Milwaukee M12 Raptor Pipe Cutter Find out more here 👇🏼 uk.milwaukeetool.eu
Пікірлер: 87
@danieljadorie8292 жыл бұрын
In the US they would call you an HVAC technician. Being called an engineer here would make most blush haha
@unclefester4626 Жыл бұрын
Have one of the m12 copper tube cutters at work. Awsome tool!!!!
@elitech_uk Жыл бұрын
Your video are very informative
@StormmyStormmy Жыл бұрын
Hi, great video review, i have the standard version of this tool, it is a very good, i use the Nerrad s/s cutting wheels as they cut so well, thanks for sharing.
@superunknown87752 жыл бұрын
When are we going to get some more HVAC videos mate, you've been quiet for a while... you're missed 😔 1st comment...boom!
@richardhowlin60482 жыл бұрын
I second that 👆👆👆
@hvacuk89752 жыл бұрын
Thanks mate, appreciate it 🙌🏼 Will hopefully be back soon with some new Videos 🤞🏼
@professionalineverything3 ай бұрын
Still waiting @@hvacuk8975
@NorCal-refrigeration2 жыл бұрын
Those cutters save your hands. I use em all the time. 🤘⚡️🤘✨✨
@hvacuk89752 жыл бұрын
Definitely a handy tool to have on the van mate 👌🏼 Hope your well 👍🏼👍🏼
@hvacshinobi8047 Жыл бұрын
I would just want to say you are my new favorite channel. Thanks for all the great videos. I am wondering if you have a video or know where I can find a video or a good detail of how to check for noise in the communication line with an oscilloscope. I have read it in the manual but haven’t really seen a real world example of how to do it. Thanks.
@dylb8801 Жыл бұрын
Where did this guy go?? I miss you! A fridgey needs you in his life. Come back please 🥺
@hvacuk8975 Жыл бұрын
Back soon I promise 😅
@cannon8170 Жыл бұрын
Good video
@tommcintosh236 Жыл бұрын
HVAC tech from Australia, I have the old style and it only will only cut halfway through 1-1/8 (28mm) pipe. (Think it might be because of the thicker wall on r410a pipe) Have you tried this new one on anything similar?
@smason2 жыл бұрын
Excellent! I see people using them but rarely an in depth look. Many thanks,
@hvacuk89752 жыл бұрын
No problem 👍🏼 Thanks for watching 🙌🏼
@zabood53757 ай бұрын
Come back bro! Love the videos !
@robbiepmusic9 ай бұрын
I just ordered one and i only need to install 7 more rads but quite a lot of pipe though. How many cuts can i do on 15 and 22mm zinc plated steel pipe before the cutting disks need replacing? Thank you for your review good sir.
@michaelsalberg56082 жыл бұрын
Hi there, looking for some help with validation of existing systems, any suggestions as to what to look out for or what to check would be greatly received, thanks in advance.
@thesilentonevictor2 жыл бұрын
Back on track Great review 👌
@hvacuk89752 жыл бұрын
Thank you mate 🙌🏼
@bibabutzemann5661 Жыл бұрын
Hi, i know it says that it cut cupper from 12 upwards but can your try 10x1 cupper please? i mean i think it can still cut it.
@user-ru1kr1de9d11 ай бұрын
Why did you stop posting? I hope it continues ❤
@Nightmare521994 ай бұрын
Can you give us an update on this? I am doing HVAC work and I wanna know if it's suitable for cutting inch pipes. I really wish they had a version of this tool cutting from 1/4'' to 1''.
@zxcherry73567 ай бұрын
Is this the same size as the older one? As the older one was quite compact..
@jamesterry74252 жыл бұрын
Would the old one not cut stainless steel if it had the same cutting wheel as what comes with the new m12 raptor?
@hvacuk89752 жыл бұрын
Apparently it’s a slightly different machine to the older version so I’m not sure 🤷🏻♂️
@dumdiversaspapalbull1452 Жыл бұрын
8:52 Gredd day in the morning.
@twinenk15 Жыл бұрын
Does it cut galvanized pipe?
@sammysomething2922 Жыл бұрын
Meenwhile here in the usa 8 months later still waiting for the new cutter to be sold😢
@nickfishlock87432 жыл бұрын
Is it just a different blade or is the machine a new unit. Where did you get it from. Thanks
@hvacuk89752 жыл бұрын
Apparently it’s a different unit, should be available soon 👍🏼
@bensayers43692 жыл бұрын
Have you got a link to purchase please.
@salmanba2pplite693 Жыл бұрын
Wow
@bossmanz28 Жыл бұрын
Can it cut 1/2" metal conduit? I jus got the older model and it will cut 3/4" but NOT 1/2". Found a forum online talking about it and there is a design flaw where the pawl doesnt engage enough on that size conduit specifically which unfortunately for me is the only reason i bought it for. I know its advertised as a copper pipe cutter but regular manual cutters even cut metal conduit
@aramirez159426 күн бұрын
Did you ever find out? looking for it to be able to cut 1/2 inch and 3/4 conduit
@bossmanz286 күн бұрын
@@aramirez15942 I couldn't figure it out. Couldn't get it to cut 1/2". Worked on 3/4" but not that effectively. I took it apart and put it back together a bunch of times trying to modify some thing that I saw somebody post about. Didn't work for me. I sold it. Luckily I only paid 40 for it and sold it for 60
@dwaynemvp19882 жыл бұрын
Where can you buy this?
@jamesterry74252 жыл бұрын
When will this come out in the uk for everyone? Cant find them anywhere
@hvacuk89752 жыл бұрын
Hopefully available soon mate 👍🏼👍🏼
@georgekymany27192 жыл бұрын
I got mine today mate. Check it out on FFX. It's £149 for bare tool.
@yungbaz993 ай бұрын
Wish I could buy in the us
@rorymccrudden55122 жыл бұрын
Where can this be purchased?
@PNWLiving17256 ай бұрын
Is this only in europe?
@mikeverkerk57612 жыл бұрын
Can you show how fast it cuts carbon steel or stainlesssteel
@hvacuk89752 жыл бұрын
I’ll try and get a video up when I can 👍🏼👍🏼
@darrenboyd1991 Жыл бұрын
Would you use this tool on EMT pipe( electrical pipe)?
@rattatoolie725310 ай бұрын
That’s what I was thinking too. I’m definitely gonna make purchase. Stainless is a lot harder to cut than emt, so I’m sure this would have no issues with that
@andrewwatts81772 жыл бұрын
Can it cut other pipe sizes or just those stated by Milwaukee?
@cannon8170 Жыл бұрын
Unfortunately 1/2 is lowest. If only it could do 1/4 and 3/8. Good tool but struggles with soft drawn copper
@herm20v56 Жыл бұрын
Can it cut 3/8 ?
@Drakeziel Жыл бұрын
If it lasts 6 months, pays for itself, in time.
@edgarpanosyan87632 жыл бұрын
Hello Where can we buy this?
@l31fos152 жыл бұрын
Long time! - when are we getting more vids?
@hvacuk89752 жыл бұрын
Hopefully soon mate 🙌🏼👍🏼👍🏼
@l31fos152 жыл бұрын
@@hvacuk8975 Ill be keeping a look out
@romulocarvalho3778 Жыл бұрын
Cortar tubulação de 1/4 ??
@9zero4722 жыл бұрын
How long does the blade last
@hvacuk89752 жыл бұрын
Not sure yet but I’ll keep you updated 👍🏼
@KingofNerds01 Жыл бұрын
Looks like that 7/8 is R22 rated not 410a unless they have improved them that much
@Link-pr4yq Жыл бұрын
How can I get this in American
@rui-hcr32 Жыл бұрын
4mmは、切断出来ますか?
@MrEmoji-rf7wf2 жыл бұрын
Can this cutters cut electrical emt?
@georgekymany27192 жыл бұрын
Of course. Galvanised and carbon steel are harder than EMT.
@romulocarvalho3778 Жыл бұрын
Olá amigo esse corta tubulação de 1/4
@jonathancontreras5370 Жыл бұрын
Question can this cut emt conduit
@davedave9780 Жыл бұрын
I wish someone would answer this exact question
@rafaeltorres-rivera16692 жыл бұрын
Why don’t they have these in the USA
@moneyjeff110 ай бұрын
send me one of those please! I'm in the states! I will pay for shipping!
@Mack_Dingo2 жыл бұрын
Can it cut EMT?
@georgekymany27192 жыл бұрын
Yup. Like butter
@johncouture67528 ай бұрын
I don’t think this was released in the USA
@dannyf51572 жыл бұрын
So I have the old one couldn't I just get the new style blades and cut stainless now 🤷♂️
@georgekymany27192 жыл бұрын
Nope. The spring tension in the INOX jaws is quite stronger than the older model which was specifically made to cut only copper.
@andyking05 Жыл бұрын
Does it cut copper better than the old one?
@darthorion20022 ай бұрын
Do you know any British HVAC/Engineering Companies but Specific in South England 🏴 that are hiring for apprenticeships for Americans 🇺🇸. I already have my HVAC Certification and I am working as an Engineer at the Great Wolf Lodge but I want to work in 🇬🇧 UK. I am currently getting my work visa.
@refrigerant1 Жыл бұрын
Unfortunately not possible to cut dimensions of 12-, 15-, 16mm pipes. I try few tools, but noone of them able to cut them. I show for the seller as well, He said I have right. My opinion is not worth it to buy. :(
@iain8284 Жыл бұрын
MAKE MORE VIDEOS
@TmS86 Жыл бұрын
Looking at the rpm of the new vs the old it's not much of a difference. I have cut so many stainless steel pipes with the old one without any problems that I can't justify the price of the new one!
@mountainklima5602 Жыл бұрын
He hasent post any videos lately wonder why?
@user-xz8lo7fd8c Жыл бұрын
Hello. My question is not on the topic of the video, but is about HVAC technology. I am an HVAC technician from Ukraine, I have more than 15 years of experience, I want to continue working in my specialty. Can you please tell me what permissions you need to get to work in this industry?
@1ilpeep690 Жыл бұрын
You must pass a “general contractors licensing test”
@54321kola10 ай бұрын
Too expensive
@SoutheastHVAC2 жыл бұрын
This actually has less rpms than the regular which is 500. This one has 380
@grantkenney1182 жыл бұрын
i think that's due to twisting on half inch soft drawn pipework the old one needs extra care on soft drawn because of the speed and stopping force
@nakataara Жыл бұрын
is not accurate for small cuts on copper, i sold my one and bought a 12cpc 😂 back