NEW PRODUCT - Signal Controller from Model Train Technology

Рет қаралды 71,403

3 жыл бұрын

Model Train Technology CHANNEL:
kzfaq.info/love/ICo-pj4Y5lFv_VnaNalbvg
This is a New Product introduction video showing the features and capabilities of the LED and FIBER light Block Signal Controller. The Signal Controller is designed to work directly with our Precision Detector(tm) and has a built in DCC decoder so it can be automatically synchronized with Turnouts. You don't need DCC but if you want to use it, you can It can control and flash Crossing Gate Flasher as well.
@ModelTrainTechnology
This is not a complex CTC system but rather a very simple and elegant way to add Signaling Animation to your layout - fast, economically and easily.
www.ModelTrainTechnology.com
Support@ModelTrainTechnology.com
Google: "ModelTrainMan"

Пікірлер: 139

@vincenthuying98 3 жыл бұрын

Very cool system, definitely will put your system both on my ‘hard disk’ and wishlist! Thanks for sharing.

@UKRailsandMore 3 жыл бұрын

Interesting update Jim, thanks for sharing and all the best, Paul

@amcaljosh 3 жыл бұрын

This is actually really cool. The electrical box actually works in here.

@gregbowen617 3 жыл бұрын

This system is pure genius - as someone who wants to add signals (eventually) to my layout, you have solved many, many issues for me!!! Cheers from Melbourne, Australia

@HumancityJunction 3 жыл бұрын

This would work really well for a modular layout. This looks really great.

@Corvairsrcooler 3 жыл бұрын

Really cool. What a great product. Rich

@ModelTrainTechnology 3 жыл бұрын

Thanks!!

@bruceyoung1343 3 жыл бұрын

Awsome. A definite add on to my layout

@ModelTrainTechnology 3 жыл бұрын

Cool, thanks!

@KBoege 3 жыл бұрын

This is just plain brilliant. Thank you for developing this system.

@ModelTrainTechnology 3 жыл бұрын

Glad you like it!

@JF-lt5zc 3 жыл бұрын

Really cool. And truly affordable. Nicely done.

@ModelTrainTechnology 3 жыл бұрын

Thanks!!

@wimbletrain 3 жыл бұрын

Great product and easy to use!

@ModelTrainTechnology 3 жыл бұрын

Glad you like it!

@WestCoastRails 3 жыл бұрын

Fan-Friggin-Tastic!!!! You had me at easy to set up. I went immediately to your website. I was looking for a way to add Signals to my FreeMo module...looks like I found my solution.

@ModelTrainTechnology 3 жыл бұрын

LOL! thank you! More cool things in the months to come.

@wabisabi6875 3 ай бұрын

Brilliant!

@ModelTrainTechnology 3 ай бұрын

Thanks!

@davidcurtis5398 3 жыл бұрын

If I can afford this, I will be using it on my new road. I have no power through the track as I have all battery powered engines and maybe I will have this kind of signaling for the road. Thanks so very much. This looks like a very simple but interesting product. I am subscribed now.

@steverudder3321 3 жыл бұрын

WOW! This sure would have come in handy 47 years ago when I used to have an HO scale setup. I installed a momentary switch under the track where the weight of the train would trip a traffic signal on my layout. This is far more advanced!👍 Just my opinion sir, but you may benefit from an extra person running the camera for you.👍Very impressive signal system!

@ModelTrainTechnology 3 жыл бұрын

thanks for the feedback - and advice on the camera. Who would have thought we would have needed THESE skills as well!!??

@arthursogaugelioneltrains5744 3 жыл бұрын

Thanks for sharing🚂🚞🚞🚞🚞

@ModelTrainTechnology 3 жыл бұрын

Thanks for watching. Make sure to join the newsletter to be updated on O Scale product releases. More on the way! www.ModelTrainTechnology.com

@jasonsmith6408 2 жыл бұрын

Very nice set up

@ModelTrainTechnology 2 жыл бұрын

I'm glad you like it

@DuncSargentsKarstValleyRR 3 жыл бұрын

Hey, that's really cool! --dunc

@ModelTrainTechnology 3 жыл бұрын

Thanks!

@Miertreg1 3 жыл бұрын

Nice video ! Greetings Gert

@ModelTrainTechnology 3 жыл бұрын

Thanks for visiting

@seanpacificrailroad3700 2 жыл бұрын

This is great I’ve been considering putting a few signals on my kato nscale layout I’m really interested thanks for the video I need to look more into this 👍

@ModelTrainTechnology 2 жыл бұрын

Glad it was helpful!

@seanpacificrailroad3700 2 жыл бұрын

@@ModelTrainTechnology thanks 🙏😀

@MMRails 3 жыл бұрын

I’m very interested in this system. I’m shopping for some crossing signals. Right now I’m leaning towards Walthers for price. I’d love moving gates but I think I’ll start slow. Flashing red lights only. -Mark

@toddwright11 3 жыл бұрын

These could also be used to control signals on the 7.5 inch scale trains.... very nice design

@ModelTrainTechnology 3 жыл бұрын

That would be cool!

@SantaFeBob 3 жыл бұрын

This is a very nice signal system. I did not see it listed on your website. When will the part numbers and costs be available so I can begin budgeting for it? Thank you for taking the time to develop these outstanding items.

@ModelTrainTechnology 3 жыл бұрын

All the pricing and parts info are in the Store. Once there, you can select the Detector Category for all the relevant info. Thx!

@butterpupper 2 жыл бұрын

This is awesome! its such a simple solution for signaling! but i have a question, have you tried making the PRR position signals?

@ModelTrainTechnology 2 жыл бұрын

Yes, we have PRR signals and the matching controller!!

@tucorameriz3538 3 жыл бұрын

Signal sequence should be red(stop)-flashing yellow(advanced approach)-yellow(approach)-green(clear). Cool product besides that!

@ModelTrainTechnology 3 жыл бұрын

The Signal Controller has EXACTLY that option plus a few extras. :)

@tonverkleij6491 3 жыл бұрын

Is this beautifull system also able to control the trains in the block, making them run slower and stop for a red sign? That would be fantastic!

@ModelTrainTechnology 3 жыл бұрын

Controlling trains add a lot of potential complexity. You really need a computer hook up to do that.

@michaelmurray597 2 жыл бұрын

That is slick! Do you have H2 signals?

@ModelTrainTechnology 2 жыл бұрын

H2 and other Searchlight single light styles are coming in January 2022.

@JSGregg 3 жыл бұрын

Cool! So do you design and test these products in-house? I'm gonna have a go at designing all the electronics on a layout I'm planning. Thanks for the content!

@ModelTrainTechnology 3 жыл бұрын

Yes, everything is design, assembled and testing In our workshop in Orlando, FL.

@JSGregg 3 жыл бұрын

That's pretty cool. Sounds like working there would be a dream, haha

@tonverkleij6491 2 жыл бұрын

Very nice and wellthought system! What I specially like is it's standalone functionality which makes it free from dcc detection and blocking systems. In this video you have the signal controller on the top of the table, but I presume you can put in underneath as well to have it out of sight? One other question, in case of double tracks with trains running opposite directions, will a train running from left to right interfere with the detector for the train running right to left?

@ModelTrainTechnology 2 жыл бұрын

Thank you for the feedback. Yes, the Signal Controller should be mounted under the layout. You can use the magnet ic mounting bracket for easy attachment and removal. The detector can not overcome physics so if another train blocks the view it will not see the other train. You wont get a false positive - but it will be "blind". A better solution is either under track mounitng or a sensor on either side.

@tonverkleij6491 2 жыл бұрын

@@ModelTrainTechnology Ah thank you, I can understand. A solution would be to place the detectors in the space between the tracks in a side to side configuration so that the detectors do not interfere. Is this system available in Europe, and in the Netherlands specifically?

@ModelTrainTechnology 2 жыл бұрын

Yes, your approach to put them side by side is a good one. You can also put them on opposite sides of the two tracks facing each other because you san set the detect zone to be VERY precise to only pick up the near train. We sell direct to customers and make regular shipments to Europe though you would be the first from the Netherlands.

@jasonboche 2 жыл бұрын

I have another question. I believe I heard in one of the videos that current limiting resistors are not needed for LEDs because there are resistors built into the control module that powers the signals. What size resistors are these? I really enjoy looking at your product and I will likely end up making a purchase of the starter kit that I was just notified of by Model Railroader Magazine. I model in HO scale.

@ModelTrainTechnology 2 жыл бұрын

Just to be clear, LEDs need a resistor somewhere, and yes we have them inside both the Animation Controller and the Signal Controller. Thus, you dont' have to ADD another one.

@jacjac5761 3 жыл бұрын

Jim can you signal control have the ability to line a switch. I'm trying to build an automatic switching for trains to to pass while another train is on the main. I know it's a little crazy but I have CTI automated system but I'm trying to use a basic approach.

@ModelTrainTechnology 3 жыл бұрын

The Signal Controller is the Slave to a triggering system, whether that is our Precision Detector, a DCC packet, a simple switch or another controller system. Its job is to change the lights. The Precision Detector is a trigger that can drive the Signal Controller and/or a relay system, that in turn could drive your switch behavior. We have tested with the Tortoise system with a pair of relays for example, and that works. There should be a way to make the CTI system accept a open drain low signal but I don't have one to play with. We will be testing the Atlas signaling system next week.

@jasonboche 3 жыл бұрын

I just got the email for this system tonight form Model Railroader Magazine and I'm very interested. I've been wanting signaling for my HO scale railroad for a long time but it is not blocked and I think my layout is too small to bother with sophisticated block detection in the rails. I have a question about the programmable aspects. Do they maintain their settings when power is cut? ie. Each time I turn the layout on, do I have to configure all of the controllers under the layout?

@ModelTrainTechnology 3 жыл бұрын

The configuration options are saved immediately and automatically so you never have to reprogram after turning the layout off. Our system is design so that even smaller layouts look like they have sophisticated blocking and signaling without all the fuss (and expense).

@jaug02 3 жыл бұрын

Nice system, any plans making sensors for large scale 1:20.3 trains?

@ModelTrainTechnology 3 жыл бұрын

G Scale (1:22.5) is next for sensors, controllers for outside, Signals and Flashers. Late summer.

@jaug02 3 жыл бұрын

@@ModelTrainTechnology just sent your company an email asking about a possible unit to control stall motor switch machines that I use in my 2 aspect semaphore signals

@ModelTrainTechnology 3 жыл бұрын

There is a diagram on the product page on how to do this: modeltraintechnology.com/product/precision-side-of-track-detector/

@MRrwmac Жыл бұрын

Jim, I just came accross this while searching for a cheap way to get gatem lights and signal bell for my little HO christmas tree setup i made. Dont know if you finished the gate and bell yet, but sure am impressed. How much? I’ll go try and find out. Thanks, and Congratulations!

@ModelTrainTechnology Жыл бұрын

Our online store is the best place to locate items. We just released the G scale gate, N and HO on the way... www.modeltraintechnology.com/buy

@lyctus 3 жыл бұрын

Really interested in this product. I am building an N gauge layout and thinking about signal options.I like the simplicity of this product. Look forward to pricing and shipping to Australia.

@ModelTrainTechnology 3 жыл бұрын

Pricing is in the store. Shipping to Australia is usually about $20-25 depending on the number of items. We ship USPS International as the only rationally priced option, although it takes 3 weeks.

@thomaso5176 3 жыл бұрын

What combination would you use for a crossing light, to have it come on before the train arrives at the crossing, whether it comes from one direction or the other?

@ModelTrainTechnology 3 жыл бұрын

Two Precision Detectors, one for the West and one for the East approach, One Signal controller, One power Module. There is a Starter Kit that has one of each; add an additional Precision Detector to that. Then hook up a Railroad Crossing flasher of your choice that uses 3-5v LEDs.

@geraldjones2278 3 жыл бұрын

Seems to work very well but you only demonstrated how it works on a single-track system. How would this work with dual tracks with trains running in both directions?

@ModelTrainTechnology 3 жыл бұрын

That's really a question having another set of our Precision Detector looking at the train on the second track. Since our detectors can distinguish between the two tracks, it's simply a matter of hooking up a Signal controller for the other track.

@geraldjones2278 3 жыл бұрын

@@ModelTrainTechnology So the train on the track opposite the sensor would not affect the sensor when it passed?

@ModelTrainTechnology 3 жыл бұрын

The sensor cannot see through objects so the sensors have to be mounted on opposite sides of the track BUT, each sensor can be set to only see the track closest to it to a precision of 1mm within a 150mm range. Thus, it would see the near train but not the far train. Just for clarity, the other mode is to have it see ANY train in its viewing range. Check out this video for more on the precision sensor: kzfaq.info/get/bejne/bN-BeMWr0NW5Y3k.html

@peteengard9966 2 жыл бұрын

How about some HO position light heads for us slobbering PRR fans?

@ModelTrainTechnology 2 жыл бұрын

We have these - in several variations!! Check out more video and our Store site. Type PRR in the search box.

@NothusDeusVagus Жыл бұрын

A fine product and an equally fine presentation. Thankyou. - If I may ask a question... Instead of just altering the light colour of the signal, as the train is detected by the sensor, would that controller in conjunction with the sensor, be able to cut off power to an isolated section of track, whether that is at a station/depot or within a yard etc.. and thereby stop the train at that point for a set/variable amount of time? This would effecively create the illusion that the train has stopped to offload passengers/cargo or if that point is out of sight and so prodviding the illusion of the train being enroute to or from a far-off destination. - sub question, For what length of time could that interuption be implemented upon the track? Seconds, Minutes? Hours? Could one also use this sensor/controller combination to activate turn out switches?

@ModelTrainTechnology Жыл бұрын

Yes, we have many customers doing just that! Use the DPDT Precision Detector relay for the job.

@martinpattison1567 3 жыл бұрын

That is a great idea, but how would a Terminus Station start single work? Martin. (Thailand)

@ModelTrainTechnology 3 жыл бұрын

can you explain more, im not quite sure what you are asking.

@martinpattison1567 3 жыл бұрын

@@ModelTrainTechnology That should have been a start Signal at a Terminus Station. Would it have to be switched manually?

@ModelTrainTechnology 3 жыл бұрын

If I get this, the block signal AND Sensor are ahead of the parked train in the station. It should show Red until the train is cleared to depart but, because the train is not in front of the sensor it shows green. ok so far. You can add a single SPST toggle switch to the input side of the Signal Controller to make it think its tripped. Think of it as a HOLD RED switch. To clear the train you flip the switch so that the signal goes to green and the circuit is now dependent upon the detector. The train leaves the station and in a short distance reaches the sensor - which NOW turns red on its own (which is should since its in the next block) - and the regular sequencing begins.

@martinpattison1567 3 жыл бұрын

@@ModelTrainTechnology Thank you for your reply.

@richardcolemanjr3749 3 жыл бұрын

Will it work on the Atlas system using the double head cantilever towers?

@ModelTrainTechnology 3 жыл бұрын

According to their documentation the have a Din pin. Digital in, It doesn't say whether it is looking for a HIGH or LOW signal. We'll order one and find out.

@bigskypeach406 3 жыл бұрын

Any plans for a single aspect searchlight signal in N scale?

@ModelTrainTechnology 3 жыл бұрын

Yes, later this summer.

@mikeduncan3339 8 ай бұрын

I have 4 ho scale tracks with a signal bridge will I need a set for each track signal

@ModelTrainTechnology 7 ай бұрын

Yes, the signal, controller and Precision Detector work together as the three components.

@kirkshorter3875 Жыл бұрын

I am sure it will, but will this work with a Digitrax System? I say I'm sure since it appears to be on it's own system. Does this detect on one track only? I usually have a multiple tracks I run with as well.

@ModelTrainTechnology Жыл бұрын

The Precision Detector "Trackside" can detect precisely either one parallel track or both depending on how you set it. The NANO PD is under the rail so obviously only one track. Our detecter signal is a digital LOW. It is not compatible with Digitrax which is looking for 5v+. We are working on a LOCONET Sensor hub which would allow our sensor to interface with almost anything.

@kirkshorter3875 Жыл бұрын

@Model Train Technology Thank You!

@biloxiflee 3 жыл бұрын

You showed when a train would trip the sensor, If a train was entering a block, and was either slow or say stopped in a block or passing siding, once the train was fully in the block beyond the sensor, it would go green again. How do you detect a train is still in a block? The sensors look great, The block signals look great, but is there logic for actual prototypical operations or is it just for cute visual display? Thanks.

@ModelTrainTechnology 3 жыл бұрын

Thank you for the feedback and questions. The way to cover a block completely is with multiple sensors tied together. The distance between them should be the shortest train minus 1 inch. If you really want full block coverage then you would need to block all the sections of your layout and use current detection. For an existing layout that is not practical. As mentioned on the product page and in the documentation, this is not meant to be a prototypical full block CTC control but rather a very good simulation for a fraction of the cost, time and effort. A Prototypical signaling system requires a computer, programming and lots of time and patience.

@biloxiflee 3 жыл бұрын

@@ModelTrainTechnology Thank You. When the signals are tripped, is it using a digital signal of a voltage drop or gain, or is it an analog signal like an IR detector? I may consider using these with a computer or arduino or pi monitoring the outputs and programming logic for pairs of them. Thanks again.

@ModelTrainTechnology 3 жыл бұрын

@@biloxiflee The Precision Sensor signal output is an Open Drain LOW digital signal.

@PKCrouse 3 жыл бұрын

@@ModelTrainTechnology Just to clarify for a block that is multiple train lengths long, are you saying multiple sensors can be connected to a single controller, and that as along as at least one of the sensors detects the train somewhere in the block, the signal aspect will remain red?

@ModelTrainTechnology 3 жыл бұрын

@@PKCrouse Exactly!

@michaelmorgan7893 Жыл бұрын

Will this detector work with the Atlas N scale signals, and can it be used with DC? (All I use is DC in all my trackage)

@ModelTrainTechnology Жыл бұрын

It doesn't matter whether you run DC or DCC, we don't touch track voltages. Yes, Atlas N Scale signals will work with our Signal Controller.

@michaelmorgan7893 Жыл бұрын

@@ModelTrainTechnology that's great. I'm also planning two crossovers between Main #1 and Main #2, and a few passing sidings. Figuring out the signalling on that will be a nightmare as well.

@user-cy6mw8vk4v 7 ай бұрын

I model in N Scale and have 2 questions First, is the detection system infrared or based on a light source. Secondly, can I use the same signal box circuit to control 2 led signals, one on each end of the track block.

@ModelTrainTechnology 7 ай бұрын

"Infrared" is a wavelength of light. "Infrared" detectors commonly used in Model Railroading are almost 99% reflective - that is they measure the amount of light bounced back (or interrupted)by an object. This type is very susceptible to changed in ambient light, and thus, are problematic. Our detectors do use invisible light but they measure distance, not reflective light and thus can be used outside, inside, in a completely darkened tunnel and they still work flawlessly. Yes, our Signal Controllers can power multiple Block signals simultaneously.

@ronvierling6537 3 жыл бұрын

How does it work on the second track for detection

@ModelTrainTechnology 3 жыл бұрын

This is a repeat comment but the sensor has two modes: a wide range that covers both tracks - so ANY train trips the sensor. Then there is a narrow detect band that can be positioned anywhere within the 5.5" total range. OF course if you are trying to detect a second track and the near train blocks the sensors view the of course the far track won't be detected. That's physics.

@jontaylor6068 3 жыл бұрын

Can you show how to hook it in dcc?

@ModelTrainTechnology 3 жыл бұрын

Look for an upcoming video. I the meantime, all you do is hook the DCC rails to the two power inputs of the Signal Controller. That powers it and connects the DCC signal. Now give the Signal Controller an address by pushing the select button and using the switch command just as you do with DCC switches. Thrown is then "tripped" and closed is "unoccupied. Or use an existing switch address and the Signal Controller will indicate closed or thrown in sync with the switch.

@irishsixtysixfanGbrf66739 3 жыл бұрын

What about using a section block where you get three signals where the three signals will show a double yellow a single yellow and a red as UK and Irish signalling is is operated by the three aspect signalling

@ModelTrainTechnology 3 жыл бұрын

Can you send me some more information? email links to support@ModelTrainTechnology.com

@irishsixtysixfanGbrf66739 3 жыл бұрын

@@ModelTrainTechnology on approach to the signal there is 3 signals all 1 mile apart on approach to the first 3 mile block the first signal will show a two yellow aspect top over bottom on seeing this the driver /engineer slows down on approach to the second signal it will show one single yellow indicating that the next signal will be at danger and the driver will proceed under the track speed limit to the next signal and will bring the train to a complete stop or the signal may step up from red to a yellow or green.

@irishsixtysixfanGbrf66739 3 жыл бұрын

@@ModelTrainTechnology live.dovetailgames.com/live/train-sim-world/articles/article/great-western-express-signalling-a-brief-introduction here is what the signals look like

@irishsixtysixfanGbrf66739 3 жыл бұрын

@@ModelTrainTechnology trains are seperated by distance of up to two signal lengths a distance of two miles which are called distance blocks when a train in front enters into the block the following train is held back at the either a single yellow or double blinking yellow meaning the train ahead hasn't cleared its block and slow down and be prepared to stop at the next signal.

@irishsixtysixfanGbrf66739 3 жыл бұрын

@@ModelTrainTechnology there is also a term called a double over where a signal will show a double aspect meaning that if two signals are very close together it will show a green aspect over a yellow or yellow over red meaning that the top aspect colour is the current signal displayed and the bottom is the proceeding signal aspect

@skipduld8948 2 жыл бұрын

U SAID IT WORKS WITH DCC. WILL IT WORK WITH NCE ? WHAT PERVENTS THE TRAIN FROM MOVING FWD. IN A RED SIGNAL. OR IS IT JUST A SIGNAL SHOWING U THAT ANOTHER TRAIN IS ON THE SAME TRACK ?

@ModelTrainTechnology 2 жыл бұрын

Yes, it will work with any DCC system including NCE. This is not a train control system. Rather it reports the train but you control the train.

@larrymeyer4766 3 жыл бұрын

why not mount the controller under the layout?

@rod.h8064 3 жыл бұрын

demo board, makes it easy to point at components

@charlesdail882 2 жыл бұрын

Where do you sell thes

@ModelTrainTechnology 2 жыл бұрын

We sell direct. visit www.ModelTrainTechnology.com/buy

@elleryparsons5766 3 жыл бұрын

Does that go for Bachmann As well.

@ModelTrainTechnology 3 жыл бұрын

Can you elaborate please; we're not sure what your question is.

@elleryparsons5766 3 жыл бұрын

@@ModelTrainTechnology can you Also use that on Bachmann?

@ModelTrainTechnology 3 жыл бұрын

You seem to be asking whether the Signaling System will work with BACHMAN track. The system is completely independent of the track, so yes, you can use it with any track system.

@strobelightaudio 3 жыл бұрын

does it work in single track blocks where trains can come from either direction? Also, what if train happens to stop where sensor lines up between cars?

@ModelTrainTechnology 3 жыл бұрын

You probably want a detector at the entrance/exit of each block. The sensor does not detect direction of travel. To the second question, this is more about physics. Depending on the scale, certainly for N and HO, you can back the sensor away from the track to give a wider beam, although intentionally our beam is very narrow. Alternately, aim the sensor slightly at an angle.

@rdanscale3416 2 жыл бұрын

O my Goodness that.. this.. I'm Numb all over what a Video what a Product we're can I please buy your Stuff at I've been wanting something like what your showing for as long as I've been in the Hobby I'm not Dumb by no means I built a pretty good model Railroad but when it comes technical stuff some of it is so overwhelming what you have to do.. too make it & what you have to Buy just to get it where it should work but it 🤷 don't unless you buy additional parts, in your Video you show A little Box I'm in N Scale that fits over a Sensor with a module a Very Simple one then the Light itself one that if you accidentally hit it you won't hurt it too much because it sets on a Magnet.. This Everything I want if the cost isn't too high and there easy to Get like at a Train Store or if you Sir sell them Direct and you can except Money Orders I'm hooked like a Fish just please tell me how easy I can aquire one.! One thing I'd like to Ask Sir can this light be set up like the Real Prototypical lights are on the UP and this may be the same on the BNSF around where I live which is Hutchinson Kansas the UP can shut the lights off in both directions or the UP can can have the light flashing say Yellow for one Direction say southbound and for Northbound traffic its Red can these lights be set similar to this if they Can't thats still ok for I'd just be so pleased to have one of your little systems and I'd show it off proudly... Thank you for Bringing this product out hopefully I can get my Hands ✋ on it soon put it on my Layout. Allen D RDA N Scale...

@ModelTrainTechnology 2 жыл бұрын

Thank you for the feedback!! Everything is available in the Model Train Technology Store: www.ModelTrainTechnology.com/buy Directional detection is a bit more complicated but we have some ideas about that for next year. Do they really shut the light off completely? It's not too difficult to add a feature that turns the light off after some amount of time. Will have to ponder that (and more research)

@josephbodine7283 2 жыл бұрын

Hi I am sold How do I order ?

@ModelTrainTechnology 2 жыл бұрын

Thanks for your interest!! Please visit the Store on our website: www.modeltraintechnology.com/buy We only sell direct.

@HillBillyRailRoad 3 жыл бұрын

Brother where can I get this for ho

@ModelTrainTechnology 3 жыл бұрын

All products are available for HO and O scale, in addition to N Scale.

@HillBillyRailRoad 3 жыл бұрын

@@ModelTrainTechnology where is the website for this

@ModelTrainTechnology 3 жыл бұрын

This is the link to the Detector and Signaling section in the store: modeltraintechnology.com/buy/?product_cat=detectors-and-block-signals

@fbaqueda Жыл бұрын

whats your website?

@ModelTrainTechnology Жыл бұрын

www.ModelTraintechnology.com

@fbaqueda Жыл бұрын

Thank you checking it out now

@jonathanpyle1375 3 жыл бұрын

These look amazing, please could you email me a catalogue and price list. The demonstration that you gave was superb, best wishes Jo. My email is

@ModelTrainTechnology 3 жыл бұрын

Thanks! Here is a link to the Catalog page: modeltraintechnology.com/catalog/ (suggest you edit out your email from the comment so you don't get more junk Mail. more than 20,000 views of this video)