This product has been a long time coming. Finally CG has come out with their own true ceramic coating.

I’m 17 and want to get into detailing. Watching your videos gives me motivation !!

You guys make the most amazing car care products. And you do a great job at showing how to apply them. I can’t wait until you guys get this back in stock!

Man that Land Cruiser in the back 😍

This actually seems like a simple application process. Thank you!

I honestly cant wait till i start detailing cars in the near future

By far the easiest to work with. Remember what he said, a little goes a long way. Appreciate the info!

So, my wife just bought a 2023 Mini Cooper we decided to decline their ceramic coating because it is the in my opinion excessive ($2300), after seeing this, I just would like to know how to properly layer this product. 1- Wash with clean slate 2- Clay bar it 3- Carbon Force (wait 12 hours) 4- HydroSlick (wait 3 hours) 5- Whitelight 6- Jet Seal 7- White paste wax Would that be appropriate order? Or should I put carbon force last?

Great product as always from CG! Have been only using chemical guys since I discovered their products. Glad they continue to expand their product line.

Gotta buy it. Make a video on it as well just like I did with a few other products. CG is winning.

Looking to apply this to my new Ioniq 5 but have a question. I don’t have a garage but rather a car port and I’m concerned about pollen in the air. Will small airborne debris be a problem during the curing process or will they be repelled before it’s fully cured?

Annnnnnddddd now I have to give Chemical Guys more money 😂 When will this product be hitting Amazon?

Hi guys, looks amazing! Can't wait to try it. Quick question: if I want to layer it up with a glaze, sealant and wax, do I also have to wait 12 hours to let the ceramic coating cure?Thanks

Can you guys also make a video for maintenance wash after applying this product?

Just ordered mine... waiting for it to ship. Can't wait to try it.

I’m a year late to the party but I have a question. When layering do you need to wait for each layer to cure the 12-24 hours before adding additional coats? Also what is the max amount of layers recommended?

I bought it, can’t wait to try it!

Is it only safe to apply this in an indoor controlled environment?

What if you are using this product for a client and aren’t able to leave the car in a controlled environment for 12 hours to cure? Any suggestions? Cheers

1st from Puerto Rico 👍🇵🇷

2 Questions ChemGuys: What percentage would you say you correct the paint to, via polishing, before ceramic.... Like 90%? Surely do not strive for 100%? Secondly, what is the actual difference, chemically, between this product and the products that cost 5x more?

Tried it for the first time today. Very pleased with the product.

Finally a true ceramic coating but I’m afraid to ruin my paint even tho looks so easy to use, is this a really diy product?

After polishing step, do you then wipe down with wipe out? Then carbon force? Thanks for any advice been trying to find answer in many of the videos!

What kind of wipe do I need after doing all the steps to apply the ceramic? Thanks…

If my vehicles are outside in a not controlled environment is it recommended to apply this product in that situation? Also can it be applied to plastic trim? Thank you

How many coats is too many? I have a whole bottle of this stuff just to do my new wheels, should I just keep doing coats until the bottle is gone?

Waiting for this product on Amazon.... CG product are always best 👍👍

So I just got the carbon force but have some questions on what you guys recommend for me to do. I have a 2022 Toyota Camry in black I got back in June wash it once a week with blacklight wash with the foam cannon and Diablo wheel cleaner and even finish it off with V07 detail spray for water spots never waxed the car so what do your guys recommend to clay and wax? Use wipe out? I have no idea please help thanks..

After vehicle is washed, what polish do I need to use, you said in video to polish before adding carbon force ? then do I put the glaze, sealant and wax, then the Carbon Force. CG products are just AMAZING!

Sheds water like butter 👌 11:53

When will this be for sale on the website?

I need instructions on what to apply after my ceramic coating! Can I use jet seal, wet mirror finish and or lava wax after applying carbon force?

If u don't have a controlled environment can or should u still do it? Also u don't need infrared lights for this 2 cure right?

Can I re-use the little applicator sponge, or do i have to have a bunch of them to put multiple coats on a large suv? I assume the sponge will be crispy when it dries and may scratch if I reuse it. Apologies if this was already answered.

Can we use this on vinyl wrap? Also with all these steps?

Can you add the second layer right away or do you have to wait 12 hours. Thank you

I didn't see the answer to roughly how many cars or will this do a full size F-150 and if you don't use the full bottle how long of a shelf life is expected before it hardens in jar.

Looks great, that little bottle for the whole vehicle? Seems like not enough and the price I think is ridiculously high.

Can the coating be re applied? 1 coat one day and another the next day or week ?

I have a new Camaro and am constantly washing away water spots from after rain. Does ceramic coating repell water spots??

Can i also use this on chrome details on my car?

I'm starting to use this on my new Tesla Model 3 that has a pearl white paint (like tons of others!) and I'm finding it *impossible* to see any indication of hazing or drying to clue me as to when to level the coating. I've used from 30 seconds to 2 minutes (garage is about 55 degrees, so on the cool side) but I can't see *any* difference in the result. Suggestions?

Sweet! What if I clayed, compounded, polished, glazed, sealed and waxed it a week or a month ago? Can you wash it and carbon force it or do you need to clay it and repolish it again?

once you finish applying, can you go out and drive or does it actually need to sit inside for 12hrs?

Can't wait to purchase this as I'm a massive CG fan. However, I do have a question. Can this be applied over black reflective vehicle livery?

If your vehicle is brand new do you have to clay bar and polish?

Why don't your dealers share the information on application

Hey can I put on a second layer a couple weeks later?

What wax would you recommend using after putting ceramic on?

Can I use the white light and white wax after applying this ceramic?

Just ordered! Will be applying to a brand new wrx, you guys still recommend polishing and clay bar?

I bought the Carbon force kit on one of your store.... I was told the steps are Wash with Clean slate, clay bar, polish with V36, wipe out cleanser spray and then carbon force coating. My Question is. If I used the wipe out would that strip the paint V36 polish? Car is brand new.

Does washing the car with clean slate remove it or just polishing the car remove it? Also what kinda pressure washer do you use at the shop?

I want to ceramic coat my entire car using carbon force, should I still use jet seal after in order to get UV protection ? Or will the carbon force protect against UV?

How long do you need to wait to see the raimbow effect?

If you want to layer the product and add a second coat of Carbon Force, how long do you need to wait? Can it be applied immediately after buffing, or do you need to wait 3-12 hours?

What can I use to remove hard water stains on car windows

How much is the cost of that ceramic coating.

GOLF R! 🤘🔥

My truck is about two months old. Do I still need to clay bar or just use clean slate?

No alcohol spray after the wax? Just wash, clay bar, wax, and than ceramic?

I don't really have a controlled environment. I dont have a garage and i have to park in my driveway. is this a problem for this product?

When is this product coming to Canada ?

So once waiting the 12-24 hrs after applying the ceramic coat, then you can follow up with your hydro wax?

Hey man I just watched ur other videos and I saw the other guy used hydrocharge/slick after washing/polishing. Im just confused if I should just use carbon force instead of the hydro series?

I have tundra crewmax and a highlander will one bottle do both ?

Quick question I already polished,hydro charge,hydroslick ,glazed,jet seal , and waxed car ,can I add this on top of all that or do I need to strip everything then do it all over? And if I do need to strip every thing off what goes first in the flow chart?

After using the clay. What type of polish did you use?

Do you have to add more coating to the applicator pad after each body panel?

can you use this on carbon fiber or if not what would you recommend to keep the carbon fiber in perfect condition

What happens if you just put the coating on top of existing spray ceramic waxes instead of going thru the whole clay bar and cleaning process??

How long does this last?

How many cars can one bottle do if applied once. And can one coating last up to 5 years or do I have to layer it to get 5 years of protection?

I have a factory stripped car. Does this product go ever the stripes or do they need to be taped off?

Could be applied over glaze?

I gotta try this!

I wanna see this vs the hydro charge&hydro slick

Can this also be applied to plastic trim?

Hi, how many average uses does each bottle have?

If I have a layer of ceramic coat on the car can I apply another coat of this product

I’m planing to use jet seal, ceramic coating, and h07 glossy liquid wax at same time. What sequence do I need to do them in? Ceramic coating first, then jet seal immediately? Or do I wait three hour then do jet seal and liquid wax

If I don’t finish coating the carbon force in one day and I am on my last applicator sponge can I still use that sponge if I were to wash them and use them a day later?

Do I have to polish the car after claying to apply the ceramic coating?

Full detail of a car cost about Two hundred dollars And they charge about $700 to ceramic And the ceramic code is the simplest part of it

Can this be applied with the vehicle being outside?

Is there a way to strip the coating? I messed up and left it on to long and now there are streaks.

Question! Can carbon force go onto a gel coated boat?

Can you apply it on non glossy exterior plastic trim? If not, what is a good protector for non glossy plastic trim?

How soon after I polish my vehicle can this be applied?

Amazing!👊

Can this be used on carbon fiber?

Can this product be followed by the flow chart?

How do I prep a brand new car, is clay bar still necessary

How do you prep class for ceramic coating?

So if it’s a brand new vehicle do you still need to polish?

At 7:31 the guys mentions the RAINBOW effect. That won't go away. I'm getting really worried!! HELP!!

okay so if i want to use the blue hyper wax do i use it before or after the ceramic coating ?

Can we do ceramic coating outdoor In the sun thank you so I can buy my bottle from you guys thank you

What do you use before applying to strip off anything g like wax or polish if you polished it before it.