Hi Iain, copied your video and left bulkhead in place just removing the mesh and metal straps, the extra movement on the seating has made a huge difference to our comfort. Many thanks.

I would love to get that nice flat cover for my never used back seats and saves some weight taking back seats out.

Took the whole thing out of my Jimny LCV and now the seats recline nicely, and the passenger seat reclines right down, if you remove the headrest you can cover it in a blanket and carry long, bulky items the length of the cabin 😀

I'm 5'10". Just went and tried sitting in my new LCV at the dealer. The mesh and partition will both have to go. Legroom is ok but the seat is absolutely bolt upright.

Waiting for mine from Falkirk! This has given me hope!

Great wee video Ian, hope to pick mine up from Falkirk within the next couple of weeks. I am just a shortarse at 5ft 7in, but reckon that I will do as you have done. With the passenger seat shoved forward and reclined back fully, should be able to carry longer items when required. Thanks for your helpful film.

Great video! I am happy to leave mesh and bulkhead in place, as I’ll be carrying lots of dogs and only short distances. But I am considering removing the black panels as per your video and put in a wooden floor to create a few more inches of headroom for the dogs and training equipment. Any comments?

It's a REAL shame the bulkhead wasn't designed to be reversed in some way. The mesh halves can be moved backwards but not the bottom plate - which also can't be fixed with the mesh moved backwards due to it affixing to the mesh when installed. Even an extra inch would have made a big difference.

It looks the same as my sz5 but it is missing the isofix brackets. I would say you can fit rear seats to it.

I've taken the mesh off on mine and made a couple of brackets up to hold the bulkhead. 🙂👍

Very cool video thanks

If you're thinking of selling the metal bulkhead, I'm an SZ5 owner with a dog.. would love to get my hands on one of those haha. Drop me a PM!

Great video Ian. I'm 6ft 6" and have just bought one ...so I plan to remove the bulkhead and seat and sit in the back...I'm only joking of course.

Very informative and professional video!

I have moved the whole assemby back about 15 cms by attaching it to the blanked off nuts above and below the rear window.

Hi Lain, Thank you very much! Nice and interesting video.

Will do mine too. One question though, can you still pass the yearly car inspection with your LCV Jimny without bulkhead? Or do you have to install it again before inspection?

Thanks for posting

Would you be able to install rear passenger seats?

great vid !! tnx

Nice video. At 6ft I've also had to take the bulkhead out of my Commercial Jimny, I just need to find a way to modify the mounting bars so that it's set back a couple of inches as I need the grill for my dog! Have you had any issues with the tyre pressure monitoring system? Apparently it's a new system which requires a tool to reset, and mine has been flashing since I got it (my car is the second car from the same dealer).

Maybe you can move it backward with spacers and then using the original screw holes

Hi Ian. Thanks for your video. I’m 6 foot dead do you reckon I could do a long drive in the Jimny with the bulkhead out and the seat reclined a bit? Also did you consider popping the drivers seat out and remounting the runners to take advantage of that bit of extra space?

Hi Iain. I am about to take delivery of my Jimny in a few weeks and am of a similar size to yourself. Did you do any further modifications to make the seat position more suitable? Thanks.

I was looking into a jimny and was about the pre order one when they went off sale, i wouldn't pay that price for it. Its £5000 more from the current facelift model when it wasreleased in that spec. Unless ur van reg it wouldn't be a problem but u should just get a hilux. Well you could just put in some land rover defender bench seats and u have seats in the back😂

Brilliant Iain, I am in exactly the same position - the distance to the pedals is not such an issue its the ramrod backrest which is causing backpain. Now you have removed the mesh and bulkhead do you think reversing the wire mesh and placing it back might give me a couple of mm?

Did it make any difference in seating comfort after removing bulkhead, net and metal arms?

in my country it is not possible to remove it (the law does not allow it). Do you think can I modify the attacks to move the bulkhead 10 cm back?

Hello do you know if this one is built in Japan still like the non commercial or in India, could you have a look at your black vin plate under the bonnet and it will say there if it’s a japan or Indian built Thanks

Very usefull vidéo thx

great video! nice work! i am 6.7 ft tall. do you think i can be comfortable in jimny?

Is it legal to fit back seats ?

Well done to get the Commercial Jimmy so soon, I thought it was going to be a few more months before they were at the dealerships. Can I ask did you get a good deal for it? how much did it cost? if you don't mind me asking? 👍🙂👍

I like 3 doors jimny

6' 2" and you buy a mini off roader? 🤭 My friend is 6' 4" and during the summer months drives an MG Midget. After squeezing himself into the driver's seat he makes the car look like a toy. No matter... I presently own a 2018 impreza hatchback and have recently looked at a Jimny. Just the two seater. Would love to own one but the 6 month waiting list is completely ridiculous.

How tall are you ?

It's incredible that this is how stuff ends up these days. A two year old Jimny wih four seats now sells for almost 160% of the list price of a brand new one. Suzuki obviously doesn't care since there is still a waiting list on the car. They're just happy about that. It's alovely car tough.

Can I ask how much these are retailing at including the Vat?

noice!

Hi mate i'm also 6.2 and it's rather uncomfortable for a long distance drive. I'm thinking to remove the bulkhead as well , did the ride comfort increase after you removed the bulkhead ?