New pc no monitor signal fix
Рет қаралды 293,348
Күн бұрынSo you build a new PC but your monitor is not receiving any signal? Check the solutions in this video so you can make your new pc work today!
- If your pc is 6 months old and above try the solution in this video▼
• Pc is on but no monito...
- If I was able to help you and you wanted to give back please use this link bit.ly/givebacktomac
Recommended graphics card▼
Gpu options▼
Rtx 3090 amzn.to/34BzOEn
Rtx 3080 amzn.to/3jBs5up
Rtx 3070 amzn.to/356j9ce
Rx 6900xt amzn.to/34DeU7q
Rx 6800xt amzn.to/37bj0Ft
Rx 6800 amzn.to/2W9zw2x
EVGA RTX 2080ti 11gb: amzn.to/2O1O7dO
Gigabyte RTX 2080ti 11gb: amzn.to/2NUHytN
Pny RTX 2080: amzn.to/2NXGuoL
Zotac Geforce RTX 2080 8gb: amzn.to/2NYQ8Yt
Gigabyte RTX 2080 windforce OC: amzn.to/2xrGtQI
Asus RTX 2080-08GB: amzn.to/2NxaAjS
Evga Rtx 2060 super: amzn.to/2XW9gaz
GIGABYTE Radeon RX 5700 8G: amzn.to/2JMCeEJ
Gigabyte Rx 5500 8gb: amzn.to/2ZjVySc
Asus Radeon rx vega 64: amzn.to/2MuJCoT
Msi Radeon rx vega 56: amzn.to/2lffVM9
Asus Radeon rx 580: amzn.to/2JLT4lH
Msi gaming radeon rx 570: amzn.to/2JR5o7x
PowerColor Rx 570 4gb: amzn.to/3mapZnB
How to do bios update by Pcgamesn ► • How to safely perform ...
SOCIALS▼
KZfaq: / maccoyzkie
Facebook:
/ maccoyzkie
Twitter: / mkb_cult
Flickr: www.flickr.com/photos/mkbcult/
IG: / m4coyzkie
TimeStamp▼
0:00 New pc no monitor fix
1:13 How to know? Pc parts incompatible
3:14 Bios update
4:57 Correctly plugging your monitor
5:50 Final thoughts
FAQS:
1. Can you update bios without monitor?
- YES! In fact even without cpu, gpu or ram installed you still can if you have the latest motherboard since it's becoming common for motherboards nowadays with physical "FLASH BIOS BUTTON" Check your motherboard manual for more info.
- No, if you got the old motherboards but like i said in the video bring it to a local shop they will know what to do. that's why i don't suggest beginners updating their bios on their own
2. My pc was working for at least 2 months already then suddenly no signal
- check this video instead • Pc keeps restarting FI...
3. My pc never stop restarting
- here is your answer • Pc keeps restarting FI...
4. I only have black screen and a mouse cursor, what do i do?
- check this tutorial • Black screen on window...
#nomonitorsignalfix#pcfix#techtutorial
@MacCoyzkie 3 жыл бұрын
FAQS: 1. Can you update bios without monitor? - YES! In fact even without cpu, gpu or ram installed you still can if you have the latest motherboard since it's becoming common for motherboards nowadays with physical "FLASH BIOS BUTTON" Check your motherboard manual for more info. - No, if you got the old motherboards but like i said in the video bring it to a local shop they will know what to do. that's why i don't suggest beginners updating their bios on their own 2. My pc was working for at least 2 months already then suddenly no signal - check this video instead kzfaq.info/get/bejne/mOCGZ7pz2sDIfIk.html 3. My pc never stop restarting - here is your answer kzfaq.info/get/bejne/mOCGZ7pz2sDIfIk.html 4. I only have black screen and a mouse cursor, what do i do? - check this tutorial kzfaq.info/get/bejne/mNmZqdqmuNK0fGg.html
@tektronixhd6107 3 жыл бұрын
ok now after i did this it's all ok but i think is something from the window maybe cuz j can see the mouse jcone moveing on the screen but it's all black screen
@zajvincent5823 2 жыл бұрын
How about black screen and 99 at the bottom? :(
@MacCoyzkie 2 жыл бұрын
@@zajvincent5823 watch this link kzfaq.info/get/bejne/mNmZqdqmuNK0fGg.html instead
@zajvincent5823 2 жыл бұрын
@Mac Coyzkie Thank You
@MacCoyzkie 2 жыл бұрын
@@zajvincent5823 you're welcome
@FESCAN233 3 жыл бұрын
Firstly, I want to thank you for your video very informative. Secondly, I want to highlight some points that they might be reason also for lost signal. 1) check all the screws attached to the motherboard MB are firmly tight and covering all the dotts around the screw. 2) make sure that all memory cards also firmly tight and follow the instructions on MB. 3) make sure that HDMI cable is completely inserted in the outlet of the graphic card. I hope🤞 you all have fun assembly of your PC'S. Good luck
@MacCoyzkie 3 жыл бұрын
Awesome! Thanks too for the feedback:)
@superarsenal009 2 жыл бұрын
If a screw is not attached to the motherboard MB and covering all the dotts around the screw, my monitor won't have signal?
@spencerweller8671 Жыл бұрын
I need an explanation on it not being screwed in all the way
@hydrabuster3981 2 жыл бұрын
I didn't know I had to put my hdmi into the graphics card slot, nobody else I saw mentioned that... Thanks a ton.
@MacCoyzkie 2 жыл бұрын
basic things that we often forget. glad it worked for you bro, you're welcome :)
@soojitillmanns7215 2 жыл бұрын
This comment saved me! Thanks to you both!!!
@benonxtc9460 Жыл бұрын
LOVE YOU
@jacure123 Жыл бұрын
I did that and my pc monitor is still not on.
@hydrabuster3981 Жыл бұрын
@@jacure123 is the monitor not turning on, or is it displaying something about not being connected or whatever (I forgot what mine did exactly)
@trenthunt5106 Жыл бұрын
It's been a year since you made this, and you saved my life! I couldn't figure for the life of me what this issue was. All to realize I didn't plug into the graphics card slot. Thank you so much!
@MacCoyzkie Жыл бұрын
no problem bro! glad its all good now 👍
@boastfulsum1108 Жыл бұрын
THANK YOU SO MUCH!! I just got a new pc and was so excited to play on it only to find it not working and tried to fix it over like 5 hours and this really saved me a bunch on time and made be be able to play games finally. Definitely earned an extra sub!
@MacCoyzkie Жыл бұрын
glad the video was helpful! you're welcome and thanks too for the subbed!
@zstoneskating9772 3 жыл бұрын
Thank you so much! I was literally panicking because I spent like a month and a half buying parts between paychecks and I thought I broke something. Much appreciated!!
@MacCoyzkie 3 жыл бұрын
you're welcome!
@gamerio9945 Жыл бұрын
BROTHER YOU ARE A GODSEND. Built my PC but plugged the HDMI into the motherboard, not the graphics card. Watched your vid, applied the solution, and problem fixed! Thanks so much!!
@MacCoyzkie Жыл бұрын
glad i was able to help bro!
@ZelDuhhh 3 жыл бұрын
Literally a fucking life saver. I was thinking my monitor was outdated and almost went and spent 300$
@oliverrostadius101 3 жыл бұрын
thank u so much. I've recently built my pc and are waiting for my graphics card cuz its out of stock right now so I figured to try and boot up the system and see if it was working. I got so scared when the monitor didn't receive a signal and thought my computer was broken. I thought every motherboard and processor came with built in graphics.
@MacCoyzkie 3 жыл бұрын
you're welcome bro, new pc parts that are faulty are so very rare, so need to worry about your build. I hope you get your gpu soon. Btw thanks too for the feedback
@bluehood4052 3 жыл бұрын
You saved me from my 10 hour work thank you god bless you 🙏🏾🙏🏾🙏🏾
@MacCoyzkie 3 жыл бұрын
you'e welcome, thank you too for sharing your feedback
@cquence1983 Жыл бұрын
YOU ARE A LEGEND!!!!!!!!!!! I literally gave up until I ram up on this video. It was not knowing that the HDMI need to go into the graphics card. I thought I needed to install the graphics card drivers first. INCREDIBLE
@MacCoyzkie Жыл бұрын
glad it was helpful bro
@aiivii6596 Жыл бұрын
Thank you for this! As a first time builder, I had everything done and pc on. Really scared me with that no signal on the last part. Turns out I had also connected my monitor cables to my mobo instead of the gpu! 😭 I kept looking at my gpu first to see where the heck the ports where and didn’t realise it was covered.
@MacCoyzkie Жыл бұрын
glad it was helpful
@rasmith703 3 жыл бұрын
This video helped a lot. I had my HDMI plugged into my MOBO lol
@MacCoyzkie 3 жыл бұрын
Glad it does 😊 thanks for the feedback
@frostexe8341 3 жыл бұрын
Will it not give display if it’s plugged into mobo ?
@MacCoyzkie 3 жыл бұрын
@@frostexe8341 depending on your build, if you got a cpu that doesn't support on board graphics it won't work. What's your pc specs anyway?
@frostexe8341 3 жыл бұрын
@@MacCoyzkie I just built mine it’s a b450 tomahawk max , ryzen 5 3600, 1660 super , 750 watt psu I know I don’t need that much power, 2 sticks of 8 Gb Corsair vengeance ram rgb pro and 1 tb ssd
@MacCoyzkie 3 жыл бұрын
@@frostexe8341 ok in your build you need to plug the monitor in the gpu port. your motherboard monitor port will not be working since your cpu doesn't support integrated graphics
@stephenheaton66 3 жыл бұрын
Thank you this video really helped. Turns out the cpu I was using was incompatible until I updated the latest drivers for B150 chipset. Dropped to a lower cpu I had and got an output. Should be smooth sailing from here 🤞. Thanks again
@MacCoyzkie 3 жыл бұрын
awesome! you're welcome bro and thank you for sharing your feedback!
@aye3678 Жыл бұрын
You're a life saver dude! Thank you sooo much! I was getting frustrated and turns out I didn't havr the hdmi cable plugged into the graphics card. Thanks again.
@MacCoyzkie Жыл бұрын
no problem bro
@Murks_ 3 жыл бұрын
You have saved my life 2TIMES NOW first I watched this video and found out my cpu didn't go with my motherboard then I came back and found out my cpu dosint have integrated graphics so now I know THANK YOU I subbed and liked
@MacCoyzkie 3 жыл бұрын
Wow awesome bro! You’re so welcome! Thank you too for the subbed and feedback 😊👍
@coltonalex7297 3 жыл бұрын
Super helpful! I definitely didn’t plug my monitor in the right spot
@MacCoyzkie 3 жыл бұрын
awesome! thanks for the feedback
@bonelessbear 3 жыл бұрын
You saved my life! Thank you so much , Legend
@MacCoyzkie 3 жыл бұрын
Glad i can help, thanks too for the feedback
@absoliutlyorganic 2 жыл бұрын
1 st time builder here, i also plugged monitor to motherboard instead of GPU..Thanks!
@MacCoyzkie 2 жыл бұрын
we all go through that bro, you're welcome
@notgeeyo 3 жыл бұрын
Man you really saved me. It was because I needed a bios update. I had purchased the newest motherboard from ASUS so once you said it I had a feeling it was that. I called support and they said yup I needed a bios update with bios flashback
@MacCoyzkie 3 жыл бұрын
glad i was able to help bro! Just be careful doing the bios update and make sure that there will be no power interruption of any kind
@tinableachxx12 3 жыл бұрын
Straight to the point very easy to understand thank you so much you just solved my bf's problems
@MacCoyzkie 3 жыл бұрын
good to hear that :) thank you too for sharing your feedback
@audioyogi5781 2 жыл бұрын
Can you please help me? I have Gigabyte z590 AORUS Elite AX motherboard and an Intel Core i5 10500 CPU. It has integrated graphics and on my motherboard I have only DP port. As I’m connecting it to my monitor through a DP to HDMI cable, I have no signal when I turn the PC on. Also I have a Corsair Vengeance RGB Pro RAM which is plugged in into second RAM slot on my motherboard. I have also tried two sticks of RAM in 2nd and 4th ports. It just won’t show me BIOS, completely no signal on my monitor while corresponding HDMI is selected in its settings. I have also tried with PCI express video card instead of integrated graphics on my Mobo, same results for some reason no video signal at all.
@MacCoyzkie 2 жыл бұрын
I got two theories. one, your monitor cable converter from dp to hdmi might just be faulty so try other cables if you got one or at least borrow from someone before buying a new one. Two, this might be your psu or power outlet not giving enough power for the system. Psu might be faulty so test it using a psu tester like this amzn.to/3mWD0np psu rarely becomes faulty even if its new but not impossible. Power outlet low power draw is usually caused by power fluctuation so if you got any power fluctuation lately you should consider that as a reason.
@Lyoko104 2 жыл бұрын
It’s been a year so I’m not sure if you still read your comments but your third solution actually helped. Holy shit
@MacCoyzkie 2 жыл бұрын
responding to all comments are still manageable :) Glad it worked for you :)
@Lyoko104 2 жыл бұрын
@@MacCoyzkie what a legend. thanks again
@MacCoyzkie 2 жыл бұрын
@@Lyoko104 you're welcome bro
@llovanirincon9326 3 жыл бұрын
Spend so many hours troubleshooting & finally I found the right video. I upgraded from a ryzen 5 1400 to ryzen 7 3700x & upgraded the power supply from 500w to 700w . I turn it on , all fans spin expect the graphic cards but the power is on & I notice I’m not getting any power to all my USB drives . So I came to the website motherboard compatible & it gave me a Red signal meaning is not compatible for ryzen 7 so I’ll need a new motherboard for sure .
@MacCoyzkie 3 жыл бұрын
you can buy too but you can also just update the bios, what motherboard do you have anyway?
@llovanirincon9326 3 жыл бұрын
@@MacCoyzkie I have a prime Asus a320m-k motherboard . It’s so weak , I’ll be replacing it with “ Asus X570 motherboard
@MacCoyzkie 3 жыл бұрын
@@llovanirincon9326 that's more like it bro :)
@skylerbogacki7345 3 жыл бұрын
great video man my hdmi use to work fine plugged into the motherboard but recently i was moving my setup around and went to do school so i plugged everything back in and it didn’t work watched your video and now it’s working!!
@MacCoyzkie 3 жыл бұрын
oh nice! glad i was able to help bro!
@Gregoz987 2 жыл бұрын
This was really helpful. I watched Uvids not getting the exact answers and feeling even dumber. I got a good place to start and you gave these really important links. First time builder to. I wish I could give more thumbs up then 1
@MacCoyzkie 2 жыл бұрын
You're welcome bro! and thank you too for the feedback :)
@piratediaries572 2 жыл бұрын
You saved me bro! I hate to admit it but it was the monitor hdmi not being connected to my GPU. Which now that I think about makes so much since. Since that’s where my graphics are coming from! I thought the motherboard was broken lol 🙏🏽
@MacCoyzkie 2 жыл бұрын
no problem bro! glad i can help :)
@lolokula_gaming9403 2 жыл бұрын
What whould happen if you didnt connect?
@jpbaker3296 3 жыл бұрын
Thank YOU SOOOO MUCH if you are having a problem this youtube is the BEST THANKS
@MacCoyzkie 3 жыл бұрын
you're welcome and thank you for the feedback :)
@magicgecko6249 3 жыл бұрын
Yo dude this helped so much my guy! I had my hdmi plugged into my motherboard, not my graphics card! Thank you
@MacCoyzkie 3 жыл бұрын
You’re welcome! Thanks for the feedback as well
@cozy5122 3 жыл бұрын
Same here bro! Thanks @Mac Coyzkie
@suheem4081 3 жыл бұрын
Why doesn’t it work if it’s connected to the mobo
@MacCoyzkie 3 жыл бұрын
@@cozy5122 you're welcome too bro, thanks for the feedback
@MacCoyzkie 3 жыл бұрын
@@suheem4081 your cpu probably don't have integrated graphics or you got a gpu installed
@GordMendivil 3 жыл бұрын
Thanks I was building my little brother's pc and didn't know that most AMDs processor didn't have dedicated graphics.
@MacCoyzkie 3 жыл бұрын
Only the G series has apu in any ryzen lineup. Glad it help 😊👍
@johnvicks4 2 жыл бұрын
Man love you bro. I hope you get all the girls in your 500 km radius. You don't even know how much you have helped me. I had plugged the hdmi in my mobo and i was so much mentally tired and angry that I coudn't use my pc from past 1 day. Thanks mac
@MacCoyzkie 2 жыл бұрын
Glad I could help bro!
@fastpastecheese 3 жыл бұрын
Wow. All I had to do was plug in the HDMI into the correct port. Thanks ur the best
@MacCoyzkie 3 жыл бұрын
you're welcome!
@hiddenanddeletedvideos6971 3 жыл бұрын
Omg dude that fixed it thank you had it plugged into the motherboard
@MacCoyzkie 3 жыл бұрын
You're welcome bro! thank you too for the feedback!
@jaydanmorris1106 3 жыл бұрын
Thank you so much I recently built my pc and was plugging the display port into the mother board thank youuuuuuuu!!
@MacCoyzkie 3 жыл бұрын
Glad I could help! thank you too for the feedback
@hasselayuste901 3 жыл бұрын
Hello! Thanks for sharing this video. I just a question. My situation is all of my parts are new and I just built it yesterday. I have ryzen 9 3900x, asus tuf gaming x570 plus wifi and msi gaming trio 3060 ti as gpu. I've checked all the parts to the website that you said in the video and it is all compatible. Since they are all new parts updating the bios is not needed. Do I have to plug in the display port and hdmi at the same time so I'll have a display/signal? Thank you I'm noob at this.
@MacCoyzkie 3 жыл бұрын
it's ok bro we all learn things in the beginning. anyway did you plug your monitor in the gpu input, if so that should work and is ready to install windows. Also the common thing we often forget is plugging the 8+4pin psu power to the motherboard. So double check if those are plugged in, make sure the rams are correctly seated and it will have a click sound locking it in place if correctly seated
@hasselayuste901 3 жыл бұрын
@@MacCoyzkie it's ok now bro! thanks to you. cheers!
@MacCoyzkie 3 жыл бұрын
@@hasselayuste901 that's good news then :)
@lloydyu24 Жыл бұрын
Guys, if all else fails, try to tap the “CLEAR CMOS” 2 pin on motherboard with a flat screwdriver. It just worked for me today after trying all methods.
@bkaiii8350 3 жыл бұрын
Nothing for me is working, I checked all my parts, ports, I even checked if it was my monitor by connecting my PS4 to it or hdmi/display cable was the problem but nothing has worked, I also took apart my gpu and put it back in and made sure everything was running and it was, but I still can’t get my pc to display anything, please help!
@MacCoyzkie 3 жыл бұрын
may i know what are your pc specs, maybe i could help
@floppachoppa5305 3 жыл бұрын
@@MacCoyzkie please help my friend has the same problem specs: i5 9400f gigabyte gtx 1050 ti gigabyte z390 patriot viper steel 3000mhz 16gb aresgame 500w psu
@MacCoyzkie 3 жыл бұрын
@@floppachoppa5305 ok, may i know how the problem started?
@georgemartin813 3 жыл бұрын
Mac Coyzkie hey I’m having the same problem if you could help that would be great! My hdmi cable is in my gou and I tested my monitor with my PS4 and it works. My parts are: Ryzen 5 3600x Corsair 16gb 3600mhz Xfx rx 5600xt Msi b450 tomahawk max If you could give me some advice it would be much appreciated
@MacCoyzkie 3 жыл бұрын
@@georgemartin813 if this is a newly build with brand new parts that should be good to go. You need to test parts one by one to know if something is faulty. i suggest ask a friend with compatible pc to try out your rams and gpu one at a time and if problem persist then it's one of the components they tried. If problem did not persist then you got a faulty motherboard or power supply, though you can use something like this amzn.to/38SM0l9 to test your psu
@not41pop 2 жыл бұрын
Bruh when you said it needs a graphics card to work I started punching air !!!! Gg great video!
@MacCoyzkie 2 жыл бұрын
haha i bet you panic before you watch the video 😂
@revive1612 Жыл бұрын
So I bought a new prebuilt cyber power pc. Turns out I had the hdmi cable plugged into the wrong place. I was so worried lol. Thanks for the help.
@MacCoyzkie Жыл бұрын
Glad I could help!
@ronstephenyambot384 3 жыл бұрын
I just want to ask some questions. My uncle is experiencing the same problem. He already switched 2monitors to check if his newly build pc is working but it isnt. It say no signal. How can we update the BIOS if saying no signal? Thank you for the response
@MacCoyzkie 3 жыл бұрын
may i ask first what is your uncle's pc specs?
@kosa9366 3 жыл бұрын
i already found the solution after u replied to me, i plugged it in the wrong slot
@MacCoyzkie 3 жыл бұрын
awesome! we often make that mistake :)
@KyeSki 3 жыл бұрын
THANK YOU SO MUCH
@MacCoyzkie 3 жыл бұрын
you're welcome! thanks too for the feedback
@TailAbNormal Жыл бұрын
Solved the issue. It was #3. Didn't even realize there were other HDMI ports. Thanks
@MacCoyzkie Жыл бұрын
no problem bro
@gorskei5868 3 жыл бұрын
Hey, i am facing this problem actually...and i'm terribly afraid to go for a bios update, even if it scares me the fact that it could messes things up badly, anyway, i will leave you my build...perhaps you have some suggestions, let me know! Mobo/ Asus prime z490-p Cpu/ intel core i5 106000k Gpu/ rtx 2060 gaming z Corsair cx550m 16gb ram Not sure if youd need other, i think these are the main things to know. Hdmi is plugged in the GPU part, fans all working, everything just perfectly seem to go good. I think i will just disassemble it and start again, maybe changing gpu's slot...might be causing some issues? No idea !
@MacCoyzkie 3 жыл бұрын
always use the first gpu slot near the cpu, but if you have done that already and still not working i think you need to bring those pc parts back to the local shop and have them fix it. It's new anyway if they mess it up you can always ask for replacement
@adminend4727 Жыл бұрын
Just built my first pc and forgot to switch on the PSU LOL
@MacCoyzkie Жыл бұрын
got too excited lol! congrats with your new pc!
@oscarinho3504 3 жыл бұрын
Thank you a lot, i put the dplay port on the pc instead of my GC for my first pc ❤️❤️
@MacCoyzkie 3 жыл бұрын
you're welcome! thank you too for sharing your feedback
@jacquelinec7961 2 жыл бұрын
Fam. I’m one of those who put their display port on their mobo 🤣 I didn’t notice the GPU even had slots on the left. So happy it was just that & nothing complicated
@MacCoyzkie 2 жыл бұрын
but you got nervous there for a moment right lol.. glad its all good now
@Rhequ 3 жыл бұрын
Ive had this PC for few months now, got a new CPU (Ryzen 7 3800x) put everything in yesterday and it worked fine with no issues. Turn my PC on today and i have no display and my keyboard isnt even lighting up? It was fine yesterday but now it magically dont work. Already updated my BIOS to support it. Its plugged into the GPU not Mobo my HDMI and DP
@MacCoyzkie 3 жыл бұрын
i see, i could only think of one thing that is causing this for you. it may be the power supply not having enough juice for the system or your house could have a low power output. The low power output happens sometimes after or when there is an electrical fluctuation.
@shaunakmitra3701 3 жыл бұрын
Just built my first pc and it has a blue screen and says no signal but I did plug it into the graphics card and it still said no signal and I think the parts are compatible my specs are B550 mobo Ryan 5 3600 Gtx 1660 super 450w bronze rated psu 3200 mhz ddr4 Corsair ram 1tb seagate hdd Plz help
@viax4748 3 жыл бұрын
Same bro
@MacCoyzkie 3 жыл бұрын
bro if you're running six more fans in your pc i think 450 watts psu is lacking. This might be a low power draw issue. Try removing the fans during first boot
@shaunakmitra3701 3 жыл бұрын
Mac Coyzkie I am only using 4 in total
@MacCoyzkie 3 жыл бұрын
@@shaunakmitra3701 ok, can you unplug all other fans but keep the cpu fan running, and try to boot it up
@shaunakmitra3701 3 жыл бұрын
Mac Coyzkie I tried it but it still said no signal
@dhirajshaw4822 3 жыл бұрын
Thank you so so so much bro ❤️
@MacCoyzkie 3 жыл бұрын
Any time bro, glad i was able to help. thanks for the feedback
@dinariharlin7113 Жыл бұрын
THANK YOU. I would if never knew there was an HMDI port in the mf GPU. You absolutely saved me time.
@MacCoyzkie Жыл бұрын
no problem
@kaelpatel5937 2 жыл бұрын
Hey man, just wondering I had a problem with my monitor due to installing the amd software and I was wondering if you might know what the problem might be, it says there is no signal and this only occurred after installing the software and restarting the computer which is my I don’t think it’s faulty parts etc. Everything turns on just fine just my monitor won’t and it says no signal, do you know anything that might help?
@MacCoyzkie 2 жыл бұрын
you need to ddu the amd driver, check this video kzfaq.info/get/bejne/mNmZqdqmuNK0fGg.html and skip to 4:08
@kaelpatel5937 2 жыл бұрын
Hey, I just tried this but I’m not too sure how to go into safe mode as I interrupt the boot up with the restart 3 times but nothing shows up on the monitor, am I doing something wrong?
@MacCoyzkie 2 жыл бұрын
@@kaelpatel5937 there must be a 2 second interval between the on off interruption
@echotic7053 2 жыл бұрын
THANK YOU SO MUCH IT WORKED!!!!!!
@MacCoyzkie 2 жыл бұрын
you're welcome!
@dabbingclanofficial2107 3 жыл бұрын
thank you so much the graphics card needed the plug not the mother board this helped so much man thx
@MacCoyzkie 3 жыл бұрын
you're welcome bro! thanks too for the feedback
@casper.morales 3 жыл бұрын
Hi Mac Coyzkie, I have GA-A320M and a Ryzen 5 3400G, When I turn it on with the case button it will turn on but i cannot use the button to turn it off again. I also have the same problem with having new pc with no monitor display but when i plugged the keyboard it also wont work. Is this because my MOBO needs a BIOS update or is my CPU or MOBO faulty? Waiting for your reply. Sincerely, Thank you
@MacCoyzkie 3 жыл бұрын
nothing is faulty bro, your motherboard needs bios update, i suggest bring it to the local shop where you got it from and have them update it for you
@brianleonard6598 3 жыл бұрын
All my parts are compatible, I'm using the MSI MPG B550 Gaming Edge Wifi with the Ryzen 5600x. I know that some people have to update the BIOS, but my MOBO came with a sticker on the box that says it supports AMD RYZEN 5000 DESKTOP READY. Would you still recommend updating BIOS anyway? Could that still be a possible issue?
@MacCoyzkie 3 жыл бұрын
some pc stores even online are updating their mobos to latest so it will have better market. some just doesn't care at all, you need to contact the store where you got the motherboard from and ask them to confirm. because after building your pc then you see no signal on your monitor while it is plugged in the gpu port then that motherboard may not be updated
@brianleonard6598 3 жыл бұрын
@@MacCoyzkie Just throwing this out there in case someone reads through the comments with a similar question. It turns out it was just a BIOS update that was needed. The front of the box can be very misleading apparently.
@marlonmacabenta4409 3 жыл бұрын
Tried reseating RAM for 1hour and the third solution is all it'll take lol. Thanks for this!
@MacCoyzkie 3 жыл бұрын
nice bro! thanks for the feedback too :)
@nebula4554 3 жыл бұрын
I just change my case today ... Every component was doing good until i change the case and then no signal ... Pls help
@MacCoyzkie 3 жыл бұрын
that could be just the front io not plugged in correctly, also check if the stand offs
@nebula4554 3 жыл бұрын
@@MacCoyzkie my case didnt have resett switch .... Can it be problem?
@MacCoyzkie 3 жыл бұрын
@@nebula4554 not really. I'm guessing that the front io cables are faulty then, if your pc was working on the old case then the new case front io is not working assuming you correctly plug those little connectors right
@FobyXD 3 жыл бұрын
I'm having this problem now
@MacCoyzkie 3 жыл бұрын
@@nebula4554 that might just be the front io connections but you can try to jumpstart your pc to check if it's working
@ezkez1885 3 жыл бұрын
I had the hdmi plugged in the wrong bit thank u ur a life saver
@MacCoyzkie 3 жыл бұрын
glad to help, thank you too for the feedback
@sneakyrambo19 2 жыл бұрын
I've done all this it's all fully compatible, I've updated the bios and the cables are all correct any idea on why it's still not getting a signal connection?
@MacCoyzkie 2 жыл бұрын
i know its new but there are times that some parts are faulty still. rarely happens but its not impossible, since its newly build pc why not use Rma?
@buggyman286 3 жыл бұрын
Just left my pc at the shop and hopefully they’ll figure it out.
@jsmoothatp 3 жыл бұрын
So did they get it fixed or
@jsmoothatp 3 жыл бұрын
Sometimes they mess up another thing on purpose so you come back and spend more money
@buggyman286 3 жыл бұрын
Update: Just had a loose ram, since it was my first time building a pc, i didn’t slide it all the way through.
@jsmoothatp 3 жыл бұрын
@@buggyman286 me too I fixed it from loose ram stick and It was fine for 2 days then now it doesnt turn on
@mrsalierisendshisregards2490 3 жыл бұрын
During gameplay, my monitor suddenly turns off, and when i turn it on again, i got this no signal thing. I already tried cleaning the usb cables and plugging it on the right position, but its still a no signal to me.
@MacCoyzkie 3 жыл бұрын
if you see no lights, no fans running and no lights on keyboard and mouse that is a dead psu. Probably broke down because or might be it can't handle the pc parts. But if you see lights are on and fans running, it might be the Rams. Try reseating them, if still doesn't work try our cleaning method in this video kzfaq.info/get/bejne/fJOUf6V61NPLmI0.html
@MacCoyzkie 3 жыл бұрын
@Its Me i answered your question in your first comment
@rey93100 3 жыл бұрын
Today I had the same problem . I build my new pc 2 day's ago. Yesterday I was playing and everything was normal but today when I was playing suddenly black screen. I change my bios ,reinstall the nvidia drivers and nothing but when I take my graphics card off and plug the DP in motherboard everything works fine. So what's the problem, it could be the graphics card or the two 8pin cable's or maybe something else? Thank you.
@MacCoyzkie 3 жыл бұрын
@@rey93100 plugging in the monitor in the motherboard's dp means that your gpu was not detected. Plug your gpu back and remove the cmos battery for at least 5mins and place it back again. (do this while grounded and pc is not plugged in any power outlet) then try powering your pc back. This should turn off the integrated graphics and will look for the gpu instead, some motherboard auto detects but some don't, maybe yours doesn't. anyway if this still doesn't work you need to try your gpu with other pc. if problem persist it is the gpu if not maybe it is the motherboard and i guess that will be the time you need to bring it to the local shop where you got your pc from. They'll fix it for free since it's newly build but i guess it's a different story if you got your pc parts online
@rey93100 3 жыл бұрын
@@MacCoyzkie Brother thank you very much for your feedback but the problem was that I didn't connect GPU properly in PCI slot. I know it sounds dumb. I build a 2000 € machine by myself for first time and I couldn't put properly a 3080. So stupid 🙄. Thank you anyways ❤
@eliaspispala4034 2 жыл бұрын
I'm not sure if it is a compability issue since on pcpartpicker it says that some b550 motherboard's bios needs to be updated but on the box of my board it says that it specifically supports my cpu. I don't know what to do
@MacCoyzkie 2 жыл бұрын
The box basically informs you that it is compatible but some old stocks are not updated automatically since recent bios just got out. actually some pc stores update it themselves and some just don't care at all specially those online stores depending on the location where you are at. but before anything else, what are your pc specs?
@veissan Жыл бұрын
im a new builder and i just built this pc, it turns on but it still didnt work when i pluged the hdmi and i also tryed display port into the gpu. Since i just built the pc i tryed to go to bios setup like i always do but this time i cant get it to connect to my monitor my specs are i5 12400f and rx 6500 xt with the ASUS Prime H410M Help as sooon as you can
@MacCoyzkie Жыл бұрын
I don't think the cpu is compatible with the motherboard, you need to double check your parts if it'll work together in pcpartpicker.com/
@nexha. 3 жыл бұрын
Brother, when I first power on the PC no display output comes but when I press the reset button then display comes, I don't know why this is happening, please help me with this...
@MacCoyzkie 3 жыл бұрын
you need to check front panel io. the connection for the reset might be placed on the power on, that will cause boot loop at times. I suggest check your motherboard manual and see where the front panel connections should go
@MoreKnowledgeShorts 3 жыл бұрын
Hey there! I had the exact same problem there is actually a few cables at the bottom of the motherboard they are extremely small but they are important! They are usually labeled with such things as reset, power SW (switch), powerled and hddled the area they are in usually have text under it or around it where they are supposed to go, in this case you have put the power in the reset. Enjoy gaming! :)
@MacCoyzkie 3 жыл бұрын
@@MoreKnowledgeShorts totally agree
@lmkriah3025 3 жыл бұрын
Omg thank you so much did not know my cpu did not have integrated graphics so I Got to wait for my gpu to come in
@MacCoyzkie 3 жыл бұрын
no problem, glad i was able to help :)
@sanatani_sher_ Жыл бұрын
Hey bro I am your really big fan pls tell me I am also facing the same issue and I don't have integrated graphics card and also not graphics card installed ... Is this the problem which is making my pc no signal
@MacCoyzkie Жыл бұрын
if your cpu does not support integrated graphics and you don't have a graphics card then no display is inevitable.
@logan8721 2 жыл бұрын
I having the same issue.mobo is gigabyte x570 gaming x and cpu is ryzen 7 5700g . I checked the compatibility and saw it needed latest f35 bios and I flashed it using qflash using the tutorial provided at gigabyte website.still no luck...Any tips mate?? TIA
@MacCoyzkie 2 жыл бұрын
hmm that should work right away after installing the bios update AMD AGESA ComboV2 1.2.0.3 B for Ryzen 5000 G-Series processors support. Anyway i hope there was no power interruption during the bios update. Sorry bro i got no idea about this if ever it doesn't work, since you were able to update the board i don't think it is faulty.
@alickchung1401 3 жыл бұрын
I just got my new pc and it keeps saying no signal no matter what I do
@MacCoyzkie 3 жыл бұрын
if you tried the solutions here already and still doesn't work you might have a faulty component or a bios issue
@gabz_tv 3 жыл бұрын
thanks for the help, just found out the ryzen 5 3600 doesn’t come with a integrated graphics card. Welp gonna have to buy one 😂😅
@MacCoyzkie 3 жыл бұрын
no problem, glad i was able to help. I bet you're looking forward for a new gpu :D
@Castleromeo14 3 жыл бұрын
hey dude, mine turns on but it suddenly can't boot. It happened when I turned on HDR. Can you think of any potential fixes for it?
@MacCoyzkie 3 жыл бұрын
up until now there is no clear solution for this or maybe i just don't know yet. If i'm not mistaking there is a specific monitor cable for hdr to make it work
@tsukitohateru 3 жыл бұрын
I had a couple of power surge from the socket in my room. It was displaying output fine before. But after a couple of power surge on the second day, the monitor shows no signal. My monitor works fine as I connected it with my game console. But my PC was running. All the led and fans were running. But no displays coming out from both the graphics card and the motherboard with the integrated processor. Could it be that the parts are now fried?
@MacCoyzkie 3 жыл бұрын
if you're not using avr or ups, the first component that will take that surge is your power supply. Assuming your power supply is 80+ certified, it will save all other parts except for itself. Some psu survive some doesn't which sometimes brings low power draw causing pc to not boot at all.
@mushypandaa 3 жыл бұрын
You saved my life. Thank you so much
@MacCoyzkie 3 жыл бұрын
you're welcome! thank you too for the feedback
@MajorBall 3 жыл бұрын
What did you do
@mushypandaa 3 жыл бұрын
@@MajorBall it was actually that the RAM wasn’t in place properly. Had to take it out and back in.
@edmondcheong 3 жыл бұрын
Plugging the to the motherboard and not the graphic card was my problem amazing video
@MacCoyzkie 3 жыл бұрын
thank your for your feedback!
@bebbobablebe5952 6 ай бұрын
Put it in my grafic card first, didnt work yesterday - main didnt work either. Next day i tried the grafic card hdmi again and now it works xD so your vid kinda fixed it for me haha thanks
@MacCoyzkie 5 ай бұрын
no problem bro! glad the video help a bit hehe
@LimeJ0SH Жыл бұрын
my issue was the GPU had 1 of the psu wires not all the way in... thanks for the video tho bud, saving lives out here
@MacCoyzkie Жыл бұрын
no problem bro
@taylorbrock3389 3 жыл бұрын
Is there a way to use the graphics card and the motherboard together.
@MacCoyzkie 3 жыл бұрын
there is, while gpu is plugged you can go to bios and look for the integrated graphics, if your motherboard permits it, it can enable both the gpu and integrated graphics at the same time. Some motherboard will disable the other display option so just be careful and learn more about your motherboard features in that part
@juanberumen7723 3 жыл бұрын
I’m such a dumbass I had the graphicscard holes covered up u saved my life
@MacCoyzkie 3 жыл бұрын
It happens sometimes, but feels good when your pc starts working 😀
@ohok5616 3 жыл бұрын
Same
@Luhronn3x 3 жыл бұрын
Thank u so much I spent 3 hours trying to figure u this up
@MacCoyzkie 3 жыл бұрын
you're welcome
@thegoodboys9349 Жыл бұрын
Question please, what if the monitor keeps on saying no signal but if I remove the HDMI cable and press and hold the power button it will work. but I need to do it every time I open the PC. Hoping for your response, Thank you
@MacCoyzkie Жыл бұрын
if you are in windows 10 you might need gpu driver update and windows too. If you are in windows 11 then the o.s is the problem since win 11 has a lot of graphics issues
@chrisc6757 3 жыл бұрын
Thanks. Had it plug into wrong spot.
@MacCoyzkie 3 жыл бұрын
you're welcome and thanks for the feedback
@ascendance2295 3 жыл бұрын
I love you
@MacCoyzkie 3 жыл бұрын
i guess it worked for you too... thanks for the feedback
@paran4802 2 жыл бұрын
i just bought a new pc and it was running perfectly but after relocating it the monitor suddenly doesn't work, the cpu and fans are perfectly working fine but the monitor wont turn on and the light indicator is nowhere to be found.
@SavagexWolfZ 2 жыл бұрын
I have a question, I have a ASUS Radeon R9 Fury and it’s not showing up on my tv since I don’t have a monitor could it be because I’m using hdmi or do I need displayport
@MacCoyzkie 2 жыл бұрын
both should work (hdmi/dp) if its not working this is either the cables are faulty or the tv does not recognize the pc. We don't have evidence to confirm unless we try the pc with other monitor, if you could borrow from a friend to test it that'll be great. Usually most tv nowadays recognizes pc whether be in dp or hdmi. For now i suggest borrow a monitor to confirm it
@digita1wolf786 3 жыл бұрын
This video actually help I’m so happy
@MacCoyzkie 3 жыл бұрын
Thanks for the feedback!
@FunnyMinuteClip 9 ай бұрын
Sir which Psu you prefer for this build? Ryzen 3 3100 B450 tuf gaming Rx560 8x2 gb ram
@MacCoyzkie 9 ай бұрын
get a 550 watts 80+ cert. more info here kzfaq.info/get/bejne/Z8igZKWXnKeohqs.html if you want to know more about this
@FunnyMinuteClip 9 ай бұрын
Thank you sir 👍 GODBLESS
@MacCoyzkie 9 ай бұрын
@@FunnyMinuteClip
@Henryisvegan Жыл бұрын
Thank you! The issue I had was because of the 3rd reason haha. One second fix!
@MacCoyzkie Жыл бұрын
no problem bro!
@dannym1425 3 жыл бұрын
Tried everything and still not working. My specs are intel core i5-9400 CPU, Cooler Master Hyper 212 for CPU Cooler, Asus TUF B365M-PLUS gaming for motherboard, Kingston ValueRAM 16 GB DDR4, MSI GeForce GTX 1660 for GPU, NZXT H510 ATX for case, and Thermaltake Smart 700 W 80+ PSU. I was thinking perhaps the CPU and motherboard were not compatible but I wanted to confirm with you. Recently got this build early November and was working fine until now
@MacCoyzkie 3 жыл бұрын
your pc specs are nice and should work fine. If it was working before i think there might be a faulty part, i suggest bring it to the seller already and have them diagnose it
@ryanc7329 11 ай бұрын
Just wanted to share my solution here. My psu cable going from the psu to my white psu extension cable was slightly loose to where the gpu's fans would still power on but not have enough juice to output a display, i just had to make sure the cable was properly attached and it booted
@YTdontcareguy 2 жыл бұрын
i recommend doing the 3rd fix first like i knew it but my parents made that mistake so i couldn’t boot into the bios or safe mode but i didnt know safemode didnt work so i tryed it to delete smth black screen and i was screwes then i plugged the i saw the hdmi cable was wrong and i could boot into bios and safe mode and everything
@MacCoyzkie 2 жыл бұрын
awesome!
@bwb8845 Жыл бұрын
Hello, I have a question and i hope you can answer it, I bought used Monitor and i forgot to test it because the seller doesn't have HDMI, Transaction was done and i finished to build my pc, after i plug the used monitor it goes "no signal, both 2 HDMI port Not Detected, i already used my old HDMI and Bought new HDMI to make sure, but it doesn't work. But when i plug the new HDMI to my TV it works properly. I don't tried to use the displayport of used monitor because my motherboard doesn't have port connection for it. Btw the model of used monitor is ROG Strix XG248Q. Edit: I don't have GPU yet.
@MacCoyzkie Жыл бұрын
you need to try the monitor using a console or laptop to check if its working, if the results are the same you need to return that monitor to the seller and ask for refund
@goofyblocks 3 жыл бұрын
My pc was working yesterday and I shut it off my pc like I normally do and this morning it wasn't giving a video signal, the pc is still turning on but it won't give a video, I've tried everything and it won't work. (I didn't do bios update due to your warnings)
@MacCoyzkie 3 жыл бұрын
if it worked before you really don't need a bios update. This happened to one of my builds before and i re-seated the rams and everything went well. Try removing and placing back the rams, also double check the connections in everything
@starlord627 2 жыл бұрын
So I just built a pc and the monitor saying no signal from device. I don't have a graphics card. I thought all the CPU has integrated graphics but now I know my CPU don't have integrated graphics. So now I need to buy a graphics card. My question is, is a gt level graphics card ok to start my pc?? CPU : ryzen 7 3700x Mobo: asrock b450m/ac
@MacCoyzkie 2 жыл бұрын
yes there is no problem with that if ever you buy gt level gpu. I know gpu prices are so crazy expensive nowadays but that will do fine at the moment and just upgrade in the future
@starlord627 2 жыл бұрын
@@MacCoyzkie thank you so much my computer is working fine
@Electropus10 3 жыл бұрын
Thank you so much brother Love From India 💕💕💕💕
@MacCoyzkie 3 жыл бұрын
you're welcome bro! glad i was able to help! thank you too for the feedback
@Crazggs 2 жыл бұрын
Hello I need help everything in my pc works and runs I just don’t get display I’m pretty sure I need to update bios with a first gen cpu but I don’t have money to get one
@MacCoyzkie 2 жыл бұрын
what are your pc specs?
@tsuk2430 3 жыл бұрын
built a new pc specs msi x570 gaming edge wifi mb rx580 3.2gz 16gb kit corsair nzxt h510 ryzen 7 2700 everything will turn on fine expect my graphics card i flashed the bios and my graphics card was fine on my old system i even tried a old 970 i used to use still doesn’t work the fans try to move and stop and won’t display output i short circuited the board changed ram around everything i need a solution please and the ez debug light is on which i’m assuming isn’t detecting the GPU idk what to do it’s updated
@MacCoyzkie 3 жыл бұрын
this has to do with your motherboard bios then, if this is a new pc i suggest have a local tech store update it for you. I hope you finish the bios flash procedure without powering off anything, it could really mess things up.
@tsuk2430 3 жыл бұрын
Mac Coyzkie you see i flashed my bios too i got a usb went on the website and did that i went to the back plugged the USB in the spot it said “flash bios” and clicked the button so then it blinked the leds to show that the bios is being flashed did this for about 10-20mins and then it stopped flashing turned off and turned back on (because it was finished) my gpu fans still won’t turn on or they try to and my HDMI doesn’t work should i just take it back to best buy at this point ? i checked all my wiring just everything besides the GPU will not power on and my EZ debug light is showing that it’s not detecting it like i said so i dunno what do u think and thank you for responding and making videos i’m definitely subbing❤️❤️❤️
@MacCoyzkie 3 жыл бұрын
@@tsuk2430 no problem, glad i can help. And yes you need to take that back to best buy and don't tell them anything about flashing the bios because they will blame it to you and you might not get any replacement. Just tell them it just doesn't work, ask them to fix it for you, if they can't fix it they'll replace it for sure since it's new
@xTheRose Жыл бұрын
Hi i need some help, I‘ve bought a rx 6800 and uninstalled my old drivers like i did in your video (gtx 1050ti) and when I boot up the card i always get „no monitor signal“ what do i need to do? I updated Bios and everything
@MacCoyzkie Жыл бұрын
you only update bios if the cpu does not work with it, your bios is fine. for now try the 1050ti again, then DDU the driver kzfaq.info/get/bejne/idx5fcuU3cC4o3U.html normal uninstallation does not work at times so do the DDU. after that shut down the pc, remove the 1050ti then plug the 6800 then clear cmos, here's how to clear cmos kzfaq.info/get/bejne/iZ-YrKiBuay2YWQ.html after that turn on the pc and see how it goes.
@mohammadaminmohammadi4271 Жыл бұрын
I have the same issue and dont have any signal on monitor i check the site and says that my motherboard needs an bios update but another thing is my Dram light is on too i thought its my ram problem i try one ram but it doesn’t work again so can you just tell me the problem is my motherboard bios version or my rams?
@MacCoyzkie Жыл бұрын
you need to do the bios update first before we can conclude the other things. if really want to check your ram sticks have your friend test it in their pc
@tysontran607 Жыл бұрын
Hi I am using ryzen 5 5600x and waiting for the graphic cards price to drop. In the mean time, how can i connect to the monitor? Im using the b550 mobo it doesnt support the big port for monitor like old mobo.
@MacCoyzkie Жыл бұрын
5600x does not support integrated graphics so basically without gpu the pc is unusable.
@ericr7303 3 жыл бұрын
Hi there I recently got a msi gaming x trio 3070 and I had it plugged in and working fine for a couple of hours. Eventually my computer went to sleep after I was inactive on my computer for 30 minutes as I have it set to go to sleep automatically. After my computer went to sleep I tried to turn it back on and I could no longer get a display on the display ports or hdmi of the 3070, but then I plug in my old gpu 1060 and everything works perfectly fine... not sure whats wrong would love some help. Also the 3070 still lights up and everything but I just can't get a signal on it to my monitors.
@MacCoyzkie 3 жыл бұрын
if the 1060 works fine i guess there might be something wrong with the 3070, if you have spare pc at home try it out there, if problem is the same i suggest use Rma already, get a replacement or something
SOFIADELMONSTRO
Рет қаралды 31 МЛН
TechLunar
Рет қаралды 94 М.
Mike's unboxing, reviews and how to
Рет қаралды 303 М.
Кик Обзор
Рет қаралды 50 М.