NEW RCBS Rebel Press: Unboxing, Overview, Loading, Comparison

Рет қаралды 140,996

Күн бұрын

Full Story: bit.ly/3848mz9
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
There's a new single-stage reloading press in town from RCBS, and it's called the Rebel! I was fortunate to get my hands on the first "public copy" of the press, and in this video I'll get this press out fo the box, cover setup/mounting, load some 6.5 Creedmoor rounds, and compare it to the RCBS Rock Chucker Supreme. Plus an announcement you'll want to hear!
**Note: Correction: The RCBS Rebel has a slightly wider mounting pattern compared to the RCBS Rock Chucker Supreme. Be aware of this if you order an Inline Fabrication Ultramount. The correct mount/plate is #26 (Summit / Rebel).
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- RCBS
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about

Пікірлер: 276

@luxsteelshooters 4 жыл бұрын

Please rebuild the test you did 2019 to compare the Rebel vs Rockchucker. Would be interesting to see if it is more accurate than the good Rockchucker.

@lowfern 4 жыл бұрын

@@joeees7790 Yes that's a fantastic idea, always got a true comparison then for anything new

@mikerutchka1836 4 жыл бұрын

Was hoping to see a runout comparison, of the dummy cartidges you loaded, like you did in the 14 press shootout... otherwise, a very good informative vid!

@albertan9386 4 жыл бұрын

The silence about concentrically and shoulder bump consistency is deafening. Why RCBS decided not to use over-cam on the REBEL like the Rock Chucker and the PRAZI-PRESS is a mystery and, in my opinion, a mistake. A minor revision to the toggle block that would allow for cam-over in one guise and no cam-over with a simple reverse installation of the toggle block might be doable. For now, I'll keep my old Rock Chucker and skip the REBEL. If the dies and brass are up to it, the run out is virtually nil on every cartridge I load. This has been the case for many years, and I suspect many more years to come.

@garrytalley8009 2 жыл бұрын

@@albertan9386 I have over camming presses and those that are not. I think that the over-camming doesn't do much if anything. Of course you are entitled to your opinion. If anything pushing a shoulder back more than necessary is a negative thing. Think about it. If you have a die bottom out how is it going to go any further unless it crushes the die? If using neck sizing collet dies in fact you can damage many necks just with dealing with an over-camming press before getting your setting right. Pros and cons of everything. Hype in many cases like over-camming.

@Lucastrujillo59 4 жыл бұрын

Great looking press Thanks for showing

@SouthernGuy27 3 жыл бұрын

Very good presentation. This helped me out quite a bit.

@RaysGarage 4 жыл бұрын

Gavin, Thanks for showing us this new single stage, I’m sold! Looking forward to the upcoming giveaway, I’m all in! Cheers, Ray

@christopher9727 8 күн бұрын

.. Do you know Jesus Christ can set you free from sins and save you from hell today Jesus Christ is the only hope in this world no other gods will lead you to heaven There is no security or hope with out Jesus Christ in this world come and repent of all sins today Today is the day of salvation come to the loving savior Today repent and do not go to hell Come to Jesus Christ today Jesus Christ is only way to heaven Repent and follow him today seek his heart Jesus Christ can fill the emptiness he can fill the void Heaven and hell is real cone to the loving savior today Today is the day of salvation tomorrow might be to late come to the loving savior today Romans 6.23 For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord. John 3:16-21 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. 17 For God sent not his Son into the world to condemn the world; but that the world through him might be saved. 18 He that believeth on him is not condemned: but he that believeth not is condemned already, because he hath not believed in the name of the only begotten Son of God. 19 And this is the condemnation, that light is come into the world, and men loved darkness rather than light, because their deeds were evil. 20 For every one that doeth evil hateth the light, neither cometh to the light, lest his deeds should be reproved. 21 But he that doeth truth cometh to the light, that his deeds may be made manifest, that they are wrought in God. Mark 1.15 15 And saying, The time is fulfilled, and the kingdom of God is at hand: repent ye, and believe the gospel. 2 Peter 3:9 The Lord is not slack concerning his promise, as some men count slackness; but is longsuffering to us-ward, not willing that any should perish, but that all should come to repentance. Hebrews 11:6 6 But without faith it is impossible to please him: for he that cometh to God must believe that he is, and that he is a rewarder of them that diligently seek him. Jesus

@scottperson9487 4 жыл бұрын

NIce video. RCBS and Dillon are not afraid of improving on great, high selling and proven presses.

@richhiggins6056 4 жыл бұрын

Looks good. I've been using a rockchucker for years. The spent primer through ram discharge is an awsome upgrade.

@JJW3 3 жыл бұрын

Good video. I was on the fence between the Rock Chucker Supreme and the Rebel. I normally use a Lee turret press but I just bought the RCBS Rebel to accommodate large base .577/.450 Martini Henry dies, which wont fit in the Lee turret. The Martini Henry case is large, so the extra clearance and strength of the Rebel fit the bill.

@markyoung7470 2 жыл бұрын

I just got my new Rebel so far I love it, This is my second RCBS Press I have an old Jr Press that's at least forty years old and still running fine will probably set it up as a depriming station only. Converted the Rebel to the Hornady lock and load system, Wish Hornady would have made the bushing like a nut instead of rounded, hard to get it tight enough that it doesn't spin off when changing dies. Probably use some lock tight on the bushing and see if that help keeps the bushing locked in the press. Gavin would love to see a runout comparison of the two presses!

@rwmagnus 4 жыл бұрын

I expect both presses are good. I’m part of the 1% crowd as I use the RC Supreme on press priming system. Didn’t see a need to make the new press heavier. Never had an issue with spent primers. I put a piece of plastic with Velcro to take up the slack between the frame and back of primer catch assembly. Works 100%. I like RCBS its just time to market a new press. BTW my RC Supreme was about $65 less.

@Squib1911 4 жыл бұрын

Good unboxing and review Gavin.

@GotYo6 3 жыл бұрын

Love watching these videos!

@richlovin2173 4 жыл бұрын

A sensible set of improvements. Thanks for the video.

@christopher9727 8 күн бұрын

Do you know Jesus Christ can set you free from sins and save you from hell today Jesus Christ is the only hope in this world no other gods will lead you to heaven There is no security or hope with out Jesus Christ in this world come and repent of all sins today Today is the day of salvation come to the loving savior Today repent and do not go to hell Come to Jesus Christ today Jesus Christ is only way to heaven Repent and follow him today seek his heart Jesus Christ can fill the emptiness he can fill the void Heaven and hell is real cone to the loving savior today Today is the day of salvation tomorrow might be to late come to the loving savior today Romans 6.23 For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord. John 3:16-21 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. 17 For God sent not his Son into the world to condemn the world; but that the world through him might be saved. 18 He that believeth on him is not condemned: but he that believeth not is condemned already, because he hath not believed in the name of the only begotten Son of God. 19 And this is the condemnation, that light is come into the world, and men loved darkness rather than light, because their deeds were evil. 20 For every one that doeth evil hateth the light, neither cometh to the light, lest his deeds should be reproved. 21 But he that doeth truth cometh to the light, that his deeds may be made manifest, that they are wrought in God. Mark 1.15 15 And saying, The time is fulfilled, and the kingdom of God is at hand: repent ye, and believe the gospel. 2 Peter 3:9 The Lord is not slack concerning his promise, as some men count slackness; but is longsuffering to us-ward, not willing that any should perish, but that all should come to repentance. Hebrews 11:6 6 But without faith it is impossible to please him: for he that cometh to God must believe that he is, and that he is a rewarder of them that diligently seek him. Jesus

@richardnear4160 4 жыл бұрын

My RCBS RC2 does just fine for me👍. I do my priming with a RCBS hand priming tool

@pstewart5443 3 жыл бұрын

I use the RCBS bench mounted priming tool and OMG it is so fast. I can prime 100 cases in a touch over 4 minutes. Love my RC IV. That thing is so smooth and the cam over is so great. I am just not a fan of presses that don't cam over.

@rebelreloading5265 4 жыл бұрын

Woah! I have press envy 😅 And after reading through the comments I am happy to see this action elbow is steel not aluminum! Watch it until the end guys 😉

@chrissmith6883 4 жыл бұрын

Great looking press! Thanks for the review!

@christopher9727 8 күн бұрын

..... Do you know Jesus Christ can set you free from sins and save you from hell today Jesus Christ is the only hope in this world no other gods will lead you to heaven There is no security or hope with out Jesus Christ in this world come and repent of all sins today Today is the day of salvation come to the loving savior Today repent and do not go to hell Come to Jesus Christ today Jesus Christ is only way to heaven Repent and follow him today seek his heart Jesus Christ can fill the emptiness he can fill the void Heaven and hell is real cone to the loving savior today Today is the day of salvation tomorrow might be to late come to the loving savior today Romans 6.23 For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord. John 3:16-21 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. 17 For God sent not his Son into the world to condemn the world; but that the world through him might be saved. 18 He that believeth on him is not condemned: but he that believeth not is condemned already, because he hath not believed in the name of the only begotten Son of God. 19 And this is the condemnation, that light is come into the world, and men loved darkness rather than light, because their deeds were evil. 20 For every one that doeth evil hateth the light, neither cometh to the light, lest his deeds should be reproved. 21 But he that doeth truth cometh to the light, that his deeds may be made manifest, that they are wrought in God. Mark 1.15 15 And saying, The time is fulfilled, and the kingdom of God is at hand: repent ye, and believe the gospel. 2 Peter 3:9 The Lord is not slack concerning his promise, as some men count slackness; but is longsuffering to us-ward, not willing that any should perish, but that all should come to repentance. Hebrews 11:6 6 But without faith it is impossible to please him: for he that cometh to God must believe that he is, and that he is a rewarder of them that diligently seek him. Jesus

@bzbcustoms4520 3 жыл бұрын

I have an old junior I have used for years finally ordered one of these time for an upgrade

@Hill_Billy_Without_A_Hill 4 жыл бұрын

Looks like a good one, I like the primers fall through now on this model.

@catman928 4 жыл бұрын

When I bought a single stage press several years ago, ejection of the primers thru the ram, was the reason I did not shop RCBS. Now I may have to buy another single stage press.

@christopher9727 8 күн бұрын

.... Only Jesus Christ blood can cleanse us of are sins come to Jesus Christ today Romans 6:23 For the wages of sin is death, but the free gift of God is eternal life in Christ Jesus our Lord. Come to Jesus Christ today Jesus Christ is only way to heaven Repent and follow him today seek his heart Jesus Christ can fill the emptiness he can fill the void. The Holy Spirit can lead you guide and confort you through it all Heaven and hell is real cone to the loving savior today Today is the day of salvation tomorrow might be to late come to the loving savior today John 3:16-21 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. 17 For God sent not his Son into the world to condemn the world; but that the world through him might be saved. 18 He that believeth on him is not condemned: but he that believeth not is condemned already, because he hath not believed in the name of the only begotten Son of God. 19 And this is the condemnation, that light is come into the world, and men loved darkness rather than light, because their deeds were evil. 20 For every one that doeth evil hateth the light, neither cometh to the light, lest his deeds should be reproved. 21 But he that doeth truth cometh to the light, that his deeds may be made manifest, that they are wrought in God. Mark 1.15 15 And saying, The time is fulfilled, and the kingdom of God is at hand: repent ye, and believe the gospel. 2 Peter 3:9 The Lord is not slack concerning his promise, as some men count slackness; but is longsuffering to us-ward, not willing that any should perish, but that all should come to repentance. Hebrews 11:6 6 But without faith it is impossible to please him: for he that cometh to God must believe that he is, and that he is a rewarder of them that diligently seek him. Jesus

@kellyrick8201 4 жыл бұрын

Love my RCS but this looks amazing!

@wardo17 4 жыл бұрын

Love to have that. Not only for it's mass because anyone can have that but it's quality that counts

@capt.martin5169 3 жыл бұрын

Another great video, Sold Me! Thanks!

@rustyshackleford2723 4 жыл бұрын

Holy Shamoly, your back on track!!

@christopher9727 8 күн бұрын

This is blasphemy don't go to hell mocking the Father and Jesus Christ Jesus Christ is the only hope in this world no other gods will lead you to heaven There is no security or hope with out Jesus Christ in this world come and repent of all sins today Today is the day of salvation come to the loving savior Today repent and do not go to hell Come to Jesus Christ today Jesus Christ is only way to heaven Repent and follow him today seek his heart Jesus Christ can fill the emptiness he can fill the void Heaven and hell is real cone to the loving savior today Today is the day of salvation tomorrow might be to late come to the loving savior today Holy Spirit Can give you peace guidance and purpose and the Lord will John 3:16-21 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. 17 For God sent not his Son into the world to condemn the world; but that the world through him might be saved. 18 He that believeth on him is not condemned: but he that believeth not is condemned already, because he hath not believed in the name of the only begotten Son of God. 19 And this is the condemnation, that light is come into the world, and men loved darkness rather than light, because their deeds were evil. 20 For every one that doeth evil hateth the light, neither cometh to the light, lest his deeds should be reproved. 21 But he that doeth truth cometh to the light, that his deeds may be made manifest, that they are wrought in God. Mark 1.15 15 And saying, The time is fulfilled, and the kingdom of God is at hand: repent ye, and believe the gospel. 2 Peter 3:9 The Lord is not slack concerning his promise, as some men count slackness; but is longsuffering to us-ward, not willing that any should perish, but that all should come to repentance. Hebrews 11:6 6 But without faith it is impossible to please him: for he that cometh to God must believe that he is, and that he is a rewarder of them that diligently seek him. Jesus

@skurb24 4 жыл бұрын

Really enjoy all of your videos! Although I am not into reloading yet...you will be the reason I make my selection when I start! Keep up the great work!

@echosreloadingchamber7306 4 жыл бұрын

What about comparing the rock chucker Supreme against the rebel and do resizing and check neck concentricity and bullet concentricity using the same dies and the same caliber like 6.5. Supposedly the ram is supposed to be very tight with the cast iron Base??

@mackies9151 4 жыл бұрын

I'll use this to deprime and resize 9mm prior to tumbling brass for my xl750. So happy the spent primers fall out the bottom.

@dirtydirt7998 4 жыл бұрын

Check out the Lee APP press. It's perfect for what you're looking to do with it. You can also rig up your Dillon case feeder to feed it.

@H.R.6688 4 жыл бұрын

Yeah i been thinking about this since your video before.

@connormarek1028 4 жыл бұрын

this press is really cool! though i do wish they would upgrade the rick chucker with a better priming system kinda like redding uses and also give it a primer collection tube.

@a.k.4363 4 жыл бұрын

Great video!!

@michaelocchipinti6609 4 жыл бұрын

great presentation ,my 50 year old rockchucker is still going strong

@wadelandeche8632 4 жыл бұрын

Very nice strong press, it keeps thing simple! That's what I Like about single stage presses. I like to have total control and feedback as you stroke the press for each process. I am still rocking My RCBS BIG MAX press taking advantage of the leverage built into that older "O" Frame style. I would like to get a RCBS REBEL at some point!

@scottscheuerman6170 4 жыл бұрын

The Rockchucker press I use is old and still does the job i have no idea of its age but seems a lighter green than newer ones and uses a Bicycle handle instead of round black knob

@tomcooke6670 3 жыл бұрын

I would like to know the run out you got on the rounds you produced. Thanks

@stevenmarcus2709 Жыл бұрын

Me too, I have never owned an RCBS press until the rebel, I was surprised immediately at the sloppyness. The main bearings in the linkage have a pop to them at a certain point of the stroke. (Wallered out) and the ram has at least a 1/16” or 1/8” wiggle when it’s topped out in the stroke. Not cool. My handle will move side to side almost an inch.

@conservativesniperhunter7439 4 жыл бұрын

Great review as usual. I want one , I better start saving my pennies 😄

@bigald9560 4 жыл бұрын

I love the rock chucker. That's what I learned to reload on. I'm glad they tried to improve on such a top level design that has stood the test of time. I am eager to see where this press goes in the future.

@garrytalley8009 2 жыл бұрын

Nice video I do wish you would have mentioned the option of mounting the press on a stand which is definitely better than to bench top. I too like the fact they ditched the primer system. They are always in the way and don't work as well as stand alone hand or bench primer seating methods or tools. I do hope all your subscribed people are in the drawing. Be nice to win one of those.

@JJ-qy8xu 4 жыл бұрын

Yes! I just thinking I would like an upgrade.

@Bshwag 3 жыл бұрын

this looks nice I think I still like my summit better tons of space around the press for your hands.

@tacticalrabbit308 4 жыл бұрын

Rcbs makes some fine reloading products I have had no issues with mine and customer service is excellent my two presses are a rockchucker and I have the little partner press too

@josephesteves1372 4 жыл бұрын

I second that about the excellent customer service.

@russellguyton3109 3 жыл бұрын

I concur.

@megs4174 4 жыл бұрын

Where did it stand in the 14 press comparison or did you do all the test with the new rebel. If not I would like to see that in a video. Great video.

@frankponikvar9262 4 жыл бұрын

I'm impressed with the mass of the new press, however, call me ole fashion but I still prefer my old original RCBS rockchucker press I bought back in 1975. I prefer to prime my cases with my press with my primer tubes and primer mechanism. My press has the green plastic spent primer catcher and it never has gotten in the way like the newer rockchucker press. I load everything from .204 Ruger up to .416 Rigby and .470 nitro express and have plenty of room for them in my good ole faithful rockchucker press.

@RuggedSportsmen 4 жыл бұрын

I also use an old hand-me-down rockchucker. Incredible press

@coupesix 4 жыл бұрын

Nice I was born on 1975....hopefully your press is still going strong.

@jonlennon3348 4 жыл бұрын

I wonder if they grooved it so the grease goes all the way around it.

@thedetective8150 3 жыл бұрын

Gavin, please make a runout comparison of the dummy cartridges you loaded, as you did in your excellent 14 single stage press shootout video. I am sure many of your subscribers would like to see how the new RCBS Rebel press stacks up to the RCBS Rock Chucker Supreme Press which was the second-place champion in your 14 single stage press shootout video. Happy Thanksgiving 2020!

@CMBDIA 2 жыл бұрын

I don't NEED another press but this Rebel is looking mighty good right about now.

@markhorne5334 4 жыл бұрын

As an avid shooter and gun enthusiast I’ve been looking at all types of presses. Your videos are helping me make my final decision.

@joeldubose5762 4 жыл бұрын

Nice, looks solid.

@2charlesbryant 4 жыл бұрын

I would really like to try this big green Rebel for forming bass and keeping it straight

@cstoff6066 4 жыл бұрын

Get it bolted down with something a bit more substantial. Looks good but has a lot of wasted motion. Any way of pre-positioning the ram closer to the die base when resizing?

@kerryholifield7017 3 жыл бұрын

Think I'll stay with the rock chucker I've been really happy with it

@dybalaclint2778 4 жыл бұрын

I have the old junior thinking about up grading, I think I'm sold thanks

@eddietorres2441 4 жыл бұрын

Love it. Great for Rifle loads.

@johnygreen81 4 жыл бұрын

Definitely looking forward to these hitting the shelf as my old single stage press just recently gave up the ghost. I won’t mention the manufacturer, let’s just say I bought it a long time ago when I was on a very tight budget. But hey it did last almost 15 years before dying.

@Greyzonecompliant 2 жыл бұрын

Was it red?

@texpatriot8462 3 жыл бұрын

If you could show how a press handles spent primers, it would be a great standard item to go over.

@jimlaatsch6894 4 жыл бұрын

Lee APP.... And a rockchucker. That's all I need. This looks like it's more press than most will need

@garygade8365 2 жыл бұрын

I wish the Rebel came with shorter handles for operations that do not need all the pressure using a long handle ie. Priming, expanding. Erogermacis says this will take less wear and tear on your body. I have been using 2 shorter handles for years on my rock chucker.

@Burris19D 2 жыл бұрын

I also prefer a slightly shorter handle as well. Just curious, where did you get the shorter handles for your RC? I imagine I could have someone make me one for either press but would rather not have to find that person. I like the handle on the Lee Classic Turret I have for pistol calibers where you can adjust it to any length you want and it has a slight cant in the angle so you can move it where you want. A shame more presses don't utilize something similar for a custom fit. I believe 2-3" off the RC or Rebel would be perfect.

@matthewgarrett6371 3 жыл бұрын

Love the way he "decorates" the "set" by making sure the Chicom DROs are turned on, lathe & mill, when he is filming...lol

@nickwashburn723 2 жыл бұрын

they're always on in my shop. no reason to turn em off

@joekee5501 3 жыл бұрын

just started watching your channel love it i i plain to start reloading agian years ago i had a few 10ga shot guns and reloading was a must now iplain to reload hamd gun ammo 38 357 9mm and 40sw what i realy need is help on every thing i will need to get started press and all the goodies that go with it money is low can you tell what vids you have that can help thanks and keep up the good work

@jonathonwerner5968 3 жыл бұрын

I like the primer system on the rebel and the extra mass. But I actually like my supreme more. I'm one of the few that use the on primer system. I don't like greasing the ram. I've seen what grease does to a high use situation that it would endure. Unless there is a bushing Between the two to prevent wear on the frame... That's the truck mechanic in me talking. If it came with an ergo roller handle like the inline fabrication, and lighting in the frame, I'd be really interested in buying one. But I'll keep using my supreme.

@automaticsteve9548 4 жыл бұрын

I'm getting ready to start loading for a .338LM. This unit should be ideal for that caliber....a big honkin' case using a big honkin' press..

@Greyzonecompliant 3 жыл бұрын

The supreme press works fine with 338LM.

@Central_Desert 3 жыл бұрын

Gavin, Reloading 101 question: I have just finished mounting my new Rebel press to the bench, I found a clip in the packing box which I suspect is part of the press. Best described as a wire half circle clip. The shell holder sits fairly loose in the press, does this clip provide tension to the shell holder? You mention in your video the the shell holder should have tension when pushed in. Please advise. I have not used RCBS presses before, just Wilson in-line dies. Appreciate any assistance.

@LonelyRavenProductio 4 жыл бұрын

Looking forward to seeing the Giveaway!

@The10thManRules 4 жыл бұрын

Are you going to review the Lee APP press and accessories (bulge buster, bullet size, and especially the swager)?

@TheDornjmd 4 жыл бұрын

Is there any possibility we can data from this press put into the 14 press shootout data ranking? I've been eyeing this for a while and want to know how it stacks up.

@RadDadisRad 4 жыл бұрын

I’m thinking about getting one of these just for rifle rounds.

@christophersolis3552 4 жыл бұрын

I like the beefier look of rebel but I would like to see a comparison between rockchuker supreme and rebel loading a. 7mm mag or 300 mag.

@byzantinelegionnaire9469 11 ай бұрын

I was going to get the Rebel Plus kit... but I like the universal hand primer in the master kit much better and mid-south has the master kit at over $100 less than the plus kit... so I am going with the master kit and just buy the powder dispenser stand and other parts like shell holders myself.

@butlerbobby 3 жыл бұрын

Gavin; What grease do you use to minimize grease squeezing out of the shaft area? Would you recommend a NLGI #6 grease?

@LunaRendezvous 4 жыл бұрын

About the ejection of spent primers and primer crud, does the exit hole at the lower part of the ram protrude clear of the press body when the ram is in the upper most position, or does the exit hole get blocked by the press body and bearing surface, thus contaminating the bearing surface?

@garrytalley8009 2 жыл бұрын

So much about nothing. If over-greased it can clog the primer hole. All one has to do is run something trough it to clean it out. And it is ridiculous to think that primer residue is going to damage the ram contaminating the grease. Where do you fanatics about little things that mean nothing come from?

@billcamellre5726 3 жыл бұрын

Hi love this new press i'm new to shooting and would like to get into hand loading so this would be perfect for me thank you.

@someguy5543 4 жыл бұрын

What is your opinion on neck sizing vs full length sizing. When would you recommend to full length after how many neck sizes. Thanks

@chrisgilbert2152 4 жыл бұрын

It's RCBS, what can you say!!

@jims261 4 жыл бұрын

Would love to see you get one of the Area 419 presses and review it

@Ultimatereloader 4 жыл бұрын

It's planned, and I'll be first! :)

@nells1776 4 жыл бұрын

@@Ultimatereloader Geez, the 419 press is $1,200?!?!?! I like 419's stuff, but that's insanity...

@briankerr4512 4 жыл бұрын

Im happy with my Rock 2

@sheepdawg6946 4 жыл бұрын

I had my mind made up on the MEC marksman but have been a RCBS fan for decades. My Rockchucker Supreme is going to be a dedicated to full length resizing only. What's your opinion between the Marksman vs the Rebel?

@BrianClarkpharmd 4 жыл бұрын

Friday and a new gavintoobe vid! 👍

@Ultimatereloader 4 жыл бұрын

Glad you are enjoying them!

@cbhill1 4 жыл бұрын

5:37 “Deez Nuts” the laughs! I’m dying!!! 😂😂😂😂😂

@kirkwest6654 4 жыл бұрын

I had to go back...😭😭😅

@1straightcut 4 жыл бұрын

The Rebel looks like a nice press! I like the zerk fitting, no on-press priming and primer drop system. I definitely concur with the 90-95% of people using an alternate priming system. I use an RCBS bench primer and prefer it. Thanks for the review!

@usarmy308 2 жыл бұрын

You can disassemble and add a zerk to the RC.

@DanielCormier10x 4 жыл бұрын

The new RCBS Rebel and the RCBC Rock Chucker Supreme which press is the best for runout and datum length.thank

@sexdrive69691 3 жыл бұрын

Great video ,I'm looking to get into reloading now and would love to have one like this ,I've heard good things about the rock chucker ,and this Rebel being an improved version and stronger built makes me want to get one more than ever before , thank you for the video and information, if you giving one away please put my name in the drawing for one !

@TartanJack 4 жыл бұрын

I neither decap nor prime on my Rockchucker as I use a little Lee to decap and I prime on a Lee bench primer. So my Rockchucker is strictly for sizing, seating and crimping. Got it as a direct result of the 14 press shootout and I just wish I had gotten it sooner. By the way, didn't you use a Redding seating die in the 14 press shootout?

@Gearsofchocolate 2 жыл бұрын

With that grease fitting now installed on this newer press, just wondering what would be a good type of grease to use?

@justinrucinski7225 4 жыл бұрын

Looks nice

@tcon1479 4 жыл бұрын

Please do a video about the Area 419 Zero press!!

@albertan9386 4 жыл бұрын

There was no mention of bearing surface area. It looks to me like the Rock Chucker has more ram bearing surface area than the REBEL.

@PrendergastSean Жыл бұрын

I really enjoy your channel. Very informative and thorough, but you present well and keep it light. Thanks!

@iceroadtrucker2008 4 жыл бұрын

I have 2 XL650's and only do 200 or 300 rounds at a time. I love my RCBS auto prime tool. Can seat the primers so much easier and deeper!

@Anschutz270 2 жыл бұрын

Looking at this for 375H&H. My little jr3 is a little small.

@unclebob540i3 4 жыл бұрын

I have had my Rock Chucker for over 20 years and still works like day one. I made a mount with a couple pieces of 11 gauge sheet. That primer chute and zirk fitting are nice touches. If you're giving away one I'm in.

@GregAllen2 4 жыл бұрын

Thanks for the overview. I am looking for my first press and seriously considering the MEC Marksman. I like the idea of the front load (so I can see what I'm doing) as opposed to a side load. However, I have never reloaded before and I'm not sure which is easier. I will start reloading .45acp and then move into 6.5 Creedmoor. Do you think the new Rebel press would be a better choice? Thanks for all the great videos! Cheers, Greg

@GregAllen2 4 жыл бұрын

@@dave-yeahthatsme3925 Thanks Dave!

@user-ex9zm7bg3x 4 жыл бұрын

check out this guy's video comparing 14 different presses

@falba1492 3 жыл бұрын

Greg Allen - The RCBS Summit is also an awesome press. Extremely open, and did the best as far as concentricity on the review Galvin did on 14 presses.

@CZed75 4 жыл бұрын

Is there no way to attach a hose for spent primer collection like on the Redding Big Boss 2? Does the hole where the spent primers exit the ram go inside the frame at the top of the stroke? Therefore introducing all the spent primer crud into the frame ram interface?

@avidwaterfowler7522 4 жыл бұрын

Nick I agree 100%. What is sooooo damn hard about making this a full drop through ram? Mec did it right, although they don’t have a hose attached. Redding does it right as well. However, the new Lyman do it wrong as well so I don’t just want to just pick on rcbs. Introducing primer crud is not good for these to mating metal surfaces. Get it right, please!

@johnholmes4960 3 жыл бұрын

The rock chucker is better because the linkage is cast steel. Cast is stronger than flat bar. There is not that much tonnage applied to really make a difference, since the finished cartridge is the same.

@aaronbalfour1595 3 жыл бұрын

Where can I buy the mounts you're using for the Inline Fabrication to T-Track?

@G56AG 4 жыл бұрын

Looks like a nice improvement over my original Rock Chucker, its marked with the year of manufacture stamped on it, 1970. I bought it new in 1970, so I've had it a very long time.

@redrock425 2 жыл бұрын

A year before I was born. Mine from 1990 is still going strong. Had a few parts wear and lost a spring, sent FOC to me from RCBS no questions. Great service!

@RockingJOffroad 4 жыл бұрын

Does the Rebel have a shorter total height inside to press, in the video it sure looked like it

@blindboyjonny 2 жыл бұрын

I just got my rebel and noticed a quirk. With the handle up it’s nice and solid when you pull the handle down/ram up there is about half an inch of slop left and right on the handle. Anybody else have this? Something to worry about? What do you think?