is the only tutorial on the internet showing everything step by step. From the things you need, through connection, to installation. WELL DONE. THANKS !!!

why am i able to ssh into raspberry on one machine but the other one constantly gives me permission denied when entering raspberry pi password?

Excellent! For someone who doesnt want to buy monitor keyboard and mouse, its a great alternative. Thank you data slayer!

ooo raspbian flash special features, that lil secret really helps

love u lots man! i reached the end of the video with no issues

PING and SSH are available in the current version of Windows 10. SSH may have to be activated via "Turn Windows Features On". PING may be default install.

Hi, so what if the password - "raspberry", doesn't work, what is the other alternative or how do i go about finding the password

Thank you - this helped a lot!!! here are some annotations which hopefully help some others :) I had to reboot my raspberrypi to be visible with a devicename in the wifi settings on Windows you need to generate ssh keys and move the private key into the boot folder of the microSD card otherwise ssh devicename won't let you in in case your raspi config is not found it is not installed ( it was not on my raspberry pi os 32-bit) so execute sudo apt-install raspi-config and execute it with sudo raspi-config in general be careful using sudo as a root, but you will know what you are doing. vnc viewer worked perfectly well on Windows 10

Excellent tutorial, Thank you!! It helped me to install OS on my raspberry pi. SSH option is helpful.

Very clear and useful. Thanks.

thank you so much bro. this worked like a charm on mac.

Great tutorial - had me up and running in no time.

Thank you so much for this tutorial 💯

I wish you were my teacher in my IT class, you're so good at teaching!

Super tip with the hidden menu, I didn't know that one :)

Very Very straightforward Tutorial. Thank You so much for this.

You are a life saver.

Great video! Thanks.

Thanks man!

Wonderful! No bullshit! Thanks for the tutorial!

Why did you mention you needed a linux box to ssh into the pi? Powershell can do it perfectly fine fron windows 10/11. PuTTy is also a great option as well.

Really nice, thanks. I got lucky choosing this video first from the search. I haven't even got my pi yet but this video covered exactly how I want to use it so thanks.

very good tut!

Thanks a lor for this great tutorial can you tell me what is the best raspberry pi to buy for my 3d printer

thanks for this idea

great tuto

SSH and Ping are native to Windows, no need to download Linux Sub System!

Is there a video to show me how to set it up from smart tvs?

grat i love this much simplier and works faster

I think My problem is my router is 5g, so how am I supposed to do this?

16:52 Could you go through how to do that? (VNC over Windows' Remote Desktop Connection)

I got all the way thru your tutorial but when I got to the point of entering a password I cannot enter anything. Do I absolutely need the Linux for Windows 10? I was able to "ping" the pi and also able to use the "ssh", but it literally will not allow me to type anything for a password. It's like my keyboard has been disabled. Don't understand why. Can you help me please.

Can this be done on an older pi that doesn’t have Wifi by adding a usb Wifi dongle? Does it need configuration on the initial sd card setup?

I use this method, for at least two years... How its new?

Great info but that music, just can't stand it anymore!!! 😂

cannot resolve raspberrypi: Unknown host this error is coming

thanks spiderman

As a user from windows and after 3 frustrating hours trying to install debian into a pi3 and seeing I have no sudo command installed , i see this video . Now interesting points about the linux experience : a) The hidden menu Ctrl shift X in raspberry installer why is it hidden ? It might help a person like me be able to get that sudo command ..b) why oh why would debiaan not fit a raspberry pi3 linux distro without sudo command , how can I program my wifi to work to upgrade ? It feels like insane torture . Patience is super low at moment.

are you doing this on linux terminal? can we do the same steps and command with MacOS terminal?

you should add configuration of eth0 as not everyone uses wifi.

You lowkey look like ryan renolds bro lol... in a good way

Hi, I followed your instructions on my Mac using the latest imaging package, I can see my raspberry pi zero w on my network but it will not let me ping or ssh into it. Any help or advice would be greatly appreciated.

how to do this without an SD card and use the on board storage?

I have question related to this topic. I have rPi 4 on the pole which is in failed state, not responding. I need to boot it up again, but I won't be climbing to reach it physically. I have the IP address, it's in the same network, I can connnect via putty. I have dovnloaded the rPi image and ubuntu image. Is there any way to boot Ubuntu on it remote and headless?

I'm trying to set up my pi but I'm stuck on it connecting to my wifi, should I restart from the beginning

What do you write in the password section when configuring wifi if your network is passwordless?

my Computer asked me for the public key. what to do?

Hello thanks for such an amazing video this is super helpful. Would you know how to download VNC viewer on MAC OS I am struggling to install it since it says corrupt file whenever I try...

FYI, I'm using Window 11 and PowerShell works and rest of tutorial still works

when i try to download rpi imager it wont let me, says virus detected :(((((

When I connect my Raspberry Pi with ssh it is saying connection reset. What did I made wrong?

You look almost exactly like Ryan Reynolds🤣

does it have to be sd card

I’m stuck at inputting the password for the raspberry pi on the terminal, It is not showing the password while I type and I put in raspberry but it didn’t grant me access

what do i do if it refuses to connect to the wifi. or rather im not seeing any evidence of it.

Wen I do ls it doesn't do anything

I followed the video and did all the commands you showed and when you did the LS command that was the first hint that you did not have a new install as there was more content in the home directory. The next clue was when I rebooted with VNC enabled it had the error "cannot display desktop". Being new to the Raspberry Pi what would you add to the video so it boots and the GUI can be seen with the VNC connection?

where's the like button?

my raspberry is not conecting to the wifi whatt do i do?

The problem is that i can not connect raspberry pi to wifi network because there are no keyboard to enter pass of wifi.

can't you use ssh from powershell? installing WSL just for ssh connection is a bit of an overkill, don't you think? getting putty would much faster. also the `sudo su -` is not something you want to advise to any user

You really should incase your pi to protect it from dust and other things. Besides it will look better in this video.

My pi doesn't connect automatically to my wifi network. Any advice?

Hi, I am confused on authenticating to VNC am I supposed to create an account or how do I know what user and pass to enter at 15:01? thank you!

CTRL + SHIFT + X

I for the life of me can not get pass the ssh password… he says “raspberry” is it but I keep getting denied. Any help ?

Raspberry Pi is basically Linux in Windows use Cmd ssh or use putty

Clickbait.

Naa I am on windows. I just use Putty. None of this linux rubbish LOL

"Headless" is as old as the Internet. Get out. Headless is only "new" if you are a total noob.

You *DON'T* need: *"sudo su -"* just enter *"sudo apt update && sudo apt upgrade"* *CLI* is Command Line Interface.

Anyone has the problem with the network adapter and the raspberry pi not appearing?

cannot resolve raspberrypi: Unknown host this error is coming

cannot resolve raspberrypi: Unknown host this error is coming

cannot resolve raspberrypi: Unknown host this error is coming

cannot resolve raspberrypi: Unknown host this error is coming